Spelling suggestions: "subject:"petrophysics"" "subject:"astrophysik""
1 |
Geologische Anwendungen und Risiken im Tieferen Untergrund von Sachsen (ARTUS)21 October 2022 (has links)
Die Bände präsentierent eine strukturgeologische Neubewertung des Sächsischen Granulitgebirges, die aus einem multidisziplinären Datensatz abgeleitet wird. Die moderne tektonische Karte erlaubt es, junge tektonische Hebungen und Senkungen von älteren Strukturen zu unterscheiden und die zeitliche Reihenfolge der Aktivität von Störungen abzuleiten.
|
2 |
Bruchstrukturen im Sächsischen Granulitgebirge: Nachweis und Analyse ausgewählter tektonischer Bruchstrukturen im Granulitgebirge und ihre potentielle neotektonische GefährdungMüller, Franz, Kroner, Uwe, Buske, Stefan, Hlousek, Felix 21 October 2022 (has links)
Diese Schriftenreihe präsentiert eine strukturgeologische Neubewertung des Sächsischen Granulitgebirges, die aus einem multidisziplinären Datensatz abgeleitet wird. Die gewonnenen Ergebnisse münden in die Darstellung einer Bruchtektonischen Karte des Granulitgebirges und einen zusammenfassenden Katalog der Bruchstrukturen. Hierbei liegt ein Schwerpunkt des Projektes auf der Identifikation und Charakterisierung junger Störungszonen.
Die Veröffentlichung richtet sich sowohl an geologisch interessierte Laien ohne fachlichen Hintergrund als auch an ein Fachpublikum.
Redaktionsschluss: 31.10.2021
|
3 |
Geomorphologischer Atlas Sachsens: Geomorphologische Analyse tektonischer Einheiten in SachsenDomínguez-Gonzalez, Leomaris, Andreani, Louis, Stanek, Klaus 21 October 2022 (has links)
Diese Schriftenreihe präsentiert eine moderne tektonische Karte Sachsens. Die Ergebnisse dieses Projekts erlauben es, junge tektonische Hebungen und Senkungen von älteren Strukturen zu unterscheiden und die zeitliche Reihenfolge der Aktivität von Störungen abzuleiten. Die Veröffentlichung richtet sich sowohl an geologisch interessierte Laien ohne fachlichen Hintergrund als auch an ein Fachpublikum.
Redaktionsschluss: 15.08.2019
|
4 |
Inherent strength and stiffness anisotropy of laminated rocksIsmael, Mohamed 28 May 2019 (has links)
The variation of rock strength and stiffness, known as mechanical anisotropy, is expected at different scales: large (rock mass) - or small (intact rock) - scales. It is always mandatory for engineering applications built either on or in anisotropic rock masses to investigate the strength and deformation behavior of those masses. To achieve this goal, continuum-based constitutive models are presented to analyze the mechanical anisotropy. One of both implemented models is named ‘Transubi model’ which considers the transverse isotropic elasticity into bi-linear Mohr-Coulomb strain hardening/softening plastic framework. Experimental investigations and numerical simulations focused mainly on the influence of the mechanical anisotropy on the plastic zoning around excavated openings in laminated rocks. Later, the Transubi model was applied to a tunnel excavated in a shaly facies formation of bedded argillaceous Opalinus clay in an URL (FE-tunnel) to obtain the short-term stability insights. Overall, the research outcomes may have a prospective impact regarding the understanding of anisotropy of laminated, bedded and foliated rocks which improves the deformation behaviour predictability using continuum-based numerical modeling tools.
|
5 |
Einfluss des Mikrogefüges auf ausgewählte petrophysikalische Eigenschaften von Tongesteinen und Bentoniten / Influence of the microfabric on selected petrophysical properties of clay-stones and bentonitesKlinkenberg, Martina 26 February 2008 (has links)
No description available.
