Conjugated polymers comprise some of the most promising materials for new technologies such as organic field effect transistors, solar light harvesting technology and sensing devices. In spite of tremendous research initiatives in materials chemistry, the potential to optimize device performance and develop new technologies is remarkable. Understanding relationships between the structure of conjugated polymers and their electronic properties is critical to improving device performance. The design and synthesis of new materials which self-organize into ordered nanostructures creates opportunities to establish relationships between electronic properties and morphology or molecular packing. This thesis details our progress in the development of synthetic routes which provide access to new classes of conjugated polymers that contain dissimilar side chains that segregate or dissimilar conjugated blocks which phase separate, and summarizes our initial attempts to characterize these materials. Poly(1,4-phenylene ethynylene)s (PPEs) have been used in a variety of organic electronic applications, most notably as fluorescent sensors. Using traditional synthetic methods, asymmetrically disubstituted PPEs have irregular placement of side chains on the conjugated backbone. Herein, we establish the first synthetic route to an asymmetrically substituted regioregular PPEs. The initial PPEs in this study have different lengths of alkoxy side chains, and both regioregular and regiorandom analogs are synthesized and characterized for comparison. The design of amphiphilic structures provides additional opportunities for side chains to influence the molecular packing and electronic properties of conjugated polymers. A new class of regioregular, amphiphilic PPEs has been prepared bearing alkoxy and semifluoroalkoxy side chains, which have a tendency to phase separate. Fully conjugated block copolymers can provide access to interesting new morphologies as a result of phase separation of the conjugated blocks. In particular, donor-acceptor block copolymers that phase separate into electron rich and electron poor domains may be advantageous in organic electronic devices such as bulk heterojunction solar cells, of which the performance relies on precise control of the interface between electron donating and accepting materials. The availability of donor-acceptor block copolymers is limited, largely due to the challenges associated with synthesizing these materials. In this thesis, two new synthetic routes to donor-acceptor block copolymers are established. These methods both utilize the catalyst transfer condensation polymerization, which proceeds by a chain growth mechanism. The first example entails the synthesis of a monofunctionalized, telechelic poly(3-alkylthiophene) which can be coupled to electron accepting polymers in a subsequent reaction. The other method describes the first example of a one-pot synthesis of a donor-acceptor diblock copolymer. The methods of synthesis are described, and characterization of the block copolymers is reported.

<p>Label-free detection of DNA has been successfully demonstrated on field effect transistor (FET) based devices. Since conducting organic materials was discovered and have attracted more and more research efforts by their profound advantages, this work will focus on utilizing an organic field effect transistor (OFET) as DNA sensor.</p><p>An OFET constructed with a transporting fluidic channel, WetOFET, forms a fluid-polymer (active layer) interface where the probe DNA can be introduced. DNA hybridization and non-hybridization after injecting target DNA and non-target DNA were monitored by transistor characteristics. The Hysteresis area of transfer curve increased after DNA hybridization which may be caused by the increasing electrostatic screening induced by the increasing negative charge from target DNA. The different morphology of coating surface could also influence the OFET response.</p>

In this thesis, we investigate spin-dependent transport through ferromagnet-contacted single-walled carbon nanotubes (SWCNTs), in which charge transport shows the Fabry-Perot (FP) interference effect, the Kondo effect and the Coulomb blockade effect at low temperatures. Hysteric magnetoresistance (MR) is observed in all three transport regimes, which can be controlled by both the external magnetic field and the gate voltage. The MR in the FP interference regime can be well understood by a model considering the intrinsic electronic structure of SWCNTs and the quantum interference effect. In the strongly interacting Kondo regime, the Kondo effect is not suppressed by the presence of nearby ferromagnetism. Several observed MR features including the non-splitted zero-bias Kondo peak and positive MR switching can be explained by the strong Kondo effect and weak ferromagnetism in the leads. In the Coulomb blockade regime, several effects that can be associated with the magneto-Coulomb effect have been observed, and isolated spin accumulation and transport through the SWCNT quantum dot have been realized by a four-probe non-local measurements. We also studied charge transport behavior through organic semiconductor pentacene thin film transistors (OTFTs) in the limit of single- or a few molecular layers of pentacene films. The charge transport in these devices can be well explained by the multiple trapping and release model. The structural disorders induced by the physical and chemical causes, such as grain boundaries, interactions with gate insulator, metal contacts and ambient conditions can be responsible for the localized trap states in the ultrathin layer OTFTs, which are further confirmed by the electric force microscopy (EFM) measurements. / text

