Spelling suggestions: "subject:"bohrspülung"" "subject:"bohrspülungen""
1 |
Bohrspülungen zur Erschließung mariner Gashydratlagerstätten - inhibierende und stabilisierende Additive sowie verbesserte rheologische CharakterisierungSchulz, Anne 19 March 2015 (has links) (PDF)
Gashydrate sind natürlich vorkommende feste Verbindungen aus Wasser und Gas, deren Erschließung als zukünftige Energiequelle von Interesse ist. Für die bohrtechnische Erschließung mariner Gashydratlagerstätten ist eine leistungsfähige Bohrspülung notwendig. Das vom Bohrmeißel gelockerte Sediment und darin enthaltenes Gashydrat werden durch die Bohrspülung nach übertage transportiert. Die Gashydratpartikel verlassen beim Aufsteigen im Ringraum in ca. 300 m Wassertiefe ihren Stabilitätsbereich und dissoziieren in Wasser und Gas. Um eine Verdünnung und eine Dichteerniedrigung der Bohrspülung zu verhindern, soll das Gashydratbohrklein stabilisiert werden. Gleichzeitig darf sich in der Bohrspülung bei Anwesenheit von freiem Gas in der Lagerstätte kein neues Gashydrat bilden. Die Arbeit beschäftigt sich mit der Suche nach Additiven, welche die Gashydratneubildung und -dissoziation gleichzeitig hemmen. Es wurde ein Schüttelautoklav genutzt, um die Dissoziationstemperatur von Methanhydrat bei ca. 85 bar zu ermitteln und die Verzögerung des Hydratzerfalls bei Anwesenheit verschiedener Additive zu vergleichen. Es konnte ein Additiv gefunden werden, das diese Anforderungen erfüllt. Des Weiteren wurden neue rheologische Untersuchungsprogramme für verschiedene Spülungstypen erarbeitet, die eine detaillierte Charakterisierung der Fließfähigkeit, Thixotropie und Geleigenschaften von Bohrspülungen erlauben.
|
2 |
Bohrspülungen zur Erschließung mariner Gashydratlagerstätten - inhibierende und stabilisierende Additive sowie verbesserte rheologische Charakterisierung: Bohrspülungen zur Erschließung mariner Gashydratlagerstätten - inhibierende und stabilisierende Additive sowie verbesserte rheologische CharakterisierungSchulz, Anne 20 February 2015 (has links)
Gashydrate sind natürlich vorkommende feste Verbindungen aus Wasser und Gas, deren Erschließung als zukünftige Energiequelle von Interesse ist. Für die bohrtechnische Erschließung mariner Gashydratlagerstätten ist eine leistungsfähige Bohrspülung notwendig. Das vom Bohrmeißel gelockerte Sediment und darin enthaltenes Gashydrat werden durch die Bohrspülung nach übertage transportiert. Die Gashydratpartikel verlassen beim Aufsteigen im Ringraum in ca. 300 m Wassertiefe ihren Stabilitätsbereich und dissoziieren in Wasser und Gas. Um eine Verdünnung und eine Dichteerniedrigung der Bohrspülung zu verhindern, soll das Gashydratbohrklein stabilisiert werden. Gleichzeitig darf sich in der Bohrspülung bei Anwesenheit von freiem Gas in der Lagerstätte kein neues Gashydrat bilden. Die Arbeit beschäftigt sich mit der Suche nach Additiven, welche die Gashydratneubildung und -dissoziation gleichzeitig hemmen. Es wurde ein Schüttelautoklav genutzt, um die Dissoziationstemperatur von Methanhydrat bei ca. 85 bar zu ermitteln und die Verzögerung des Hydratzerfalls bei Anwesenheit verschiedener Additive zu vergleichen. Es konnte ein Additiv gefunden werden, das diese Anforderungen erfüllt. Des Weiteren wurden neue rheologische Untersuchungsprogramme für verschiedene Spülungstypen erarbeitet, die eine detaillierte Charakterisierung der Fließfähigkeit, Thixotropie und Geleigenschaften von Bohrspülungen erlauben.
|
3 |
Simulation and modeling of pressure pulse propagation in fluids inside drill stringsNamuq, Mohammed Ali 21 March 2013 (has links) (PDF)
Modern bottom-hole assemblies are equipped with various sensors which measure the geological and directional information of the borehole while drilling. It is very crucial to get the measured downhole information to the surface in real time in order to be able to monitor, steer and optimize the drilling process while drilling. The transmission of the information to the surface is most commonly carried out by coded pressure pulses (the technology called mud pulse telemetry) which propagate through the drilling mud inside the drill string towards the surface. However, hardly any specific experimental research on the hydraulic data transmission can be found in the literature. Moreover, it is essential to use a reliable model/simulation tool which can more accurately simulate the pressure pulse propagation in fluids inside drill strings under various drilling operation conditions in order to improve the performance of the data transmission process. The aims of this study are to develop and test a laboratory experimental setup, a simulation model and a novel method for detecting and decoding of measurement while drilling pressure pulse propagation in fluids inside drill strings.
