Reaktion von Arginin mit Abbauprodukten 1,4-verknüpfter Disaccharide Im Verlauf der Reaktion von Arginin mit Abbauprodukten 1,4-glycosidisch verknüpfter Disaccharide entsteht ein Hauptderivatisierungsprodukt des Arginins, welches aus Inkubationsansätzen von Lactose mit N-(tert-Butoxycarbonyl)-L-arginin (Boc-Arg) bzw. N-a-Hippuryl-L-arginin (Hip-Arg) isoliert und als N-d-[5-(3-Hydroxypropyl)-4-oxo-imidazolon-2-yl]-L-ornithin (PIO) identifiziert werden konnte. PIO stellt ein spezifisches Reaktionsprodukt von Arginin mit Abbauprodukten 1,4-glycosidisch verknüpfter Disaccharide dar. Zum Nachweis des Precursors von PIO wurden die Bildung und der Abbau von 1,2-Dicarbonylverbindungen in Inkubationsansätzen von Lactose mit und ohne Hip-Arg nach der Hitzebehandlung mit o-Phenylendiamin untersucht. Es zeigte sich, dass ein als 1,2-Dicarbonylverbindung identifiziertes Abbauprodukt von Lactose nur in Abwesenheit von der Aminokomponente (Hip-Arg) als Hauptabbauprodukt bestimmbar war. Nach Isolierung dieser 1,2-Dicarbonylverbindung in Form ihres stabilen Chinoxalin-Derivates und der Strukturaufklärung ist es gelungen, dieses Hauptabbauprodukt der Lactose als (3'-Hydroxypropyl)-chinoxalin also das Chinoxalin der 3,4-Didesoxypentosulose (3,4-DDPs) zu identifizieren. Bestimmung von 1,2-Dicarbonylverbindungen in Lebensmitteln Glyoxal (GO), Methylglyoxal (MGO), 3-Desoxyglucosulose (3-DG) und 3-Desoxypentosulose (3-DPs) konnten nach Umsetzung mit o-Phenylendiamin erstmals in Milch- und Milchprodukten quantifiziert werden. Für Glyoxal wurden Gehalte von 0,06 bis 3,5 mg/ l und für Methylglyoxal von 0,2 bis 4,7 mg/ l bestimmt. 3-Desoxyglucosulose wurde mit Gehalten von 0,7 bis 3,5 mg/ l und 3-Desoxypentosulose von 0,1 bis 4,7 mg/ l bestimmt. Des Weiteren erfolgte die Bestimmung von Glyoxal, Methylglyoxal und 3-Desoxyglucosulose in käuflich erworbenen deutschen Honigen, in Honigen des Imkerverbandes Dresden und in neuseeländischen Honigen. Im Vergleich zu den Milchprodukten wurden deutlich höhere Gesamtgehalte an 1,2-Dicarbonylverbindungen (124 bis 1550 mg/ kg) bestimmt. Für 3-Desoxyglucosulose wurden 119 bis 1451 mg/ kg, für Glyoxal 0,2 bis 4,6 mg/ kg und für Methylglyoxal 0,5 bis 743 mg/ kg ermittelt. Ein Zusammenhang zwischen hohen Gehalten an 1,2-Dicarbonylverbindungen und der antibakteriellen Aktivität der Honige wurde untersucht. Hier stellten die neuseeländischen Manuka-Honige (Manuka: Leptospermum scoparium, Teebaum) den Schwerpunkt der Untersuchung dar. Für die untersuchten Manuka-Honige konnten ungewöhnlich hohe Gehalte an Methylglyoxal bestimmt werden (von 347 bis 743 mg/ kg). Von 12 verschiedenen Honigen deutscher und neuseeländischer Herkunft konnten nur Manuka-Honige als antibakteriell wirksam eingestuft werden. Bezogen auf den Gehalt an Methylglyoxal liegen die MIC-Werte für Staphylococcus aureus bei 1,5 mmol/ l für Manuka-Honig (35 % v/v), 1,4 mmol/ l für Manuka-Honig "active" (30 % v/v), 1,1 mmol/ l für Manuka-Honig UMF 10+ (25 % v/v) bzw. 1,8 mmol/ l für Manuka-Honig UMF 20+ (20 % v/v). Es zeigte sich, dass die antibakterielle Aktivität des Honigs unmittelbar auf den Methylglyoxal-Gehalt zurückführbar war.

