Mykotoxine sind giftige Naturstoffe, die im Rahmen des Sekundärstoffwechsels von Schimmelpilzen beim Wachstum auf pflanzlichen Substraten gebildet werden. Zu den bekanntesten Mykotoxinen zählt das Ochratoxin A (OTA), welches überwiegend in Getreide und davon abgeleiteten Erzeugnissen, aber auch in Wein und Kaffee sowie Gewürzen und Bier nachgewiesen wurde. OTA ist unter anderem immunotoxisch, nephrotoxisch und besitzt teratogene sowie kanzerogene Eigenschaften. Darüber hinaus wird OTA eine hormonelle Wirkung zugesprochen. Aufgrund der Toxizität und des relativ häufigen Vorkommens in Lebensmitteln wurden für OTA Grenzwerte festgelegt. Diese liegen für Wein, Röstkaffee und diätetische Produkte zwischen 0,5 mikrogramm /kg und 10 mikrogramm /kg. Grenzwerte für Gewürze und Bier sind geplant. Im Rahmen der Methodenentwicklung zur Bestimmung von OTA in Lebensmitteln wurden verschiedene clean-up-Techniken miteinander verglichen. Dabei wurde vor allem den kombinierten Ionentauscher/reversed phase-Säulen und der LC-MS/MS wesentliche Bedeutung beigemessen. Innerhalb der Methodenvalidierung wurden die Ergebnisse mit dem entsprechenden Standardverfahren verglichen. Es konnte gezeigt werden, dass mit oben genanntem Material in Kombination mit der LC-MS/MS sehr gute Ergebnisse erzielt werden können. Diese wurden im Rahmen der Validierung durch statistische Auswertung bestätigt. Ferner wurden im Rahmen der Methodenentwicklung, speziell bei der Bestimmung von OTA in Kaffee, Extraktionstechniken miteinander verglichen. Dabei wurde die bislang kaum beachtete ASE (Accelerated Solvent Extraction, Dionex) sowie Ultraschallextraktion mit der Schüttelextraktion aus der gültigen Norm verglichen und ihre Anwendbarkeit auf weitere Lebensmittel geprüft. In diesem Zusammenhang waren die ASE und Ultraschallextraktion der konventionellen Schüttelextraktion überlegen. Darüber hinaus wurde die Ultraschallextraktion in Kombination mit dem Ionentauscher/reversed phase clean-up erfolgreich auf Weizen und Chili angewandt. Parallel zur Methodenentwicklung wurde die Stabilität und Homogenität von OTA in Wein und Röstkaffee untersucht. Sowohl die Homogenität als auch die Stabilität des Analyten sind wichtige Faktoren bei der Entwicklung neuer Verfahren, da zusammen mit Ergebnissen der Validierung, die Messunsicherheit innerhalb neuer Verfahren eingegrenzt werden. / Mycotoxins are naturally occurring toxic substances and produced as secondary metabolites by fungi which are growing on plants predominantly. One of the most interesting mycotoxins is ochratoxin A (OTA), which was found in several foods and feed stuff like wheat and its related products, wine, coffee, spices and beer. Among other things OTA is immunotoxic, nephrotoxic and has teratogenic and cancerogenic properties. Further more OTA shows hormonal effects. Because of its toxicity and common appearance in food and feed the OTA content had to be regulated in European and or national directives. The maximum values are determined between 0.5 micrograms/kg and 10 micrograms/kg for wine, roasted coffee and dietetic products. Other maximum levels for beer and spices are intended. During the investigation of analytical methods for the determination of OTA in food stuff different clean-up techniques were compared. Thereby the mixed anion exchange/reversed phase clean-up in combination with LC-MS/MS was researched intensively. Within method validation the results were compared with the corresponding standard methods. This work shows that the mixed mode clean-up in combination with LC-MS/MS gives excellent results. These results were statistically confirmed during method validation. Further more different extraction techniques were compared during the development of analytical methods, especially for the determination of OTA in coffee. Thereby the ASE (accelerated solvent extraction, Dionex) and the ultrasonic extraction were compared with the shaking technique from current standard methods. The adaptability for other food and feed products was researched as well. In this context the new extraction techniques were superior to conventional shaking techniques. In addition the ultrasonic extraction with mixed mode clean-up and LC-MS/MS detection was applied to chilli and wheat effectively. Besides the investigation of analytical methods the stability and homogeneity of OTA in wine and roasted coffee was researched. The homogeneity and stability of OTA in matrix are very important factors during the investigation of analytical methods. In combination with the relevant results of the method validation these results can be used to determine the uncertainty of the new analytical methods.