|
6 |
Mineralogical, Petrophysical and Economical Characterization of the Dimensional Stones of Uruguay; Implications for Deposit Exploration / Mineralogische, Petrophysikalische und ökonomische Charakterisierung der Natursteine Uruguays; Implikationen für die LagerstätteerkundungMorales Demarco, Manuela 05 June 2012 (has links)
No description available.
|
7 |
Brazilian test on anisotropic rocksDinh, Quoc Dan 29 September 2011 (has links) (PDF)
The present work describes investigations on the anisotropic strength behavior of rocks in the splitting tensile test (Brazilian test). Three transversely isotropic rocks (gneiss, slate and sandstone) were studied in the Lab.
A total of more than 550 indirect tensile strength tests were conducted, with emphasis was placed on the investigation of the influence of the spatial position of anisotropic weakness plane to the direction of the load on the fracture strength and fracture or fracture mode. In parallel, analytical solutions were evaluated for stress distribution and developed 3D numerical models to study the stress distribution and the fracture mode at the transversely isotropic disc.
There were new findings on the fracture mode of crack propagation, the influence of the disc thickness, the influence of the applying loading angle and angle of the loading-foliation for transversely isotropic material. / Inhalt der Arbeit sind Untersuchungen zum anisotropen Festigkeitsverhalten von Gesteinen beim Spaltzugversuch (Brazilian Test). Laborativ wurden drei transversalisotrope Gesteine (Granit, Schiefer und Sandstein) untersucht.
Insgesamt wurden mehr als 550 Spaltzugversuche durchgeführt, wobei der Schwerpunkt auf die Untersuchung des Einflusses der räumlichen Lage der Anisotropieebene zur Richtung des Lasteintrages auf die Bruchfestigkeit und das Bruchbild bzw. den Bruchmodus gelegt wurde. Parallel dazu wurden analytische Lösungen zur Spannungsverteilung ausgewertet sowie numerische 3D-Modelle entwickelt, um die Spannungsverteilung sowie den Bruchmodus bei einer transversalisotropen Scheibe zu untersuchen.
Es wurden neue Erkenntnisse zum Bruchmodus, der Rissausbreitung, des Einflusses der Scheibendicke, dem Einfluss des Lasteinleitungswinkel sowie des Winkels Lasteintrag - Anisotropieebene für transversalisotropes Material gewonnen.
|
8 |
Brazilian test on anisotropic rocks: laboratory experiment, numerical simulation and interpretationDinh, Quoc Dan 09 February 2011 (has links)
The present work describes investigations on the anisotropic strength behavior of rocks in the splitting tensile test (Brazilian test). Three transversely isotropic rocks (gneiss, slate and sandstone) were studied in the Lab.
A total of more than 550 indirect tensile strength tests were conducted, with emphasis was placed on the investigation of the influence of the spatial position of anisotropic weakness plane to the direction of the load on the fracture strength and fracture or fracture mode. In parallel, analytical solutions were evaluated for stress distribution and developed 3D numerical models to study the stress distribution and the fracture mode at the transversely isotropic disc.
