The presented diploma thesis deals with the extraction and storage stability of lipophilic pigments produced by selected strains of yeasts and algae. In this thesis, there was studied the influence of the selected solvents on the efficiency of extraction, as well as the effect of ambient temperature on the stability of the pigments during storage. The work is divided into two main parts, theoretical and practical part. In the theoretical part knowledge about algae, yeasts and their cultivation parameters is summarized. Furthermore, some information regarding the selected lipid metabolites, their properties and possibilities of application in various branches of industry is mentioned. The practical part deals with the preparation of extracts and stability tests. Extracts were prepared from selected biomass samples in solvents suitable for applications in food industry or cosmetics (ethanol and hexane). Subsequently, the long-term stability tests lasting 4 months and short-term stability tests lasting a total of 28 days were performed on these extracts. The pigments were determined by HPLC and spectrophotometrically, the fatty acid content was determined by GC. For the extraction of pigments from biomass, in the most cases ethanol appears to be the optimal solvent. However, for lipid extraction from biomass, hexane appears to be the optimal solvent for a significant number of samples. In most samples, storage in the freezer showed the most favourable effect on pigment stability, but some samples showed comparable stability even when stored in the refrigerator.

This work deals with design and realization od an application for Pocket PC which displays wireless networks on a map. The goal of this project is to display signal coverage of an area together with a base station. This paper also deals with GSM localization. The main part describes station position calculation, concept and implementation of the application. In the end there are suggestions for future development of the application.

This thesis deals with creating client - server application. Client part of the application is created with a help of the Compact .NET framework and it is running on the mobile facility (PDA). Server part is written on .NET framework and it is running on the desktop computer. In the first part I characterize PDA facility, it's using and also I discuss communication between SQL Servers and PDA facilities. Next part describes .NET platform and advantages, which this platform provides. Also I tried to show differences between client - server architectures, because of understanding in my working. The last part of this work deals with implementation of the client - server application.

It is predicted that the market for position-based services is going to reach an annual turnover of billions of dollars in a few years. Besides this, also the game industry is estimated to meet a bright future, and there is a great interest already. This master’s thesis looks at a service that combines these two areas. The result is a position-based game called Mystery that is developed for the handheld computer Compaq iPaq 36-serie, which is well suited for this kind of game. To be able to locate a player we have used Ericsson’s Mobile Positioning System, MPS, which uses GSM positioning. The alternative would have been to use the Global Positioning System, GPS, but then the handheld computer would require extra hardware that is not available on the market yet. The prototype consists of a client and a server application. They are both developed in Java and they are communicating with each other through an http- protocol. One conclusion we have drawn form our work is that the kind of game we have developed requires higher accuracy than is achieved with GSM today, even though it is still possible to play the game. The disadvantage now is that the players have to move long distances, which is most likely if they are going by train, bus etc. A better accuracy would make it possible to shrink the distances so that it would also be remunerative to walk. When a better accuracy can be achieved a new possibility for this kind of game will open up. / <p>Validerat; 20101217 (root)</p>

No description available.

No description available.

In this study, an in-depth analysis of usage data covering one year of patron-driven acquisition on the ebook platform Ebook Library (EBL) is presented. A special focus lies on the evaluation of use and re-use of short term loans. As a result, relevant licensing parameters can be adjusted according to existing usage patterns and a more efficient operation of PDA can be achieved

Yes / In the last 10 years the University of Bradford Library Acquisitions Department has shrunk from 13 members of staff to 5. This has led to us embracing new technology to help streamline workflows within the department. As well as utilising EDI functionality, changing processing workflows and using shelf-ready books, we have devised innovative ways of dealing with everyday tasks. Topics included cover: PDA deduplication; spine labelling on a large scale; the weeding of discarded books; using saved global updates on incoming MARC records and using load profiles innovatively.