This thesis presents a laboratory experimental setup for investigating the process of data transmission in boreholes by mud pulse telemetry. The test facility includes a flow loop, a centrifugal pump, a positive mud pulser or alternatively a mud siren, pressure transducers at four different locations along the flow loop and a data collection system. Moreover, it includes an “actuator system” for the simulation of typical noise patterns created by the common duplex or triplex mud pumps. This laboratory setup with great capabilities opens the way for testing and developing new concepts for data transmission.
A theoretical model using ANSYS CFX11 (Computational Fluid Dynamics (CFD) commercial code) was successfully developed to simulate dynamic pressure pulse transmission behavior in the fluid inside the flow loop. The collected laboratory data which simulate various data transmission processes in boreholes were used to verify and calibrate the theoretical method. A pretty good agreement is achieved between the predicted and measured pressure pulses at different locations along the flow loop for positive pulses with various durations using different flow rates and for continuous pressure pulses using different carrier frequencies.
A novel approach (continuous wavelet transformation) for detecting and decoding the received continuous pressure pulses in a noisy environment was applied to various simulated drilling operation conditions for data transmission in boreholes in the laboratory. The concept was registered at the German Patent and Trade Mark Office (DPMA) for a patent in 2011. The results indicate that the continuous wavelet transformation can be used to clearly identify and better detect the continuous pressure pulse periods, frequencies and discontinuity positions in the time domain compared to the conventional method (Fourier transformation). This method will contribute to the possibility of transmitting the data at higher rates and over longer distances.
A concept for developing an innovative pulser using electrical discharge or acoustic sources for inducing pulses keeping the drill strings fully open (eliminating the problem of plugging the pulser by pumped lost circulation materials) and without any mechanical moving parts (eliminating the failure related to the pulser moving parts) was also registered at the German Patent and Trade Mark Office (DPMA) for a patent in 2012. With this pulser, it is expected that it would be possible to transmit the data over longer distances and at higher rates. Realizing the concept of the new pulser and using continuous wavelet transformation for detecting and decoding the pulser signal are recommended for future work.
|
4 |
Simulation and modeling of pressure pulse propagation in fluids inside drill stringsNamuq, Mohammed Ali 20 February 2013 (has links)
Modern bottom-hole assemblies are equipped with various sensors which measure the geological and directional information of the borehole while drilling. It is very crucial to get the measured downhole information to the surface in real time in order to be able to monitor, steer and optimize the drilling process while drilling. The transmission of the information to the surface is most commonly carried out by coded pressure pulses (the technology called mud pulse telemetry) which propagate through the drilling mud inside the drill string towards the surface. However, hardly any specific experimental research on the hydraulic data transmission can be found in the literature. Moreover, it is essential to use a reliable model/simulation tool which can more accurately simulate the pressure pulse propagation in fluids inside drill strings under various drilling operation conditions in order to improve the performance of the data transmission process. The aims of this study are to develop and test a laboratory experimental setup, a simulation model and a novel method for detecting and decoding of measurement while drilling pressure pulse propagation in fluids inside drill strings.
This thesis presents a laboratory experimental setup for investigating the process of data transmission in boreholes by mud pulse telemetry. The test facility includes a flow loop, a centrifugal pump, a positive mud pulser or alternatively a mud siren, pressure transducers at four different locations along the flow loop and a data collection system. Moreover, it includes an “actuator system” for the simulation of typical noise patterns created by the common duplex or triplex mud pumps. This laboratory setup with great capabilities opens the way for testing and developing new concepts for data transmission.
A theoretical model using ANSYS CFX11 (Computational Fluid Dynamics (CFD) commercial code) was successfully developed to simulate dynamic pressure pulse transmission behavior in the fluid inside the flow loop. The collected laboratory data which simulate various data transmission processes in boreholes were used to verify and calibrate the theoretical method. A pretty good agreement is achieved between the predicted and measured pressure pulses at different locations along the flow loop for positive pulses with various durations using different flow rates and for continuous pressure pulses using different carrier frequencies.