There were new findings on the fracture mode of crack propagation, the influence of the disc thickness, the influence of the applying loading angle and angle of the loading-foliation for transversely isotropic material.:ACKNOWLEDGMENTS 5
ABSTRACT 7
TABLE OF CONTENTS 9
LIST OF FIGURES 13
LIST OF TABLES 19
I. INTRODUCTION 21
Objective of this work 22
Scope of work 23
Research procedure 23
Significance of the work 24
Layout 24
1 STATE OF THE ART 27
1.1 Review of the Brazilian tensile strength test 27
1.1.1 General overview 27
1.1.2 Development of the Brazilian tensile strength test 29
1.1.3 The Brazilian tensile strength test on anisotropic rocks 31
1.1.4 Summary 32
1.2 Analytical aspects 33
1.2.1 Hypotheses for the conventional Brazilian test 34
1.2.2 Failure criteria 36
1.2.3 Crack initiation and propagation 39
1.2.4 Summary 41
1.3 Numerical considerations 41
1.3.1 Numerical methods 42
1.3.2 Summary 42
1.4 Conclusion 43
2 DIAMETRAL COMPRESSION IN A SOLID DISC – COMPILATION OF ANALYTICAL AND SEMI-ANALYTICAL SOLUTIONS 45
2.1 Introduction 45
2.2 Diametral compressive stress distribution in an isotropic elastic disc 45
2.2.1 Elastic theory of line load 46
2.2.2 2D analytical solutions 47
2.2.3 3D disc under line and diametral compressive distributed loads 55
2.2.4 3D solution under diametral compressive distributed load 56
2.3 Stress and strain in an isotropic solid disc 59
2.4 Stress and strain in anisotropic rocks 61
2.5 Conclusion 65
3 LABORATORY TESTS 69
3.1 Introduction 69
3.2 Laboratory test program 70
3.3 Sample preparation 71
3.4 Ultrasonic measurements 72
3.5 Uniaxial and triaxial compression tests 73
3.5.1 Uniaxial compression test 73
3.5.2 Triaxial compression tests 74
3.6 Brazilian tensile strength tests 76
3.6.1 Test apparatus 76
3.6.2 Laboratory test results 77
3.6.3 Interpretation of the test results 89
3.7 Conclusion 96
4 NUMERICAL SIMULATION OF ISOTROPIC MATERIALS - COMPARISON WITH ANALYTICAL SOLUTIONS 97
4.1 Introduction 97
4.2 Numerical simulation of isotropic materials 97
4.2.1 FLAC3D simulation program 97
4.2.2 Simulation procedure 98
4.2.3 Numerical model setup 98
4.2.4 Influence of mesh type 99
4.2.5 Influence of specimen thickness 100
4.2.6 Influence of Poisson’s ratio 102
4.2.7 Influence of loading angle (2) 106
4.2.8 Comparison of 3D analytical and numerical results 110
4.2.9 Influence of stress concentration at the loading jaws 112
4.3 Comparison with experimental results of Postaer Sandstone (FG.Ss) 112
4.4 Conclusion 114
5 NUMERICAL SIMULATION OF ANISOTROPIC MATERIALS - COMPARISON WITH LABORATORY TESTS 117
5.1 Introduction 117
5.2 General procedure for simulating the Brazilian test using FLAC3D 117
5.2.1 Conceptual model 119
5.2.2 Boundary Conditions 119
5.2.3 Numerical model set-up 120
5.3 Constitutive model 121
5.3.1 Choice of constitutive model 121
5.3.2 Bilinear Strain-Hardening/Softening Ubiquitous-Joint Model [98] 121
5.4 Parameter calibration 124
5.4.1 Material parameters used 124
5.4.2 Contact between disc and loading jaws 126
5.4.3 Post-failure deformation properties 128
5.4.4 Tension cut-off 129
5.5 Numerical simulation results 131
5.5.1 Introduction 131
5.5.2 Stress distribution and failure state 133
5.5.3 Stress state in an isotropic elastic medium with arbitrary orientation planes 136
5.5.4 Plasticity states 139
5.5.5 Damage and fracture process 141
5.5.6 Fracture patterns – Comparison of lab results and numerical simulations 148
5.6 Tensile strength – Comparison of lab results and numerical simulations 149
5.6.1 Tensile strength of Le.Gs Gneiss 150
5.6.2 Tensile strength of My.Sc Slate 155
5.7 Summary and Review 159
5.7.1 Potential failure state deduced from pure elastic considerations 159
5.7.2 Tensile strength distribution 160
5.7.3 Tensile strength – determining the anisotropy factor 161
5.7.4 Tensile strength – different procedures - different results 163
6 CONCLUSION AND RECOMMENDATIONS 165
APPENDICES 171
Appendix 3.1 - Fracture patterns in FG.Ss samples 171
Appendix 3.2 - Fracture patterns in FG.Gs samples 177
Appendix 3.3 - Fracture patterns in Le.Gs samples 183
Appendix 3.4 - Fracture patterns in My.Sc samples 190
Appendix 4.1 - Influence of loading angle 197
Appendix 4.2 - Influence of material properties 203
Appendix 5.1 - Failure zone state in Le.Gs Gneiss 209
Appendix 5.2: Failure zone state in My.Sc Slate 216
REFERENCES 223 / Inhalt der Arbeit sind Untersuchungen zum anisotropen Festigkeitsverhalten von Gesteinen beim Spaltzugversuch (Brazilian Test). Laborativ wurden drei transversalisotrope Gesteine (Granit, Schiefer und Sandstein) untersucht.
