<p>This thesis describes the current status and novel aspects of the analysis of the molecules of life, i.e. peptides and proteins, using capillary electrophoresis (CE) coupled to mass spectrometry (MS) via (sheathless) electrospray ionization (ESI). Early reports of sheathless CE-ESI-MS were plagued by limited lifetimes of the electrospray emitter. In this thesis, two new approaches, the Black Dust and the Black Jack methods, utilizing polymer-embedded graphite instead of noble metals are presented. These emitters have shown improved long-term stability and proven excellent for sheathless electrospray operation. Failure of an emitter is often caused by electrochemical reactions occurring at the emitter-liquid interface. The electrochemical properties of the graphite coated emitters were therefore evaluated by classical electrochemical methods, such as cyclic voltammetry and chronoamperometry. The graphite coated emitters showed excellent electrochemical stability and properties compared to noble metal and polymer configurations.</p><p>Analyte-wall interactions have long been known to cause problems in the CE analysis of biomolecules. This can be circumvented by internal modification of the capillary walls. Additionally, it is of outermost importance to have a stable and sufficiently high electroosmotic flow (EOF) to sustain the electrospray, when using a sheathless approach. New monomer and polymer coatings are presented for rapid and high-efficient CE-ESI-MS separations of peptides and proteins.</p><p>Furthermore, the use of CE-ESI coupled to Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) shows great potential for rapid proteomic probing of human cerebrospinal fluid. The results are comparable with more established techniques, such as liquid chromatography and two-dimensional gel electrophoresis coupled to MS. However, the CE-ESI-FTICRMS analysis has significantly lower sample consumption and faster analysis time compared to the other techniques. The applications and use of CE-ESI-MS is expected to have a bright future with continued growth as current trends of multidimensional hyphenation and microfabricated devices are further developed and explored.</p>

This thesis describes the current status and novel aspects of the analysis of the molecules of life, i.e. peptides and proteins, using capillary electrophoresis (CE) coupled to mass spectrometry (MS) via (sheathless) electrospray ionization (ESI). Early reports of sheathless CE-ESI-MS were plagued by limited lifetimes of the electrospray emitter. In this thesis, two new approaches, the Black Dust and the Black Jack methods, utilizing polymer-embedded graphite instead of noble metals are presented. These emitters have shown improved long-term stability and proven excellent for sheathless electrospray operation. Failure of an emitter is often caused by electrochemical reactions occurring at the emitter-liquid interface. The electrochemical properties of the graphite coated emitters were therefore evaluated by classical electrochemical methods, such as cyclic voltammetry and chronoamperometry. The graphite coated emitters showed excellent electrochemical stability and properties compared to noble metal and polymer configurations. Analyte-wall interactions have long been known to cause problems in the CE analysis of biomolecules. This can be circumvented by internal modification of the capillary walls. Additionally, it is of outermost importance to have a stable and sufficiently high electroosmotic flow (EOF) to sustain the electrospray, when using a sheathless approach. New monomer and polymer coatings are presented for rapid and high-efficient CE-ESI-MS separations of peptides and proteins. Furthermore, the use of CE-ESI coupled to Fourier transform ion cyclotron resonance mass spectrometry (FTICRMS) shows great potential for rapid proteomic probing of human cerebrospinal fluid. The results are comparable with more established techniques, such as liquid chromatography and two-dimensional gel electrophoresis coupled to MS. However, the CE-ESI-FTICRMS analysis has significantly lower sample consumption and faster analysis time compared to the other techniques. The applications and use of CE-ESI-MS is expected to have a bright future with continued growth as current trends of multidimensional hyphenation and microfabricated devices are further developed and explored.

