Partial-infiltration permeable pavement (PP) systems provide environmental benefits by increasing infiltration, attenuating storm flows and improving stormwater quality. This thesis focuses on the performance and operation of partial-infiltration PP systems over low permeability soil in Ontario. Three PP, AquaPave®, Eco-Optiloc® and Hydromedia® Pervious Concrete were monitored over two years and their performance was evaluated relative to an impermeable Asphalt control. Field data was collected from the Kortright PP pilot parking lot in Vaughan, Ontario. Through the use of restrictor valves on underdrains the PP systems were shown to provide substantial hydrologic benefits by eliminating stormwater outflow for rain events less than 7mm, reducing peak flows by 91% and reducing total stormwater volume by 43%. Stormwater quality was analyzed for winter and non-winter seasons. The PP were shown to greatly reduce the concentration and total loading of suspended solids, nutrients, hydrocarbons and most heavy metals. Some water quality data, such as pH, K, or Sr levels, indicate that the quality of PP effluent will change as the system ages. Study of PP sample boxes at the University of Guelph highlighted the role that construction materials have on effluent quality and showed that pollutants introduced by the pavement and aggregate are almost entirely in a dissolved form and decline very rapidly after a season of exposure to rainfall. Benefits to water quality were sustained during winter months. The partial-infiltration PP systems were shown to provide buffering of Na and Cl concentrations. Small and large-scale maintenance practices for PP systems were investigated. Small-sized equipment testing found that vacuum cleaning and pressure-washing have good potential to improve infiltration capacity. Testing of full-sized streetsweeping trucks demonstrated that permeability can be partially restored on PICP by suction-based sweeping. Vacuum-sweeping was beneficial on a PC pavement which had experienced large permeability losses. Results of this study indicate that partial-infiltration PP systems can be effective measures for maintaining or restoring infiltration functions on parking lots and other low volume traffic areas, even in areas with low permeability soils.

Τα τελευταία χρόνια στις περισσότερες χώρες έχει ολοκληρωθεί η κατασκευή οδικών δικτύων και το ενδιαφέρον των φορέων οδοποιίας έχει στραφεί στη διαχείριση των υφιστάμενων οδικών κατασκευών. Το κυριότερο τμήμα της Διαχείρισης Οδικών Δικτύων καταλαμβάνει η Διαχείριση Οδοστρωμάτων. Τα Συστήματα Διαχείρισης Οδοστρωμάτων έχουν ως στόχο την οικονομική διαχείριση των οδοστρωμάτων και χρησιμοποιούν τεχνητή νοημοσύνη για να καταλήξουν στη βέλτιστη και οικονομικά αποδοτικότερη κατανομή των διαθέσιμων πόρων. Το ευφυές σύστημα που διαθέτουν καταφέρνει να εντοπίζει τη βέλτιστη λύση που ελαχιστοποιεί το κόστος συντήρησης αλλά δεν λαμβάνουν υπόψη τους το αντίκτυπο της επιδείνωσης της κατάστασης του οδοστρώματος στο χρήστη και στο περιβάλλον. Στην παρούσα εργασία χρησιμοποιείται ένας γενετικός αλγόριθμος και αναζητείται η βέλτιστη λύση που ελαχιστοποιεί το γενικευμένο κόστος, το οποίο περιλαμβάνει το κόστος συντήρησης, το κόστος του χρήστη εξαιτίας της κατάστασης του οδοστρώματος και το περιβαλλοντικό κόστος. Τα δεδομένα του προβλήματος αφορούν την κατάσταση των τμημάτων που πρόκειται να συντηρηθούν, το είδος της οδού στο οποίο ανήκουν τα τμήματα οδοστρώματος, τα στοιχεία φθορών κάθε τμήματος, τα διαθέσιμα είδη συντήρησης, το ύψος της χρηματοδότησης και τα κυκλοφοριακά χαρακτηριστικά της περιοχής στην οποία βρίσκονται τα υπό συντήρηση τμήματα. Ο αλγόριθμος κατασκευάζει γονίδια επιλέγοντας είδος συντήρησης για κάθε τμήμα και για κάθε χρόνο συμπεριλαμβανομένης και της επιλογής να μην γίνει καμία συντήρηση σε κάποιο χρόνο. Τα γονίδια ελέγχονται με βάση περιορισμούς που έχουν τεθεί από τα μοντέλα φθορών κάθε τμήματος και επιλέγονται να μεταφερθούν στην επόμενη γενιά αυτά που συνδυάζουν το ελάχιστο κόστος και το μέγιστο επίπεδο λειτουργικότητας στο οδόστρωμα. Η διαφορά του μοντέλου σε σχέση με τα κοινά συστήματα διαχείρισης οδοστρωμάτων έγκειται περισσότερο στις υπολογιστικές απαιτήσεις του συστήματος καθώς η εφαρμογή γενετικού αλγορίθμου οδηγεί γρηγορότερα σε λύση από ότι οι κλασικές μέθοδοι βελτιστοποίησης όπως π.