No description available.

This project investigates the viability of using reconditioned batteries, which have lost part of their original capacity while powering electric vehicles (EVs), to minimize the expenses of fast-charging infrastructures under the three charging scenarios where fast-charging mode is likely to be needed the most. The analysis is conducted for the Spanish scenario and considers the retail electricity tariff that best suits the requirements of a FCS. The economic analysis is performed on an annual basis and is tackled with an optimization algorithm, formulated as a mixed-integer linear programming problem and run on MATLAB. The expected lifetime of the ESS, being made of reused automotive cells, is estimated with a semi-empirical approach, using an iterative process and implemented in MATLAB. A sensitivity analysis is conducted on three input parameters that were identified to have a considerable impact on the system design and performance.   Overall, results show that with current figures energy storage integration in FCSs is viable as it effectively reduces the infrastructure expenses in all scenarios. Peak-shaving is identified as the main source of cost savings while demand shifting is not effective at all. The latter is further discussed in the sensitivity analysis and some considerations are elaborated. The most profitable scenario for storage integration is the case of a fast-charger located in a urban environment while, surprisingly, the lowest cost savings are obtained in the highway case. The sensitivity analysis illustrates the impact and effects that electricity prices and specific cost of both the power converter and the second-life batteries produce on the optimal system design. Moreover, charging demand profiles are deeply analyzed and their main implications highlighted.

The increasing number of vehicles in Colombian cities have resulted in alarmingly low quality of air, further resulting in increasing health issues. One potential solution to this issue could be a shift from ICEVs (internal combustion engine vehicles) to EVs (electric vehicles). However, EVs in Colombia are still very expensive, an issue that needs to be addressed in order for the EV market to increase enough to be able address the issue of low air quality in cities. One way of overcoming these cost barriers could be through implementation of a market for SLB (second life batteries), meaning that a battery retired from usage in EVs would be remanufactured, resold and reused in another application. Through SLB, the owner cost of EVs could potentially be decreased. SLB could also help improve the case for nondispatchable renewable energy sources by providing low cost BESS (battery energy storage solutions). Thus, SLB has the potential to facilitate sustainable transition within both the transport and the energy sector. This thesis aims to assess the potential of SLB in Colombia. This is done through a literature review where the current state of SLB is investigated, several interviews with potential stakeholders for a SLB market in Colombia, and a techno-economic assessment of four potential BESS applications in Colombia. The literature review provides with current knowledge and state of SLB in general. The interviews provide important insight to potential stakeholders’ view on SLB for the specific case of Colombia. The techno-economic assessment includes a sensitivity analysis aiming to provide insights in which factors, such as e.g. battery purchasing price or charging cost, that that gives rise to the largest impact on feasibility of SLB. Findings from the interviews shows a strong collective commitment from the interviewees to working towards cleaner air, resulting in high engagement and collaborative efforts between stakeholders for the SLB case. The main issue highlighted by stakeholders regards technoeconomic uncertainties of SLB. Findings from the techno-economic assessment indicates that SLB is viable for larger applications such as BESS at solar farms, but not for smaller applications such as backup power in residential buildings. However, SLB is not deemed to be a game changer for either application, and there are still many uncertainties regarding both technological and economic aspects that needs to be further investigated. The