Den svenska regeringen satsar på småföretagande på landsbygden som omfattar bland annat gårdsbutiker och livsmedelsförädlande företag. Uppsatsen studerar denna bransch i Stockholms län och för att hitta de underliggande faktorerna till framgång används en kvalitativ studie. En serie intervjuer med Herrvik, Järna Mejeri, Nilssons Köttaffär och Saltå Kvarn bygger upp det empiriska innehållet och från dessa intervjuer studeras vilka strategival som gjorts inom respektive fokusområde. Med hjälp av produktklassificeringarna bekvämlighetsprodukter, preferensprodukter, shoppingprodukter och specialitetsprodukter dras slutsatser om företagens förmåga att hålla sig till sin målklassficering. Analysen visar att Saltå Kvarn, det företag som har vuxit sig störst, hör till klassificeringen preferensprodukter och har i princip optimal strategi över alla fokusområden. Enda avvikelsen är i marknadsföring. För alla företag utom Saltå Kvarn är målklassificeringen specialitetsprodukter och de fokusområden som konsekvent inte uppnår detta för företagen är produktstrategi och prisstrategi. Tolkningen är att företagens största problem är hur man skapar ett kundinflytande som kunderna är beredda att betala ett högre pris för. Detta är också nyckeln till framgång för dessa småföretag. Social inbäddning är enligt teorin en stark plattform för att lösa detta problem. / The Swedish government is investing on small entrepreneurship on the countryside involving farm shops and food refining businesses. The essay studies this line of business in the Stockholm region and a qualitative study is used to find the underlying variables of success. A series of interviews with Herrvik, Järna Mejeri, Nilssons Köttaffär and Saltå Kvarn build up the empirical content and studied from these interviews are what strategic choices have been made within respective focus area. By support from the product classifications comfort-, preference-, shopping- and specialty products conclusions are made about the companies' ability to stick to their goal classification. The analysis shows that Saltå Kvarn, the company that has grown largest, belongs in the classification preference products and holds practically optimal strategy over all focus areas. The only exception is in marketing. For all companies besides Saltå Kvarn the goal classification is specialty products and the focus areas that consistently do not achieve this for the companies are product- and pricing strategy. The interpretation of this is that the companies' greatest problem is how to create customer influence that the customers are prepared to pay a higher price for. This is also the key for success for these small entrepreneurs. Social inbeddedment is according to theory a strong platform for solving this problem.

The correlation between pulp properties and operating conditions in high consistency (HC) refiners at Holmen Paper AB were studied. Two types of HC refiners were investigated: the Andritz RTS refiner at the Hallstavik Mill and the Sprout-Bauer Twin 60 refiner at the Braviken Mill. The objective of the study was to clarify the relationship between the pulp properties and refining conditions such as electrical energy input, housing- and feed- pressure and plate wear in high consistency refining. The results of this project show that worn segments reduce the operating energy maximum input and the pulp and handsheet properties in negative aspects such as lower tensile- and tear index, and shorter average fibre length. Energy input is an important factor in the refining process and influence Canadian Standard Freeness and the tensile index as evident from the probability residuals. Housing pressure and feed pressure influence the pulp quality and should be adjusted in order to optimise the refining process, although the effect is not as great as for energy input or plate wear. The results of the study indicate that Braviken Mill is operating at its optimum for the parameters measured in this project. Hallstaviks goal, to avoid fibre shortening and to obtain better tensile index, can be reached by making slight changes in pressure condition.

