This dissertation serves as a comprehensive, natural-abundance analysis of the present-day spatial and temporal dynamics and trophic linkages of nitrogen from within the Florida Keys National Marine Sanctuary (FKNMS). This work was accomplished by documenting the delta 15 N of particulate organic matter (POM), several genera of aquatic vegetation and herbivorous fish, as well as dissolved water column nitrogen. Seasonal and spatial variations in delta 15 N were assessed, trophic level variations among reef constituents were quantified, and relative contributions of both natural and anthropogenic nitrogen into the reef tract were determined. The measured mean delta 15 N of POM (3.64 per mil), aquatic vegetation (Dictyota = 2.39 per mil; Thalassia = 1.91 per mil; Rhizophora mangle = 1.46 per mil; Halimeda = 1.62 per mil; sponges = 4.13 per mil; turf algae = 2.67 per mil), herbivorous fish (4.92 to 8.47 per mil), as well as the delta 15 N and delta 18 O of nitrate (4.40 and 20.36 per mil, respectively) suggest that the primary nutrient sources directly impacting the reef are from natural sources, principally nitrogen fixation, and not anthropogenic wastes. Clear trophic linkages, without evidence of disturbances from anthropogenic wastes, are apparent in this study; herbivorous fishes show distinct 3 to 4 per mil enrichments over their food source. The presence of anthropogenic wastes was detected in the delta 15 N and delta 18 O of nitrate from Key Largo canal waters (10.09 per mil), however, sewage derived nutrients did not exist in any measurable or detectable amount outside the canals. Additionally, an assessment of the total yearly nitrogen contributions to the FKNMS was conducted, demonstrating that nitrogen fixation was the largest contributor of nitrogen to the ecosystem, delivering approximately 43 percent of all nitrogen. Anthropogenic wastes, however, contributed only about 8 percent to the total nitrogen budget, far less than biotic (non-human) wastes (13 percent), upwelling (10 percent), and gyre waters from the Gulf of Mexico (9 percent). For the first time, a long term, spatially diverse investigation has presented a more complete depiction of delta 15 N composition of various reef components found in the FKNMS, critical and imperative for accurately assessing nutrient pressures on coral reefs. As such, the data presented in this study do not support the theory that continuous anthropogenic nutrient loading from nearshore populations is the sole cause of reef decline in the FKNMS.

MERIS data and Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) ecosystem model coupled with the Princeton Ocean Model (POM), were used to investigate seasonal variations in surface chlorophyll distributions and their controlling factors to clarify phytoplankton dynamics in the upper Gulf of Thailand. Chlorophyll maps were produced by application on MERIS Level 2 data an empirical algorithm derived from the regression analysis of the relationship between chlorophyll-a concentration and remote sensing reflectance ratio. The results indicated that the patterns of seasonal chlorophyll distributions corresponded to local wind and water circulations. The model simulation highlighted the importance of river water as a significant nutrient source, and its movement after discharge into the sea is controlled by seasonal circulations. High chlorophyll concentration located along the western coast following the direction of counter-clockwise circulation, forced by the northeast winds, while chlorophyll accumulation was observed in the northeastern corner of the gulf due to clockwise circulation, driven by the southwest winds. These key simulated results are consistent with those of field observations and satellite images captured in the same periods of time, and also described seasonal shifting of blooming areas previously reported. Sensitivity analysis of simulated chlorophyll distributions suggested that not only nutrients but also wind-induced vertical movement plays a significant role in controlling phytoplankton growth. Plankton blooms occur in zones of upwelling or where vertical diffusivities are low. Increasing nutrients in the water column due to river loads leads to increasing potential for severe plankton blooms when other photosynthetic factors, such as water stability and light, are optimized. The knowledge of seasonal patterns of blooming can be used to construct environmental risk maps which are very useful for planning to mitigate the eutrophic problems. Effective measures need to be applied to control amount of nutrients released into natural water in order to minimize severity of red tides.