Reaktion von Arginin mit Abbauprodukten 1,4-verknüpfter Disaccharide Im Verlauf der Reaktion von Arginin mit Abbauprodukten 1,4-glycosidisch verknüpfter Disaccharide entsteht ein Hauptderivatisierungsprodukt des Arginins, welches aus Inkubationsansätzen von Lactose mit N-(tert-Butoxycarbonyl)-L-arginin (Boc-Arg) bzw. N-a-Hippuryl-L-arginin (Hip-Arg) isoliert und als N-d-[5-(3-Hydroxypropyl)-4-oxo-imidazolon-2-yl]-L-ornithin (PIO) identifiziert werden konnte. PIO stellt ein spezifisches Reaktionsprodukt von Arginin mit Abbauprodukten 1,4-glycosidisch verknüpfter Disaccharide dar. Zum Nachweis des Precursors von PIO wurden die Bildung und der Abbau von 1,2-Dicarbonylverbindungen in Inkubationsansätzen von Lactose mit und ohne Hip-Arg nach der Hitzebehandlung mit o-Phenylendiamin untersucht. Es zeigte sich, dass ein als 1,2-Dicarbonylverbindung identifiziertes Abbauprodukt von Lactose nur in Abwesenheit von der Aminokomponente (Hip-Arg) als Hauptabbauprodukt bestimmbar war. Nach Isolierung dieser 1,2-Dicarbonylverbindung in Form ihres stabilen Chinoxalin-Derivates und der Strukturaufklärung ist es gelungen, dieses Hauptabbauprodukt der Lactose als (3'-Hydroxypropyl)-chinoxalin also das Chinoxalin der 3,4-Didesoxypentosulose (3,4-DDPs) zu identifizieren. Bestimmung von 1,2-Dicarbonylverbindungen in Lebensmitteln Glyoxal (GO), Methylglyoxal (MGO), 3-Desoxyglucosulose (3-DG) und 3-Desoxypentosulose (3-DPs) konnten nach Umsetzung mit o-Phenylendiamin erstmals in Milch- und Milchprodukten quantifiziert werden. Für Glyoxal wurden Gehalte von 0,06 bis 3,5 mg/ l und für Methylglyoxal von 0,2 bis 4,7 mg/ l bestimmt. 3-Desoxyglucosulose wurde mit Gehalten von 0,7 bis 3,5 mg/ l und 3-Desoxypentosulose von 0,1 bis 4,7 mg/ l bestimmt. Des Weiteren erfolgte die Bestimmung von Glyoxal, Methylglyoxal und 3-Desoxyglucosulose in käuflich erworbenen deutschen Honigen, in Honigen des Imkerverbandes Dresden und in neuseeländischen Honigen. Im Vergleich zu den Milchprodukten wurden deutlich höhere Gesamtgehalte an 1,2-Dicarbonylverbindungen (124 bis 1550 mg/ kg) bestimmt. Für 3-Desoxyglucosulose wurden 119 bis 1451 mg/ kg, für Glyoxal 0,2 bis 4,6 mg/ kg und für Methylglyoxal 0,5 bis 743 mg/ kg ermittelt. Ein Zusammenhang zwischen hohen Gehalten an 1,2-Dicarbonylverbindungen und der antibakteriellen Aktivität der Honige wurde untersucht. Hier stellten die neuseeländischen Manuka-Honige (Manuka: Leptospermum scoparium, Teebaum) den Schwerpunkt der Untersuchung dar. Für die untersuchten Manuka-Honige konnten ungewöhnlich hohe Gehalte an Methylglyoxal bestimmt werden (von 347 bis 743 mg/ kg). Von 12 verschiedenen Honigen deutscher und neuseeländischer Herkunft konnten nur Manuka-Honige als antibakteriell wirksam eingestuft werden. Bezogen auf den Gehalt an Methylglyoxal liegen die MIC-Werte für Staphylococcus aureus bei 1,5 mmol/ l für Manuka-Honig (35 % v/v), 1,4 mmol/ l für Manuka-Honig "active" (30 % v/v), 1,1 mmol/ l für Manuka-Honig UMF 10+ (25 % v/v) bzw. 1,8 mmol/ l für Manuka-Honig UMF 20+ (20 % v/v). Es zeigte sich, dass die antibakterielle Aktivität des Honigs unmittelbar auf den Methylglyoxal-Gehalt zurückführbar war.