Introdução: Apesar dos avanços significativos no tratamento endovascular das doenças arteriais coronarianas e periféricas, a reestenose intra-stent continua sendo o principal limitante a médio prazo desses procedimentos. O mecanismo da reestenose intra-stent é principalmente a hiperplasia intimal, já que o stent impede a retração elástica aguda e resiste ao remodelamento geométrico negativo tardio. A hiperplasia intimal ocorre basicamente em resposta à formação de trombo local, à inflamação e às dissecções intimais e mediais secundárias à injúria causada pelo stent, sendo o grau de resposta intimal a base dos efeitos a longo prazo. O uso de stents com hastes menores e revestidos com drogas ou polímeros tem sido considerado uma nova alternativa para a prevenção da reestenose intra-stent. Objetivo: Analisar a resposta arterial ao implante de stent de cromo-cobalto sem e com revestimento de polímero Camouflage® em artérias carótidas de suínos, utilizando os seguintes parâmetros histológicos: grau de endotelização, conteúdo de células musculares lisas, grau de angiogênese, conteúdo de fibrina, grau de inflamação e injúria; além da análise histomorfométrica. Método: Stents balões-expansíveis de cromo-cobalto ( 8 stents CC Flex e 5 stents CC Flex Proactive) de 4 x 16 mm foram implantados em artérias carótidas comuns de oito suínos jovens, sendo um stent liberado em cada artéria. Após 30 dias, as artérias contendo os stents foram removidas, fixadas e coradas pelos métodos de hematoxilina/eosina e Verhoeff/Van Giesson. O segmento arterial contendo o stent foi dividido em 3 blocos distintos: proximal, médio e distal. Os cortes histológicos foram obtidos utilizando-se micrótomo de impacto (Polycut S, Leica, Alemanha) equipado com navalha de tungstênio de 16 cm, tipo D (Leica, Alemanha), com 5 ^m de espessura. A navalha de tungstênio mantém as hastes dos stents intactas nas secções transversas, minimizando os artefatos potenciais causados pela retirada dos stents. A avaliação foi realizada através de critérios histológicos e histomorfométricos. Resultados: Todos os stents foram implantados com sucesso e sem dificuldades técnicas. A análise histológica em 30 dias evidenciou alto grau de endotelização em todos os segmentos avaliados e leve à moderada infiltração de células musculares na íntima. Observou-se baixo grau de angiogênese em cerca de 50% dos segmentos avaliados e ausência completa de deposição de fibrina em pelo menos 80%, com distribuição semelhante entre os grupos. A resposta inflamatória e o grau de injúria causadas pelas hastes dos stents também foram discretas e similares entre os grupos e não houve correlação entre resposta inflamatória e injúria e desses parâmetros com a área de neoíntima. O grau de obstrução neo-intimal identificada neste período foi pequeno (15,1% +/- 8,38 CC Flex x 15,5%+/- 5,39 CC Flex ProActive) e estatisticamente não significativo entre os grupos (p=0,785). Conclusão: Os achados deste estudo experimental sugerem que o uso de stents de cromo-cobalto revestidos com polímero Camouflage® em artérias carótidas de suínos parece estar associado, pelo menos no curto prazo, a uma resposta histológica semelhante àquela encontrada após o implante de stents de cromo-cobalto não revestidos. Neste período não se observou uma menor hiperplasia intimal em virtude do revestimento de polímero. / Introduction: Despite all the advances in the endovascular treatment of coronary and peripheral artery diseases, in-stent restenosis is still the main limiting factor of these procedures in the medium and long-term. The mechanism of in-stent restenosis is mainly the intimal hyperplasia, as the stent prevents acute elastic recoil and later negative geometric arterial remodeling. Intimal hyperplasia occurs basically in response to the formation of local thrombus, inflammation and intimal and medial dissections secondary to the injury caused by the stent, with the degree of intimal response being the cause of long-term effects. Coating drug-eluting stents with polymers and drugs with thinner struts have been considered a new alternative for in-stent restenosis prevention. Objective: Analyse the arterial response to the cobalt-chromium stent implant with and without polymer coating Camouflage® in carotid arteries of pigs, using the following histological parameters: degree of endothelialization, smooth muscle cells (SMC) content, degree of angiogenesis, intimal fibrin content, degree of inflammation and injury; plus histomorphometric analysis. Method: Cobaltchromium balloon-expandable stents (8 CC Flex stents and 5 CC Flex Proactive), 4 x 16 mm, were deployed in common carotid arteries of 8 young pigs, with one stent being deployed in each artery. After 30 days, the arteries containing the stents were removed and underwent fixation and staining using the hematoxilin/eosin and Verhoeff /Van Giesson methods. The arterial segment containing the stent was divided into 3 distinct portions: proximal, middle and distal. The histological sections were obtained using impact microtome (Polycut S, Leica, Germany), equipped with a 16 cm, type D, 5 ^m thick tungsten knife (Leica, Germany). The tungsten knife maintains the stent shaft intact in cross sections, minimizing the potential artifacts caused by stent removal. The evaluation was carried out using histological and histomorfometric criteria. Results: All the stents were deployed with success and with no technical difficulties. The histological analysis performed after 30 days showed a high level of endothelialization in all the evaluated portions and mild to moderate infiltration of the SMC in the intima layer. A low level of angiogenesis of about 50% of the evaluated portions was observed and a complete absence of fibrin deposition in at least 80% of the portions, with similar distribution among the groups. The inflammatory response and the level of injury caused by the struts of the stents were also minimum and this was similar among the groups. There was no correlation between inflammatory response and injury and between the two latter parameters and the neo-intima area. The level of neo-intimal obstruction identified in this period was small (15,1% +/- 8,38 CC Flex x 15,5%+/- 5,39 CC Flex ProActive ) and no statistical significance between the groups (p=0,785). Conclusion: The findings of this experimental study suggest the use of balloonexpandable cobalt-chromium stents coated with polymer Camouflage® in carotid arteries of pigs seems to be associated, at least in the short-term, with a similar histological response to that found in the implantation of non-coated cobalt-chromium stents. In this period, a lower intimal hyperplasia was not observed with polymer coating stents.