A contaminação de aguas pela mistura Benzeno, Tolueno, Etilbenzeno e Xilenos (BTEX) vem gerando a necessidade do desenvolvimento de metodologias altamente eficientes na remoção de poluentes e de metodologias analíticas para monitoramento ambiental suficientemente sensíveis, seletivos, reprodutíveis e rápidos. Nesse contexto, adsorventes com propriedades magnéticas aparecem como alternativas eficientes, de baixo custo e de fácil automação, inclusive possibilitando o desenvolvimento de metodologia analítica baseada na extração em fase sólida magnética (m-SPE), que vem ganhando interesse crescente por permitir extração rápida e análise efetiva dos poluentes com alta sensibilidade. A busca por adsorventes adequados exige o estudo de materiais com grande área superficial, funcionalizáveis e estáveis como as sílicas, mais especificamente uma comparação entre os tipos de sílica e do tipo de agente funcionalizante nas propriedades de adsorção/dessorção. Sílicas mesoporosas oraganofuncionalizas magnéticas com diferentes morfologias foram preparadas: sílica mesoporosa ordenada MCM-48 e MCM-41, bem como nanoparticulas esféricas de sílica mesoporosa (NPSiO2). A formação da silica mesoporosa ordenada começa com a preparação de um template de CTAB sobre o qual são depositados/formados os materiais MCM-41 e MCM-48. A concentração de CTAB deve ser controlada com cuidado pois estruturas com diferentes morfologias podem ser geradas variando-se esse parâmetro. As análises de espectroscopia FTIR, DRX e sorção de N2 revelaram que os materiais preparados são sílicas mesoporosas ordenadas com arranjo tipo giroide 3D (MCM-48) ou do tipo hexagonal (MCM-41) com área superficial respectivamente de 1212 m2.g-1 e 1159 m2.g-1. Além disso, as imagens de MET do material MCM-48 mostraram tamanho médio de partícula igual a 116 nm ± 15 nm. Para facilitar a remoção do adsorvente, nanopartículas de magnetita (SPION) foram incorporadas na superfície dos materiais adsorventes. O tempo de remoção típico foi determinado como sendo de 1 minuto. A organofuncionalização da sílica com octadecilssilano (C18), octilssilano (C8) e difenilssilano (Ph2) foi confirmada por espectroscopia FTIR e análise termogravimétrica demostrando a presença e a percentagem em massa dos grupos orgânicos em cada tipo de sílica mesoporosa. Usando como referência sílica gel 60 comercial (Sílica), foram comparadas as propriedades de adsorção frente a BTEX em agua, quando o agente funcionalizante é C8, C18 ou Ph2. Os resultados indicaram que as capacidades de adsorção, segundo o modelo de Langmuir, seguem a seguinte ordem C8≥C18>>Ph2. A partir disso, as propriedades de adsorção das demais sílicas funcionalizadas com C8 foram comparadas determinando-se que as capacidades de adsorção, segundo o modelo de Langmuir, estão na seguinte ordem: MCM-48>Sílica>NPSiO2>MCM-41. O nanocompósito organofuncionalizado MCM48-C8/SPION, que mostrou as melhores propriedades de adsorção, foi usado para a extração em fase sólida magnética (m-SPE) de BTEX em agua de posto de gasolina. Verificou-se que apenas 30 mg de adsorvente, 5 min de contato com a solução de BTEX, 1 min para remoção do adsorvente e 1 min para a extração foram suficientes para concentração/recuperação de BTEX de agua pela técnica de m-SPE, viabilizando a análise quantitativa, no caso por CG-MS. / The contamination of water bodies by Benzene, Toluene, Ethylbenzene and Xylenes (BTEX) has prompted the development of more efficient methodologies for their removal and the development of sufficiently sensitive, selective, reproducible and fast analytical methods for environmental monitoring. In this context, adsorbent materials with magnetic properties appear as efficient, low cost and easy automation alternatives, including the development of analytical methods based on magnetic solid phase extraction (m-SPE), which has gaining increasing interest since allows rapid extraction and effective analysis of pollutants with high sensitivity. The search for