Par le passé, la collaboration entre le Centre d'Imagerie Médicale de Sherbrooke (CIMS) et le Groupe de Recherche en Appareillage Médicale de Sherbrooke (GRAMS) a permis de développer le scanner LabPET. Celui-ci fut le premier scanner de Tomographie d'Émission par Positrons (TEP) commercial utilisant des photodiodes à effet avalanche (PDA) comme détecteur. Depuis, cette collaboration a permis de faire évoluer le scanner afin d'améliorer cette modalité d'imagerie et d'y ajouter la tomodensitométrie (TDM). Les attentes pour la prochaine génération du scanner sont donc grandes. Cette nouvelle génération du scanner, le LabPET II, verra les deux modalités nativement intégrées et elles utiliseront la même chaine de détection. Ce scanner se verra doté de nouveaux détecteurs organisés en matrices de 64 cristaux de 1,1 par 1,1 mm². Cette nouvelle matrice, associée à ses deux matrices de 32 PDA, a prouvé sa capacité à fournir une résolution spatiale inférieure au millimètre. L'utilisation de ce nouveau module de détection pourra donc permettre au LabPET II d'être le premier scanner bimodal (TEP/TDM) commercial atteignant une résolution submillimétrique. Ce scanner permettra de s'approcher un peu plus de la résolution spatiale ultime en TEP tout en permettant une bonne localisation anatomique grâce à l'ajout d'une imagerie TDM rudimentaire. Pour atteindre ces objectifs, une intégration complète de l'électronique frontale a été nécessaire. Dans les versions précédentes, seuls les préamplificateurs de charge et les filtres de mise en forme étaient intégrés; dans cette nouvelle version, toute l'électronique analogique ainsi que la numérisation et les liens de communications devront être intégrés. Pour ce faire, la technique de temps de survol au-dessus d'un seuil (ou ToT pour «Time-over-Threshold») a été préférée à la solution utilisée par le LabPET I qui nécessitait un convertisseur analogique-numérique par canal. La contrepartie de cette solution est l'obligation de maintenir la tension de base à une valeur fixe et commune à tous les canaux. Le circuit de polarisation des PDA a aussi dû être intégré dans l'ASIC, car il occupait énormément de place sur la carte d'électronique frontale du LabPET 1. Dans ce mémoire seront décrits la conception, l'intégration et les tests de ces deux circuits du système. Ils ont démontré leur efficacité tout en n'occupant que très peu de place dans le circuit intégré spécialisé (ASIC) du «module de détection». Au vu des sources bibliographiques recensées, le module de détection du LabPET II devrait être l'un de ceux ayant la plus forte densité de canaux (environ 45 par centimètre carré) et le seul combinant électronique analogique faible bruit, numérique et haute tension (~450 V). La réalisation de cette nouvelle génération devrait permettre au partenariat CIMS/GRAMS de réaffirmer leur position de leader dans le domaine en améliorant les outils d'imagerie à la disposition des chercheurs en médecine préclinique.

The present research is an experimental investigation of the atomization of a superheated pressurized liquid jet that is exposed to the ambient pressure due to a sudden depressurization. This phenomena is called flashing and occurs in several industrial environments. Liquid flashing phenomena holds an interest in many areas of science and engineering. Typical examples one can mention: a) the accidental release of flammable and toxic pressure-liquefied gases in chemical and nuclear industry; the failure of a vessel or pipe in the form of a small hole results in the formation of a two-phase jet containing a mixture of liquid droplets and vapor, b) atomisation improvement in the fuel injector technology, c) flashing mechanism occurrence in expansion devices of refrigerator cycles etc... The interest in flashing events is especially true in the safety field where any unexpected event is undesirable. In case of an accident, flammable or toxic gas clouds are anticipated in close regions of the release because of the sudden phase change . Due to the non-equilibrium nature of the flow in these near field regions, conducting accurate data measurements for droplet size and velocity is a challenging task resulting in scarce data in the very close area. This research has been carried out at the von Karman Institute (VKI) within the 5th framework of European Commission to fulfill the goal of understanding of source processes in flashing liquids in accidental releases. The program is carried out under name of FLIE (Flashing Liquids in Industrial Environments)(Contract no: EVG1-CT-2000-00025). The specific issues that are presented in this thesis study are the following:a) a comprehensive state of art of the jet break up patterns, spray characteristics and studies related to flashing phenomena; b)flashing jet breakup patterns and accurate characterization of the atomized jet such as droplet diameter size, velocity and temperature evolution through carefully designed laboratory-scale experiments; c) the influence of the initial storage conditions on the final atomized jet; d) a physical model on the droplet transformation and rapid evaporation in aerosol jets. In order to characterize the atomization of the superheated liquid jet, laser-based optical techniques like Particle Image Velocimetry (PIV), Phase Doppler Anemometry (PDA) are used to obtain information for particle diameter and velocity evolution at various axial and radial distances. Moreover, a high-speed video photography presents the possibility to understand the break-up pattern changes of the simulating liquid namely R-134A jet in function of driving pressure, superheat and discharge nozzle characteristics. Global temperature measurements with an intrusive technique such as thermocouples, non-intrusive measurements with Infrared Thermography are performed. Cases for different initial pressures, temperatures, orifice diameters and length-to-diameter ratios are studied. The break-up patterns, the evolution of the mean droplet size, velocity, RMS, turbulence intensity and temperature along the radial and axial directions are presented in function of initial parameters. Highly populated drop size and velocity count distributions are provided. Among the initial storage conditions, superheat effect is found to be very important in providing small droplets. A 1-D analytical rapid evaporation model is developed in order to explain the strong temperature decrease during the measurements. A sensitivity analysis of this model is provided.