Introdução: Apesar dos avanços significativos no tratamento endovascular das doenças arteriais coronarianas e periféricas, a reestenose intra-stent continua sendo o principal limitante a médio prazo desses procedimentos. O mecanismo da reestenose intra-stent é principalmente a hiperplasia intimal, já que o stent impede a retração elástica aguda e resiste ao remodelamento geométrico negativo tardio. A hiperplasia intimal ocorre basicamente em resposta à formação de trombo local, à inflamação e às dissecções intimais e mediais secundárias à injúria causada pelo stent, sendo o grau de resposta intimal a base dos efeitos a longo prazo. O uso de stents com hastes menores e revestidos com drogas ou polímeros tem sido considerado uma nova alternativa para a prevenção da reestenose intra-stent. Objetivo: Analisar a resposta arterial ao implante de stent de cromo-cobalto sem e com revestimento de polímero Camouflage® em artérias carótidas de suínos, utilizando os seguintes parâmetros histológicos: grau de endotelização, conteúdo de células musculares lisas, grau de angiogênese, conteúdo de fibrina, grau de inflamação e injúria; além da análise histomorfométrica. Método: Stents balões-expansíveis de cromo-cobalto ( 8 stents CC Flex e 5 stents CC Flex Proactive) de 4 x 16 mm foram implantados em artérias carótidas comuns de oito suínos jovens, sendo um stent liberado em cada artéria. Após 30 dias, as artérias contendo os stents foram removidas, fixadas e coradas pelos métodos de hematoxilina/eosina e Verhoeff/Van Giesson. O segmento arterial contendo o stent foi dividido em 3 blocos distintos: proximal, médio e distal. Os cortes histológicos foram obtidos utilizando-se micrótomo de impacto (Polycut S, Leica, Alemanha) equipado com navalha de tungstênio de 16 cm, tipo D (Leica, Alemanha), com 5 ^m de espessura. A navalha de tungstênio mantém as hastes dos stents intactas nas secções transversas, minimizando os artefatos potenciais causados pela retirada dos stents. A avaliação foi realizada através de critérios histológicos e histomorfométricos. Resultados: Todos os stents foram implantados com sucesso e sem dificuldades técnicas. A análise histológica em 30 dias evidenciou alto grau de endotelização em todos os segmentos avaliados e leve à moderada infiltração de células musculares na íntima. Observou-se baixo grau de angiogênese em cerca de 50% dos segmentos avaliados e ausência completa de deposição de fibrina em pelo menos 80%, com distribuição semelhante entre os grupos. A resposta inflamatória e o grau de injúria causadas pelas hastes dos stents também foram discretas e similares entre os grupos e não houve correlação entre resposta inflamatória e injúria e desses parâmetros com a área de neoíntima. O grau de obstrução neo-intimal identificada neste período foi pequeno (15,1% +/- 8,38 CC Flex x 15,5%+/- 5,39 CC Flex ProActive) e estatisticamente não significativo entre os grupos (p=0,785). Conclusão: Os achados deste estudo experimental sugerem que o uso de stents de cromo-cobalto revestidos com polímero Camouflage® em artérias carótidas de suínos parece estar associado, pelo menos no curto prazo, a uma resposta histológica semelhante àquela encontrada após o implante de stents de cromo-cobalto não revestidos. Neste período não se observou uma menor hiperplasia intimal em virtude do revestimento de polímero. / Introduction: Despite all the advances in the endovascular treatment of coronary and peripheral artery diseases, in-stent restenosis is still the main limiting factor of these procedures in the medium and long-term. The mechanism of in-stent restenosis is mainly the intimal hyperplasia, as the stent prevents acute elastic recoil and later negative geometric arterial remodeling. Intimal hyperplasia occurs basically in response to the formation of local thrombus, inflammation and intimal and medial dissections secondary to the injury caused by the stent, with the degree of intimal response being the cause of long-term effects. Coating drug-eluting stents with