χ. ο γραμμικός προγραμματισμός. Η καταλληλότητα και η ευκολία προσαρμογής των γενετικών αλγορίθμων σε προβλήματα διαχείρισης οδοστρωμάτων επαληθεύεται στην παρούσα εργασία. Το σύστημα καταφέρνει να εντοπίζει το βέλτιστο χρόνο με την οικονομικότερη συντήρηση του κάθε τμήματος του οδικού δικτύου και την πιο φιλική λύση για το χρήστη της οδού και το περιβάλλον. / In recent years the focus of the transportation authorities, researchers and practitioners is being shifted from the construction of new roads to the management of existing road structures and especially to road pavements. Pavement Management Systems are widely used and are continuously being improved because they can lead to considerable fund savings and/or to higher levels of service of road pavements. In this work, a model for pavement maintenance and rehabilitation planning and optimal resource allocation is presented. The objective function aims at minimizing a generalized cost parameter which includes a number of monetary cost components and no monetary impacts. In particular, the objective function consists of the following components: (1) agency cost (the cost of applying the selected maintenance and rehabilitation strategy), (2) user costs (they include vehicle operating cost for fuel consumption, vehicle maintenance and depreciation, traffic delay cost, accident cost, discomfort cost, and delay cost due to maintenance works and (3) environmental impact costs due to traffic pollution and noise. The above cost components are considered with regard to the existing pavement condition levels which are represented by the PSI index. Pavement condition deterioration is assessed through deterministic models that have been developed earlier by our team based on expert opinions and fuzzy systems considering pavement related and traffic parameters, i.e., pavement age, pavement strength, pavement construction quality and traffic loads. The maintenance and rehabilitation treatments are considered with regard to their cost and effectiveness characteristics. Besides the pavement condition deterioration functions, other constraints of the model include budgetary availability (total and individually for different highway groups), threshold values for the minimum accepted pavement condition levels (by highway class), desirable pavement condition levels (by highway class), maintenance and rehabilitation treatment applicability and effectiveness, etc. Due to the size and complexity of the problem (non linear functions), a genetic algorithm has been used as an optimization tool. The algorithm forms solutions by considering applicable maintenance treatments at each pavement section and year within the analysis period. Each solution is checked against all constraints to ensure the feasibility of the solution. No feasible solutions are discarded and new solutions are generated until the required offspring solutions are obtained. The optimization runs over several road sections with different traffic and pavement condition characteristics and within a time span of 10 years. The budgetary or the minimum accepted pavement condition constraints can be altered in order to get a Pareto-front set of optimal solutions for a particular application. Preliminary evaluation indicates that the model provides reasonable results in terms of the appropriate selection of maintenance and rehabilitation treatments and the time of application.

