321 |
Optimizing Airport Runway Performance by Managing Pavement InfrastructurePinto, Samantha Theresa January 2012 (has links)
The research described herein is composed of four major areas of practice. It examines the overall performance of runways and provides tools designed to improve current runway operations and management with particular emphasis on contaminated surfaces.
Presented in this thesis is an overview of how to design airport pavements in order to achieve optimal friction by specifically focusing on material selection and construction techniques for rigid and flexible pavements. Rubber buildup and the impact rubber accumulation has on decreasing runway friction, particularly in a range of climatic conditions, is discussed. Four commonly used rubber removal techniques are presented and evaluated. Through this research, an analytical hierarchy process (AHP) decision making protocol was developed for incorporation into airport pavement management systems (APMS).
Runway surface condition reporting practices used at the Region of Waterloo International Airport are evaluated and recommendations for improving current practices are identified. Runway surface condition reporting can be improved by removing subjectivity, reporting conditions to pilots in real time, standardizing terminology and measurement techniques, and including runway pictures or sketches to identify contaminant locations where possible. Reports should be incorporated and stored in the APMS.
Aircraft braking systems and their effects on landing distances under contaminated conditions are discussed. This thesis presents a proposed solution for monitoring and measuring contaminated runway surfaces and identifying the risks associated with aircraft landing through using the Braking Availability Tester (BAT). Also proposed in this thesis is a testing framework for validating the Braking Availability Tester. The proposed BAT measures interaction between aircraft antiskid braking systems and runway contaminants to determine landing distances more accurately.
Finally, this thesis includes a discussion explaining how pavement design, contaminant removal, results from friction tests, and results from the BAT can be incorporated into airport pavement management systems. APMS data can be analyzed to economically optimize and prioritize scheduling of pavement maintenance, preservation and rehabilitation treatments to maintain a high level of service, thereby contributing to runway safety and optimization.
|
322 |
Lietuvos svarbiausių magistralinių kelių eksploatacinių savybių kitimo analizė / Analysis of the Change in Service Properties of the Most Important Main Roads in LithuaniaStankevičiūtė, Diana 22 June 2010 (has links)
Prieš rengiant kelių investicinius projektus surenkami ir detaliai analizuojami esami kelių eksploatacinių rodiklių duomenys ir jų reglamentuotų norminių reikšmių atitiktis. Baigiamajame darbe išanalizuoti automobilių kelių asfaltbetonio dangos būklės, patikimumo bei šių rodiklių gavimo ir apdorojimo metodai. Pateikiamas automobilių kelių asfaltbetonio dangos reikiamų eksploatacinių rodiklių teorinis pagrindimas, reglamentuotos norminės reikšmės bei eksploatacinių rodiklių gerinimo svarba. Naudojantis tyrimų, atliktų Lietuvos svarbiausiuose magistraliniuose keliuose A1 Vilnius – Kaunas - Klaipėda ir A5 Kaunas – Marijampolė - Suvalkai, duomenimis, atlikta pagrindinių eksploatacinių rodiklių - dangos lygumo, rato su danga sukibimo koeficiento, dangos suirimo masto rodiklio, konstrukcijos deformacijos modulio bei provėžų gylio analizė ir šių rodiklių kitimas laiko atžvilgiu. Nustatyta dangos būklę apibūdinančių rodiklių sietis. Analizės pagrindu pateikti rekomenduojami leistinieji dangos lygumo rodikliai. Pateiktos išvados ir rekomendacijos. Baigiamojo darbo aprašomojo skyriaus apimtis – 89 psl., 17 lentelių, 90 paveikslų, 44 bibliografiniai šaltiniai. / Before the preparation of highway investment projects, the available data of highway maintenance indices are collected and analysed and their conformity with the standard values is established. The thesis deals with the analysis of reliability of the condition of highway asphalt concrete pavement and the indices collection and procession methods. The thesis includes the theoretical grounding of the necessary maintenance indices of the highway asphalt concrete pavement, standard values and the importance of improvement of the maintenance indices. Using the data of the testing performed in the main Lithuanian highways A1 Vilnius – Kaunas - Klaipėda and A5 Kaunas – Marijampolė - Suvalkai, the analysis of the basic maintenance indices, i.e. pavement smoothness, wheel adherence coefficient, pavement breakup degree index, construction deformation module and furrow depth, and the change of such indices in the terms of time has been carried out. The link between the indices characterising the condition of the pavement has been determined. Basing on the analysis, the recommended permitted pavement smoothness indices are presented. The conclusions and recommendations of the thesis are introduced. Theses consist of: 89 p. text without appendixes, 90 pictures, 17 tables, 44 bibliographical entries.