Applications of Hot Melt Extrusion (HME) in pharmaceuticals have become increasingly popular over the years but nonetheless a few obstacles still remain before wide scale implementation. In many instances these improvements are related to both processing and product performance. It is observed that HME process optimisation is majorly focused on the active pharmaceutical ingredient's (API) properties. Characterising polymeric properties for their suitability in HME should be equally studied since the impact of excipients on both product and process performance is just as vital. In this work, two well-established cellulose ester derivatives: Hydroxy Propyl Methyl Cellulose Acetate Succinate (HPMCAS) and Hydroxy Propyl Methyl Cellulose Phthalate (HPMCP) are studied for their HME suitability. Their thermal, thermodynamic, rheological, thermo-chemical and degradation kinetic properties were evaluated with model plasticisers and APIs. It was found the thermal properties of HPMCP are severely compromised whereas HPMCAS is more stable in the processing zone of 150 to 200 °C. Thermodynamic properties revealed that both polymers share an important solubility parameter range (20-30 MPa P1/2P) where the majority of plasticisers and BCS class II APIs lie. Thus, greater miscibility/solubility can be expected. Further, the processability of these two polymers investigated by rheometric measurements showed HPMCAS possesses better flow properties than HPMCP because HPMCP forms a weak network of chain interactions at a molecular level. However, adding plasticisers such as PEG and TEC the flow properties of HPMCP can be tailored. The study also showed that plasticisers have a major influence on thermo-chemical and kinetic properties of polymers. For instance, PEG reduced polymer degradation with reversal in kinetic parameters whereas blends of CA produced detrimental effects and increased polymer degradation with reduction in onset degradation temperatures. Further, both polymers are observed to be chemically reactive with the APIs containing free -OH, -SOR2RN- and -NH2 groups. Finally, these properties prove that suitability of HPMCP is highly debated for HME and demands great care in use while that of HPMCAS is relatively better than HPMCP in many instances.

Estrogen stimulation of the medial amygdala (MEA) of the brain promotes male rat mating behavior. However, selective stimulation of either of the estrogen receptor subtypes found in the MEA (ERα or ERβ) does not support mating behavior. We tested the hypothesis that dual stimulation of ERα and ERβ is required to activate estrogen-dependant neural circuits in the MEA responsible for mating by local treatment of MEA with a combination of selective estrogenic agonists: propyl pyrazole triol (PPT, an ERα agonist ) and diarylpropionitrile (DPN, an ERβ agonist) administered to castrated, DHT maintained male rats. Estradiol (E2) or cholesterol (Chol) MEA implants served as positive and negative controls respectively. The animals receiving a mixture of PPT and DPN into the MEA displayed higher levels of mating behavior than the Chol treated animals but lower levels of mating behavior than the E2 treated animals.

Marine invertebrates have been found to be a rich source of bioactive secondary metabolites. In order to search for bioactive compounds, we have studied the chemical constituents from the organic extracts of two Formosan soft corals, Sinularia Scabra and Lemnalia flava. This study had led to the isolation of eight natural compounds, including two new sesquiterpenoids, scabralin A (1) and scabralin B (2) along with two known compounds (3 and 4) from Sinularia scabra, and two new sesquiterpenoids, flavalin A (5) and flavalin B (6) along with three known compounds (4, 7 and 8) from Lemnalia flava. The structures of these compounds were established by the detailed spectral analysis (IR, MS, 1D, 2D NMR) and by comparison of the spectral data with the related known compounds. Lobohedleolide (9), with a great quantity in Lobophytum crassum, have also been modified to compounds 10−19 by chemical conversions with the corresponding reactants via EDC-coupling with an aid of HCl salt of DMAP to yield the related esters and amides.The cytotoxicity of compounds 1, 3−8 and 10¡V19 against the MCF-7 (human breast adenocarcinoma), WiDr (Human colon adenocarcinoma), Daoy (human medulloblastoma), Hep2 (human laryngeal carcinoma), Hep G2 (human liver carcinoma), CCRF-CEM (human T-cell acute lymphoblastic leukemia), and DLD-1 (human colon adenocarcinoma) tumor cell lines were determined. Compound 1 showed moderate activity against the growth of Daoy, Hep2, MCF-7, Hela and CCRF-CEM. Both 15 and 16 exhibited a moderate cytotoxicity against the growth of Hep G2, and compounds 10, 12¡V14, 17 and 18 showed a weak cytotoxicity of it. Compounds 10, 12 and 16¡V18 were found to exhibit moderate inhibition against the growth of CCRF-CEM. Compounds 10, 16 and 18 showed weak activity against the growth of DLD-1. Furthermore, compounds 10, 12 and 14-19 were found to show significant activity against the accumulation of the pro-inflammatory iNOS protein at 10 £gM.