A novel approach (continuous wavelet transformation) for detecting and decoding the received continuous pressure pulses in a noisy environment was applied to various simulated drilling operation conditions for data transmission in boreholes in the laboratory. The concept was registered at the German Patent and Trade Mark Office (DPMA) for a patent in 2011. The results indicate that the continuous wavelet transformation can be used to clearly identify and better detect the continuous pressure pulse periods, frequencies and discontinuity positions in the time domain compared to the conventional method (Fourier transformation). This method will contribute to the possibility of transmitting the data at higher rates and over longer distances.
A concept for developing an innovative pulser using electrical discharge or acoustic sources for inducing pulses keeping the drill strings fully open (eliminating the problem of plugging the pulser by pumped lost circulation materials) and without any mechanical moving parts (eliminating the failure related to the pulser moving parts) was also registered at the German Patent and Trade Mark Office (DPMA) for a patent in 2012. With this pulser, it is expected that it would be possible to transmit the data over longer distances and at higher rates. Realizing the concept of the new pulser and using continuous wavelet transformation for detecting and decoding the pulser signal are recommended for future work.
|
5 |
Determination of elastic (TI) anisotropy parameters from Logging-While-Drilling acoustic measurements - A feasibility studyDemmler, Christoph 07 January 2022 (has links)
This thesis provides a feasibility study on the determination of formation anisotropy parameters from logging-while-drilling (LWD) borehole acoustic measurements. For this reason, the wave propagation in fluid-filled boreholes surrounded by transverse isotropic (TI) formations is investigated in great detail using the finite-difference method. While the focus is put on quadrupole waves, the sensitivities of monopole and flexural waves are evaluated as well. All three wave types are considered with/without the presence of an LWD tool. Moreover, anisotropy-induced mode contaminants are discussed for various TI configurations. In addition, the well-known plane wave Alford rotation has been generalized to cylindrical borehole waves of any order, except for the monopole. This formulation has been extended to allow for non-orthogonal multipole firings, and associated inversion methods have been developed to compute formation shear principal velocities and accompanying polarization directions, utilizing various LWD (cross-) quadrupole measurements.:1 Introduction
1.1 Borehole acoustic configurations
1.2 Wave propagation in a fluid-filled borehole in the absence of a logging tool
1.3 Wave propagation in a fluid-filled borehole in the presence of a logging tool
1.4 Anisotropy
2 Theory
2.1 Stiffness and compliance tensor
2.1.1 Triclinic symmetry
2.1.2 Monoclinic symmetry
2.1.3 Orthotropic symmetry
2.1.4 Transverse isotropic (TI) symmetry
2.1.5 Isotropy
2.2 Reference frames
2.3 Seismic wave equations for a linear elastic, anisotropic medium
2.3.1 Basic equations
2.3.2 Integral transforms
2.3.3 Christoffel equation
2.3.4 Phase slowness surfaces
2.3.5 Group velocity
2.4 Solution in cylindrical coordinates for the borehole geometry
2.4.1 Special case: vertical transverse isotropy (VTI)
2.4.2 General case: triclinic symmetry
3 Finite-difference modeling of wave propagation in anisotropic media
3.1 Finite-difference method
3.2 Spatial finite-difference grids
3.2.1 Standard staggered grid
3.2.2 Lebedev grid
3.3 Heterogeneous media
3.4 Finite-difference properties and grid dispersion
3.5 Initial conditions
3.6 Boundary conditions
3.7 Parallelization
3.8 Finite-difference parameters
4 Wave propagation in fluid-filled boreholes surrounded by TI media
4.1 Vertical transverse isotropy (VTI)
4.1.1 Monopole excitation
4.1.2 Dipole excitation
4.1.3 Quadrupole excitation
4.1.4 Summary
4.2 Horizontal transverse isotropy (HTI)
4.2.1 Monopole excitation
4.2.2 Theory of cross-multipole shear wave splitting
4.2.3 Dipole excitation
4.2.4 Quadrupole excitation
4.2.5 Hexapole waves
4.2.6 Summary
4.3 Tilted transverse isotropy (TTI)
4.3.1 Monopole excitation
4.3.2 Dipole excitation
4.3.3 Quadrupole excitation
4.3.4 Summary
4.4 Anisotropy-induced mode contaminants
4.4.1 Vertical transverse isotropy (VTI)
4.4.2 Horizontal transverse isotropy (HTI)
4.4.3 Tilted transverse isotropy (TTI)
4.4.4 Summary
5 Inversion methods