|
323 |
Kelių tampriosios dangos konstrukcijų savybių įtaka jų viršutinio sluoksnio eksploataciniams rodikliams / Influence of the properties of flexible road pavement structure on the service indices of wearing coursesBulevičius, Matas 25 February 2014 (has links)
Disertacijos tikslas – parengti magistralinių automobilių kelių asfaltbetoninės dangos eksploatacinių rodiklių prognozės matematinius modelius, atsižvelgiant į tampriosios dangos konstrukcijos savybes ir transporto priemonių (TP) eismo intensyvumą (EI). Darbe iškelti šie svarbiausieji uždaviniai: išanalizuoti automobilių kelių asfaltbetoninės (AB) dangos eksploatacinius rodiklius lemiančius svarbiausius veiksnius ir atskleisti šių rodiklių blogėjimo priežastis; atlikti magistralinių kelių dangos konstrukcijų (KDK) sluoksniams naudojamų medžiagų kokybės rodiklių tyrimus; nustatyti AB dangos komponentinės sudėties, fizinių bei mechaninių rodiklių ir AB mišiniams naudojamų medžiagų kokybės rodiklių sietį; ištirti AB dangos lygumo ir provėžų gylio kitėjimo dėsningumus; nustatyti AB dangos, kitų (KDK) sluoksnių medžiagų kokybės rodiklių sietį; parinkti dvi racionalias magistralinių kelių tampriosios dangos konstrukcijas (skirtingam TP eismui).
Disertaciją sudaro įvadas, keturi skyriai, rezultatų apibendrinimas, naudotos literatūros ir autoriaus publikacijų disertacijos tema sąrašai ir priedai.
Įvade aptarta tiriamoji problema, darbo aktualumas, tyrimų objektas, darbo tikslas ir uždaviniai, tyrimų metodika, darbo mokslinis naujumas, darbo rezultatų praktinė vertė ir ginamieji teiginiai.
Pirmajame skyriuje išnagrinėti įvairių šalių mokslininkų atlikti automobilių kelių asfaltinės dangos bei jos konstrukcijos eksploatacinių rodiklių ir jų funkcionavimo trukmės tyrimai.
Antrajame... [toliau žr. visą tekstą] / The aim of the dissertation is based on the properties of flexible road pavement structures to develop a mathematical models for predicting the performance of wearing courses used in the pavements of the main roads. The main tasks of the dissertation are as follows: to analyze the main factors influencing the service indices of asphalt concrete pavements and to determine their reasons; to investigate the quality of materials and mixtures used in pavement structural layers of the main roads; to determine the interaction between asphalt concrete pavement composition and the quality indices of mixture materials; to study regularities of the change in pavement roughness and rut depth; to determine the interaction between the quality indices of materials used in pavement structural layers; to select two rational flexible pavement structures for the main roads (for the different traffic volume).
The dissertation consists of introduction, four chapters, general conclusions, the list of references and the list of author’s publications on the topic of the dissertation, addenda.
Introduction describes the studied problem, topicality of the problem, the object of research, also the aim and tasks, research methodology, scientific novelty, practical value of the results and the defended propositions.