Dendrimers are synthetic macromolecules with branches-upon-branches structures, nanoscale dimensions and a high density of surface groups. Presence of multiple cationic sites in dendrimers permits their efficient nucleic acid complexation and cellular internalization through endocytic pathways. PETIM dendrimers of are characterized by tertiary amine branch points, and ether linkages. A third generation PETIM dendrimer, G3(NH2)24, with nitrogen at the core and twenty four peripheral primary amines was synthesized through alternate Michael addition and reduction reactions. The ability of G3(NH2)24 to interact with DNA was ascertained by spectroscopic and bio-physical techniques. These studies established the formation of dendrimer-DNA, and complex formation was also shown to protect the plasmid DNA from nucleases. Toxicity studies in cell culture, as well as, in female Balb/c mice established the non-toxic properties of the dendrimer. G3(NH2)24 was able to mediate efficient transfection in mammalian cells and in vivo. Targeted delivery of small interfering RNA (siRNA) to hepatocytes, in order to combat hepatitis C virus (HCV) infection was undertaken to expand the scope of PETIM dendrimer based gene delivery. Functionalization of the dendrimer periphery with galactose units ensured preferential delivery to the liver through multivalent interactions with the asialoglycoprotein receptors on the liver cell surface. The delivery of siRNA to the perinuclear region, in close proximity to the HCV RNA replication site resulted in ~75% decrease in viral RNA levels in replicon containing cells, as well as, JFH-1 infectious virus systems. The dendrimer-siRNA complexes were preferentially delivered to mice liver and were active in vivo. Physico-chemical studies of the protonation pattern of PETIM dendrimer indicated that the protonation of the dendrimer amines proceeded in a shell-wise pattern from the periphery to the core. The primary amines of the dendrimer as well as the outer shell tertiary amines with pKa values ~7-10 were protonated at physiological pH and were cationic sites for nucleic acid condensation. The inner shell tertiary amines with a pKa of ~4-6 were protonated at endosomal pH and aided ‘endosomal escape’ due to the high buffering capacity of 3.5. Work described in the Thesis establish a new synthetic dendrimer vector, namely, the series of PETIM dendrimers, as a high value gene delivery vector, making in-roads towards pre-clinical and possible clinical trials in future studies.

Orientador: Yoshitaka Gushikem / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-12T16:49:45Z (GMT). No. of bitstreams: 1 Magosso_HericaAparecida_D.pdf: 835979 bytes, checksum: 2898b43a1168c04ffdef965b55b067fa (MD5) Previous issue date: 2008 / Resumo: Este trabalho reporta a preparação, caracterização e aplicação de novos polímeros íon-trocadores denominados cloreto de 3-n-propil (3-metilpiridínio) silsesquioxano e cloreto de 3-n-propil (4-metilpiridínio) silsesquioxano, obtidos a partir da incorporação de quantidades variáveis de grupos metilpiridínio aos materiais. Os polímeros obtidos se mostraram insolúveis nos solventes mais comuns, inclusive água, o que representou uma vantagem, já que permitiu sua utilização na forma em que foram preparados, sem a necessidade de suportá-los sobre nenhum substrato sólido para serem utilizados. Os espectros de RMN C e infravermelho mostraram que as sínteses foram bem sucedidas. Os resultados de análise termogravimétrica mostraram que os materiais estudados são termicamente estáveis até valores próximos a 500 K, o que representa uma característica interessante dos materiais, já que o processo de regeneração dos mesmos envolve secagem a 373 K sob vácuo. Os polímeros obtidos a partir da incorporação do grupo funcional 3-metilpiridínio, denominados Si3-PicCl-A e Si3-PicCl-B, os quais se diferem somente pela quantidade de grupo funcionais fixados, apresentaram capacidades de troca iônica iguais a 1,91 e 0,90 mmol L, respectivamente, enquanto aqueles obtidos pela incorporação do grupo funcional 4-metilpiridínio, denominados