A long-term goal within the field of organic electronics has been to developflexible and functional devices, which can be processed and patterned withlow-cost and energy-efficient solution-based methods. This thesis presents anumber of functional paths towards the attainment of this goal via thedevelopment and demonstration of novel fabrication and patterningmethods involving the important organic-semiconductor family termedfullerenes.Fullerenes are soccer-shaped small molecules, with two often-employedexamples being the symmetric C60 molecule and its more soluble derivative[6,6]-phenyl-C61-butyric acid methyl ester (PCBM). We show that PCBM canbe photochemically transformed into a dimeric state in a bi-excited reactionprocess, and that the exposed material features a significantly reducedsolubility in common solvents as well as an effectively retained electronmobility. This attractive combination of material properties allows for adirect and resist-free lithographic patterning of electronic PCBM films downto a smallest feature size of 1 µm, using a simple and scalable two-stepprocess constituting light exposure and solution development. In a furtherdevelopment, it was shown that the two-step method was useful also in thearea-selective transformation of fullerene/conjugated-polymer blend films,as demonstrated through the realization of a functional complementary logiccircuit comprising a 5-stage ring oscillator.In another project, we have synthesized highly flexible, single-crystal C60nanorods with a solution-based self-assembly process termed liquid-liquidinterfacial precipitation. The 1-dimensional nanorods can be deposited fromtheir synthesis solution and employed as the active material in field-effecttransistor devices. Here, it was revealed that the as-fabricated nanorods canfeature an impressive electron mobility of 1.0 cm2 V-1 s-1, which is on par withthe performance of a work horse in the transistor field, viz. vacuumdeposited amorphous Si. We further demonstrated that the processability ofthe nanorods can be improved by a tuned light-exposure treatment, duringwhich the nanorod shell is polymerized while the high-mobility interior bulkis left intact. This has the desired consequence that stabile nanoroddispersions can be prepared in a wide range of solvents, and we anticipatethat functional electronic devices based on solution-processable nanorodscan be realized in a near future.

Les transistors organiques attirent actuellement beaucoup d'attention en raison des avantages uniques par rapport à leur homologue inorganique. En revanche, la compréhension physique du fonctionnement et du transport des porteurs de charge est très limitée. L'objectif de cette thèse est de contribuer à apporter une meilleure compréhension des transistors organiques. Le Chapitre 1 présente les semi-conducteurs organiques : le mécanisme de conduction, les paramètres essentiels, les matériaux typiques etc. Le Chapitre 2 discute des transistors organi-ques en termes de structures, de mécanismes de fonctionnement, de paramètres principaux et des procédés de fabrication. Le Chapitre 3 étudie la caractérisation statique. Après les méthodes classiques, la méthode de la fonc-tion Y est introduite. Subséquemment, des techniques pour extraire les paramètres principaux sont présentées sé-parément. Enfin, les résultats expérimentaux sur nos échantillons sont exposés. Sur la base des données mesurées, les travaux de modélisation sont présentés dans le chapitre 4. Premièrement, une solution de l'équation Poisson est introduite qui donne la distribution de potentiel et donc la distribution de porteurs dans le film organique. Avec la prise en compte des pièges, les résultats obtenus par simulation sont en bon accord avec les données expérimen-tales. A partir de mesures des caractéristiques de courant –tension effectuées à basse température, on propose une procédure d'analyse de la mobilité en utilisant l'intégrale de Kubo-Greenwood. Ensuite, prenant en compte la dis-tribution de porteurs dans le film organique, une solution de l'équation de Poisson est donnée et la mobilité effec-tive est calculée en fonction de la tension de grille et de la température. Le Chapitre 5 est consacré à l'analyse du bruit à basse fréquence. On étudie d'abord le bruit du canal où une domination du bruit provenant des contacts est observée. En conséquence, une méthode TLM pour l'extraction du bruit des contacts est présentée. Ensuite, un procédure d'analyse des sources de bruit dû au contact est aussi proposée. Les résultats de bruit obtenus sur des transistors organiques de différentes origines sont également discutés à la fin. / Organic transistors recently attract much attention because of their unique advantages over the conventional inorganic counterparts. However, the understanding of their operating mechanism and the carrier transport process are still very limited, this thesis is devoted to such a subject. Chapter 1 presents the organic semiconductors regarding carrier transport, parameters, typically applied materials. Chapter 2 describes the issues related to organic transistors: structure, operating mechanism, principal parameters and fabrication technologies. Chapter 3 deals with the static properties characterization. The commonly used methods are firstly presented and then the Y function method is introduced. Afterwards, the characterization methods for principles parameters are separately discussed. The experimental results on our organic transistors are finally described. Chapter 4 focuses on the mod-eling on the basis of the experimental data, regarding DC characteristics modeling with a solution for Poisson's equation, carrier mobility modeling with using Kubo-Greenwood integral as well as a theoretical analysis of OFETs' carrier mobility involving a solution of Poisson's equation. Chapter 5 analyzes the low-frequency noise in organic transistors. One firstly addresses the channel noise sources and then concentrates on the contact noise extraction and contact noise sources diagnosis. The noise measurements on other samples are also presented.