Chapter 1 gives the analysis of scientific researches made by different countries in the field of the performance of asphalt concrete pavements and their structures, duration of their... [to full text]
|
324 |
Influence of the properties of flexible road pavement structure on the service indices of wearing courses / Kelių tampriosios dangos konstrukcijų savybių įtaka jų viršutinio sluoksnio eksploataciniams rodikliamsBulevičius, Matas 25 February 2014 (has links)
The aim of the dissertation is based on the properties of flexible road pavement structures to develop a mathematical models for predicting the performance of wearing courses used in the pavements of the main roads. The main tasks of the dissertation are as follows: to analyze the main factors influencing the service indices of asphalt concrete pavements and to determine their reasons; to investigate the quality of materials and mixtures used in pavement structural layers of the main roads; to determine the interaction between asphalt concrete pavement composition and the quality indices of mixture materials; to study regularities of the change in pavement roughness and rut depth; to determine the interaction between the quality indices of materials used in pavement structural layers; to select two rational flexible pavement structures for the main roads (for the different traffic volume).
The dissertation consists of introduction, four chapters, general conclusions, the list of references and the list of author’s publications on the topic of the dissertation, addenda.
Introduction describes the studied problem, topicality of the problem, the object of research, also the aim and tasks, research methodology, scientific novelty, practical value of the results and the defended propositions.
Chapter 1 gives the analysis of scientific researches made by different countries in the field of the performance of asphalt concrete pavements and their structures, duration of their... [to full text] / Disertacijos tikslas – parengti magistralinių automobilių kelių asfaltbetoninės dangos eksploatacinių rodiklių prognozės matematinius modelius, atsižvelgiant į tampriosios dangos konstrukcijos savybes ir transporto priemonių (TP) eismo intensyvumą (EI). Darbe iškelti šie svarbiausieji uždaviniai: išanalizuoti automobilių kelių asfaltbetoninės (AB) dangos eksploatacinius rodiklius lemiančius svarbiausius veiksnius ir atskleisti šių rodiklių blogėjimo priežastis; atlikti magistralinių kelių dangos konstrukcijų (KDK) sluoksniams naudojamų medžiagų kokybės rodiklių tyrimus; nustatyti AB dangos komponentinės sudėties, fizinių bei mechaninių rodiklių ir AB mišiniams naudojamų medžiagų kokybės rodiklių sietį; ištirti AB dangos lygumo ir provėžų gylio kitėjimo dėsningumus; nustatyti AB dangos, kitų (KDK) sluoksnių medžiagų kokybės rodiklių sietį; parinkti dvi racionalias magistralinių kelių tampriosios dangos konstrukcijas (skirtingam TP eismui).
Disertaciją sudaro įvadas, keturi skyriai, rezultatų apibendrinimas, naudotos literatūros ir autoriaus publikacijų disertacijos tema sąrašai ir priedai.
Įvade aptarta tiriamoji problema, darbo aktualumas, tyrimų objektas, darbo tikslas ir uždaviniai, tyrimų metodika, darbo mokslinis naujumas, darbo rezultatų praktinė vertė ir ginamieji teiginiai.
Pirmajame skyriuje išnagrinėti įvairių šalių mokslininkų atlikti automobilių kelių asfaltinės dangos bei jos konstrukcijos eksploatacinių rodiklių ir jų funkcionavimo trukmės tyrimai.
Antrajame... [toliau žr. visą tekstą]
|
325 |
Aspects of the design and behaviour of road structures incorporating lightly cementitious layersDe Beer, Morris 28 July 2008 (has links)
Please read the abstract in the section, 00front, of this document / Thesis (DPhil)--University of Pretoria, 2008. / Civil Engineering / unrestricted
|
326 |
Využití dat pro systém hospodaření s vozovkou na silnicích II. a III. tříd k posouzení účinků vnějších vlivů na povrch vozovek / Usage of data for the pavement management system on roads II. and III. classes to assess the effects of external influences on the road surfaceSkořepová, Eliška January 2022 (has links)
The master thesis is focused on sorting collected primary data, their subsequent analysis and further comparison in the field of road defects. The collection of pavement failures was done by visual inspection with its recording to a computer for the pavement management system. The data later underwent detailed analysis with the aim to find a potential link between the road defect and the location of the damaged section. The study took place on 2nd and 3rd class roads in the Liberec Region, with special focus on those located near forests. The data collection itself took place in the Liberec Region in 2021. The processing and subsequent evaluation of collected data was done thanks to the availability of comparable data sets from 2014 and 2019 to 2021, so the development of road defects of the selected road network in relation to the surrounding afforestation could be assessed. The last part of this master thesis compares results in different classification levels, time periods and levels of afforestation.