Si4-PicCl-A e Si4-PicCl-B, apresentaram capacidades de troca iônica iguais a 1,46 e 0,81 mmol L, respectivamente. Os polímeros Si3-PicCl-B e Si4-PicCl-B foram usados no processo de adsorção de íons cobre e zinco de solução etanólica e o polímero Si4-PicCl-A foi usado na adsorção de íons mercúrio, cádmio e zinco de solução aquosa. A metodologia de cálculo utilizada para se obter os parâmetros de ajuste das isotermas de adsorção foi baseada no modelo dos centros bidentados fixos. Os resultados de adsorção obtidos mostraram a viabilidade do uso dos polímeros como eficientes materiais adsorventes. O último polímero reportado neste trabalho, denominado Si3-PicCl-A, foi aplicado no desenvolvimento de um sensor amperométrico altamente sensível a nitrito. Os resultados obtidos mostraram a viabilidade da aplicação do material no desenvolvimento de um novo sensor para a aplicação proposta / Abstract: This work reports the preparation, characterization and applications of the new ion-exchanger polymers named 3-n-propyl(3-methylpyridinium) silsesquioxane chloride and 3-n-propyl(4-methyl pyridinium) silsesquioxane chloride prepared by the fixation of different amounts of methylpyridinium groups into the materials. The obtained materials were insoluble in the most common solvents, including water. This property was considered as an advantage since it allowed their use as prepared, without the necessity to be supported on the solid substract surface before using. The C NMR and infrared spectra showed that the syntheses were successfully. Thermogravimetric analysis showed that the obtained materials are thermally very stable up to 500 K, an important characteristic since their regeneration process, after using, includes drying the solid at temperature of 373 K under low pressure. The two obtained materials having as functional group the 3-methylpyridinium ion, named Si3-PicCl-A and Si3-PicCl-B, which differ each other just by the amount of functional groups immobilized, presented ion exchanger capacity equal to 1.91 e 0.90 mmol L, respectively, and those obtained having as functional group the 4-methylpyridinium ion, named Si4-PicCl-A and Si4-PicCl-B, presented ion exchanger capacity equal to 1.46 e 0.81 mmol L, respectively. The materials Si3-PicCl-B and Si4-PicCl-B were used in the adsorption process of copper and zinc ions from ethanol solution and the polymer Si4-PicCl-A was used in the adsorption process of mercury, cadmium and zinc ions from aqueous solution. The calculation methodology used to obtain the fit parameters of the adsorption isotherms was based on the model of fixed bidentate centers. The obtained adsorption results showed the viability of using the polymers as efficient adsorvent materials. The last polymer reported in this work, named Si3-PicCl-A, was applied in the development of a highly sensitive amperometric sensor for nitrite. The obtained results showed the viability of the application of the material in the development of a new sensor for the proposed application / Doutorado / Quimica Inorganica / Doutor em Ciências

No description available.

Made available in DSpace on 2017-07-20T12:37:38Z (GMT). No. of bitstreams: 1 Vagner dos Santos1.pdf: 3358133 bytes, checksum: 5d65fc2649ed2010f554ec6574971249 (MD5) Previous issue date: 2013-06-20 / Conselho Nacional de Desenvolvimento Científico e Tecnológico / This thesis describes the use of the chloride of 3-n-propyl-pyridinium-silsesquioxane polymer (SiPy+Cl-) as an efficient stabilizer for the synthesis of platinum nanoparticles (NPs-Pt). Transmission Electron Microscopy (TEM) and measurements of dynamic light scattering (DLS) showed good distribution of NPs-Pt (3-40 nm) in the cavities of the SiPy+Cl-. The nanohybrid (Pt-SiPy+Cl-) obtained was used as polycation in the preparation of thin films by the Layer-by-Layer (LbL) technique. In order to investigate the electrocatalytic properties, films were obtained by the alternated deposition of the polyanions poly-2,5-metoxipropiloxisulfonated-phenylenevinylene (PPV-SO3) and acid (polyvinylsulfonic) (PVS) with Pt-SiPy+Cl- polycation in