Insgesamt wurden mehr als 550 Spaltzugversuche durchgeführt, wobei der Schwerpunkt auf die Untersuchung des Einflusses der räumlichen Lage der Anisotropieebene zur Richtung des Lasteintrages auf die Bruchfestigkeit und das Bruchbild bzw. den Bruchmodus gelegt wurde. Parallel dazu wurden analytische Lösungen zur Spannungsverteilung ausgewertet sowie numerische 3D-Modelle entwickelt, um die Spannungsverteilung sowie den Bruchmodus bei einer transversalisotropen Scheibe zu untersuchen.
Es wurden neue Erkenntnisse zum Bruchmodus, der Rissausbreitung, des Einflusses der Scheibendicke, dem Einfluss des Lasteinleitungswinkel sowie des Winkels Lasteintrag - Anisotropieebene für transversalisotropes Material gewonnen.:ACKNOWLEDGMENTS 5
ABSTRACT 7
TABLE OF CONTENTS 9
LIST OF FIGURES 13
LIST OF TABLES 19
I. INTRODUCTION 21
Objective of this work 22
Scope of work 23
Research procedure 23
Significance of the work 24
Layout 24
1 STATE OF THE ART 27
1.1 Review of the Brazilian tensile strength test 27
1.1.1 General overview 27
1.1.2 Development of the Brazilian tensile strength test 29
1.1.3 The Brazilian tensile strength test on anisotropic rocks 31
1.1.4 Summary 32
1.2 Analytical aspects 33
1.2.1 Hypotheses for the conventional Brazilian test 34
1.2.2 Failure criteria 36
1.2.3 Crack initiation and propagation 39
1.2.4 Summary 41
1.3 Numerical considerations 41
1.3.1 Numerical methods 42
1.3.2 Summary 42
1.4 Conclusion 43
2 DIAMETRAL COMPRESSION IN A SOLID DISC – COMPILATION OF ANALYTICAL AND SEMI-ANALYTICAL SOLUTIONS 45
2.1 Introduction 45
2.2 Diametral compressive stress distribution in an isotropic elastic disc 45
2.2.1 Elastic theory of line load 46
2.2.2 2D analytical solutions 47
2.2.3 3D disc under line and diametral compressive distributed loads 55
2.2.4 3D solution under diametral compressive distributed load 56
2.3 Stress and strain in an isotropic solid disc 59
2.4 Stress and strain in anisotropic rocks 61
2.5 Conclusion 65
3 LABORATORY TESTS 69
3.1 Introduction 69
3.2 Laboratory test program 70
3.3 Sample preparation 71
3.4 Ultrasonic measurements 72
3.5 Uniaxial and triaxial compression tests 73
3.5.1 Uniaxial compression test 73
3.5.2 Triaxial compression tests 74
3.6 Brazilian tensile strength tests 76
3.6.1 Test apparatus 76
3.6.2 Laboratory test results 77
3.6.3 Interpretation of the test results 89
3.7 Conclusion 96
4 NUMERICAL SIMULATION OF ISOTROPIC MATERIALS - COMPARISON WITH ANALYTICAL SOLUTIONS 97
4.1 Introduction 97
4.2 Numerical simulation of isotropic materials 97
4.2.1 FLAC3D simulation program 97
4.2.2 Simulation procedure 98
4.2.3 Numerical model setup 98
4.2.4 Influence of mesh type 99
4.2.5 Influence of specimen thickness 100
4.2.6 Influence of Poisson’s ratio 102
4.2.7 Influence of loading angle (2) 106
4.2.8 Comparison of 3D analytical and numerical results 110
4.2.9 Influence of stress concentration at the loading jaws 112
4.3 Comparison with experimental results of Postaer Sandstone (FG.Ss) 112
4.4 Conclusion 114
5 NUMERICAL SIMULATION OF ANISOTROPIC MATERIALS - COMPARISON WITH LABORATORY TESTS 117
5.1 Introduction 117
5.2 General procedure for simulating the Brazilian test using FLAC3D 117
