The reflectarray has been considered as a suitable candidate to replace the conventional parabolic reflectors because of its high-gain, low profile, and beam reconfiguration capability. Narrow bandwidth of the reflectarray is the main obstacle for the various uses of the reflectarray. The wide band element with a large phase variation range and a linear phase response is one of the solutions to increase the narrow bandwidth of the reflectarray. Several elements with a large phase range and a linear response have been developed, but their configurations are complex. Simple methods have been investigated in this dissertation to develop wide band elements. A microstrip ring and slot element with a large phase range is introduced and modified for a better linear response. A coupled element with a linear response has been developed. A method is proposed to design a two-layer reflectarray with multi-resonant elements of various sizes for wideband operation. The element dimensions are adjusted by Particle Swarm Optimization routine to achieve the appropriate phase distribution for a predetermined frequency band. In another approach to increase the operation bands, a six-band reflectarray has been developed. As a new application of a reflectarray, a rectifying reflectarray, which is composed of a rectenna and a reflectarray, is introduced in this dissertation. The reflectarray directs RF energy from its aperture to the rectenna located on the feed point of the reflectarray. This configuration eliminates complex feeding networks and design difficulties of the conventional rectenna array. A Double Sided Parallel Strip Line (DSPSL) is adapted for the feeding network of the Archimedean spiral antenna. The DSPSL operate very well to feed the Archimedean spiral antenna over the bandwidth. The research presented in this dissertation suggests useful techniques for wideband reflectarrays, wireless power transmission, and wideband antenna designs.

The design of reflectarray surface currents that satisfy both radiation and user-defined antenna feasibility constraints is addressed through a novel paradigm which takes advantage of the non-uniqueness of inverse source (IS) problems. To this end, the synthesis is formulated in the IS framework and its non-measurable solutions are employed as a design DoF. Thanks to the adopted framework, a closed-form expression for the design of reflectarray surface currents is derived which does not require any iterative local/global optimization procedure and which inherently satisfies both the radiation and the feasibility design constraints. The features and potentialities of the proposed strategy are assessed through selected numerical experiments dealing with different reflectarray aperture types/sizes and forbidden region definitions.

In recent years there has been a growing demand for reduced mass, small launch volume, and, at the same time, high-gain large-aperture antenna systems in modern space-borne applications. This dissertation introduces new techniques for dual-band reflectarray antennas to meet these requirements. A series of developments is presented to show the dual-band capability of the reflectarray. A novel microstrip ring structure has been developed to achieve circular polarization (CP). A C/Ka dual-band front-fed reflectarray antenna has been designed to demonstrate the dual-band circular polarized operation. The proposed ring structure provides many advantages of compact size, more freedom in the selection of element spacing, less blockage between circuit layers, and broader CP bandwidth as compared to the patches. An X/Ka dual-band offset-fed reflectarray is made of thin membranes, with their thickness equal to 0.0508 mm in both layers. Several degrading effects of thin substrates are discussed. To overcome these problems, a new configuration is developed by inserting empty spaces of the proper thickness below both the X and Ka band membranes. More than 50 % efficiencies are achieved at both frequency ranges, and the proposed scheme is expected to be a good candidate to meet the demand for future inflatable antenna systems. An X/Ka dual-band microstrip reflectarray with circular polarization has also been constructed using thin membranes and a Cassegrain offset-fed configuration. It is believed that this is the first Cassegrain reflectarray ever developed. This antenna has a 0.75-meter-diameter aperture and uses a metallic sub-reflector and angular-rotated annular ring elements. It achieved a measured 3 dB gain bandwidth of 700 MHz at Xband and 1.5 GHz at Ka-band, as well as a CP bandwidth (3 dB axial ratio) of more than 700 MHz at X-band and more than 2 GHz at Ka-band. The measured peak efficiencies are 49.8 % at X-band and 48. 2 % at Ka-band. In summary, this dissertation presents a series of new research developments to support the dual-band operation of the reflectarray antenna. The results of this work are currently being implemented onto a 3-meter reflectarray with inflatable structures at the Jet Propulsion Laboratory and are planned for other applications such as an 8-meter inflatable reflectarray in the near future.