the architectures (PPV/Pt-SiPy+Cl-)n, (Pt-SiPy+Cl-/PPV)n, (PVS/Pt-SiPy+Cl-)n and (Pt-SiPy+Cl-/PVS)n, respectively. The deposition of the films was monitored by UV-Vis spectroscopy, which showed a linear growth in each bilayer deposited. In addition, it was observed by UV-Vis spectra that the deposition sequence initiated by polyanions (PPV-SO3 or PVS) showed higher absorbance, indicating that the architectures (PPV/Pt-SiPy+Cl-)n and (PVS/Pt-SiPy+Cl-)n contain more species of NPs-Pt available on the surface of the films. The presence of polyelectrolytes in the films and the interaction between them were verified by Infrared spectroscopic (FTIR) and Raman. Electrochemical measurements for the detection of DA, with the LbL films from PVS e Pt-SiPy+Cl-, showed that the oxidation currents for the (PVS/Pt-SiPy+Cl-)3 in presence of its interferent the ascorbic acid (AA) were more intense, with a difference between the oxidation potential equal to 550 mV at pH 7. For the films containing PPV-SO3 and Pt-SiPy+Cl- it was found that the presence of PPV-SO3 is crucial to help the NPs-Pt in the process of electron transfer. The (PPV/Pt-SiPy+Cl-)3 LbL film detected simultaneously the DA and the interferents AA and uric acid (UA) (ΔE = 640 mV) with an oxidation potential difference of 90 mV higher than the observed with the (PVS/Pt-SiPy+Cl-)3 LbL film containing PVS (ΔE =550 mV). In addition, the better values of sensitivity (2,7 μmol L-1), detection limit (LD = 3,19 x 10-7 mol L-1), quantification limit ( LQ = 2,07 x 10-6 mol L-1) were observed in the studies with the LbL films (PPV/Pt-SiPy+Cl-)3 instead of PVS. In order to mimic a biological system, the LbL film (PPV/Pt-SiPy+Cl-)3 was selected to DA detection confined into liposomes from dipalmitoyl phosphatidylcholine (DPPC). This film provided a difference of oxidation potential of 350 mV of the encapsulated DA, in the presence of AA and UA interfering. In vitro measurements for the detection of DA in striatal rat brain were performed successfully with drop-coated film of polyelectrolyte PPV and Pt-SiPy+Cl-, immobilized on screen-printed carbon electrode. Besides this analyte, the architectures of LbL films (PPV/Pt-SiPy+Cl-)n and (Pt-SiPy+Cl-/PPV)n were used in the detection of H2O2 and glucose. After immobilization of glucose oxidase (GOx) on the surface of the films, the biosensor (PPV/Pt-SiPy+Cl-)6GOx exhibited sensitivity = 1.17 μmol L-1, LD = 27.4 μmol L-1, LQ = 91.4 μmol L-1 e app m k = 2.64 mmol L-1, values greater than more complex films reported in the literature, demonstrating the importance of NPsPt for these films. / Esta tese descreve o uso do polímero cloreto de 3-n-propil-piridínio-silsesquioxano (SiPy+Cl-) como um eficiente estabilizante para síntese de nanopartículas de platina (NPs-Pt). Imagens de Microscopia Eletrônica de Transmissão e medidas de espalhamento dinâmico de luz indicaram boa distribuição das NPs-Pt (3-40 nm) nas cavidades do SiPy+Cl-. O nanohíbrido Pt-SiPy+Cl- obtido foi utilizado como policátion na preparação de filmes finos pela técnica Layer-by-Layer (LbL). Para investigação das propriedades eletrocatalíticas das NPs-Pt incorporadas ao SiPy+Cl-, obteve-se filmes pela deposição alternada dos poliânions poli-2,5-metoxipropiloxi-sulfonado fenilenovinileno (PPV-SO3) e ácido-polivinilsulfônico (PVS) com o policátion Pt-SiPy+Cl-, nas arquiteturas (PPV/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PPV)n, (PVS/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PVS)n, respectivamente. A deposição nos filmes LbL foi monitorada por espectroscopia de absorção na região do UV-Vis, a qual revelou um crescimento linear dos filmes a cada bicamada depositada. Além disso, nos espectros UV-Vis foi constatado que a sequência de deposição iniciada pelos poliânions (PPV-SO3 ou PVS) apresentou maior absorbância, indicando que nas arquiteturas (PPV/Pt-SiPy+Cl-)n e (PVS/Pt-SiPy+Cl-)n há mais espécies disponíveis de NPs-Pt na superfície dos filmes. A presença dos polieletrólitos nos filmes e a interação entre estes foram constatadas por medidas espectroscópicas de infravermelho (FTIR) e