5.2.1 Conceptual model 119
5.2.2 Boundary Conditions 119
5.2.3 Numerical model set-up 120
5.3 Constitutive model 121
5.3.1 Choice of constitutive model 121
5.3.2 Bilinear Strain-Hardening/Softening Ubiquitous-Joint Model [98] 121
5.4 Parameter calibration 124
5.4.1 Material parameters used 124
5.4.2 Contact between disc and loading jaws 126
5.4.3 Post-failure deformation properties 128
5.4.4 Tension cut-off 129
5.5 Numerical simulation results 131
5.5.1 Introduction 131
5.5.2 Stress distribution and failure state 133
5.5.3 Stress state in an isotropic elastic medium with arbitrary orientation planes 136
5.5.4 Plasticity states 139
5.5.5 Damage and fracture process 141
5.5.6 Fracture patterns – Comparison of lab results and numerical simulations 148
5.6 Tensile strength – Comparison of lab results and numerical simulations 149
5.6.1 Tensile strength of Le.Gs Gneiss 150
5.6.2 Tensile strength of My.Sc Slate 155
5.7 Summary and Review 159
5.7.1 Potential failure state deduced from pure elastic considerations 159
5.7.2 Tensile strength distribution 160
5.7.3 Tensile strength – determining the anisotropy factor 161
5.7.4 Tensile strength – different procedures - different results 163
6 CONCLUSION AND RECOMMENDATIONS 165
APPENDICES 171
Appendix 3.1 - Fracture patterns in FG.Ss samples 171
Appendix 3.2 - Fracture patterns in FG.Gs samples 177
Appendix 3.3 - Fracture patterns in Le.Gs samples 183
Appendix 3.4 - Fracture patterns in My.Sc samples 190
Appendix 4.1 - Influence of loading angle 197
Appendix 4.2 - Influence of material properties 203
Appendix 5.1 - Failure zone state in Le.Gs Gneiss 209
Appendix 5.2: Failure zone state in My.Sc Slate 216
REFERENCES 223
|
9 |
Unconventional reservoir characterization using real samples based on differential thermal analysis, evaluation of rock parameters, and HC extraction using HP-CO2 aiming reservoir recovery recommendationsMuktadir, A. T. M. Golam 02 March 2022 (has links)
To meet the global hydrocarbon energy demand, it is imperative either to enhance the production from existing fields by applying innovative engineering solutions or discovering new field /resource areas. Both of these options are investigated by petroleum engineers intensively to tackle the challenges of meeting the ever-increasing demand. Meeting the energy demand as, like any other developing country, Jordan is facing a formidable challenge and requires exploration for conventional and unconventional hydrocarbon resources. As Jordan has a long exploration history for conventional reservoirs, Unconventional resource exploration and production seems to be the way to find new energy sources. Different exploration wells were drilled to evaluate the hydrocarbon potential. This research work is focusing on an experimental investigation to evaluate Jordanian hydrocarbon potential as well as to provide recommendations for future exploration activities in shale resources. The Evaluations were performed through comprehensive laboratory experiments that include measurements of Total Organic Content, Grain density, Pore Size Distribution, Specific Surface Area (BET), Mineralogy, Thermogravimetry Analysis, and Rock-Eval pyrolysis.