MERIS data and Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) ecosystem model coupled with the Princeton Ocean Model (POM), were used to investigate seasonal variations in surface chlorophyll distributions and their controlling factors to clarify phytoplankton dynamics in the upper Gulf of Thailand. Chlorophyll maps were produced by application on MERIS Level 2 data an empirical algorithm derived from the regression analysis of the relationship between chlorophyll-a concentration and remote sensing reflectance ratio. The results indicated that the patterns of seasonal chlorophyll distributions corresponded to local wind and water circulations. The model simulation highlighted the importance of river water as a significant nutrient source, and its movement after discharge into the sea is controlled by seasonal circulations. High chlorophyll concentration located along the western coast following the direction of counter-clockwise circulation, forced by the northeast winds, while chlorophyll accumulation was observed in the northeastern corner of the gulf due to clockwise circulation, driven by the southwest winds. These key simulated results are consistent with those of field observations and satellite images captured in the same periods of time, and also described seasonal shifting of blooming areas previously reported. Sensitivity analysis of simulated chlorophyll distributions suggested that not only nutrients but also wind-induced vertical movement plays a significant role in controlling phytoplankton growth. Plankton blooms occur in zones of upwelling or where vertical diffusivities are low. Increasing nutrients in the water column due to river loads leads to increasing potential for severe plankton blooms when other photosynthetic factors, such as water stability and light, are optimized. The knowledge of seasonal patterns of blooming can be used to construct environmental risk maps which are very useful for planning to mitigate the eutrophic problems. Effective measures need to be applied to control amount of nutrients released into natural water in order to minimize severity of red tides.

Made available in DSpace on 2016-12-08T17:19:16Z (GMT). No. of bitstreams: 1 Carlos Mauricio Sacchelli .pdf: 64226 bytes, checksum: 73274c8d6f55e4c10fb6577ed6dcd062 (MD5) Previous issue date: 2000-02-25 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este estudo é uma comparação entre os resultados obtidos pelo processo de injeção do copolímero poli (óxido de Metila) POM M90, produzido pelo Hoechst com os de simulação de injeção através do aplicativo Moldflow. Os experimentos foram realizados em dois moldes, um com três cavidades e outro com duas cavidades. A pressão de injeção, para ambos foi ajustada em um valor máximo e as válvulas de vazão totalmente abertas, assim, foi determinado o tempo mínimo de injeção (tm) para completar as cavidades. As pressões de injeção foram reduzidas e o processo de injeção foi interrompido no tempo tm. Como resultado, as cavidades não foram completamente preenchidas, sendo as massas dos corpos de prova injetados determinadas. Na simulação, as cavidades foram modeladas, e simuladas segundo normas do aplicativo, sendo os parâmetros de simulação utilizados iguais ao da injeção. As vazões de injeção na simulação foram determinadas em função da massa do injetado, de sua especifica e do tempo tm. A massa especifica foi obtida experimentalmente através do plastômetro de extrusão (aparelho utilizado para a determinação do índice de fluidez). Após as simulações, foram analisados os seguintes parâmetros de comparação: preenchimento das cavidades no tempo de referencia tm, massas do injetado e do simulado, as vazões simuladas e injetadas e a massa especifica do material. Como parâmetro simples de comparação entre estas técnicas foi utilizado a massa especifica do POM M90. Os resultados encontrados no método de obtenção da massa especifica foram coerentes indicando que o plastômetro de extrusão pode ser utilizado para este fim, os dados obtidos pela simulação de injeção indicaram que a mesma pode descrever com boa aproximação o processo de injeção do POM M90.