This master´s thesis deals with new perspective organic molecular materials. A theoretical part contains search themed on organic materials for optical and electronic devices with emphasis on diketopyrrolopyrrole derivatives. The aim of the experimental part was preparation of solutions, thin layers and prototypical planar electronic components from chosen diketopyrrolopyrrole derivatives and their optical and electric characterization. Obtained results are interpreted with perspective on application in organic electronic.

<p>New acceptor moieties with extended conjugation have been developed  for further understanding of structure-property relationships in donor-acceptor type semiconducting polymers. These diketopyrrolopyrrole or isoindigo based conjugated polymers have been demonstrated as functional materials in organic field effect transistors, photoacoustic imaging and organic electrochemical transistors. With demonstrations of semiconducting molecular design, we hope to spark new research directions especially on deeper investigation of charge transport dependence on chemical structures, and new design strategies of acceptor moieties with extended conjugation could be applied for targeted applications.</p>

Organic field-effect transistors (OFETs) have attracted tremendous attention due to their flexibility, transparency, easy processiblity and low cost of fabrication. High-performance OFETs are required for their potential applications in the organic electronic devices such as flexible display, integrated circuit, and radiofrequency identification tags. One of the major limiting factors in fabricating high-performance OFET is the large interfacial barrier between metal electrodes and OSC which results in low charge injection from the metal electrodes to OSC. In order to overcome the challenge of low charge injection, carbon nanotubes (CNTs) have been suggested as a promising electrode material for organic electronic devices. In this dissertation, we study the effect of carbon nanotube (CNT) density in CNT electrodes on the performance of organic field effect transistor (OFETs). The devices were fabricated by thermal evaporation of pentacene on the Pd/single walled CNT (SWCNT) electrodes where SWCNTs of different density (0-30/um) were aligned on Pd using dielectrophoresis (DEP) and cut via oxygen plasma etching to keep the length of nanotube short compared to the channel length. From the electronic transport measurements of 40 devices, we show that the average saturation mobility of the devices increased from 0.02 for zero SWCNT to 0.06, 0.13 and 0.19 cm2/Vs for low (1-5 /µm), medium (10-15 /µm) and high (25-30 /µm) SWCNT density in the electrodes, respectively. The increase is three, six and nine times for low, medium and high density SWCNTs in the electrode compared to the devices that did not contain any SWCNT. In addition, the current on-off ratio and on-current of the devices are increased up v to 40 times and 20 times with increasing SWCNT density in the electrodes. Our study shows that although a few nanotubes in the electrode can improve the OFET device performance, significant improvement can be achieved by maximizing SWCNT/OSC interfacial area. The improved OFET performance can be explained due to a reduced barrier height of SWCNT/pentacene interface compared to metal/pentacene interface which provides more efficient charge injection pathways with increased SWCNT/pentacene interfacial area.