The petrophysical properties (TOC, grain density, pore size distribution) of Jordanian shale (nine different wells) are investigated. The TOC and grain density are in an inversely proportional relationship. The TOC results show a gradual increment with the depth. All the samples have higher porosity dominated by macro pores. Fourteen (14) samples were selected primarily based on TOC (above 1.5%) for further analysis. The specific surface area results show a proportional relationship with the TOC content. Considering the petrophysical properties and mineralogy, these Jordanian shales broadly can be considered as high porosity clay and mudstone type of shale.
Thermogravimetry analysis (TG/DTG) results indicate quantitative information related to organic and inorganic matter. Detection of thermos-reactive minerals, especially clay, carbonate, muscovite, pyrite is possible due to the combination of TG/DTG/DSC. The samples are examined under three different procedures which includes different heating programs. The oxidizing and inert atmospheric conditions (procedure i & ii) have the same heating program whereas procedure iii (inert atmospheric condition) has a heating program similar to the Rock-Eval pyrolysis program. The results of these samples show the complex nature of shale as well as organic matter by reacting in different stages (two or, three stages). Depending of the maturity of organic matter, the reaction occurring temperature range varies. Maximum oxidization reaction peaks happen between 479°C to 502°C. The maximum pyrolysis reaction peaks between 498°C to 521°C. Compared with complex heating (procedure iii) and rock Eval pyrolysis, S2 results indicate a high amount of inorganic compounds. Considering TGA reaction peaks and rock Eval pyrolysis results, these Jordanian shales indicate immature with low hydrocarbon generation potential.
The Jordanian shale samples are analyzed by using Rock-Eval pyrolysis. Analysis results are used to interpret petroleum potential in rocks. The most important information includes organic matter types (also connected with the depositional settings), organic matter thermal maturity, and the remaining hydrocarbon generation potential in the current form. The organic geochemical analysis results indicate mostly poor to no source rock potential except JF2-760 samples. The hydrogen index (HI) and oxygen index (OI) result suggests that type iii kerogen and type iii/ iv kerogen are most likely from terrestrial and varied settings origin. The low hydrogen, as well as, low S2 value indicate very little hydrocarbon generation potential. Similarly, The Tmax and PI data indicate immature to early mature source rock status and low conversion scenario.
Furthermore, the supercritical CO2 is injected into the samples, which is similar to gas flooding experiments to understand the recovery process. Hydrocarbon recovery or, CO2-shale interaction is determined by comparing three different properties (TOC, SSA, and TGA) pre-and-post supercritical CO2 injection. Supercritical CO2 injection in immature shale shows very limited property changes (TOC, SSA, and TGA) to the samples. However, in presence of hydrocarbon the pre-and post-injection property changes TOC, TGA, and SSA (BET) are noticeable enough to conclude HC recovery. Although in the case of immature shale with no hydrocarbon potential the kerogen or bitumen extraction has not been detected, which can be significant in the case of greenhouse gas storage, especially CCUS. This could reduce the risk of Organic Matter (OM) migration possibility in case immature shale formation is present in a suitable geological location.