When producing thermomechanical pulps (TMP), wood chips and fiber material are loaded mechanically in a disc-refiner to separate the fibers and to make them flexible. In the process, much of the energy supplied is transferred to the fiber material through cyclic compression, shear and friction processes. Therefore, compression and friction characteristics are needed in order to gain a better grasp of the forces acting during refining. To this end, in this thesis, the compressive and frictional behaviors of wood were investigated under simulated chip refining conditions (i.e., hot saturated steam, high strain rate compression, and high sliding speed). Two new, custom-designed, experimental setups were developed and used. The equipment used for compression testing was based on the split Hopkinson pressure bar (SHPB) technique and the friction tester was a pin-on-disc type of tribotester (wear rig). Both pieces of equipment allow a testing environment of hot saturated steam.   In the wood–steel friction investigation, the influence of the steam temperature (100-170°C) was of primary interest. The wood species chosen for the friction tests were spruce (Picea abies), pine (Pinus sylvestris, Pinus radiata), and birch (Betula verrucosa). When performing measurements in the lower-temperature region (100-130°C), the friction coefficients registered for the softwoods were generally low and surface properties such as lubrica­tion were suggested to have a great influence on the results; however, in the higher-tempera­ture region (~130 -170°C), the friction coefficients of all investigated wood species were probably determined by bulk properties to a much greater extent. When most of the wood extractives had been removed from the specimens, testing results revealed distinct peaks in friction at similar temperatures, as the internal friction of the different wood species are known to have their maxima at ~110–130°C. One suggested explanation of these friction peaks is that reduced lubrication enabled energy to dissipate into the bulk material, causing particularly high friction at the temperature at which internal damping of the material was greatest. During the friction measurements in the higher-temperature region, the specimens of the different wood species also started to lose fibers (i.e., produce wear debris) at different characteristic temperatures, as indicated by peaks in the coefficient of friction. In refining, the generally lower shives content of pine TMP than of spruce TMP could partly be explained by a lower wear initiation temperature in the pine species.   Wood stiffness is known to decrease with temperature, when measured at low strain rates. The results presented in this thesis can confirm a similar behavior for high strain rate compression. The compressive strain registered during impulsive loading (using a modified split Hopkinson equipment) increased with temperature; because strain rate also increased with temperature. Accordingly, the strain rates should determine the strain magnitudes also in a refiner, since the impulsive loads in a refiner are of similar type. Larger strains would thus be achieved when refining at high temperatures. The results achieved in the compression tests were also considered in relation to refining parameters such as plate clearance and refining intensity, parameters that could be discussed in light of the stress–strain relations derived from the high strain rate measurements. Trials recorded using high-speed photography demonstrated that the wood relaxation was very small in the investigated time frame ~6 ms. As well, in TMP refining the wood material has little time to relax, i.e., ~0.04–0.5 ms in a large single disc refiner. The results presented here are therefore more suitable for comparison with the impulsive loads arising in a refiner than are the results of any earlier study. It can therefore be concluded that the modified SHPB testing technique combined with high-speed photography is well suited for studying the dynamic behavior of wood under conditions like those prevalent in a TMP system.

Two methods for refining metallurgical grade silicon to solar grade silicon have been investigated. The first method involved the reduction of impurities from metallurgical grade silicon by high temperature vacuum refining. The concentrations of analyzed elements were reduced several times. The main steps in the second refining method include alloying with copper, solidification, grinding and heavy media separation. A metallographic study of the Si-Cu alloy showed the presence of only two microconstituents, mainly pure silicon dendrites and the Cu3Si intermetallic. SEM analysis showed a distinct boundary between the silicon and the Cu3Si phases, with a large concentration of microcracks along the boundary, which allowed for efficient separation. After alloying and grinding, a heavy media liquid was used to separate the light silicon phase from the heavier Cu3Si phase. Cu3Si residues together with the remaining impurities were found to be located at the surface of the pure silicon particles, and should be efficiently removed by acid leaching. Thirty elements were analyzed by the Inductively Coupled Plasma Mass Spectrometry (ICP) chemical analysis technique. ICP revealed a several times higher impurity level in the Cu3Si intermetallic than in the pure silicon; furthermore, the amounts of 22 elements in the refined silicon were reduced below the detection limit where the concentrations of 7 elements were below 1ppmw and 6 elements were below 2ppmw. The results showed that the suggested method is efficient in removing impurities from metallurgical grade silicon with great potential for further development.

Purification of metallurgical grade silicon (MG- Si) by a combination of solvent refining and physical separation has been studied. MG-Si was alloyed with iron and solidified under different cooling rates to grow pure Si dendrites from the alloy. The Si dendrites and FeSi2 that were formed after solidification were then separated by a gravity-based method. The separation method relies on significantly different densities of Si and FeSi2, and uses a heavy liquid with specific gravity between the two phases to float the former on the surface of a heavy liquid, while the latter sinks to the bottom. The effect of particle size and cooling rate on the Si yield and separation efficiency of the Si phase was investigated. The floated Si particles were further purified by removing the physically adherent Fe-Si phase, using an acid leaching method. Analysis of the produced silicon indicates that several impurity elements including P and B can be efficiently removed using this simple and low-cost technique.

Modern air battles are very dynamic and fast, and put extreme pressure on pilots. In some unpredictable situations, like new discovered threats or mission plan deviation because of enemy aircraft, the pilots might need to replan their predefined flight route. This is very difficult, if not impossible, to do since numerous factors affect it. A system that can help the pilots to do such a thing is needed. P revious work in this field has involved methods from artificial intelligence like A*-search. In this master thesis, implementation of a replanning system based on a control theory method, Model Predictive Control (MPC), is examined. Different factors influencing the path, such as terrain and threats, are included in the algorithm. The results presented in this thesis show that MPC solves the problem. As with every method there are some drawbacks and advantages, but as a summary the method is a very promising one and is worth further development. Proposals of future work and different improvements of the algorithms used here are presented in this report as well.

