Utilization of renewable energy sources, as an approach to reduce greenhouse gas (GHG) emissions, have been globally popular in the last few decades. Among renewable energy sources, pressure retarded osmosis (PRO) has been scrutinized by scientists since the mid 70's. However, even today, the existing river-sea PRO systems can only marginally meet the generally approved criterion of 5 W/m2 power density, a threshold for an economically feasible PRO system. As an approach to increase the performance of PRO systems, multi-staging of PRO modules are investigated. A mathematical model of the scaled up PRO process is proposed with consideration for internal and external concentration polarization, reverse salt flux, and spatial variations along the membrane. A thermodynamic model is also developed with consideration for entropy generation and losses in the process. It predicts the percentile of each work loss source compared to the net work in the system. Several confi gurations of dual stage PRO system are presented and compared to single stage PRO. The comparison is based on three proposed target functions of power density (PD), specifi c energy (SE), and work per drawn freshwater (Wdrawn). Applied hydraulic pressures and flow rates of draw and feed solutions are optimized for maximizing the target functions. The results indicate that overall performance of the system could be improved by up to 8 % with a dual stage PRO in the case of SE. The system performance is not improved by depressurizing the draw solution before the second module in cases of SE and Wdrawn. The thermodynamic analysis demonstrate the contribution of each work loss and justify the reason of diminishing the net work over the losses. The effect of membrane area and membrane characteristics on the SE target function is also investigated. The distribution of membrane area in each module depends on the selected con figuration and inlet draw solution. In the dual stage systems, the SE value increases up to 14% by improving the membrane characteristics. Reducing the salt rejection coefficient (B) is the most e ective membrane characteristic in our con figurations. Replacing seawater with RO brine in draw solution results in a signifi cant improvement in SE values. / Graduate

Yes / This work presents a systematic evaluation of the membrane and process characteristics of a scaled-up pressure retarded osmosis (PRO). In order to meet pre-defined membrane economic viability ( ≥ 5 W/m2), different operating conditions and design parameters are studied with respect to the increase of the process scale, including the initial flow rates of the draw and feed solution, operating pressure, membrane permeability-selectivity, structural parameter, and the efficiency of the high-pressure pump (HP), energy recovery device (ERD) and hydro-turbine (HT). The numerical results indicate that the performance of the scaled-up PRO process is significantly dependent on the dimensionless flow rate. Furthermore, with the increase of the specific membrane scale, the accumulated solute leakage becomes important. The membrane to achieve the optimal performance moves to the low permeability in order to mitigate the reverse solute permeation. Additionally, the counter-current flow scheme is capable to increase the process performance with a higher permeable and less selectable membrane compared to the co-current flow scheme. Finally, the inefficiencies of the process components move the optimal APD occurring at a higher dimensionless flow rate to reduce the energy losses in the pressurization and at a higher specific membrane scale to increase energy generation.

In the shift towards a sustainable society, there have been varying interpretations of what this will mean for the social sphere. Using the parameters for social sustainability presented in the framework for strategic sustainable development (FSSD), this research sought to assist sustainability practitioners in identifying and eliminating the creation of or contribution to barriers that undermine the individual’s capacity to meet their needs. In doing so, the researchers explored the processes of social systems and employed a systems thinking perspective to examine how an organization could, through the intentional structuring of its processes, work to eliminate their contributions to arriers. From this research, characteristics of processes that move an organization towards socially sustainable development were identified as cooperation, transparency, openness, inclusiveness and involvement, around which a guidebook was developed to promote organizational reflection and examination of processes in regards to these characteristics and fundamental human needs. / This thesis aims to provide useful guidance for transforming organizational processes to better reflect a consideration of human needs. It seeks to address structures which act as barriers to the capacity of people to actualize their needs, and proposes a set of characteristics of processes that help to eliminate these barriers. / <p>andbenaim@yahoo.com.br - Andre Benaim acollins01@gmail.com - Amber C. Collins lraftis@gmail.com - Luke Raftis</p>