sensitivity analysis shows that the factors resulting in the highest impact on feasibility of SLB is battery SOH (state of health) at the beginning of SLB usage, and battery and repurposing cost. It will be hard to address both of these factors simultaneously due to a higher SOH would render higher battery prices, and vice versa. The findings from the thesis shows that SLB can facilitate sustainable transition within both the transport and energy sectors but is not to be considered a game changer for these sectors. However, even though SLB’s contribution to sustainable transition is not revolutionary, it is still necessary from a sustainability perspective. Given the environmental footprint of EV batteries and the amount of hazardous waste retired EV batteries will give rise to, circular economy must be pursued. / Det ökande antalet fordon i colombianska städer har resulterat i oroväckande låg luftkvalitet, vilket ytterligare resulterat i ökande hälsoproblem. En potentiell lösning på det problemet kan vara en övergång från ICEVs (förbränningsmotorfordon) till EV (elfordon). EVs i Colombia är fortfarande väldigt dyra, en fråga som måste adresseras för att EV-marknaden ska kunna öka tillräckligt för att kunna ge en inverkan på problemet med låg luftkvalitet i städer. Ett sätt att övervinna dessa kostnadshinder skulle kunna vara genom att implementera en marknad för SLB (second life-batterier), vilket innebär att ett batteri som bedömts inte längre uppfylla kraven för användning i EVs, och därmed byts ut, skulle kunna byggas om, säljas vidare och återanvändas i andra applikationer. Genom SLB kan ägarkostnaderna för EVs potentiellt sänkas. SLB skulle också kunna användas för att tillhandahålla billigare BESS (batterilagringslösningar) hos icke-reglerbara förnyelsebara kraftverk, såsom solkraftverk. Således har SLB potentialen att underlätta för hållbara förändringar inom både transportsektorn och energisektorn. Den här uppsatsen ämnar att utvärdera SLBs potential i Colombia. Detta görs genom en litteraturöversikt där det nuvarande tillståndet av SLBs undersöks, flera intervjuer med potentiella intressenter för en SLB-marknad i Colombia, och en tekno-ekonomisk bedömning av fyra potentiella BESS-applikationer i Colombia. Litteraturöversikten samlar aktuell kunskap och status inom SLB i allmänhet. Intervjuerna ger viktig insikt om potentiella intressenters syn på SLB för det specifika fallet i Colombia. Den tekno-ekonomiska bedömningen inkluderar en känslighetsanalys som syftar till att ge insikter i vilka faktorer, som t.ex. batteriets inköpspris eller laddningskostnad, som ger upphov till den största effekten på SLBs genomförbarhet. Resultat från intervjuerna visar ett starkt kollektivt engagemang från de intervjuade att arbeta mot renare luft, vilket resulterar i högt engagemang och samarbete mellan intressenterna. Det största problemet med SLB från intressenternas synpunkt berör tekno-ekonomiska osäkerheter. Resultat från den tekno-ekonomiska bedömningen indikerar att SLB är ekonomiskt försvarbart för större applikationer som BESS vid solkraftverk, men inte för mindre applikationer som t.ex. för reservenergi i bostadshus. SLB anses dock inte vara ett genombrott för användning vid någon av applikationerna, och det finns fortfarande många osäkerheter när det gäller både tekniska och ekonomiska aspekter som måste undersökas ytterligare. Känslighetsanalysen visar att de faktorer som resulterar i den högsta påverkan på genomförbarheten av SLB är batteriets SOH (hälsotillstånd) i början av SLB-användning och kostnaden för batteri och ombyggnad av batterier. Det kommer dock att vara svårt att hantera båda dessa faktorer samtidigt på grund av att högre SOH skulle ge högre batteripriser, och vice versa. Resultaten från uppsatsen visar att SLB kan underlätta för hållbara förändringar inom både transport- och energisektorerna, men att det inte ska betraktas som något fantastiskt genombrott för dessa sektorer. Även fast SLBs bidrag till hållbara förändringar är inte revolutionerande, är det fortfarande en nödvändig faktor ur ett hållbarhetsperspektiv. Med tanke på miljöavtrycket för EV-batterier och mängden av farligt avfall som EV-batterier kommer att ge upphov till då de inte längre är önskvärda, måste cirkulär ekonomi bedrivas i största möjliga mån.