Despite significant advances in the field of organic electronic devices, a complete and thorough theoretical understanding of their operation is still missing. This study aims to deepen the understanding of the underlying physics of organic field-effect transistors (OFETs) through analytical modeling, numerical device simulations and experimental validations of contact-induced performance improvements and traps. The thesis presents a comprehensive methodology for reliable parameter extraction for the contact resistance of OFETs using conventional extraction methods originally developed for silicon-based transistors. A benchmarking strategy is proposed for accurate and reliable parameter extraction, involving a comparative study of different extraction techniques to ensure the most precise results. The study investigates the experimentally proven performance gain of OFETs with contact engineering on oxidized metal electrodes. Theoretical analysis is performed to identify the root causes of the observed performance enhancement, providing valuable insight into the underlying physics of contact engineering and its impact on OFET performance. In addition, the thesis explores the impact of dynamic trapping on highfrequency transistor performance and presents innovative methods for characterizing traps. Through the use of TCAD simulations, a comprehensive study of the internal quantities of organic transistors is conducted. The study provides a critical step towards developing a physics-based compact model for OFETs that can capture the essential physics of the device. Overall, this thesis provides comprehensive guidelines for reliable parameter extraction and performance improvement of OFETs. It makes significant contributions to the understanding of their underlying physics and lays the foundation for the development of physics-based compact models for OFETs, which could potentially revolutionize the field of organic electronics.

A eletrônica digital desempenha papel essencial no desenvolvimento e manutenção dos padrões de vida em prática hoje no mundo. A peça fundamental para a criação desta era tecnológica é sem dúvidas o transistor. Com o advento de novos materiais, a busca por transistores que oferecem novas oportunidades de processamento e aplicação permitiu que uma nova área fosse criada: a eletrônica orgânica. Transistores de efeito de campo baseados em filmes finos de materiais orgânicos têm recebido grande atenção nas últimas décadas. Apresentamos um estudo experimental e teórico de transistores de efeito de campo a base de filmes finos orgânicos. Foram caracterizados transistores usando um derivado do pentaceno (TMTES-pentaceno) como camada ativa em um dispositivo feito sobre Si/SiO2. Mostramos que a inclusão do semicondutor orgânico em uma matriz polimérica isolante ajuda a manter a estabilidade termo mecânica do dispositivo. Foi desenvolvido um modelo que levasse em conta as resistências parasíticas para explicar o comportamento do transistor em função da temperatura. Também foram construídos e caracterizados transistores usando rr-P3HT como semicondutor e PMMA como isolantes. Apresentamos transistores do tipo Top-Gate e Bottom-Gate com mobilidade máxima de 7 x 10-3 cm2/V.s. Valores de razão ON/OFF de ~ 900 foram encontrados nos transistores otimizados. O comportamento dos transistores é analisado em função da temperatura e os modelos de aproximação de canal gradual e de Vissenberg-Matters foram aplicados para extração dos parâmetros de interesse. Por fim, apresentamos um modelo de corrente de canal baseado na resolução 2D numérica da equação de Poisson usando as idéias de Vissenberg-Matters para a concentração de cargas em função do potencial local. O modelo, embora ainda nos primeiros estágios de desenvolvimento, prevê a saturação da corrente nas curvas de saída simuladas sem limitações de regime de validade. / Digital electronics plays an essential role in the development and maintenance of living standards into practice in the world today. The cornerstone for the creation of this technological age is undoubtedly the transistor. With the advent of new materials, the search for transistors that offer new opportunities in processing and application allowed a new area to be created: the organic electronics. Field effect transistors based on organic thin films have received great attention in recent decades. We report an experimental and theoretical study of field effect transistors based on organic thin films. We characterized transistors manufactured using a derivative of pentacene (TMTES-pentacene) as the active layer in a device and using Si/SiO2 as gate and insulator. We show that the inclusion of the organic semiconductor in an insulating polymeric matrix helps to maintain the termo-mechanical stability of the device. A model was developed that take into account the parasitic resistances and to explain the behavior of the transistor as a function of temperature. We also present the manufacturing and characterization process of transistors using rr-P3HT as semiconductor and PMMA as insulator. We report Top-Gate and Bottom-Gate transistors with maximum mobility of 7 x 10-3 cm2/V.s. The maximun ON/OFF ratio of ~ 900 was found for the optimized transistors. The behavior of the transistors was analyzed as a function of temperature and both gradual channel approximation and Vissenberg-Matters models were applied for extracting the parameters. Finally, we present a channel current model based on the resolution of 2D numerical Poisson equation using the ideas of Vissenberg-Matters to the calculate the concentration of charges due to the local potential. The model, although still in the early stages of development, predicts the saturation current at output simulated curves with no limitation of regime validity.