|
10 |
Determination of elastic (TI) anisotropy parameters from Logging-While-Drilling acoustic measurements - A feasibility studyDemmler, Christoph 07 January 2022 (has links)
This thesis provides a feasibility study on the determination of formation anisotropy parameters from logging-while-drilling (LWD) borehole acoustic measurements. For this reason, the wave propagation in fluid-filled boreholes surrounded by transverse isotropic (TI) formations is investigated in great detail using the finite-difference method. While the focus is put on quadrupole waves, the sensitivities of monopole and flexural waves are evaluated as well. All three wave types are considered with/without the presence of an LWD tool. Moreover, anisotropy-induced mode contaminants are discussed for various TI configurations. In addition, the well-known plane wave Alford rotation has been generalized to cylindrical borehole waves of any order, except for the monopole. This formulation has been extended to allow for non-orthogonal multipole firings, and associated inversion methods have been developed to compute formation shear principal velocities and accompanying polarization directions, utilizing various LWD (cross-) quadrupole measurements.:1 Introduction
1.1 Borehole acoustic configurations
1.2 Wave propagation in a fluid-filled borehole in the absence of a logging tool
1.3 Wave propagation in a fluid-filled borehole in the presence of a logging tool
1.4 Anisotropy
2 Theory
2.1 Stiffness and compliance tensor
2.1.1 Triclinic symmetry
2.1.2 Monoclinic symmetry
2.1.3 Orthotropic symmetry
2.1.4 Transverse isotropic (TI) symmetry
2.1.5 Isotropy
2.2 Reference frames
2.3 Seismic wave equations for a linear elastic, anisotropic medium
2.3.1 Basic equations
2.3.2 Integral transforms
2.3.3 Christoffel equation
2.3.4 Phase slowness surfaces
2.3.5 Group velocity
2.4 Solution in cylindrical coordinates for the borehole geometry
2.4.1 Special case: vertical transverse isotropy (VTI)
2.4.2 General case: triclinic symmetry
3 Finite-difference modeling of wave propagation in anisotropic media
3.1 Finite-difference method
3.2 Spatial finite-difference grids
3.2.1 Standard staggered grid
3.2.2 Lebedev grid
3.3 Heterogeneous media
3.4 Finite-difference properties and grid dispersion
3.5 Initial conditions
3.6 Boundary conditions
3.7 Parallelization
3.8 Finite-difference parameters
4 Wave propagation in fluid-filled boreholes surrounded by TI media
4.1 Vertical transverse isotropy (VTI)
4.1.1 Monopole excitation
4.1.2 Dipole excitation
4.1.3 Quadrupole excitation
4.1.4 Summary
4.2 Horizontal transverse isotropy (HTI)
4.2.1 Monopole excitation
4.2.2 Theory of cross-multipole shear wave splitting
4.2.3 Dipole excitation
4.2.4 Quadrupole excitation
4.2.5 Hexapole waves
4.2.6 Summary
4.3 Tilted transverse isotropy (TTI)
4.3.1 Monopole excitation
4.3.2 Dipole excitation
4.3.3 Quadrupole excitation
4.3.4 Summary
4.4 Anisotropy-induced mode contaminants
4.4.1 Vertical transverse isotropy (VTI)
4.4.2 Horizontal transverse isotropy (HTI)
4.4.3 Tilted transverse isotropy (TTI)
4.4.4 Summary
5 Inversion methods
5.1 Vertical transverse isotropy (VTI)
5.2 Horizontal transverse isotropy (HTI)
5.2.1 Inverse generalized Alford rotation
5.2.2 Inversion method based on dipole excitations
5.2.3 Inversion method based on quadrupole excitations
5.3 Tilted transverse isotropy (TTI)
5.4 Challenges in real measurements
5.4.1 Signal-to-noise ratio (SNR)
5.4.2 Tool eccentricity
6 Conclusions
References
List of Abbreviations and Symbols
List of Figures
List of Tables
A Integral transforms
A.1 Laplace transform
A.2 Spatial Fourier transform
A.3 Azimuthal Fourier transform
A.4 Meijer transform
B Stiffness and compliance tensor
B.1 Rotation between reference frames
B.2 Cylindrical coordinates
C Christoffel equation
C.1 Cartesian coordinates
C.2 Cylindrical coordinates
D Processing of borehole acoustic waveform array data
D.1 Time-domain methods
D.2 Frequency-domain methods
D.2.1 Weighted spectral semblance method
D.2.2 Modified matrix pencil method
|
Page generated in 0.217 seconds