The energy demand is steadily increasing, and the electricity sector is undergoing a severe change in this decade. The primary drivers, such as the need to decarbonize the power industry and megatrends for more distributed and renewable systems, are resulting in revolutionary changes in our lifestyle and industry. The power grid cannot be easily or quickly be upgraded, as investment decisions, construction approvals, and payback time are the main factors to consider. Therefore, new technology, energy storage, tariff reform, and new business models are rapidly changing and challenging the conventional industry. In recent times, industrial peak shaving application has sparked an increased interest in battery energy storage system (BESS).  This work investigated BESS’s potential from peak shaving and Time-of-use (TOU) applications for a Culture-house in Skellefteå. Available literature provides the knowledge of various BESS applications, tariff systems, and how battery degradation functions. The predicted electrical load demand of the culture-house for 2019 is obtained from a consultant company Incoord. The linear optimization was implemented in MATLAB using optimproblem function to perform peak shaving and time-of-use application for the Culture-hose BESS. A cost-optimal charging/discharging strategy was derived through an optimization algorithm by analyzing the culture-house electrical demand and Skellefteå Kraft billing system. The decisional variable decides when to charge/discharge the battery for minimum battery degradation and electricity purchase charges from the grid.   Techno-economic viability is analyzed from BESS investment cost, peak-power tariff, battery lifespan, and batter aging perspective. Results indicate that the current BESS price and peak-power tariff of Skellefteå Kraft are not suitable for peak shaving. Electricity bill saving is too low to consider TOU application due to high battery degradation. However, combining peak shaving & TOU does generate more profit annually due to additional savings from the electricity bill. However, including TOU also leads to higher battery degradation, making it not currently a viable application. A future scenario suggests a decrease in investment cost, resulting in a shorter payback period.  The case study also analyses the potential in the second-life battery, where they are purchased at 80 % State of Health (SoH) for peak shaving application. Second-life batteries are assumed to last until 70 % or 60 % before End of Life (EOL). The benefit-cost ratio indicates that second-life batteries are an attractive investment if batteries can perform until 60% end of life, it would be an excellent investment from an economic and sustainability perspective. Future work suggests integrating more BESS applications into the model to make BESS an economically viable project.

This master’s thesis aims to improve the circularity of the electric vehicle (EV) battery value chain, specifically focusing on sustainable waste management of Lithium-Ion Batteries (LIBs) in Europe, particularly Sweden. The research objectives include evaluating and proposing actionable recommendations to enhance circularity, addressing environmental impacts, and supporting the industry’s transition towards a sustainable business model aligned with the new European Union (EU) Battery Regulation, which aims to enhance recycling rates, reduce environmental impact, and secure the recovery of valuable materials. The key research questions addressed are: (1) What initiatives, technologies, or best practices are currently being developed to support circularity and sustainable waste management in the EV battery value chain? (2) How can the circularity of the EV battery value chain be enhanced, particularly in sustainable waste management for LIBs? (3) What environmental impacts, socio-economic opportunities, and challenges exist in a circular value chain in the EV battery industry? The methodology employed a mixed-methods approach, including a literature review and case study, stakeholder interviews, SWOT analysis and life cycle assessment (LCA) using Minviro LCA software to quantify and compare the environmental impacts of state-of-the-art industrial LIB recycling methods. Key findings indicate that several initiatives and technologies are being developed to support circularity, including advanced recycling technologies and second-life applications for batteries. Enhancing circularity requires regulatory support, technological advancements, and stakeholder collaborative efforts. The findings highlight significant potential for extending the lifecycle of EV batteries through re-use, re-purposing, and recycling strategies. The analysis reveals that advancements in recycling technologies and supportive regulatory frameworks can substantially reduce the environmental impact and improve LIB supply chain sustainability. Notably, the LCA results highlight that mechanical and hydrometallurgical recycling processes offer more favourable environmental outcomes than pyrometallurgical methods. Thus, it shows potential for lower environmental impact on greenhouse gas (GHG) emissions and resource depletion, alongside socio-economic opportunities like job creation and economic growth. However, challenges such as technological barriers, economic feasibility, regulatory compliance, and EV battery value chain complexities remain, and these must be addressed. The conclusions drawn from the findings recommend that a combination of regulatory support, technological innovation, and stakeholder collaboration is essential for improving the circularity of the EV battery value chain. The study recommends advancements in recycling technologies, developing efficient testing and certification processes for second-life batteries, and establishing clear regulatory frameworks to facilitate circular economy practices. These measures are crucial for supporting the industry’s shift towards a more sustainable and circular model, ultimately contributing to the EU’s climate neutrality goals by 2050.