polymers and drugs with thinner struts have been considered a new alternative for in-stent restenosis prevention. Objective: Analyse the arterial response to the cobalt-chromium stent implant with and without polymer coating Camouflage® in carotid arteries of pigs, using the following histological parameters: degree of endothelialization, smooth muscle cells (SMC) content, degree of angiogenesis, intimal fibrin content, degree of inflammation and injury; plus histomorphometric analysis. Method: Cobaltchromium balloon-expandable stents (8 CC Flex stents and 5 CC Flex Proactive), 4 x 16 mm, were deployed in common carotid arteries of 8 young pigs, with one stent being deployed in each artery. After 30 days, the arteries containing the stents were removed and underwent fixation and staining using the hematoxilin/eosin and Verhoeff /Van Giesson methods. The arterial segment containing the stent was divided into 3 distinct portions: proximal, middle and distal. The histological sections were obtained using impact microtome (Polycut S, Leica, Germany), equipped with a 16 cm, type D, 5 ^m thick tungsten knife (Leica, Germany). The tungsten knife maintains the stent shaft intact in cross sections, minimizing the potential artifacts caused by stent removal. The evaluation was carried out using histological and histomorfometric criteria. Results: All the stents were deployed with success and with no technical difficulties. The histological analysis performed after 30 days showed a high level of endothelialization in all the evaluated portions and mild to moderate infiltration of the SMC in the intima layer. A low level of angiogenesis of about 50% of the evaluated portions was observed and a complete absence of fibrin deposition in at least 80% of the portions, with similar distribution among the groups. The inflammatory response and the level of injury caused by the struts of the stents were also minimum and this was similar among the groups. There was no correlation between inflammatory response and injury and between the two latter parameters and the neo-intima area. The level of neo-intimal obstruction identified in this period was small (15,1% +/- 8,38 CC Flex x 15,5%+/- 5,39 CC Flex ProActive ) and no statistical significance between the groups (p=0,785). Conclusion: The findings of this experimental study suggest the use of balloonexpandable cobalt-chromium stents coated with polymer Camouflage® in carotid arteries of pigs seems to be associated, at least in the short-term, with a similar histological response to that found in the implantation of non-coated cobalt-chromium stents. In this period, a lower intimal hyperplasia was not observed with polymer coating stents.

Nanoparticles (NPs) have considerable potential in targeted medicine. NPs can merge various functions and serve as labels for imaging or as nanocarriers in therapy. Modification of NPs with targeting ligands can lead to highly specific interactions with targeted cancer cells. However, the efficacy of targeting depends on the ratio between specific and non-specific interactions of a NP with the cell. Non-specific interactions of NPs are unrelated to targeted receptors and need to be eliminated in order to decrease background noise during imaging and adverse effect of drugs on healthy tissues. In this thesis, surface modifications of NPs were explored mainly on biocompatible carbon NPs called nanodiamonds (NDs), which have exceptional fluorescent properties such as long fluorescence lifetime, no photobleaching and photoblinking and sensitivity of their fluorescence to electric and magnetic field. Main issues addressed in this thesis are low colloidal stability of NDs in buffers and media, their non-specific interactions with proteins and cells and limited approaches for ND surface modifications. These issues were solved by coating NDs with a layer of biocompatible, hydrophilic, and electroneutral poly(ethylene glycol) or poly[N-(2- hydroxypropyl) methacrylamide] polymers. Optimized polymer coating...