|
327 |
Comparison of Several Project Level Pavement Condition Prediction ModelsNimmatoori, Praneeth January 2009 (has links)
No description available.
|
328 |
Characterization of cracks on ultra thin continuously reinforced concrete pavementsGerber, Johan Andries Kritzinger 03 1900 (has links)
Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: The southbound screener lane of the Heidelberg Traffic Control Centre received structural
improvements by means of an ultra thin continuously reinforced concrete pavement
(UTCRCP) overlay. This experimental overlay forms part of the South African National
Roads Agency Limited’s innovative highway repair strategy on existing pavements that have
exceeded design life. The primary objective of this study was to characterize the UTCRCP
overlay with regard to crack spacing formation under accelerated pavement testing (APT).
Characterization comprised of empirical modelling techniques, statistical analysis, non
destructive testing and software simulations. Pavement deflection responses were
empirically and linear elastically converted to input parameters. These parameters were
used in the mean crack spacing prediction model of the Mechanistic-Empirical Pavement
Design Guide (M-E PDG). Observed cracking under APT was recorded and analyzed by
means of descriptive statistics. The outcome of the M-E PDG’s mean crack spacing and the
statistics of the observed cracking were evaluated against cncPave simulations.
Initial shrinkage crack formations ranged from 500 mm to 900 mm, with a mean spacing of
695 mm. Subsequent secondary cracking reduced the segments, delineated by initial
cracking, to intervals consisting of 100 mm to 350 mm. A statistical analysis of the observed
cracking indicated that traffic had little effect on the transverse crack spacing formation. The
observed cracks yielded a mean spacing of 296 mm, compared to the 186 mm of the M-E
PDG mean crack spacing calculation. cncPave simulations indicated that the expected
range of cracking would fall between 237 mm and 350 mm with a probability of 50% that
crack spacing would exceed 265 mm. The 50th percentile of the observed cracks resulted in
a spacing of 233 mm. The APT project was limited to a single test section. No pavement
failures occurred during the APT project. A total of 2.8 million 80 kN load repetitions were
applied to the UTCRCP. However circular crack formations regarded as a punchout
development have formed on the UTCRCP test section.
Circular cracks formed around weaknesses in the pavement system. The prediction of these
punchout formations incorporates the mean crack spacing result. Occurrence of mean crack
spacing forms part of a crack spacing distribution defined by a range. Therefore designing a
punchout prediction model for UTCRCP should include the characteristics and range of the
crack pattern and not merely the mean crack spacing value.
Key Words: UTCRCP, APT, Mean Crack Spacing, Punchout, Descriptive Statistics,
cncPave, M-E PDG, Transverse Cracks, Dense Liquid Foundation, Elastic Solid Foundation. / AFRIKAANSE OPSOMMING: Die suidwaartse moniteerings laan van die Heidelberg Verkeersbeheer Sentrum, het
strukturele verbetering ondergaan deur die konstruksie van ‘n ultradun aaneen-gewapende
betonplaveisel (UDAGBP) wat dien as ‘n deklaag. Hierdie eksperimentele deklaag is deel
van die Suid-Afrikaanse Nasionale Paaie Aggentskap Beperk (SANRAL) se vernuftige
deurpadherstelstrategie vir bestaande deurpaaie waarvan die ontwerplewe verstryk het. Die
primêre doel van hierdie studie is om die UDAGBP te karakteriseer, met betrekking tot
kraakspasiëring, deur middel van Versnelde Plaveisel Toetsing (VPT).
