Spelling suggestions: "subject:"site friction"" "subject:"sido friction""
1 |
Analysis of side friction impacts on urban roads : Case study Dar-es-SalaamChiguma, Masatu L. M. January 2007 (has links)
Side friction factors are defined as all those actions related to the activities taking place by the sides of the road and sometimes within the road, which interfere with the traffic flow on the travelled way. They include but not limited to pedestrians, bicycles, non-motorised vehicles, parked and stopping vehicles. These factors are normally very frequent in densely populated areas in developing countries, while they are random and sparse in developed countries making it of less interest for research and consequently there is comparatively little literature about them. The objective of this thesis is to analyze the effect of these factors on traffic performance measures on urban roads. To carry out this work, a research design was formulated including specific methods and prescribed limitations. An empirical case study methodology was adopted where Dar-es-salaam city in Tanzania was chosen as a representative case. The scope was limited to include only road-link facilities. A sample of these facilities including two-lane two-way and four-lane two-way roads were selected and studied. The study was conducted in two parts, of which each involved a distinctive approach. Part one involved a macroscopic approach where traffic and friction data were collected and analyzed at an aggregated level, whereas part two involved a microscopic approach where data of individual frictional elements were collected and analysed individually. Data collection was mainly performed by application of video method, which proved to be effective for simultaneous collection of traffic and side friction data. Data reduction was conducted chiefly by computer, using standard spreadsheet and statistical software packages, mainly SPSS and some computer macros. The analysis part was based on statistical methods, chiefly regression analysis. In the macroscopic approach, traffic and friction data from all sites were adjusted through a process called ‘normalization’, which enabled the data from the different sites to be merged, and consequently to obtain speed-flow curves for each road type. The individual friction factors through regression analysis were weighted and combined into one unit of measure of friction called "FRIC". The effect of "FRIC" on speed-flow curves was analyzed. The results showed significant impact on speed for both road types. Impact on capacity was identified on two-lane two-way roads while field data on four-lane two-way roads did not allow this. In the microanalysis approach, effect of individual side friction factors on speed was analyzed. The results showed that on two-lane two-way roads, all studied factors exhibited statistically significant impact on speed, while on four-lane two-way roads, only one factor showed the same. The results also identified impact values characteristic to the individual friction factors on some roads. Recommendations were made based on these results that highway capacity studies particularly in developing countries, should include the friction variable, though in the form suitable to their own particular circumstances. Further recommendations were made that these results should be applied to formulate management programs seeking to limit levels of side friction on high mobility urban arterial streets in order to improve traffic safety and operation efficiency. / <p>QC 20100701</p>
|
2 |
Speed characteristics of urban streets based on driver behaviour studies and simulationAronsson, Karin F. M. January 2006 (has links)
The objective of the study was to gain in-depth knowledge of speed relationships for urban streets. The speed characteristics were examined using a number of methods for data collection. Throughout the research, a special focus was placed on capturing the influence on driver speed of interactions with pedestrians, cyclists and other road users, called sidefriction events in this study. First, driver behaviour and travel time data was collected from field and driving simulator studies for a range of street types and traffic conditions. The collected data was used to calibrate a microscopic traffic simulation model. Production runs with this model were performed for various traffic conditions. Second, aggregated speed data was collected at the link level, i.e. the macro level, for three street types. In combination with street site variables, speed and flow data was analysed using multiple regression techniques with space mean speed as dependent variable. This analysis was also performed for average travel speed data produced by microscopic traffic simulation. Two central results were attained and utilized for the model development: - In-depth knowledge of which factors influence speed choice on urban street links with minor intersections, on a micro and macro level. - A comprehensive research methodology for study of speed characteristics on urban streets in which the knowledge gained at the micro and macro level was applied. Results from the micro study showed that Average number of crossing pedestrians and Traffic flow had significant impact on average travel speed (R2=0.91). Results from the macro study performed for three street types showed that Street function and Number of lanes also had a high degree of explanation (R2 close to 0.70). The variables Separated bicycle lane, Roadside parking permitted and Number of minor intersections per 1 km were significant for some of the street types modelled in the macro study. The variables Ratio of through vehicles and Gender of the driver were also investigated and were found not to influence space-mean speed. The macro study demonstrated that speed choice and driver behaviour were consistent for each street type investigated regardless of city type and population size. The speed-flow relationships of the micro model for an urban street type showed good agreement with the macro model for traffic flows in the upper range. In conclusion, the research effort showed that the included side-friction variables added explanatory value to the estimation of speed, and thus can enhance the knowledge of traffic impacts of different urban street designs. / QC 20100630
|
3 |
Optimalizace vybraných návrhových prvků ČSN pro projektování pozemních komunikací / Selected ČSN Road Design Elements OptimizationStránský, Jakub January 2015 (has links)
The master‘s thesis focuses on the optimization of the design values of curves of the horizontal alignments of the roads. It deals with the comparison of values between czech and foreign standards and differences between them. The practical part examines the values of the real speeds of vehicles passing through the curves of various parameters that were measured during measurements of selected curves during 2014. From these data a new design values are derived that could be used for the design of horizontal alignments.
