The objective of this research was to study the adsorption and photodegradation of crystal violet (CV) dye by using poly(2-hydroxyethylmethacrylate) (PHEMA) hydrogel and nanocomposite TiO2-PHEMA hydrogel. Since the TiO2 nanoparticle has poor solubility, another goal of this study was to make a uniform TiO2 nanocomposite gel. These gels can be used in water treatment and can be easily photodegrade by exposure of sunlight which is similar to exposing to UV-vis. PHEMA was synthesized by free radical polymerization. The nanocomposite gels were characterized by FT-IR and XRD to confirm the presence of TiO2 nanoparticles and CV dye inside the PHEMA hydrogel. The XRD data showed that not only maintaining the crystallinity of the three different phases that had been used, but also the uptake of the dye inside the nanocomposite gels. Moreover, the FT-IR demonstrated the presence of the functional groups of the chemical structure of the gel as well as the nanocomposite gels with the CV dye. The adsorption of CV dye was examined through monitoring UV-Vis absorption. The kinetic study indicated the adsorption of the dye by the nanocomposite gels until reached equilibrium, which is the zero concentration. The photodegradation of CV dye was examined using a medium pressure Hg lamp. It was determined that the composite gels adsorb CV dye from the solution at the beginning while under the photochemical condition. Eventually, the dye in the gel was photodegraded, indicating that in the gel system, the photodegradation process is still effective to dyes. The composite gels containing pure anatase phase titanium are much better photocatalysts and took less time of adsorption than those containing pure rutile and anatase/rutile mixed phases of titania.

No description available.

The effects of different types and amounts of dissolved organic matter (DOM) on the isotope fractionation of Hg isotopes during aqueous photo-reduction of monomethylmercury (MMHg) were investigated to assess whether mass-independent fractionation (MIF) signatures can be used to track photo-degradation of MMHg in natural waters. From experiments conducted with different amounts of reduced organic sulfur (Sred-DOM), it appears that MIF during photo-reduction may be dependent on whether MMHg is dominantly bound to Sred-DOM. Similar fractionation factors were observed for experiments where Sred-DOM was in far excess of MMHg, while significantly lower fractionation factors were observed with lower Sred-DOM. We also characterized the signature of MIF (i.e. Δ199Hg/Δ201Hg) during MMHg photo-degradation to assess if it was similar in different matrices. The experimental Δ199Hg/Δ201Hg was very similar for different matrices. However, the experimental slope is slightly but statistically different than the slope observed in freshwater fish, which preserve MMHg in nature.

The effects of different types and amounts of dissolved organic matter (DOM) on the isotope fractionation of Hg isotopes during aqueous photo-reduction of monomethylmercury (MMHg) were investigated to assess whether mass-independent fractionation (MIF) signatures can be used to track photo-degradation of MMHg in natural waters. From experiments conducted with different amounts of reduced organic sulfur (Sred-DOM), it appears that MIF during photo-reduction may be dependent on whether MMHg is dominantly bound to Sred-DOM. Similar fractionation factors were observed for experiments where Sred-DOM was in far excess of MMHg, while significantly lower fractionation factors were observed with lower Sred-DOM. We also characterized the signature of MIF (i.e. Δ199Hg/Δ201Hg) during MMHg photo-degradation to assess if it was similar in different matrices. The experimental Δ199Hg/Δ201Hg was very similar for different matrices. However, the experimental slope is slightly but statistically different than the slope observed in freshwater fish, which preserve MMHg in nature.