suitable adsorbents requires the study of materials with large surface area, functionalizable and stable as the silica\'s family, more specifically a comparison between the types of silica and the type of functionalizing agent on their adsorption/desorption properties. Magnetic organofunctionalized mesoporous silicas with different morphologies were prepared: ordered mesoporous silica MCM-48 and MCM-41, as well as spherical nanoparticles of mesoporous silica (NPSiO2). The formation of ordered mesoporous silica begins with the preparation of a CTAB template on which silica is deposited/formed to produce MCM-41 and MCM-48 materials. The CTAB concentration must be carefully controlled since colloidal structures with different morphologies can be generated by varying this parameter. The FTIR, XRD and N2 sorption spectroscopy analyzes confirmed the preparation of ordered mesoporous silica materials with a gyroid 3D (MCM-48), or hexagonal type (MCM-41) arrangement respectively with a surface area of 1212 m2.g-1 and 1159 m2.g-1. In addition, the MET images of the MCM-48 material showed mean particle size equal to 116 nm ± 15 nm. To facilitate removal from water, magnetite nanoparticles (SPIONs) were incorporated into the surface of adsorbent materials. The typical removal time was determined to be 1 minute. The organofunctionalization of the silica with octadecylsilane (C18), octylsilane (C8) and diphenylsilane (Ph2) was confirmed by FTIR spectroscopy and thermogravimetric analysis demonstrating the presence and allowing the determination of the mass percentage of the organic fraction in each type of mesoporous silica. Using commercial silica gel (Silica) as reference, the adsorption properties toward BTEX in water were compared when the functionalizing agent is C8, C18 or Ph2. The results indicated that the adsorption capacities, according to the Langmuir model, decrease in the following order C8 ≥ C18 >> Ph2. From this, the adsorption properties of the C8 functionalized silicas were compared showing that the adsorption capacities according to the Langmuir model decrease in the following order: MCM-48 > Silica > NPSiO2 > MCM-41. The organofunctionalized nanocomposite MCM48-C8/SPION, exhibiting the best adsorption properties, was used in magnetic solid phase extraction (m-SPE) of BTEX from gas station water. Only 30 mg of adsorbent, 5 min of contact with the BTEX solution, 1 min to remove the adsorbent and 1 min for extraction were enough for concentration/recovery of BTEX in water by m-SPE technique suitable for quantitative analysis, in this case by CG-MS.

Nesse trabalho de duas partes, colunas monolíticas poliméricas foram aplicadas em extração em fase sólida e em nanocromatografia capilar, duas das suas mais importantes aplicações. Na primeira parte foi desenvolvido um monolito para extração em fase sólida dos metais Cd(II), Pb(II) e Cu(II), que foi acoplada on-line com detecção eletroquímica com o auxílio de instrumentação de análise por injeção sequencial (SIA). A coluna usada como suporte sólido para extração em fase sólida foi obtida com a copolimerização entre formador de ligação cruzada etileno dimetacrilato (EDMA) e monômero funcional glicidil metacrilato (GMA), preparada a partir de uma mistura reacional composta de 30% GMA, 10% EDMA, 5% H2O, 35% n-propanol e 20% 1,4- butanodiol, aquecida durante 24 horas à 60°C. Essa composição e condições de polimerização favoreceram a permeabilidade do monolito, o que foi necessário para o acoplamento no SIA. Após a obtenção do monolito base o mesmo foi modificado pela reação do anel epóxi do grupo GMA com ácido iminodiacético (IDA) para garantir propriedades de quelação de metais e maior capacidade de adsorção para a coluna. O monolito foi caracterizado com imagens de microscopia de varredura eletrônica (MEV) e a capacidade de extração foi de 4,4 ± 0,3 mg Cu(II) m-1 obtida com curvas de breakthrough. O método de determinação on-line dos metais operado por SIA, que executou as etapas de