Die karakteriseringsproses het bestaan uit empiriese moduleringstegnieke, statistiese
ontleding, nie-destruktiewe toetsmetodologieë en sagtewaresimulasies. Die plaveiseldefleksiegedrag
is empiries en linieêr elasties ontleed en omgeskakel na invoerparameters.
Hierdie parameters is gebruik in die peilingsmodel vir gemiddelde kraakspasiëring van die
Meganisties-Empiries Plaveisel Ontwerpsgids (M-E POG). Waargenome kraakspasiëring na
die afloop van VPT is opgeteken en deur middel van beskrywende statistiek ontleed. Die
resultate van die M-E POG se gemiddelde kraakspasiëring en die statistiese ontleding van
die waargenome krake is geëvalueer teenoor cncPave simulasies.
Aanvanklike krimpingskrake het gevorm met wisselende kraakspasiëring tussen 500 mm en
900 mm met ‘n gemiddelde spasiëring van 695 mm. Daaropvolgende krake het die
aanvanklike segmente, wat gevorm het tydens die aanvanklike krimpingskrake, verkort na
intervalle van 100 mm tot 350 mm. ‘n Statistiese ontleding van die waargeneemde krake het
aangedui dat verkeer weinig ‘n aandeel het in die dwarskraak-vormingsproses. Die
waargenome krake het ‘n gemiddelde spasiëring van 296 mm in vergelyking met 186 mm
van die M-E POG se gemiddelde kraakspasiëring berekening. cncPave simulasies het
aangedui dat die verwagte kraakspasiëringsgrense tussen 237 mm en 350 mm is en ‘n 50%
waarskynlikheid dat die kraakspasiëring meer as 265 mm is. Die VPT projek is beperk tot ‘n
enkele toetsseksie. Geen plaveiselfalings is waargeneem gedurende die VPT projek nie. In
totaal was 2.8 miljoen as-lasherhalings aangewend op die UDAGBP. Daar het egeter
sirkelvormige kraakformasies, wat beskou word as ponsswigting, ontwikkel op die UDAGBP
toetsseksie.
Sirkelvormige kraakpatrone het gevorm rondom swak plekke in die plaveisel. Die
peilingsmodelle van hierdie ponsswigting maak gebruik van die gimiddelde
kraakspasiëringsresultaat. Die verskynsel van gemiddelde kraakspasiëring in hierdie studie
is deel van ‘n kraakspasiëringsverdeling, gedefinieerd deur ‘n spasiëringsgrens. Daarom
moet die kraakspasiëringskarakteristieke en spasiëringsgrense in ag geneem word in die ontwerpsproses van ‘n UDAGBP ponsswigting-peilings-model, nie slegs die waarde van die
gemiddelde kraakspasiëring nie.
Sleutel woorde: UDAGBP, VPT, Gemiddelde Kraakspasiëring, Ponsswigting, Beskrywende
Statistiek, cncPave, M-E POG, Transversale Krake, Digte Vloeistof Fondasie, Elasties-
Soliede Fondasie.