5.1 Vertical transverse isotropy (VTI)
5.2 Horizontal transverse isotropy (HTI)
5.2.1 Inverse generalized Alford rotation
5.2.2 Inversion method based on dipole excitations
5.2.3 Inversion method based on quadrupole excitations
5.3 Tilted transverse isotropy (TTI)
5.4 Challenges in real measurements
5.4.1 Signal-to-noise ratio (SNR)
5.4.2 Tool eccentricity
6 Conclusions
References
List of Abbreviations and Symbols
List of Figures
List of Tables
A Integral transforms
A.1 Laplace transform
A.2 Spatial Fourier transform
A.3 Azimuthal Fourier transform
A.4 Meijer transform
B Stiffness and compliance tensor
B.1 Rotation between reference frames
B.2 Cylindrical coordinates
C Christoffel equation
C.1 Cartesian coordinates
C.2 Cylindrical coordinates
D Processing of borehole acoustic waveform array data
D.1 Time-domain methods
D.2 Frequency-domain methods
D.2.1 Weighted spectral semblance method
D.2.2 Modified matrix pencil method
|
6 |
Development and testing of alternative methods for speeding up the hydraulic data transmission in deep boreholesBerro, Mouhammed Jandal 15 February 2019 (has links)
For developing the available hydrocarbon reserves and for exploring new reservoirs, deeper and more complex wells are drilled. Drilling such deeper and complex wells requires a constant monitoring and controlling of the well paths. Therefore, the bottom hole assembly, the lower section of the drill string above the drill bit, is equipped with numerous measuring sensors for collecting geological and directional data while drilling. The collected data have to be transmitted to the surface in real time.
Prior to transmit the data measured downhole to the surface, they are processed and translated into a binary code. Accordingly, the data will be represented as a series of zeroes and ones. The most common method for data transmission in boreholes is the so called mud pulse telemetry which sends the information through the drilling mud inside the drill string by means of coded pressure pulses. There are two types of devices available for downhole pressure pulses generation. The first type is the (positive or negative) pressure pulser which transmits the data by quasi-static variations of the pressure level inside the drill string. The second type is the (rotating or oscillating) mud siren which transmits the data by generating continuous pressure waves at specific frequencies.
The main disadvantage of the mud pulse telemetry is its low data transmission rate which is about 10 bps. This data rate is very low compared to the measured amount of raw data. Therefore, the efficiency of the mud pulse telemetry must be improved, so that the data could be transmitted at higher rates. The present research work presents different developed and tested concepts for increasing the efficiency and the data transmission rate of the mud pulse telemetry. Both, the transmitter and the receiver end, were taken into consideration by developing the new concepts. Different hardware and software tools were used for performing the present research work. The available flow loop test facility and the experimental prototypes of the mud siren and positive pulser were used. The test facility was extended in order to enable the investigation of the new concepts. The available 3D numerical model (ANSYS CFX) was modified and extended in order to study the new concepts.
At the transmitter end, a novel concept for a hybrid mud pulse telemetry system was developed and successfully tested. Here, two different types of mud pulse telemetry could be used in a combination, such as a mud siren and a pressure pulser. The developed concept was registered at the German Patent and Trade Mark Office for a patent in 2018. Two concepts for a multi-frequency mud siren were developed for simultaneous generation of two frequencies. In the first approach, two sets of stator/rotor were installed in a row connection, while they were installed in a parallel connection in the second approach. The two concepts were registered at the German Patent and Trade Mark Office for patents in 2015. An experimental multi-frequency generator was built and used for testing of several new ideas, such as transmitting the data using several carrier frequencies at the same time, transmitting the data with different wave forms (sine, sawtooth, triangle and rectangle), or transmitting the data using the chirp modulation. The innovative design of the experimental multi-frequency generator was registered at the German Patent and Trade Mark Office for patents in 2016.