Purification of metallurgical grade silicon (MG- Si) by a combination of solvent refining and physical separation has been studied. MG-Si was alloyed with iron and solidified under different cooling rates to grow pure Si dendrites from the alloy. The Si dendrites and FeSi2 that were formed after solidification were then separated by a gravity-based method. The separation method relies on significantly different densities of Si and FeSi2, and uses a heavy liquid with specific gravity between the two phases to float the former on the surface of a heavy liquid, while the latter sinks to the bottom. The effect of particle size and cooling rate on the Si yield and separation efficiency of the Si phase was investigated. The floated Si particles were further purified by removing the physically adherent Fe-Si phase, using an acid leaching method. Analysis of the produced silicon indicates that several impurity elements including P and B can be efficiently removed using this simple and low-cost technique.

Two methods for refining metallurgical grade silicon to solar grade silicon have been investigated. The first method involved the reduction of impurities from metallurgical grade silicon by high temperature vacuum refining. The concentrations of analyzed elements were reduced several times. The main steps in the second refining method include alloying with copper, solidification, grinding and heavy media separation. A metallographic study of the Si-Cu alloy showed the presence of only two microconstituents, mainly pure silicon dendrites and the Cu3Si intermetallic. SEM analysis showed a distinct boundary between the silicon and the Cu3Si phases, with a large concentration of microcracks along the boundary, which allowed for efficient separation. After alloying and grinding, a heavy media liquid was used to separate the light silicon phase from the heavier Cu3Si phase. Cu3Si residues together with the remaining impurities were found to be located at the surface of the pure silicon particles, and should be efficiently removed by acid leaching. Thirty elements were analyzed by the Inductively Coupled Plasma Mass Spectrometry (ICP) chemical analysis technique. ICP revealed a several times higher impurity level in the Cu3Si intermetallic than in the pure silicon; furthermore, the amounts of 22 elements in the refined silicon were reduced below the detection limit where the concentrations of 7 elements were below 1ppmw and 6 elements were below 2ppmw. The results showed that the suggested method is efficient in removing impurities from metallurgical grade silicon with great potential for further development.

Thermomechanical pulping (TMP) is a highly energy intensive process where most of the energy is used in therefining of chips to fibres. Various ways of reducing the energy consumption have earlier been studied, for examplechange of refiner pattern, addition of various chemicals, and also some biochemical implementation in the form of fungus and enzymes. This study includes pre-trials with the enzymes pectin lyase and pectin esterase,multipectinase, xylanase, and mannanase. The results are studied via a reducing sugar assay, an enzymatic assayusing spectrophotometry, and capillary zone electrophoresis. The study also includes results from a pilot scalerefining with multipectinase, xylanase, and mannanase, performed with a wing refiner at Helsinki University.Reductions of energy consumption in TMP by pre-treatment of Norwegian spruce chips are investigated and apotential reduction of energy consumption of 6 % is indicated.

A new technique for measuring the water content of fiber is presented. Tritiated water is added to a pulp/water suspension whereupon the tritium partitions between the bulk water and the pulp. Through this technique a fiber:water partition coefficient is developed, Kpw. This thesis will cover the development of the Kpw procedure and three different case studies. The first study involves comparing Kpw to traditional methods of fiber water content. The procedure provides a value of ten percent for the tightly bound water content of unrefined hardwood or softwood kraft fiber, either bleached or unbleached. If this water is assumed to cover the fiber surface as a monolayer, then an estimate of the wet surface area of fiber can be obtained. This estimate compares well to independent measurements of surface area. Kpw has also been found to be valuable in furthering the understanding of refining. Based on the study, it is proposed that refining occurs in three discrete stages. First, refining removes the primary cell wall and S1 layer while beginning to swell the S2 layer. Next, internal delamination occurs within the S2 layer. Finally, fiber destruction occurs at high refining levels. By using Kpw, the three stages of refining are clearly recognized. Lastly, Kpw is used to study the effect of hornification on bleached softwood kraft fiber. The recycling effects at three refining levels were characterized by Kpw and followed closely the findings of the refining study. At low and high refining levels, the impact of recycling was minimal according to Kpw results, but at 400 mL csf the impact of recycling was much more pronounced. This could be attributed to the closing of internal delaminations within the fiber.