The work deals with the preparation and mechanical properties of coated Bioglass® 45S5 based foam materials with open porosity. The samples have been fabricated applying the replication method with use of polyurethane foam. Furthermore, these samples were coated in order to increase the strength characteristics and crack resistance. Polyvinylalcohol and PVA with cellulose microfibrils have been used as coating. Besides microstructural parameters of investigated materials using the SEM images strength characteristics in compression and in tension were also quantified.

Les chromogranines (Cgs) sont une famille de protéines acides exprimées dans les granules des cellules neuroendocrines et immunitaires. Plusieurs peptides dérivés des Cgs présentent des activités antimicrobiennes. L’objectif de ma thèse est d’évaluer l’interaction hôte-pathogène et ensuite de développer un polymère antimicrobien avec insertion du peptide antimicrobien cateslytin (CTL).Dans une première partie, nous avons évalué l’aptitude de la leukotoxine LukE/D à induire la sécrétion des neutrophiles et rôle des protéases bactériennes à dégrader les peptides dérivés de la CgA. Les neutrophiles activés sécrètent de nombreux composés que nous avons identifiés. De plus, la dégradation des PAMs dérivés de la CgA par les protéases de S.aureus a été déterminée. Sur tous les PAMs testés, CTL est le seul qui tue S.aureus et résister à dégradation. Par ailleurs, CgA et CgB sont dégradés par la protéase Glu-C pour produire de nouveaux fragments sans activité antibactérienne, mais d’activité antifongique.Dans une deuxième partie, nous avons décidé de préparer un revêtement conjugué à CTL. CTL-C est utilisé pour préparer des films avec le dépôt alterné de CHI et HA-CTL-C. Par la suite nous avons synthétisé HAFITC-CTL-C and HAFITC pour analyser leur interaction. HAFITC-CTL-C est rapidement détectable dans le cytoplasme sans provoquer la lyse cellulaire. De plus, les films contenant CTL-C ne sont pas toxiques pour les fibroblastes gingivaux humains.En conclusion, CTL est le seul peptide antimicrobien dérivé de la CgA qui peut tuer S.aureus et résiste à la dégradation protéolytique, ce qui est de bon augure pour de nouvelles études visant à développer des biomatériaux antimcrobiens. / Chromogranins (Cgs) are a family of acidic proteins, expressed in secretory granules of neuro-endocrine and immune cells. Several Cgs derived peptides express antimicrobial activity. Current study was aimed to evaluate host-pathogen interaction and ultimately to develop antimicrobial polymer with insertion of cateslytine (CTL).In first part, stimulatory ability of leukotoxin LukE/D to induce neutrophils secretions and role of bacterial proteases to degrade CgA-derived AMPs was evaluated. Activated neutrophils secrete various components which were identified. Later by using antimicrobial assays, several fractions were found active and later discussed with respect to proteomic analysis. Additionally, degradation of CgA derived AMPs by S. aureus proteases was demonstrated. Out of various AMPs tested, CTL was only that can kill S. aureus and resist protease degradation. Furthermore, CgA and CgB are processed by Glu-C protease to produce new fragments lacking antibacterial activity but presenting antifungal activity.Secondly, we aimed to prepare CTL conjugated biomaterial coating. CTL-C was used to prepare PEM films with alternative deposition of CHI and HA-CTL-C and evaluated for antimicrobial activities. Later on, we synthesized HAFITC-CTL-C and HAFITC to analyze their interaction. HAFITC-CTL-C was readily detectable in cytoplasm without provoking cell lysis. Moreover CTL-C inserted PEM films are non-toxic to human gingival fibroblast cells.In conclusion, CTL is the only CgA-derived AMP that can kill S. aureus and resistant to proteolytic degradation, which is a promising feature for further studies in order to develop antimicrobial biomaterials.