O emprego de pavimentos permeáveis tem se tornado cada vez mais necessário como medida compensatória para amortecer as vazões de pico e atenuar os impactos gerados pelas chuvas torrenciais em áreas altamente urbanizadas. Dentre os materiais convencionalmente adotados como revestimento permeável no contexto nacional destacam-se os blocos de concreto intertravados (BCI) e o asfalto poroso. No entanto, internacionalmente, existem materiais alternativos que podem apresentar permeabilidade igual ou até mesmo superior. Sob esse prisma, convém destacar o uso dos blocos de concreto articulados (BCA), recentemente adotados nos Estados Unidos e na Coréia do Sul, cuja capacidade de infiltração vem mostrando-se bastante promissora. Diferentemente dos blocos intertravados, os BCA foram projetados para trabalhar em conjunto, já que são interconectados por meio do encaixe das articulações unidirecionais de cada peça, sobrepostas umas às outras, dispensando assim o uso de material de rejunte, o que por sua vez aumenta a permeabilidade do revestimento. Contudo, embora o desempenho hidráulico aparente ser eficaz, questiona-se se o pavimento de blocos de concreto articulados (PBCA) comporta-se de forma igualmente satisfatória em termos estruturais. Nesse sentido, visando avaliar o desempenho estrutural e hidráulico de um pavimento permeável de BCA, foi construída uma pista experimental (20 x 5 m) no Campus da USP, adotando-se dois tipos de base, uma de agregado reciclado (RCD) e outra de agregado natural (brita 1). Na análise estrutural utilizaram-se como parâmetros de avaliação as deflexões máximas obtidas via FWD (Falling Weight Deflectometer), a eficiência de transferência de carga (LTE - Load Transfer Efficiency) e por fim, os módulos de resiliência retroanalisados para cada camada. Ademais, a pesquisa ainda avaliou a influência da presença de fissuras ou trincas nos blocos no desempenho estrutural do pavimento, já que acabaram tornando-se recorrentes em ambas as seções avaliadas. Já na avaliação hidráulica, monitorou-se a taxa de infiltração in situ ao longo de quase vinte meses. Complementarmente, foram realizadas ainda avaliações laboratoriais dos materiais empregados e funcionais do pavimento. A análise estrutural indicou que o sentido articulado do BCA obteve respostas estruturais nitidamente melhores que o sentido não articulado em termos de módulo de resiliência, deflexões máximas e LTE, evidenciando que de fato as articulações conferem intertravamento ao pavimento, próximo ao propiciado pela areia de rejunte no BCI. A base de RCD por apresentar uma distribuição granulométrica mais bem distribuída do que a brita 1, também obteve melhores resultados. Já a presença de trincas ou fissuras nos blocos não acarretou comprometimento no desempenho estrutural da pista experimental, devido ao baixo grau de severidade da maioria das patologias encontradas, como atestou o levantamento funcional, cuja classificação indicou um pavimento em boas condições de serventia. No que diz respeito ao desempenho hidráulico, o pavimento apresentou um desempenho adequado em termos de capacidade de infiltração. Apesar da perda progressiva estimada em 20% ao ano, as taxas de infiltração in situ mantiveram-se acima de 10-3 m/s em todos os ensaios realizados, sendo, portanto, superior à maioria dos revestimentos permeáveis tradicionalmente utilizados como os blocos intertravados e a camada porosa de atrito, conforme descritos pela literatura. / Pervious pavements have become increasingly fundamental as a compensatory measure to attenuate peak flows and to mitigate the impacts generated by torrential storm water in highly urbanized areas. Among the usual materials applied in permeable surface layers, it is possible to highlight the interlocking concrete blocks (ICB) and the porous asphalt. However, internationally, there are alternative materials that are able to present a higher permeability. In this sense, the use of articulated concrete blocks (ACB) needs to be stressed. Recently adopted in United States of America and South Korea, ACB has presented promising infiltration rates. Unlike the ICB, the ACB was designed to work as an integrated framework due to the presence of articulated joints in one of the block directions, which allows discarding the jointing sand and as result, increases water infiltration. Nevertheless, although the pavement hydraulic performance seems to be successful, there are some doubts about the structural behavior. Thereby, aiming at evaluating the hydraulic and structural performance of an unidirectionally articulated concrete block pavement, a pavement experimental section (20 x 5 meters) was constructed at the University of São Paulo Campus. Two types of different bases were applied, namely recycled concrete aggregate (RCA) and natural aggregate. The structural assessment took into account the maximum deflection measurements, the load transfer efficiency (LTE) and the backcalculated elastic moduli of each layer. In addition, this work also evaluated the structural influence caused by the presence of damaged pavers, since it became a recurring problem. Regarding