Les militaires français sont engagés depuis 2002 dans des opérations de lutte contre l’orpaillage illégal en Guyane. Malgré un programme de prévention du paludisme dimensionné et organisé, ces opérations se sont accompagnées d’une augmentation de l’incidence du paludisme. Cette thèse a pour objectif d’identifier les déterminants humains, vectoriels et parasitaires du paludisme en Guyane. La première partie de cette thèse permet de mieux décrire le faciès épidémiologique du paludisme en forêt guyanaise. Nous avons clairement établi le lien entre paludisme et orpaillage illégal. Une étude, menée en milieu orpailleur a démontré l’existence de foyers de paludisme hyperendémiques, avec une prédominance de P. falciparum et un risque d’émergence de résistance aux traitements combinés à base d’artémisinine. Les investigations entomologiques ont permis de confirmer le rôle d’Anopheles darlingi comme vecteur majeur du paludisme en forêt mais aussi l’existence d’une activité de piqûre diurne sous la canopée. Elles ont permis en outre de mieux identifier les autres vecteurs secondaires en forêt : An. nuneztovari et An. triannulatus, mais surtout An. ininii et An. marajoara. En seconde partie, une étude de cohorte en population militaire a permis d’estimer l’exposition au paludisme par l’utilisation d’outils sérologiques. La distribution des preuves sérologiques d’une infection palustre était en faveur d’une exposition plus fréquente à P. falciparum. Les taux d’incidence des infections étaient de 40 pour 100 personnes années que ce soit pour P. falciparum ou P. vivax. Le seul facteur protecteur était l’observance parfaite de la chimioprophylaxie par doxycycline. / Since 2002, French armed forces are involved in operations against illegal gold mining in French Guiana. Despite a properly dimensioned prevention program against malaria conducted, a drastic increase of malaria incidence has been observed among military personnel. The first part of this thesis aimed to describe the determinants of malaria in French Guiana forest, including human, vector and parasite features. We have established the link between malaria among military personnel and illegal gold mining sites. A study conducted among gold miners’ population has shown hyperendemic malaria foci in the rain forest, mainly due to P. falciparum, and highlighted a real risk for emergence of artemisinin resistance. Entomologic investigations supported that Anopheles darlingi is the main vector for malaria in rain forest. In addition, we have demonstrated the existence of daytime biting activity by An. darlingi in the forest, which might play a key role in malaria epidemic outbreaks among military personnel. Other sylvatic vectors were identified, as An. nuneztovari and An. triannulatus, but especially An. ininii and An. marajoara. The second part of the thesis, focused on a prospective cohort study conducted among French military population, highlighted real malaria exposure using serological tools. Serological evidences of Plasmodium infection (SEI) were more frequent for P. falciparum than P. vivax, in agreement with our findings in illegal gold miners’ population. SEI incidence rates were high, around 40 per 100 person-years for P. falciparum and P. vivax. Only complete compliance to malaria chemoprophylaxis using daily 100 mg doxycycline protected against malaria infection.

No description available.

Kyoto University (京都大学) / 0048 / 新制・課程博士 / 博士(工学) / 甲第15315号 / 工博第3194号 / 新制||工||1481(附属図書館) / 27793 / 京都大学大学院工学研究科都市環境工学専攻 / (主査)教授 角 哲也, 准教授 竹門 康弘, 准教授 武藤 裕則 / 学位規則第4条第1項該当

Plastics contribute 2 GTons to the global carbon footprint, today, several countries have set targets to achieve carbon neutrality. Plastics, being a major contributor to global carbon footprint, would need to be reduced significantly from our daily life to achieve that or a way needs to be devised to recycle them. A big bottleneck in this process is to reduce the consumption of thermosetting plastics or to reduce the emissions associated with plastic and move towards economical and environmentally safe plastics having a longer lifespan and efficient recyclability. Fused filament fabrication (FFF) is the most commonly used 3D printed technology available today. Its applications range from production of prototypes to hollow shafts, and fully functional commercial components. This technology is revolutionary in a sense that it offers advantages such as cheaper raw materials, high degree of customizability, production in smaller batches at lower costs, decrease in material wastage, rapid prototyping, and complex geometry. A number of thermoplastic polymers can be used with FFF technology to produce parts, in addition research is on going to print materials not commonly used for FFF process. Polyoxymethylene (POM) could be a viable option for utilization as FFF basestock for the production of tribologically functional components. POM is an engineering thermoplastic that offers high resistance to wear, low friction, excellent impact resistance, and good chemical resistance. These properties render it suitable for production of gear wheels and low load bearings. It is currently processed using traditional manufacturing methods such as injection and compression moulding, while its printability has received very little attention in the openly available literature. An attempt has been made in this thesis to fill up this research gap by providing insight into POM filament quality, and the thermal, mechanical, and tribological behaviour of POM printed parts. The influence of overfill and layer height on the bulk properties of the printed samples, its play with counterface surface roughness and applied load has also been investigated.

No description available.

No description available.