This work presents the design, theory, and measurement of a phase-reconfigurable reflectarray (RA) element for beamforming applications enabled by fluidic networks and colloidal dispersions. The element is a linearly polarized microstrip patch antenna loaded with a Coaxial Stub Microfluidic Impedance Transformer (COSMIX). Specifically, adjusting the concentration of highly dielectric particulate in the dispersion provides localized permittivity manipulation within the COSMIX. This results in variable impedance load on the patch and ultimately continuous, low-loss phase control of a signal reflected from the patch. Different aspects of design, modeling, and measurement are discussed for a proof-of-concept prototype and three further iterations. Initial measurements with manual injections of materials into a fabricated proof-of-concept demonstrate up to 200 degrees of phase shift and a return loss of less than 1.2 dB at the operating frequency of 3 GHz. The next design iteration addresses fabrication challenges as well the general cumbersomeness of the proof-of-concept by replacing the static material delivery system with a dynamic closed-loop fluidic network. It also makes use of a design procedure to maximize the phase sensitivity. Measurements demonstrate progressive phase shifts through dilution of the system reservoir; however, the initial measurements with this system are not in line with simulated predictions. Investigations suggest the primary culprit to be inaccurate material data. The dielectric constant of the particulate (colloidal BSTO) was overrated and the loss tangent of the fluid medium (a silicone-based oil) was underrated. After accounting for these issues the measurement a second measurement with the system demonstrates 270 degrees of phase shift with return loss of 9 dB. The next design iteration examines a trade-off between phase sensitivity and reduced losses. The design also features modifications to the fluidic system to allow for layered fabrication in the GND plane as well integration with a 2-port coaxial measurement cell. Attempted measurements discover the fluidic system cannot flow the higher concentrations of nanoparticles necessary for phase shifting. A final design iteration addresses this challenge by expanding and repositioning inlets to the fluidic system. Free space reflection measurements with this element initially demonstrate phase shifting until a buildup of nanoparticles form within the COSMIX.

Reflectarrays that emulate paraboloidal main-reflectors, and hyperboloidal or ellipsoidal sub-reflectors, have undergone a great deal of development over the past two decades. More recently, research on the topic has concentrated on overcoming some remaining disadvantages, re-examining certain design issues, and extending reflectarray functionality. This thesis concerns itself with fixed-beam offset-fed single-layer main-reflectarrays and sub-reflectarrays comprised of square or rectangular variable size conducting elements. Both full-wave analyses and experiment are used in all the deliberations. In order to examine reflectarray operating mechanisms the thesis first describes a component-by-component technique whereby the role of the various reflectarray parts can be assessed by determining their individual and aggregate contributions to the reflectarray near- and far-fields. This technique is used to diagnose the fact that feed-image-lobes that appear at off-centre frequencies are caused not only by the groundplane as first thought, but by an imbalance in the complex currents on the patches and groundplane at such frequencies. The use of sub-wavelength elements is shown to suppress such unwanted lobes. The thesis then uses receive- and transmit-modes analysis to show that beam squint at off-centre frequencies, often not accounted for when stating the gain bandwidth of a reflectarray, is due to the shifting of the true focal points away from the geometrical one at these frequencies. It is demonstrated that a two-feed reflectarray arrangement is capable of eliminating beam squint, and that the use of smaller focal length to aperture size (F/D) ratios removes the grating lobes that can appear in such two-feed reflectarrays due to clustering of the aperture amplitude distribution. Finally, the thesis studies the effect of the reality that the angle of incidence of the feed fields on the various reflectarray elements is not the same for all elements, even though this is most often assumed when using element reflection phase versus element size databases in performing reflectarray designs. Careful full-wave analysis reveals that it is not only the dependence of element reflection phase on incidence angle that is important, but that the individual element pattern beamwidths change and distort as this angle increases. This is important not only from the point of view of the coupling of the feed fields to the elements, but also as far as the angular sector within which the reradiated fields are important. Thus sub-reflectarrays, whose radiation patterns are considerably wider than main-reflectors, are more susceptable to incidence angle effects. It is shown that the use of sub-wavelength elements in a reflectarray largely ensures its immunity to such effects.

No description available.