the hydraulic evaluation, the surface infiltration rate was monitored over twenty months after the pavement construction. Furthermore, functional and laboratorial analyses were carried out in order to check the structure serviceability level. The structural results indicated clearly that the articulated block side had better performance than the non-articulated block side in terms of elastic moduli, maximum deflections measurements and LTE, confirming the interlocking efficiency generated by the block shape, comparable to that one provided by the jointing sand in ICB. As the recycled aggregate was characterized by a more well graded particle size distribution than the natural aggregate, the RCA base also presented better structural responses. The presence of damaged blocks did not compromise the pavement structural performance, since the degree of severity was low, as verified by the functional evaluation, which showed a pavement in good conditions. Finally, concerning the hydraulic results, the pavement presented a high infiltration capacity. Even though an infiltration loss of about 20% per year has been detected, the infiltration rate remained greater than 10-3 m/s for all tests performed, being considerably higher than those found in pavements built with both interlocking concrete blocks and with porous asphalt, as reported in the literature.

Made available in DSpace on 2015-03-26T13:28:23Z (GMT). No. of bitstreams: 1 texto completo.pdf: 2878305 bytes, checksum: ea815ad1b28743410827b92fe91b37d1 (MD5) Previous issue date: 2006-02-22 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / This work evaluated the asphalt pavements of the Federal University of Viçosa (UFV), where functional and structural data were collected based on the rules of the Departamento Nacional de Infra-estrutura de Transportes (DNIT). The pavements of the campus were divided in homogeneous subparts. In function of technical characteristics of the pavements, some methodologies proposed by the DNIT had little changes because the DNIT s rules used in this work were developed for using in pavements with technical standard, which were different of urban pavements. The functional analyses followed the roles of DNIT 006/2003 PRO e DNIT 009/2003 PRO, for the objectives and subjective superficial evaluations, respectively. In the deflectometer measurements, the methodology proposed by DNER ME 024/94 was used, which is referent to the determinations of the pavement s deflection through the Benkelman beam. More than 80% of the subparts objectively evaluated received scores between terrible and bad . However, in the subjective evaluation, the subparts received scores between good and regular . In the subparts studied on the deflectometer evaluation, according to the roles of the structural evaluation of the DNIT, was observed the necessity of complementary studies, to obtain more data on such pavements and subsequently develop projects aiming the improvement of structural conditions of these pavements. This work consists of the preliminary study of structural conditions survey of the asphalted pavements of the UFV. The analyses and interpretation of the data related to the structural and superficial conditions of these pavements will be used to the supervision and planning of works to improve them. / Este trabalho consta de uma investigação sobre as vias asfaltadas do Campus da Universidade Federal de Viçosa (UFV), onde foram coletados dados funcionais e deflectométricos, baseando-se nas normas do Departamento Nacional de Infra-estrutura de Transportes (DNIT). Para tal, o sistema viário do Campus da UFV foi dividido em subtrechos homogêneos, e devido às características urbanas de suas ruas, algumas metodologias propostas pelo DNIT sofreram pequenas adaptações, pois as normas do DNIT empregadas no trabalho foram desenvolvidas para serem utilizadas em rodovias de padrão técnico diferente de vias urbanas. Para as análises funcionais foram seguidas às normas DNIT 006/2003 PRO e DNIT 009/2003 PRO, para a realização de avaliações superficiais objetivas e subjetivas, respectivamente. Nos trabalhos de medições deflectométricas, utilizou-se a metodologia proposta na norma DNER ME 024/94, que se refere à determinação das deflexões no pavimento através da viga Benkelman. Observou-se, nesta pesquisa, que mais de 80% dos subtrechos avaliados objetivamente receberam conceitos entre péssimo e ruim . Já por uma avaliação subjetiva, os subtrechos analisados ficaram com conceitos entre bom e regular . Quanto aos subtrechos analisados deflectométricamente, verificou-se, segundo as normas de avaliação estrutural do DNIT, a necessidade de estudos complementares, a fim de se obter mais dados sobre tais pavimentos, para que dessa forma sejam feitos projetos de reforço baseados nos critérios de resistência. Esse trabalho é uma fase preliminar de um conhecimento mais abrangente das condições estruturais do sistema viário desta universidade. A análise e interpretação de informações atualizadas, relativas às condições superficiais e estruturais destas vias servirão de suporte ao planejamento de obras de restauração.

