The subject of this thesis is to make production processes more efficient on the basis of material flow. In the theorical part are discribed the history of light production, construction and types of headlight and also optimalization tools. The practical part focuses on the using of optimization tools, especially the materiál flow simulations. By using this method is selected the ideal variant of the process which is decribed and evaluated.

This diploma thesis is aimed at radar cross section of passenger cars. Basic scattering parameters of simple targets are described. Some numeric methods used for computing radar cross section are discussed. CST Microwave Studio is used for simulation of passenger car with two different solvers. For the results there are plots of radar cross section of a car for 1 GHz, 24.125 GHz and 33 GHz. There is a plot of visualized hotspots.

Using Additive manufacturing it is possible to manufacture complicated components, that cannot be manufactured using conventional methods. The typical example is the lattice structure. Fabrication of these structures is complicated, and it is different from the fabrication of bulk parts. Using numerical simulation which can reflect process parameters it is possible to analyze the thermal behaviour of vertical and inclined struts fabrication. Results show that the diameter of struts influences weld track width. This influence is caused by preheating the powder material by previous scanning paths. The final geometry of inclined struts is made in more scanning layers. In this work influence of the start and endpoint of trajectory is described.

The content of this work is focused on the methods of multiple access for terrestrial radio network. These methods are exploited by the systems second and third generation of mobile networks. Specification the basic characteristics these methods is responsible part for inquest the correspondent specificities. Reason is that, that the wireless mobile communication it is possible split by three generation. First is NMT, with analog frequency modulation, which dont make use already, because has considerable disavantages . Analysis second generation mobile systems GSM leads to determination to many advanta- ges hereof system, who be based on methods FDMA, TDMA, CDMA. Description these methods is specialized on their spreading properties. Third generation of mobile systems UMTS is characterized wideband technology WCDMA, making use two duplex methods (FDD, TDD). Both methods provide higher efficiency of recovery frequency spectrum . All the theoretical approaches are examined in the last part of this work.it´s then possible after complete analysis these methods, make a design and a realization. In this event was used the computer programme Matlab–Simulink for simula- tion of duplex method WCDMA-FDD. Evaluation of this technology provides confrontation with second generation GSM .

This diploma thesis contains questions of simulation data transfer by ASM multicast. In simulation tool Opnet Modeler is proceed design of service IPTV. IPTV means television which is transfered in network by IP protocol. Data of IPTV service are sending by multicast transfer. Multicast is a technology which uses a group transfer. It is actually communication of a one source of data with many users. These users are receiving the same data. A main target of this technology is to decrement loading of source node and transference system in distribution of data towards group of users. Most often is multicast used in distribution of audiovisual data. Relation RTP/RTCP is simulated with a different numbers of users. Observed is interval of transmission of control RTCP packets. This will be reached by two methods which will be confront in the end. One is a theoretic calculation by course of a equation and second is a practical simulation in Opnet Modeler.

The aim of this Thesis is giving information about the network simulating system OMNeT++ and its extension INET framework and explore possible solution to implement missing protocol RIP. OMNeT++ is a discrete-event simulation environment. Source code is available and free for teaching and research purposes. Its primary application area is the simulation of communication networks, but because of its generic and flexible architecture, is successfully used in other areas like the simulation of complex IT systems, queueing networks or hardware architectures as well. The first part of Thesis decribes RIP protocol operations and conception of OMNeT++. At the second part of Thesis the implementation design and discussion of created modules and component is presented here. The final part of the Thesis was creating the laboratory problem on the basis experience gained. Implementation is realized in C++ programming language.

This thesis deals with the solar radiation, which is one of the potential sources of the renewable energy. The purpose of this thesis is to apprise of the methods how to calculate the Sun’s position as well as to learn the basics of software VEE Pro 8.0. Also, create a program simulating the location of the Sun during the day according to the variable latitudes and days and consequently to calculate the Sun irradiation passing through the atmosphere onto the tilted solar module, considering the respective tilt. Theoretical part describes the transmition of the energy between Sun and Earth, global irradiation and its components, which are generated by beams passing through the atmosphere and incident on a solar module. Practical part is dedicated to a program creation according the theoretical basis and it is used for further simulation of the Sun’s position. Another program simulates the total daily and annual irradiation including its components onto the tilted solar module, considering the respective tilt.

Fading channel is a communication channel that experiences different interference and fading due to multi-path signal propagation. The fading channel is designed by the finite impulse response filter with the time-varying impulse characteristic. The realisation of this filtr is based on the TDL (Tapped Delay Line) model, which simulate signal delay and signal attenuation in each branch. The aim of this thesis is to create the VHDL design of selected fading channel simulator and its description for hardware implementation into the FPGA.

This project deals with the design and implementation of the extensible programmable environment intended for the creation of various 3D simulations, specifically targeted for testing of the algorithms and creation of applications from the field of computer vision and robotics. Environment VISIMBOX was implemented in c# programming language and uses OpenGL as back-end for hardware accelerated rendering.

The aim of this work is to study and theoretically process existing movement options of station in OPNET Modeler environment. These options are described in first part. Furthermore to design and implement function to display path obtained from real-world conditions and done to station following this route during simulation. Coordinates used to move station are obtained by GPX format, which is used to store clearly the GPS coordinates. Second part is devoted to describing creation of this function, first using PHP script, then direct implementation into OPNET Modeler environment using C++.