Les limites des nanovecteurs commerciaux ou actuellement en développement ont motivé l’élaboration de nouvelles nanoparticules mésoporeuses de silice (MSNP), hybrides et multiphasées, pour le contrôle de la délivrance d’actifs à application théranostique. Ainsi, de nouvelles MSNP ont été conçues pour la pénétration intracellulaire (diamètre entre 30 et 60 nm, taille des pores de 2,8 nm). Afin de les rendre hémocompatibles et de contrôler la cinétique de délivrance de principes actifs encapsulés, ces MSNP ont été enrobées d’une bicouche lipidique (MSNP+@SLB-). La composition lipidique s’inspire des membranes asymétriques des globules rouges ciblés par la présente étude.La technologie MSNP+@SLB- ayant montré des limites avec une cinétique de libération trop élevée de la calcéine et trop lente de la rhodamine B, deux améliorations majeures ont été apportées :1- Le recouvrement des SLB par un nanogel d’alginate, permettant un excellent contrôle de la libération d’actifs.2- L’insertion de nanoparticules magnétiques dans le coeur des MSNP, déclenchant la libération de l’actif par hyperthermie.Ces nouvelles architectures de nanovecteurs permettent de moduler les cinétiques de délivrance d’actifs, renforçant et élargissant ainsi le champ d’applications des vecteurs silicés dans les domaines biomédical ( Voie orale et intraveineuse) et dermato-cosmétique (Voie topique). / The limitations of commercial nanovectors or currently under development have motivated the development of new hybrid and core shell mesoporous silica nanoparticles (MSNP) for the control of molecular delivery.Therefore, new MSNP were designed for intracellular penetration (diameter between 30 and 60 nm, pore size of 2.8 nm). In order to make them hemocompatible and to control the kinetics of delivery of encapsulated active ingredients, these MSNP were coated with a lipid bilayer (MSNP+@SLB-). The lipid composition is inspired by the asymmetric membranes of the red blood cells.Since the MSNP+@SLB- technology has shown some limitations associated to the release of payloads which can be too fast (in the case of calcein) or to slow (case of rhodamine B), two major improvements have been made:1- The coating of SLB by an alginate nanogel, allowing an excellent control of the release of active molecules.2- Insertion of magnetic nanoparticles in the MSNP core, triggering the release of the active ingredient by hyperthermia.These new nanovector architectures enable the fine tuning of active ingredient delivery kinetics, reinforcing and expanding the applications of silicated vectors in the fields of biomedicine (oral and intravenous) and dermato-cosmetics (topical).

AR-Glas wird in Form von Multifilamentgarn zur Verstärkung in textilbewehrtem Beton eingesetzt. Während des Herstellungsprozesses wird auf die AR-Glasfilamente die Schlichte aufgebracht, deren chemische Zusammensetzung maßgeblich die Qualität der Filament-Matrix-Grenzschicht bestimmt, sowie die chemische Beständigkeit im alkalischen Milieu gewährleistet. Zur Beurteilung der chemischen Beständigkeit in alkalischer Umgebung werden beschleunigte Alterungsversuche in wässrigen, alkalischen Lösungen durchgeführt. Die Reaktion von Hydroxid-Ionen mit dem Si-O-Si-Gruppen des Glasnetzwerkes führt zur Ausbildung hydratisierter Oberflächen und gelösten Silikaten. Das Ausmaß der Glaskorrosion ist von der chemischen Zusammensetzung der Glasfaser, der Schlichte bzw. Beschichtung und der alkalischen Lösung sowie von Zeit und Temperatur abhängig. Die beschleunigte Alterung von verschiedenen AR-Glasfasern in NaOH-Lösung sowie Zementlösung zeigt, dass sich der Korrosionsmechanismus aufgrund der vorhandenen Calcium-Ionen unterscheidet. Die Filamentbruchspannung wird anhand der Weibull-Verteilungsfunktion analysiert. Das mechanische Verhalten hängt deutlich von der chemischen Zusammensetzung der Alterungslösung ab, was zu unterschiedlichen Parametern der Weibull-Verteilungsfunktion sowie vermengten Verteilungen führen kann. Die Alterung in NaOH-Lösung führt zur Ausbildung einer korrodierten Schicht an der Filamentoberfläche. In Ca-haltigen Zementlösungen kommt es dagegen zu einer lokal begrenzten Korrosion. Für die Beurteilung verschiedener Polymerbeschichtungen werden Betonverbunde bei unterschiedlichen Temperaturen und Umgebungsfeuchten gelagert, wodurch geeignete Alterungsbedingungen evaluiert werden und den Vergleich der chemischen Beständigkeit unterschiedlicher Beschichtungen ermöglichen. / Rovings made of AR-glass are used in textile reinforced concrete. During the manufacturing process the sizing is applied on the AR-glass filaments. The chemical constitution of the sizing determines the quality of the filament-matrix-interface but also the chemical durability of the glass filaments in alkaline environment. The durability is evaluated by accelerated ageing tests in aqueous, alkaline solutions. In alkaline solutions, the reaction of hydroxyl ions with Si-O-Si-groups of the glass network leads to the formation of hydrated surfaces and dissolved silicate. The rate of this corrosion depends on the chemical constitution of the fibre and the alkaline solution as well as on time and temperature. The investigation of the ageing of glass fibres with different chemical constitutions in NaOH and cement solutions shows that the corrosion mechanism changes due to the inhibiting effect of calcium ions. The strength distributions have been evaluated using a Weibull distribution function. The mechanical behaviour strongly depends on the chemistry of the solution and determines the parameters of the Weibull distribution function in terms of either single or mixed distributions. The corrosion in NaOH solution leads to a strong dissolution of the outer layer of the glass fibres, whereas during aging in cement solution at the same pH-value a limited, local attack was revealed. The evaluation of polymer coatings is realised by the ageing of concrete composites at different temperatures and humidities to deduce adequate ageing conditions for the comparison of different coatings.