<p>Abstract</p><p>The aim of this thesis is to show the company the importance and the necessity of the maintenance, trough highlighting its role and impact on company’s profitability and competitiveness, and that’s happened within the analysing of the plant to figure out the failures and short stoppages, find out the causes behind them, convert them into money and the last step is to find out the most suitable and cost effective maintenance strategy based on some important factors such as economy, and quality to probably eliminate or reduce the number of failures and short stoppages. According to the analysis, capacity verifying data collection which the company has done during a random working daily shift and a technical faults list about the possibly failures and short stoppages which occur during the operation, it shows that there are some downtime due to management, operation and logistic, but the main focus was on the technical faults which has correlation with maintenance. In the result it shows which technical and mechanical problems the machines usually faces, the causes behind them, how much it cost the company when they breaks down and finally some suggestions and recommendations about how these problems can probably be solved based on economy and quality.</p> / <p>Sammanfattning</p><p>Syftet med denna rapport är att visa hur viktigt och nödvändigt det är med att underhålla företagens maskiner och utrustningar, därför att det har stor påverkan på företagens lönsamhet och konkurrens och det skedde genom att analysera företagens produktions process, lista ut haverier och avbrott, hitta orsakerna som ligger bakom det, konvertera det till pengar och försöka lösa problemen genom att hitta den mesta lämpligaste underhåll strategi baserande på ekonomi och kvalitet. Enligt analysen som utfördes genom studiet, kapacitet verifiering data insamlingen som företaget gjorde under en slumpmässig arbetsdag skift och ett tekniskt fel lisat på eventuella avbrott och haverier. Det visade sig att det finns vissa stopp tider som har samband med management, operation, och logistik, men uppgiften är mer fokuserad på de tekniska problemen som har samband med underhåll. I resultatet ser man vilka tekniska och mekaniska problem som brukar angripa maskinerna, orsakerna som ligger bakom de, hur mycket det kostar företaget för varje maskin när den är ur funktionen, samt några förslag på eventuella lösningar och rekommendationer baserande på ekonomi och kvalitet.</p>

The aim of this thesis is to show the company the importance and the necessity of the maintenance, trough highlighting its role and impact on company’s profitability and competitiveness, and that’s happened within the analysing of the plant to figure out the failures and short stoppages, find out the causes behind them, convert them into money and the last step is to find out the most suitable and cost effective maintenance strategy based on some important factors such as economy, and quality to probably eliminate or reduce the number of failures and short stoppages. According to the analysis, capacity verifying data collection which the company has done during a random working daily shift and a technical faults list about the possibly failures and short stoppages which occur during the operation, it shows that there are some downtime due to management, operation and logistic, but the main focus was on the technical faults which has correlation with maintenance. In the result it shows which technical and mechanical problems the machines usually faces, the causes behind them, how much it cost the company when they breaks down and finally some suggestions and recommendations about how these problems can probably be solved based on economy and quality. / Syftet med denna rapport är att visa hur viktigt och nödvändigt det är med att underhålla företagens maskiner och utrustningar, därför att det har stor påverkan på företagens lönsamhet och konkurrens och det skedde genom att analysera företagens produktions process, lista ut haverier och avbrott, hitta orsakerna som ligger bakom det, konvertera det till pengar och försöka lösa problemen genom att hitta den mesta lämpligaste underhåll strategi baserande på ekonomi och kvalitet. Enligt analysen som utfördes genom studiet, kapacitet verifiering data insamlingen som företaget gjorde under en slumpmässig arbetsdag skift och ett tekniskt fel lisat på eventuella avbrott och haverier. Det visade sig att det finns vissa stopp tider som har samband med management, operation, och logistik, men uppgiften är mer fokuserad på de tekniska problemen som har samband med underhåll. I resultatet ser man vilka tekniska och mekaniska problem som brukar angripa maskinerna, orsakerna som ligger bakom de, hur mycket det kostar företaget för varje maskin när den är ur funktionen, samt några förslag på eventuella lösningar och rekommendationer baserande på ekonomi och kvalitet.