Apresenta-se um trabalho numérico e experimental, com o objetivo de estudar o comportamento dos pavimentos de concreto estruturalmente armados, quando submetidos a forças verticais estáticas e repetidas. Avalia-se a contribuição da armadura de flexão, na resistência de placas de concreto apoiadas sobre meio elástico. Verifica-se experimentalmente o modo de ruína de placas submetidas a carregamento monotônico e a carregamento repetido, com e sem armadura, e acompanha-se o desenvolvimento das fissuras no concreto e das deformações no aço. Comparam-se os resultados obtidos, com as recomendações da NBR 6118:2003, para o dimensionamento de estruturas submetidas à fadiga. É desenvolvido modelo numérico capaz de representar a interface do solo com a placa do pavimento, a fissuração do concreto, a contribuição da armadura e o comportamento pós-fissuração. Com auxílio do modelo numérico, validado a partir dos resultados experimentais, estuda-se a influência de alguns parâmetros importantes para o dimensionamento dos pavimentos, tais como: capacidade de suporte da fundação, espessura das placas, área de aço, dimensões das placas em planta, posição de aplicação da força e presença de juntas de transferência de deslocamento. Os resultados experimentais mostram uma significativa contribuição da armadura positiva na resistência de placas isoladas sob forças verticais centradas. Verificou-se que as forças repetidas provocam fadiga do aço e que o número de ciclos depende da deformação provocada na armadura. A partir dos resultados são traçadas diretrizes para o dimensionamento, no qual devem ser considerados os momentos positivos e os negativos, e deve ser feita a verificação da fadiga do concreto e da armadura / A numerical and experimental study on the behavior of structurally reinforced concrete pavement under vertical static and repeated load is presented. The contribution of bending reinforcement to the strength of concrete slab is assessed. It is experimentally verified the fracture of reinforced and plain concrete slabs under monotonic loads and under cyclic loads. The concrete cracking and the strain on steel are monitored. The results are compared to the brazilian code recommendations to the design of structures under fatigue. A numerical model that represents the soil-slab interface, the concrete cracking, the reinforcement contribution and the tension stiffening behavior is developed. Some important parameters to the pavement design are analyzed using this finite element model, whose reliability was verified to experimental results. These parameters are: the soil capacity; the slab thickness; reinforcement ratio; slab dimensions; load positions; and joints conditions. The tests data show an important contribution of the positive reinforcement on the strength of an isolated slab with centered load. It has been verified the fatigue of the steel. The number of cycles depends on the reinforcement strain. The results are used to propose some directions to the design. The positive and negative bending moments have to be considered and the fatigue on the concrete and on the reinforcement has to be verified

In Brazil, the investment in infrastructure of transports has increased for both maintenance and foundation of highways. Although, the traffic growth rates, in volume and weight, in addition to the weather conditions, has produce dearly degradation of the pavements. In this context, the numeric analysis of pavement structures became more and more relevant to predict the behavior of the pavements. This work evaluates numerically the stress and strain in pavements, according the traffic loading, using Finite Element Method. Thereby, the estimation of that effect in the life cycle of the wearing course is done. Several numerical analyses are fulfilled considering changes in the physical features of pavement layers. The adopted values for the layers features are acquired from the literature considering the interval of values obtained from each material in use. Each analysis includes the calculation of the deflection and the strain, respectively, in the top and in the base of wearing course. The estimation of the necessary number of cycles for the fatigue in the wearing course is done by three models from the literature. The analysis indicates the subbase course as relevant to reduce the stress in the top of subgrade, while the base and wearing course influence more significantly in the deflections in the top of pavement and the fatigue in wearing course. / No Brasil, o aumento nos investimentos em infraestrutura