AR-Glas wird in Form von Multifilamentgarn zur Verstärkung in textilbewehrtem Beton eingesetzt. Während des Herstellungsprozesses wird auf die AR-Glasfilamente die Schlichte aufgebracht, deren chemische Zusammensetzung maßgeblich die Qualität der Filament-Matrix-Grenzschicht bestimmt, sowie die chemische Beständigkeit im alkalischen Milieu gewährleistet. Zur Beurteilung der chemischen Beständigkeit in alkalischer Umgebung werden beschleunigte Alterungsversuche in wässrigen, alkalischen Lösungen durchgeführt. Die Reaktion von Hydroxid-Ionen mit dem Si-O-Si-Gruppen des Glasnetzwerkes führt zur Ausbildung hydratisierter Oberflächen und gelösten Silikaten. Das Ausmaß der Glaskorrosion ist von der chemischen Zusammensetzung der Glasfaser, der Schlichte bzw. Beschichtung und der alkalischen Lösung sowie von Zeit und Temperatur abhängig. Die beschleunigte Alterung von verschiedenen AR-Glasfasern in NaOH-Lösung sowie Zementlösung zeigt, dass sich der Korrosionsmechanismus aufgrund der vorhandenen Calcium-Ionen unterscheidet. Die Filamentbruchspannung wird anhand der Weibull-Verteilungsfunktion analysiert. Das mechanische Verhalten hängt deutlich von der chemischen Zusammensetzung der Alterungslösung ab, was zu unterschiedlichen Parametern der Weibull-Verteilungsfunktion sowie vermengten Verteilungen führen kann. Die Alterung in NaOH-Lösung führt zur Ausbildung einer korrodierten Schicht an der Filamentoberfläche. In Ca-haltigen Zementlösungen kommt es dagegen zu einer lokal begrenzten Korrosion. Für die Beurteilung verschiedener Polymerbeschichtungen werden Betonverbunde bei unterschiedlichen Temperaturen und Umgebungsfeuchten gelagert, wodurch geeignete Alterungsbedingungen evaluiert werden und den Vergleich der chemischen Beständigkeit unterschiedlicher Beschichtungen ermöglichen. / Rovings made of AR-glass are used in textile reinforced concrete. During the manufacturing process the sizing is applied on the AR-glass filaments. The chemical constitution of the sizing determines the quality of the filament-matrix-interface but also the chemical durability of the glass filaments in alkaline environment. The durability is evaluated by accelerated ageing tests in aqueous, alkaline solutions. In alkaline solutions, the reaction of hydroxyl ions with Si-O-Si-groups of the glass network leads to the formation of hydrated surfaces and dissolved silicate. The rate of this corrosion depends on the chemical constitution of the fibre and the alkaline solution as well as on time and temperature. The investigation of the ageing of glass fibres with different chemical constitutions in NaOH and cement solutions shows that the corrosion mechanism changes due to the inhibiting effect of calcium ions. The strength distributions have been evaluated using a Weibull distribution function. The mechanical behaviour strongly depends on the chemistry of the solution and determines the parameters of the Weibull distribution function in terms of either single or mixed distributions. The corrosion in NaOH solution leads to a strong dissolution of the outer layer of the glass fibres, whereas during aging in cement solution at the same pH-value a limited, local attack was revealed. The evaluation of polymer coatings is realised by the ageing of concrete composites at different temperatures and humidities to deduce adequate ageing conditions for the comparison of different coatings.