Polymer solar cells are promising in that they are inexpensive to produce, and due to their mechanical flexibility have the potential for use in applications not possible for more traditional types of solar cells. The performance of polymer solar cells depends strongly on the distribution of electron donor and acceptor material in the active layer. Understanding the connection between morphology and performance as well as how to control the morphology, is therefore of great importance. Furthermore, improving the lifetime of polymer solar cells has become at least as important as improving the efficiency.   In this thesis, the relation between morphology and solar cell performance is studied, and the material stability for blend films of the thiophene-quinoxaline copolymer TQ1 and the fullerene derivatives PCBM and PC70BM. Atomic force microscopy (AFM) and scanning transmission X-ray microscopy (STXM) are used to investigate the lateral morphology, secondary ion mass spectrometry (SIMS) to measure the vertical morphology and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to determine the surface composition. Lateral phase-separated domains are observed whose size is correlated to the solar cell performance, while the observed TQ1 surface enrichment does not affect the performance. Changes to the unoccupied molecular orbitals as a result of illumination in ambient air are observed by NEXAFS spectroscopy for PCBM, but not for TQ1. The NEXAFS spectrum of PCBM in a blend with TQ1 changes more than that of pristine PCBM. Solar cells in which the active layer has been illuminated in air prior to the deposition of the top electrode exhibit greatly reduced electrical performance. The valence band and absorption spectrum of TQ1 is affected by illumination in air, but the effects are not large enough to account for losses in solar cell performance, which are mainly attributed to PCBM degradation at the active layer surface. / The performance of polymer solar cells depends strongly on the distribution of electron donor and acceptor material in the active layer. Understanding the connection between morphology and performance as well as how to control the morphology, is therefore of great importance. Furthermore, improving the lifetime has become at least as important as improving the efficiency for polymer solar cells to become a viable technology.   In this work, the relation between morphology and solar cell performance is studied as well as the material stability for polymer:fullerene blend films. A combination of microscopic and spectroscopic methods is used to investigate the lateral and vertical morphology as well as the surface composition. Lateral phase-separated domains are observed whose size is correlated to the solar cell performance, while the observed surface enrichment of polymer does not affect the performance. Changes to the unoccupied molecular states as a result of illumination in ambient air are observed for the fullerene, but not for the polymer, and fullerenes in a blend change more than pristine fullerenes. Solar cells in which the active layer has been illuminated exhibit greatly reduced electrical performance, mainly attributed to fullerene degradation at the active layer surface. / <p>Paper 2 ingick som manuskript i avhandlingen. Nu publicerad. </p>

De par leur diversité et leur large gamme d’applications, les polymères se sont imposés dans notre environnement. Dans le cas d’applications techniques ces matériaux peuvent être exposés à des environnements agressifs conduisant à une altération de leurs propriétés. Les effets de cette dégradation sont reliés à la notion de durée de vie, c'est-à-dire au temps nécessaire pour qu’une propriété atteigne un seuil en dessous duquel le matériau devient inutilisable. Le suivi du vieillissement des matériaux polymères présente donc des enjeux importants. La spectroscopie de fluorescence est une technique qui permet d’apporter certaines réponses à ce problème. Dans le cadre de cette étude, l’accent a été porté sur l’utilisation de la spectroscopie de fluorescence pour l’étude des phénomènes intervenant lors de l’irradiation UV ou de la sollicitation mécanique d’un polymère. Dans le cas du polyéthylène haute densité, l’absence de signal fluorescent intrinsèque impose l’ajout d’un colorant. Ce colorant donnant une réponse en fluorescence dépendant de son microenvironnement, toutes modifications des chaînes du polymère engendrent un déplacement du pic de fluorescence de la sonde. Ce travail peut être séparé en deux grandes parties indépendantes, d’un coté l’influence du vieillissement UV sur la réponse fluorescente et de l’autre l’influence d’une sollicitation mécanique. Dans la première partie, l’utilisation de techniques complémentaires telles que l’IRTF ou l’AED a permis de corréler les différents résultats avec les mécanismes de vieillissement connus du polyéthylène. Les résultats obtenus dans cette partie montrent la grande sensibilité de la spectroscopie de fluorescence aux réarrangements microstructuraux intervenant dans le matériau. Dans la seconde partie, la dépendance entre la contrainte appliquée au matériau et la longueur d’onde de fluorescence a permis a partir de modèles simples d’évaluer les contraintes internes qui se développent au cours d’une sollicitation cyclique. / Due to their diversity and their wide range of applications, polymers have emerged in our environment. For technical applications, these materials can be exposed to aggressive environment leading to an alteration of their properties. The effects of this degradation are linked to the concept of life duration, corresponding to the time required for a property to reach a threshold below which the material becomes unusable. Monitoring the ageing of polymer materials constitute a major challenge. Fluorescence spectroscopy is a technique able to provide accurate information concerning this issue. In this study, emphasis was placed on the use of fluorescence spectroscopy to study the phenomena involved in either the UV radiation or mechanical stresses of a polymer. In the case of high density polyethylene, the lack of intrinsic fluorescent signal leads to the use of a dye. This dye gives a fluorescent response depending on its microenvironment. All modifications in the macromolecular chain generate a shift of the fluorescent peak. This work can be dissociated in two major parts, on one hand the influence of UV aging on the fluorescent response and in another hand the influence of mechanical stresses. In the first part, complementary analyses like FTIR or DSC are used to correlate fluorescent results with known photo degradation mechanisms. The results show the great sensibility of the technique to the microstructural rearrangement in the polymer. In the second part, the dependence between the stress and the fluorescence emission gives opportunity to evaluate internal stresses in the material during cyclic solicitations.