de transportes contempla tanto a manutenção quanto a implantação de novas rodovias. Contudo, o aumento do tráfego, em volume e peso, associado às condições de intempéries, tem resultado na degradação precoce do pavimento. Nesse contexto, a análise numérica da estrutura do pavimento torna-se cada vez mais relevante para prever o comportamento dos pavimentos. Este trabalho tem o objetivo de estudar numericamente as tensões e deformações em estruturas de pavimentos, submetidas a cargas de tráfego, através do Método dos Elementos Finitos, e avaliar seus efeitos sobre a vida útil da camada de revestimento. Diversas análises numéricas serão realizadas modificando as características físicas das camadas do pavimento. Os valores adotados para as características das camadas são obtidos através de pesquisa bibliográfica da faixa de valores encontrada para cada material utilizado. A cada análise é avaliado o valor da deflexão e da deformação, respectivamente, no topo e na base do revestimento. O número de ciclos necessários para a fadiga do revestimento é calculado através de três modelos disponíveis na literatura. As análises indicam que a camada de sub-base é relevante para reduzir as tensões no topo do subleito, enquanto que a base e o revestimento influenciam mais significativamente na deflexão no topo do pavimento e na fadiga do revestimento.

A infraestrutura de transportes traz benefícios sociais e econômicos, porém traz também inevitáveis impactos ambientais que não podem ser negligenciados, como supressão da vegetação local e poluição atmosférica. Esses impactos ambientais podem ser quantificados e analisados pela técnica Avaliação do Ciclo de Vida (ACV), que cria a possibilidade de contemplar o aspecto ambiental na tomada de decisões e pode trazer melhor compreensão da cadeia produtiva. Na última década, é crescente a utilização dessa técnica na área de pavimentação, entretanto ainda é pouco usual no Brasil. O objetivo dessa dissertação é avaliar os impactos ambientais produzidos por duas técnicas de restauração de pavimentos asfálticos, comparando-se os resultados de ACV que observaram as fases de produção de materiais e de transportes. Dois cenários de restauração foram estudados, o primeiro considerou uma mistura asfáltica composta exclusivamente por materiais virgens (restauração convencional), e o segundo, considerou uma mistura asfáltica composta por 35% de Reciclado de Pavimento Asfáltico (RPA). As ACV foram procedidas de três maneiras distintas: (a) com o banco de dados e software alemão GaBi e o método EDIP 1997, (b) com o banco de dados da USLCI e pelo método do EDIP 1997, e (c) com software PavementLCA e o método TRACI. Os resultados obtidos a partir dos três diferentes procedimentos indicaram que a restauração com RPA apresentou redução dos impactos ambientais potencias quando comparada com a restauração convencional. Observou-se também que, para a maioria das análises, a atividade que mais contribuiu para os impactos das duas estratégias de restauração foi a de produção dos materiais. A análise de sensibilidade dos resultados obtidos com o GaBi e com o USLCI mostrou diferenças consideráveis, causadas pelas diferentes fontes de dados. Apesar de ser uma técnica em crescimento, a ACV ainda apresenta limitações quando aplicada a pavimentos, sobretudo, pela complexidade de seu ciclo de vida e pelas incertezas que envolvem sua elaboração, assim, estudos sobre ACV devem continuar, a fim de padronizar a técnica para a área e, com o tempo, obter resultados cada vez mais precisos. / Transportation infrastructure brings social and economic benefits, but it also brings unavoidable environmental impacts that can not be neglected, such as suppression of local vegetation and air pollution. These environmental impacts can be quantified and analyzed by the Life Cycle Assessment (LCA) technique, which creates the possibility of contemplating the environmental aspect in decision making and can provide a better understanding of the production chain. In the last decade, the use of this technique in the area of pavement is increasing, although not very usual in Brazil. The goal of this thesis is to analyze the environmental impacts produced by two asphalt pavement rehabilitation techniques, comparing the LCA results of material production and transportation phases. Two rehabilitation scenarios were studied, the first one considering an asphalt mixture composed exclusively by raw materials (conventional rehabilitation), and the second one considered an asphalt mixture composed by 35% of Reclaimed Asphalt