Raman. Nas medidas eletroquímicas para detecção de DA, com os filmes formados por PVS e Pt-SiPy+Cl-, verificou-se que o (PVS/Pt-SiPy+Cl-)3 apresentou correntes de oxidação para a DA mais intensas em meio ao interferente ácido ascórbico (AA), com uma diferença entre os potenciais de oxidação igual a 550 mV, em pH 7. Nos filmes contendo PPV-SO3 e Pt-SiPy+Cl- verificou-se que a presença do PPV-SO3 é fundamental para auxiliar as NPs-Pt no processo de transferência de elétrons. O filme LbL (PPV/Pt-SiPy+Cl-)3 detectou simultaneamente a DA em meio aos interferentes AA e ácido úrico (AU) (ΔE = 640 mV), com uma diferença de potenciais de oxidação 90 mV maior do que a observada com o filme contendo PVS (550 mV). Além disto, melhores valores de sensibilidade (2,7 μmol L-1), limite de detecção (LD = 3,19 x 10-7 mol L-1) e limite de quantificação (LQ = 2,07 x 10-6 mol L-1) foram observados nos estudos com o filme LbL (PPV/Pt-SiPy+Cl-)3 em relação ao PVS. A fim de mimetizar um sistema biológico, escolheu-se o filme LbL (PPV/Pt-SiPy+Cl-)3 para detecção de DA confinada nos lipossomos de dipalmitoilfosfatidil colina (DPPC). Este filme possibilitou uma diferença de potencial de oxidação de 350 mV da DA encapsulada, na presença dos interferentes AA e AU. A partir desta constatação, medidas in vitro para a detecção de DA em estriados cerebrais de ratos foram realizadas com sucesso com o filme drop-coated dos polieletrólitos PPV e Pt-SiPy+Cl-, imobilizados sobre eletrodo de carbono impresso. Além deste analito, as arquiteturas dos filmes LbL (PPV/Pt-SiPy+Cl-)n e (Pt-SiPy+Cl-/PPV)n foram utilizadas na detecção de H2O2 e glicose. Após imobilização de glicose oxidase (GOx) na superfície dos filmes, o biossensor (PPV/Pt-SiPy+Cl-)6GOx exibiu sensibilidade = 1,17 μmol L-1, LD = 27,4 μmol L-1, LQ = 91,4 μmol L-1 e appmk = 2,64 mmol L-1, valores estes superiores a filmes mais complexos relatados na literatura, demonstrando a importância das NPsPt para estes filmes.

Fímbrias do tipo IV estão associadas a diversos fenótipos em bactérias gram-negativas, e o presente estudo consistiu na caracterização da fímbria Pil e investigação de seu papel na adesão bacteriana de isolados de EPEC atípica. Por PCR e RT-PCR foram investigadas a presença e a funcionalidade do operon Pil e os resultados demonstraram que este está sendo transcrito somente nos isolados BA558 e BA956. Os genes pilS e pilV foram clonados em vetor de expressão para obtenção das proteínas Pil recombinantes e produção de anticorpos policlonais. A análise qualitativa dos testes de inibição da adesão utilizando os soros anti-PilS e anti-PilV juntos demonstraram que o isolado BA558 apresentou mudança de fenótipo de adesão. Esses resultados nos permitem concluir que o operon Pil está funcional em BA558 e BA956, e a expressão da fímbria Pil nessas cepas não está relacionada à formação de biofilme e autoagregação, porém a proteína fimbrial PilS juntamente com a adesina PilV parecem exercer uma função acessória importante na interação de BA558 às células HEp-2. / Type IV fimbriae are associated with several phenotypes in gram-negative bacteria. The aim of this study was the characterization of the Pil fimbria and its role in the interaction of atypical EPEC isolates in bacterial adhesion. Using PCR and RT-PCR, we investigated the presence and functionality of the pil operon genes. The results showed that these genes are transcribed only in the BA558 and BA956 isolates. The pilS and pilV genes were cloned into an expression vector for recombinant proteins and polyclonal antibodies production. Qualitative analysis of the adherence inhibition assays using both rabbit sera changed to localized-like the phenotype of BA558 isolate adhesion. Together, these results allow us to conclude that the Pil operon is functional only in the BA558 and BA956 isolates and that the expression of Pil fimbriae in aEPEC is not related to biofilm formation and autoaggregation but, the fimbrial PilS protein together with PilV adhesin seem to play an important accessory function in the interaction between the BA558 and epithelial cells in vitro.