Dissolved organic matter (DOM) is one of the largest carbon reservoirs on this planet and is present in aquatic environments as a highly complex mixture of organic compounds. The Florida coastal Everglades (FCE) is one of the largest wetlands in the world. DOM in this system is an important biogeochemical component as most of the nitrogen (N) and phosphorous (P) are in organic forms. Achieving a better understanding of DOM dynamics in large coastal wetlands is critical, and a particularly important issue in the context of Everglades restoration. In this work, the environmental dynamics of surface water DOM on spatial and temporal scales was investigated. In addition, photo- and bio-reactivity of this DOM was determined, surface-to-groundwater exchange of DOM was investigated, and the size distribution of freshwater DOM in Everglades was assessed. The data show that DOM dynamics in this ecosystem are controlled by both hydrological and ecological drivers and are clearly different on spatial scales and variable seasonally. The DOM reactivity data, modeled with a multi-pool first order degradation kinetics model, found that fluorescent DOM in FCE is generally photo-reactive and bio-refractory. Yet the sequential degradation proved a “priming effect” of sunlight on the bacterial uptake and reworking of this subtropical wetland DOM. Interestingly, specific PARAFAC components were found to have different photo- and bio-degradation rates, suggesting a highly heterogeneous nature of fluorophores associated with the DOM. Surface-to-groundwater exchange of DOM was observed in different regions of the system, and compositional differences were associated with source and photo-reactivity. Lastly, the high degree of heterogeneity of DOM associated fluorophores suggested based on the degradation studies was confirmed through the EEM-PARAFAC analysis of DOM along a molecular size continuum, suggesting that the fluorescence characteristics of DOM are highly controlled by different size fractions and as such can exhibit significant differences in reactivity.

京都大学 / 0048 / 新制・課程博士 / 博士(地球環境学) / 甲第18628号 / 地環博第123号 / 新制||地環||25(附属図書館) / 31528 / 京都大学大学院地球環境学舎環境マネジメント専攻 / (主査)教授 藤井 滋穂, 教授 梶井 克純, 准教授 田中 周平 / 学位規則第4条第1項該当 / Doctor of Global Environmental Studies / Kyoto University / DFAM