At the receiver end, two different methods for processing and analyzing the received multi-frequency signals using the Wavelet and Fourier analysis were drafted and tested. A novel concept for the use of a multi-sensor receiver was developed and successfully tested. The use of a multi-sensor receiver could strongly improve the detection of the received signals.:Table of Contents
Declaration ii
Abstract iii
Acknowledgements v
Table of Contents vi
List of Abbreviations x
List of Symbols xii
CHAPTER 1 Introduction 1
CHAPTER 2 Modern Drilling Technology and Low Data Transmission Rate as a Limitation 5
2.1 Introduction to the modern drilling technology 5
2.1.1 Directional drilling technology 5
2.1.2 Steering technology 6
2.1.3 Measuring technology 8
2.1.4 Technology of data transmission in boreholes 9
2.2 Low data transmission rate as a problem with respect to the whole drilling process 13
CHAPTER 3 Fundamentals of Communication Technology 16
3.1 Modulation techniques for data transmission in baseband 16
3.2 Modulation techniques for data transmission in passband 17
3.3 Multiple frequency and chirp spread spectrum modulation techniques 19
3.4 Digital signal processing 21
3.4.1 Fourier transformation 21
3.4.2 Continuous wavelet transformation 23
3.4.3 Filtering 24
CHAPTER 4 State of the Art for Mud Pulse Telemetry Systems 26
4.1 Historical development of mud pulse telemetry including latest improvements applied for increasing its data transmission rate 26
4.2 Available types of mud pulse telemetry devices 30
4.2.1 Negative pulser 31
4.2.2 Positive pulser 32
4.2.3 Mud siren 32
4.2.4 Oscillating shear valve 33
4.3 Limitations of data transmission via mud pulse telemetry 34
4.3.1 Effect of noise sources in the mud channel on the transmission signal 34
4.3.2 Effect of attenuation in the mud channel on the transmission signal 36
4.3.3 Effect of reflections and their interference with the main transmission signal 37
4.3.4 Pass and stop bands 38
4.4.5 Minimum transmission time slot 38
CHAPTER 5 Novel Concepts and Tools for Increased Data Transmission Rates of Mud Pulse Telemetry 40
5.1 Transmitter end 41
5.1.1 Hybrid mud pulse telemetry (HMPT) 41
5.1.2 Multi-frequency generator 43
5.2 Receiver end 45
5.2.1 Investigation of the Wavelet analysis suitability for multi-frequency signal detection 45
5.2.2 Flexible placement of multi-sensor receiver 46
CHAPTER 6 Laboratory Test Facility and Used Hard and Soft Tools 49
6.1 Laboratory test facility for hydraulic data transmission in boreholes 49
6.2 Experimental prototypes of the pressure pulsers and mud siren 53
6.3 3D numerical simulation model for the test facility and mud siren 55
6.4 MATLAB software 58
CHAPTER 7 Hybrid Mud Pulse Telemetry (HMPT) System 59
7.1 Combination of mud siren and negative pressure pulser 60
7.2 Combination of mud siren and positive pressure pulser 63
7.3 Evaluating the laboratory investigations of the hybrid mud pulse telemetry (HMPT) system 66
CHAPTER 8 Mathematical and Numerical Investigation of the Concept of the Multi-Frequency Mud Siren 68
8.1 Preliminary considerations for the concept of the multi-frequency mud siren 69
8.2 Mathematical model investigation of different approaches for the multi-frequency mud siren concept 71
8.2.1 Multi-frequency mud siren with stators and rotors in a row 72
8.2.2 Multi-frequency mud siren with parallel connection of stators and rotors 74
8.3 Numerical model investigation of multi-frequency mud siren with two sets of stator/rotor in a row 77
8.3.1 Numerical simulations for data transmission with a multi-frequency mud siren using two carrier frequencies 79
8.3.2 Evaluation of the simulation results 81
8.3.3 Increasing the transmission reach of the mud siren for deep drilling operations 83
CHAPTER 9 Laboratory Investigations of Multi-Carrier Hydraulic Data Transmission Using an Experimental Multi-Frequency Generator 85
9.1 Laboratory multi-carrier frequency transmission tests 87
9.2 Investigation of the Wavelet analysis suitability for the detection of multi-frequency signal transmitted in boreholes 95
9.3 Initial investigations of hydraulic data transmission using chirp modulation and different pressure wave forms 100
9.3.1 Data transmission using chirp modulation (Chirp Spread Spectrum, CSS) 100
9.3.2 Data transmission using different wave forms 101
CHAPTER 10 Investigation of the Use of a Multi-Sensor Receiver for Improving the Hydraulic Data Transmission in Boreholes 104
10.1 Numerical model investigation of the use of a multi-sensor receiver 104
10.1.1 Data transmission using single-input and multiple-output (SIMO) 104
10.1.2 Data transmission using multiple-input and multiple-output (MIMO) 107
10.2 Laboratory investigations of the use of a multi-sensor receiver 108
10.3 Evaluating the use of a multi-sensor receiver for improving the hydraulic data transmission in boreholes 112
CHAPTER 11 Conclusion and Outlook 116
11.1 Conclusion 116
11.2 Outlook 120
References 122
List of Figures 129
List of Tables 136
List of Publications 137
List of Patents 138
Appendix- Chapter 7 139
Appendix- Chapter 8 141
Appendix- Chapter 9 142
Appendix- Chapter 10 146
|
Page generated in 0.0479 seconds