|
329 |
Comportamento de pavimentos de concreto estruturalmente armados sob carregamentos estáticos e repetidos / Structurally reinforced concrete pavement behavior under static and cyclic loadsMaggi, Patrícia Lizi de Oliveira 05 April 2004 (has links)
Apresenta-se um trabalho numérico e experimental, com o objetivo de estudar o comportamento dos pavimentos de concreto estruturalmente armados, quando submetidos a forças verticais estáticas e repetidas. Avalia-se a contribuição da armadura de flexão, na resistência de placas de concreto apoiadas sobre meio elástico. Verifica-se experimentalmente o modo de ruína de placas submetidas a carregamento monotônico e a carregamento repetido, com e sem armadura, e acompanha-se o desenvolvimento das fissuras no concreto e das deformações no aço. Comparam-se os resultados obtidos, com as recomendações da NBR 6118:2003, para o dimensionamento de estruturas submetidas à fadiga. É desenvolvido modelo numérico capaz de representar a interface do solo com a placa do pavimento, a fissuração do concreto, a contribuição da armadura e o comportamento pós-fissuração. Com auxílio do modelo numérico, validado a partir dos resultados experimentais, estuda-se a influência de alguns parâmetros importantes para o dimensionamento dos pavimentos, tais como: capacidade de suporte da fundação, espessura das placas, área de aço, dimensões das placas em planta, posição de aplicação da força e presença de juntas de transferência de deslocamento. Os resultados experimentais mostram uma significativa contribuição da armadura positiva na resistência de placas isoladas sob forças verticais centradas. Verificou-se que as forças repetidas provocam fadiga do aço e que o número de ciclos depende da deformação provocada na armadura. A partir dos resultados são traçadas diretrizes para o dimensionamento, no qual devem ser considerados os momentos positivos e os negativos, e deve ser feita a verificação da fadiga do concreto e da armadura / A numerical and experimental study on the behavior of structurally reinforced concrete pavement under vertical static and repeated load is presented. The contribution of bending reinforcement to the strength of concrete slab is assessed. It is experimentally verified the fracture of reinforced and plain concrete slabs under monotonic loads and under cyclic loads. The concrete cracking and the strain on steel are monitored. The results are compared to the brazilian code recommendations to the design of structures under fatigue. A numerical model that represents the soil-slab interface, the concrete cracking, the reinforcement contribution and the tension stiffening behavior is developed. Some important parameters to the pavement design are analyzed using this finite element model, whose reliability was verified to experimental results. These parameters are: the soil capacity; the slab thickness; reinforcement ratio; slab dimensions; load positions; and joints conditions. The tests data show an important contribution of the positive reinforcement on the strength of an isolated slab with centered load. It has been verified the fatigue of the steel. The number of cycles depends on the reinforcement strain. The results are used to propose some directions to the design. The positive and negative bending moments have to be considered and the fatigue on the concrete and on the reinforcement has to be verified
|
330 |
Análise do desempenho estrutural e hidráulico de um pavimento permeável com revestimento de blocos de concreto unidirecionalmente articulados. / Hydraulic and structural performance analysis of a permeable pavement with articulated concrete block surface layer.Ono, Bruno Watanabe 13 March 2018 (has links)
O emprego de pavimentos permeáveis tem se tornado cada vez mais necessário como medida compensatória para amortecer as vazões de pico e atenuar os impactos gerados pelas chuvas torrenciais em áreas altamente urbanizadas. Dentre os materiais convencionalmente adotados como revestimento permeável no contexto nacional destacam-se os blocos de concreto intertravados (BCI) e o asfalto poroso. No entanto, internacionalmente, existem materiais alternativos que podem apresentar permeabilidade igual ou até mesmo superior. Sob esse prisma, convém destacar o uso dos blocos de concreto articulados (BCA), recentemente adotados nos Estados Unidos e na Coréia do Sul, cuja capacidade de infiltração vem mostrando-se bastante promissora. Diferentemente dos blocos intertravados, os BCA foram projetados para trabalhar em conjunto, já que são interconectados por meio do encaixe das articulações unidirecionais de cada peça, sobrepostas umas às outras, dispensando assim o uso de material de rejunte, o que por sua vez aumenta a permeabilidade do revestimento. Contudo, embora o desempenho hidráulico aparente ser eficaz, questiona-se se o pavimento de blocos de concreto articulados (PBCA) comporta-se de forma igualmente satisfatória em termos estruturais. Nesse sentido, visando avaliar o desempenho estrutural e hidráulico de um pavimento permeável de BCA, foi construída uma pista experimental (20 x 5 m) no Campus da