Polymer solar cells form a promising technology for converting sunlight into electricity, and have reached record efficiencies over 10% and lifetimes of several years. The performance of polymer solar cells depends strongly on the distribution of electron donor and acceptor materials in the active layer. To achieve longer lifetimes, degradation processes in the materials have to be understood. In this thesis, a set of complementary spectroscopy and microscopy techniques, among which soft X-ray techniques have been used to determine the morphology of polymer:fullerene based active layers. We have found that the morphology of TQ1:PC70BM films is strongly influenced by the processing solvent and the use of solvent additives. We have also found, by using soft X-ray techniques, that not only the light-absorbing polymer TQ1, but also the fullerene is susceptible to photo-degradation in air. Moreover, the fullerene degradation is accelerated in the presence of the polymer. Additionally, this thesis addresses the role of the interfacial layers for device performance and stability. The commonly used hole transport material PEDOT:PSS has the advantage of being solution processable at room temperature, but this layer is also known to contribute to the device degradation. We have found that low-temperature processed NiOx is a promising alternative to PEDOT:PSS, leading to improved device performance. Even for encapsulated polymer solar cells, some photo-induced degradation of the electrical performance is observed and is found to depend on the nature of the hole transport material. We found a better initial stability for solar cells with MoO3 hole transport layers than with PEDOT:PSS. In the pursuit of understanding the initial decrease in electrical performance of PEDOT:PSS-based devices, simulations were performed, from which a number of degradation sources could be excluded. / With the increasing global demand for energy, solar cells provide a clean method for converting the abundant sunlight to electricity. Polymer solar cells can be made from a large variety of light-harvesting and electrically conducting molecules and are inexpensive to produce. They have additional advantages, like their mechanical flexibility and low weight, which opens opportunities for novel applications. In order for polymer solar cells to be more competitive, however, both the power conversion efficiencies and lifetimes need to further improve. One way to achieve this is to optimize the morphology of the active layer. The active layer of a polymer solar cell consists of electron donating and electron accepting molecules whose distribution in the bulk of the film is a major factor that determines the solar cell performance. This thesis presents the use of complementary spectroscopy and microscopy methods to probe the local composition in the active layer of polymer solar cells. The stability of the active layer is studied and the interplay between the photo-degradation of the donor and acceptor molecules is investigated. Additionally, this thesis addresses how the interfacial layers between the active layer and the electrodes can influence device performance and stability. / <p>I publikationen felaktigt ISBN 978-91-7063-739-1</p>

Contaminants of emerging concern (CECs) are continuously being released into the environment mainly because of their incomplete removal in the sewage treatment plants (STPs). The CECs selected for the study include antibiotics (macrolides, sulfonamides and ciprofloxacin), sucralose (an artificial sweetener) and dioctyl sulfosuccinate (DOSS, chemical dispersant used in the Deepwater Horizon oil spill). After being discharged into waterways from STPs, photo degradation is a key factor in dictating the environmental fate of antibiotics and sucralose. Photodegradation efficiency depends on many factors such as pH of the matrix, matrix composition, light source and structure of the molecule. These factors exert either synergistic or antagonistic effects in the environment and thus experiments with isolated factors may not yield the same results as the natural environmental processes. Hence in the current study photodegradation of 13 CECs (antibiotics, sucralose and dicotyl sulfosuccinate) were evaluated using natural water matrices with varying composition (deionized water, fresh water and salt water) as well as radiation of different wavelengths (254 nm, 350 nm and simulated solar radiation) in order to mimic natural processes. As expected the contribution of each factor on the overall rate of photodegradation is contaminant specific, for example under similar conditions, the rate in natural waters compared to pure water was enhanced for antibiotics (2-11 fold), significantly reduced for sucralose (no degradation seen in natural waters) and similar in both media for DOSS. In general, it was observed that the studied compounds degraded faster at 254 nm, while when using a simulated sunlight radiation the rate of photolysis of DOSS increased and the rates for antibiotics decreased in comparison to the 350 nm radiation. The photo stability of the studied CECs followed the order sucralose > DOSS > macrolides > sulfonamides > ciprofloxacin and a positive relationship was observed between photo stability and their ubiquitous presence in natural aquatic matrices. An online LC-MS/MS method was developed and validated for sucralose and further applied to reclaimed waters (n =56) and drinking waters (n = 43) from South Florida. Sucralose was detected in reclaimed waters with concentrations reaching up to 18 µg/L. High frequency of detection (> 80%) in drinking waters indicate contamination of ground waters in South Florida by anthropogenic activity.