Le travail présenté dans ce mémoire de HDR porte sur le développement d'antennes millimétriques en bande W. Ces dernières succientent un regain d'intérêt suite à l'émergence des applications civiles en gamme millimétrique, notemment dans le domaine des radar. Concevoir de telles antennes, de type reflectarray, implique non seulement le développement d'outils de simulation/modélisation spécifiques mais aussi la mise en place de dispositifs de mesures adaptés. Le manuscrit s'articule autour de axes de recherche: - le premier chapitre présente les principaux résultats obtenus dans le cadre des antennes millimétriques pour radar embarqués, - le second chapitre décrit les études relatives aux réseaux réflecteurs et lentilles diélectriques, - le troisième chapitre est consacré à la métrologie des antennes avec la mise en place du système de mesure en bande millimétrique et l'étude d'une base compacte, - le quatrième et dernier chapitre est la synthèse des travaux menés entre 1996 et 2001 sur les structures planaires pour l'insertion de fonctions actives.

The reflectarray has been considered as a suitable candidate to replace the conventional parabolic reflectors because of its high-gain, low profile, and beam reconfiguration capability. Beam scanning capability and multi-band operation of the microstrip reflectarray have been main research topics in the reflectarray design. Narrow bandwidth of the reflectarray is the main obstacle for the various uses of the reflectarray. The wideband antenna element with a large phase variation range and a linear phase response is one of the solutions to increase the narrow bandwidth of the reflectarray. A four beam scanning reflectarray has been developed. It is the offset-fed microstrip reflectarray that has been developed to emulate a cylindrical reflector. Unlike other microstrip reflectarrays which integrates phase tuning devices such as RF MEMS switches and another phase shifters to the reflectarray elements and control the reflected phase, the beam scanning capability of the reflectarray is implemented by a phased array feed antenna. This method can reduce the complexity of the design of the beam switching reflectarray. A simple method has been investigated to develop multi-band elements in this dissertation. In approach to increase the coverage of the operation bands, a six-band reflectarray has been developed with two layers. Each layer covers three frequency bands. A Butler matrix is one of the useful beamforming networks for a phased array antenna. A Double-Sided Parallel-Strip Line (DSPSL) is adapted for the feeding network of eight array elements. The DSPSL operate very well to feed the microstrip antenna array over the bandwidth to reduce the sidelobe level and a high gain. In another topic of a Butler matrix, a dual-band Butler matrix has been proposed for multi-band applications. A modified Butler matrix is used to reduce a size and a sidelobe level. The bandwidth of the microstrip antenna is inherently small. A broadband circularly polarized microstrip antenna with dual-offset feedlines is introduced in this dissertation. Aperture-coupled feed method is used to feed the stacked patch antennas and a slotcoupled directional coupler is used for the circularly polarized operation. The research presented in this dissertation suggests useful techniques for a beam scanning microstrip reflectarray, phased array antenna, and wideband antenna designs in the modern wireless communication systems.

This thesis focuses on a type of antenna known as the reflectarray antenna. In particular, it looks at the design of an active reconfigurable reflectarray antenna, which has not received much attention in the reflectarray community. Potential applications include deployment as a high gain, reconfigurable antenna for communication links, and as a spatial power combiner. The reflectarray element is an aperture-coupled patch that accepts a linearly polarized wave, phase shifts and amplifies the guided-waves in the transmission lines, and then re-radiates an orthogonally polarized wave. Stability analysis of the element, experimental results of the designed phase shifter and simulation and experimental results of the element are presented. Fabrication details of a 48 element reflectarray and challenges faced during experimental characterization of the elements are also discussed. The two dimensional beamforming capability and amplifying nature of the array are successfully demonstrated and veri fied, indicating robustness to phase errors and oscillating elements.

This thesis focuses on a type of antenna known as the reflectarray antenna. In particular, it looks at the design of an active reconfigurable reflectarray antenna, which has not received much attention in the reflectarray community. Potential applications include deployment as a high gain, reconfigurable antenna for communication links, and as a spatial power combiner. The reflectarray element is an aperture-coupled patch that accepts a linearly polarized wave, phase shifts and amplifies the guided-waves in the transmission lines, and then re-radiates an orthogonally polarized wave. Stability analysis of the element, experimental results of the designed phase shifter and simulation and experimental results of the element are presented. Fabrication details of a 48 element reflectarray and challenges faced during experimental characterization of the elements are also discussed. The two dimensional beamforming capability and amplifying nature of the array are successfully demonstrated and veri fied, indicating robustness to phase errors and oscillating elements.