Pavement (RAP). The LCA was done in three different ways: (a) with the German database and software GaBi and the EDIP 1997 method, (b) with the USLCI database and the EDIP 1997 method, and (c) with PavementLCA software and the TRACI method. The results obtained from the three different procedures indicated that the rehabilitation with RPA showed reduction of the potential environmental impacts when compared with the conventional rehabilitation. It was also observed that for the majority of the analysis, the activity that contributed the most to the impacts of the two rehabilitation strategies was the material production one. The sensitivity analysis of the results obtained with GaBi and with USLCI showed considerable differences in their values, caused by the different data sources. Although it is a growing technique, LCA still presents limitations when applied to pavements, mainly due to the complexity of its life cycle and the uncertainties involved in its elaboration, so studies about LCA should continue with the aim of standardizing the technique for the area and, over time, achieve increasingly more accurate results.

Muito embora a micro e a macrotextura dos pavimentos sejam importantes para o tráfego seguro, principalmente em condição de pista molhada e com velocidades superiores a 50 km/h, nos locais de acidentes de trânsito no Brasil esses parâmetros não são avaliados quando das perícias técnicas. Assim, o objetivo principal desta tese é estabelecer critérios de avaliação de pavimentos asfálticos que possam integrar um protocolo para a perícia técnica em locais de acidentes de trânsito. Foi baseada em coleta de dados de micro e de macrotextura dos revestimentos asfálticos em três rodovias no Estado do Paraná, num total de 106 locais, e em quatro vias urbanas na cidade de Londrina-PR, num total de 148 locais, todas com velocidades permitidas iguais ou superiores a 50 km/h, especificamente em trechos onde ocorreram acidentes de trânsito, o que permitiu a determinação da aderência na interface pneu/pavimento, se os valores encontram-se dentro das faixas de aceitabilidade do DNIT, da ANTT e da ARTESP e se houve efetiva contribuição do pavimento para a ocorrência e para a severidade dos acidentes. Dos 106 acidentes rodoviários analisados, em 19 deles as alturas médias de mancha de areia, parâmetro empregado para avaliar a macrotextura, apresentaram-se com valor inferior ao mínimo recomendado (0,60 mm), enquanto que dos 148 acidentes ocorridos em vias urbanas, 22 ocorreram em trechos com alturas médias de mancha de areia também inferiores ao valor mínimo recomendado. Nesses casos também foram realizados ensaios de microtextura, com uso do pêndulo britânico, e posteriormente foram calculados os valores do Índice de Atrito Pneu-Pavimento Internacional (International Friction Index, IFI). Os resultados e as análises deste trabalho indicam que uma melhor condição de macrotextura pode reduzir entre 6% e 19% as energias cinéticas envolvidas nos acidentes em rodovias e de 3% a 11% em vias urbanas, com real possibilidade de redução tanto das avarias produzidas nos veículos quanto, principalmente, das lesões nas vítimas. Dada a importância da micro e da macrotextura, recomenda-se que o protocolo de avaliação de pavimentos para perícias técnicas em locais de acidentes de trânsito em rodovias e em vias urbanas estabeleça a realização dos ensaios de Pêndulo Britânico e de Mancha de Areia em até 24 horas após o evento e que a área a ser levantada contemple toda a extensão das marcas de frenagem dos veículos envolvidos ou, no caso de inexistência de marcas, que compreenda uma extensão de 10 a 70 metros, respectivamente para vias com velocidade máxima permitida de 40 km/h e de 120 km/h. Espera-se, complementarmente, que um protocolo com critérios simples e objetivos, como o desenvolvido neste trabalho, permita a adoção de políticas públicas preventivas, de maior alcance e periodicidade, com as avaliações não somente nos trechos onde ocorrem acidentes, mas ao longo das vias. / Although the micro and macro textures of pavements are important factors for safe driving, especially on wet tracks and with speeds above 50 km/h, such parameters are not even evaluated during technical inspections in traffic accident sites in Brazil. Thus, the main purpose of this thesis is to establish criteria for the evaluation of asphalt pavements that may become integral part of a protocol for technical inspection in traffic accident sites. This work is based on the collection of data concerning the micro and macro texture of asphalt