|
4 |
Influence of Pile Shape on Resistance to Lateral LoadingBustamante, Guillermo 01 December 2014 (has links) (PDF)
The lateral resistance of pile foundations has typically been based on the resistance of circular pipe piles. In addition, most instrumented lateral load tests and cases history have involved circular piles. However, piles used in engineering practice may also be non-circular cross-section piles such as square and H piles. Some researchers have theorized that the lateral resistance of square piles will be higher than that of circular piles (Reese and Van Impe, 2001; Briaud et al, 1983; Smith, 1987) for various reasons, but there is not test data to support this claims. To provide basic comparative performance data, lateral load tests were performed on piles with circular, square and H sections. To facilitate comparisons, all the tests piles were approximately 12 inches in width or diameter and were made of steel. The square and circular pipe sections had comparable moments of inertia; however, the H pile was loaded about the weak axis, as is often the case of piles supporting integral abutments, and had a much lower moment of inertia. The granular fill around the pile was compacted to approximately 95% of the standard Proctor maximum density and would be typical of fill for a bridge abutment. Lateral load was applied with a free-head condition at a height of 1 ft above the ground surface. To define the load-deflection response, load was applied incrementally to produce deflection increments of about 0.25 inches up to a maximum deflection of about 3 inches. Although the square and pipe pile sections had nearly the same moment of inertia, the square pile provided lateral resistance that was 20 to 30% higher for a given deflection. The lateral resistance of the H pile was smaller than the other two pile shapes but higher than what it is expected based on the moment of inertia. Back analysis with the computer program LPILE indicates that the pile shape was influencing the lateral resistance. Increasing the effective width to account for the shape effect as suggested by Reese and Van Impe (2001) was insufficient to account for the increased resistance. To provide agreement with the measured response, p-multipliers of 1.2 and 1.35 were required for the square pile and H piles, respectively. The analyses suggest that the increased resistance for the square and H pile sections was a result of increases in both the side shear and normal stress components of resistance. Using the back-calculated p-multipliers provided very good agreement between the measured and computed load-deflection curves and the bending moment versus depth curves.
|
5 |
Safety performance of curve advisory speed signsAvelar Moran, Raul Eduardo 25 May 2013 (has links)
Posting advisory speed signs at sharp horizontal curve sites is a practice well established in the United States. The purpose of these signs is to provide the driving public with a safe speed to negotiate such curves; however, the link between these signs and safety has not yet been clearly established.
The first manuscript in this dissertation presents an effort to model safety as it relates to curve advisory speed signs. It proposes a statistical model relating crash frequency at 2-lane rural highways in Oregon to curve advisory speed signs and other influential factors. The Advisory Speed Crash Factor (ASCF) emerges as a sub-model that characterizes the safety effect of advisory speed signs. Results indicate that safety may be compromised if the advisory speed is either excessively prohibitive or excessively permissive.
The second manuscript extends the use of the proposed ASCF to develop the OSU posting method, a new procedure that procures the "optimal" advisory speed derived from the ASCF. A field validation analysis, also presented in this manuscript, verified the meaningfulness of the proposed ASCF sub-model.
The third manuscript outlines another methodology, named 'the Hybrid OSU Posting Method' in an effort to mitigate the well documented variability associated with using the Ball Bank Indicator (BBI). This method determines the advisory speed using the BBI in combination with the ASCF. Though benefits in safety performance and consistency resulted from using the Hybrid OSU method, this method is still outperformed by the computational OSU method. / Graduation date: 2012 / Access restricted to the OSU Community at author's request from May 25, 2012 - May 25, 2013
|
Page generated in 0.0973 seconds