USP, adotando-se dois tipos de base, uma de agregado reciclado (RCD) e outra de agregado natural (brita 1). Na análise estrutural utilizaram-se como parâmetros de avaliação as deflexões máximas obtidas via FWD (Falling Weight Deflectometer), a eficiência de transferência de carga (LTE - Load Transfer Efficiency) e por fim, os módulos de resiliência retroanalisados para cada camada. Ademais, a pesquisa ainda avaliou a influência da presença de fissuras ou trincas nos blocos no desempenho estrutural do pavimento, já que acabaram tornando-se recorrentes em ambas as seções avaliadas. Já na avaliação hidráulica, monitorou-se a taxa de infiltração in situ ao longo de quase vinte meses. Complementarmente, foram realizadas ainda avaliações laboratoriais dos materiais empregados e funcionais do pavimento. A análise estrutural indicou que o sentido articulado do BCA obteve respostas estruturais nitidamente melhores que o sentido não articulado em termos de módulo de resiliência, deflexões máximas e LTE, evidenciando que de fato as articulações conferem intertravamento ao pavimento, próximo ao propiciado pela areia de rejunte no BCI. A base de RCD por apresentar uma distribuição granulométrica mais bem distribuída do que a brita 1, também obteve melhores resultados. Já a presença de trincas ou fissuras nos blocos não acarretou comprometimento no desempenho estrutural da pista experimental, devido ao baixo grau de severidade da maioria das patologias encontradas, como atestou o levantamento funcional, cuja classificação indicou um pavimento em boas condições de serventia. No que diz respeito ao desempenho hidráulico, o pavimento apresentou um desempenho adequado em termos de capacidade de infiltração. Apesar da perda progressiva estimada em 20% ao ano, as taxas de infiltração in situ mantiveram-se acima de 10-3 m/s em todos os ensaios realizados, sendo, portanto, superior à maioria dos revestimentos permeáveis tradicionalmente utilizados como os blocos intertravados e a camada porosa de atrito, conforme descritos pela literatura. / Pervious pavements have become increasingly fundamental as a compensatory measure to attenuate peak flows and to mitigate the impacts generated by torrential storm water in highly urbanized areas. Among the usual materials applied in permeable surface layers, it is possible to highlight the interlocking concrete blocks (ICB) and the porous asphalt. However, internationally, there are alternative materials that are able to present a higher permeability. In this sense, the use of articulated concrete blocks (ACB) needs to be stressed. Recently adopted in United States of America and South Korea, ACB has presented promising infiltration rates. Unlike the ICB, the ACB was designed to work as an integrated framework due to the presence of articulated joints in one of the block directions, which allows discarding the jointing sand and as result, increases water infiltration. Nevertheless, although the pavement hydraulic performance seems to be successful, there are some doubts about the structural behavior. Thereby, aiming at evaluating the hydraulic and structural performance of an unidirectionally articulated concrete block pavement, a pavement experimental section (20 x 5 meters) was constructed at the University of São Paulo Campus. Two types of different bases were applied, namely recycled concrete aggregate (RCA) and natural aggregate. The structural assessment took into account the maximum deflection measurements, the load transfer efficiency (LTE) and the backcalculated elastic moduli of each layer. In addition, this work also evaluated the structural influence caused by the presence of damaged pavers, since it became a recurring problem. Regarding the hydraulic evaluation, the surface infiltration rate was monitored over twenty months after the pavement construction. Furthermore, functional and laboratorial analyses were carried out in order to check the structure serviceability level. The structural results indicated clearly that the articulated block side had better performance than the non-articulated block side in terms of elastic moduli, maximum deflections measurements and LTE, confirming the interlocking efficiency generated by the block shape, comparable to that one provided by the jointing sand in ICB. As the recycled aggregate was characterized by a more well graded particle size distribution than the natural aggregate, the RCA base also presented better structural responses. The presence of damaged blocks did not compromise the pavement structural performance, since the degree of severity was low, as verified by the functional evaluation, which showed a pavement in good conditions. Finally, concerning the hydraulic results, the pavement presented a high infiltration capacity. Even though an infiltration loss of about 20% per year has been detected, the infiltration rate remained greater than 10-3 m/s for all tests performed, being considerably higher than those found in pavements built with both interlocking concrete blocks and with porous asphalt, as reported in the literature.
|
Page generated in 0.057 seconds