pavements on three roads in the State of Paraná, totaling 106 locations, and on four urban streets in the city of Londrina, State of Paraná, totaling 148 locations. All such locations have a speed limit of equal to or higher than 50 km/h, especially on the sites where traffic accidents occurred, which allowed for the determination of the tire/pavement adherence, and whether the values found were in accordance with the acceptable levels established by DNIT, ANTT and ARTESP, and whether there was effective contribution on the part of the pavement for the occurrence as well as the severity of the accidents. Out of the 106 road accidents that were analyzed, it was observed that in 19 of them the average heights of the sand spot, a parameter used to evaluate the macro-texture, were lower than the minimum value recommended (0,60 mm), while out of the 148 accidents taken place in urban streets, 22 took place in areas where the average heights of the sand spot were also lower than the recommended minimum value. In the case of the accidents that occurred in places where the heights of the sand spots were lower than the minimum recommended, micro texture essays were also carried out by use of the British Pendulum Tester, and later the values of the International Friction Index (IFI) were calculated. The results and the analyzes of this work indicated that a better condition in the macro texture would reduce the kinetic energies involved in road accidents between 6% and 19%, and from 3% to 11% on urban streets, with the real possibility of minimizing both damages caused to the vehicles and especially the lesions on the victims. Given the importance of micro and macro textures, it is recommended that the protocol for the evaluation of pavements for the purpose of technical inspection in traffic accident sites both on roads and urban streets require the carrying out of the British Pendulum Tester and the Sand Spot within 24 hours of the time of the accident and that the area to be tested should include the entire extension of the braking skid marks of the vehicles involved in the accident, or, in the case of inexistence of such marks, covering 10 to 70 meters, respectively, for locations where the permitted maximum speed is 40 km/h, and for locations where the permitted maximum speed is 120 km/h. It is additionally expected that a protocol having simple yet objective criteria, such as the ones developed in this work, will allow for the adoption of preventive public policies, having greater scope and periodical applications, not only on sites where accidents take place, but also on the entirety of roads and streets.

No description available.

The effects of frost action introduce many challenges in the design and construction of roadways in cold regions throughout the United States. The penetration of frost into pavement structures can lead to differential frost heave during winter and thaw weakening during spring. Both of these damage mechanisms lead to premature pavement distress, structural deterioration, and poor ride quality. Because the availability of naturally occurring non-frost-susceptible pavement base materials is rapidly diminishing in many areas while project budgets remain largely inadequate, pavement engineers are utilizing alternative materials and techniques to minimize such damage. The purpose of this research was to investigate and document the state of the practice concerning the design and construction of pavements in cold regions. In particular, the various methods and standards employed for characterizing materials, improving soils and aggregates, and determining pavement layer thicknesses were explored. A comprehensive literature review was performed, and a questionnaire survey was conducted of various state DOTs throughout the United States that are involved with the design and maintenance of roadways. The study was directed primarily at identifying practices utilized by state DOTs in climates with freezing temperatures. The information obtained in this research represents a unique compilation of standards of practice that have been developed by DOTs based on years of experience and research in their respective jurisdictions. While this research allows engineers at state DOTs to compare their pavement design and construction practices with those of other states represented in the survey, consulting engineers and engineers in local governments involved in characterizing materials, improving soils and aggregates, and determining pavement layer thicknesses can also benefit from this work.