carregamento de amostra, limpeza da coluna, eluição dos analitos e recondicionamento dos sítios ativos teve frequência amostral de 6,8 injeções por hora. Os limites de detecção (LD) e quantificação (LQ) para o método foram, respectivamente, de 1,0 e 3,3 µg L-1 para o Cd(II), 0,7 e 2,2 µg L-1 para o Pb(II) e 0,5 e 1,8 µg L-1 para o Cu(II). O método foi aplicado na determinação dos metais em diferentes matrizes de águas naturais, sendo encontrado Cu(II) em algumas amostras. A exatidão do método foi avaliada com estudos de adição e recuperação nessas águas, obtendo-se valores entre 75,5 e 116,6%. Na segunda parte do trabalho foi utilizada uma coluna polar composta da sulfobetaína zwitteriônica N,N-dimetil-N-metacriloil-oxietil-N-(3-sulfopropil) amônio betaína (MEDSA) e do formador de ligações cruzadas dioxietil dimetacrilato (DiEDMA) em Nanocromatografia de Interação Hidrofílica (HILIC) para fazer a separação de Dopamina, Epinefrina, Norepinefrina, L-DOPA, Tiramina, DOPAC e Ácido Homovanílico, neurotransmissores, alguns de seus metabólitos e precursores, compostos polares de baixa massa molecular. A seletividade cromatográfica da coluna foi altamente dependente da composição da fase móvel aquosa:orgânica, apresentando um mínimo de retenção na transição do mecanismo HILIC para a fase reversa (RP). Ajustando os dados experimentais de fatores de retenção em função da composição da fase móvel com o modelo de retenção duplo foi possível prever qual composição de fase móvel promoveria a separação dos analitos da mistura, que foi atingida em torno de 85% acetonitrila e 15% H2O. A coluna foi modificada com o grupo zwitteriônico 2-metacriloil-oxietil fosforilcolina (MPC) por UV grafting e a modificação da metade do comprimento da coluna durante 30 minutos de exposição UV levou às mudanças na seletividade cromatográfica. / In this two parts work, polymeric monolithic columns were applied in solid phase extraction and in capillary nanochromatography, two of their most important applications. In the first part, a monolith for solid phase extraction of Cd(II), Pb(II) and Cu(II) metals was developed and coupled online with electrochemical detection with the aid of sequential injection analysis instrumentation (SIA). The column used as a solid support for solid phase extraction was obtained by copolymerization between the crosslinker ethylene dimethacrylate (EDMA) and the functional monomer glycidyl methacrylate (GMA), prepared from a reaction mixture composed of 30% GMA, 10% EDMA, 5% H2O, 35% n-propanol and 20% 1,4-butanediol, heated at 60 ° C for 24 hours. This composition and polymerization conditions favored monoliths permeability, which was required for the SIA coupling. After obtaining the base monolith, it was modified by reaction of the epoxy ring of the GMA group with the iminodiacetic acid (IDA) to guarantee metals chelating properties and increase adsorption capacity for the column. The monolith was characterized by scanning electron microscopy (SEM) images and extraction capacity was 4.4 ± 0.3 mg Cu(II) m-1, obtained from breakthrough curves. The method for online determination of metals operated by SIA, which performed the steps of sample loading, column cleaning, analyte elution and reconditioning of active sites had a sampling throughput of 6.8 injections per hour. The limits of detection (LD) and quantification (LQ) for the method were, respectively, 1.0 and 3.3 µg L-1 for Cd(II), 0.7 and 2.2 µg L-1 for the Pb(II) and 0.5 and 1.8 µg L-1 for Cu(II). The method was applied for the determination of metals in different natural water matrices, finding Cu(II) in some samples. The accuracy of the method was evaluated with addition and recovery studies in these waters, finding recoveries between 75.5 and 116.6%. In the second part of the work, a polar column composed of the zwitterionic sulfobetaine N,N-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine (MEDSA) and the cross-linker dioxyethyl dimethacrylate (DiEDMA) was used in Hydrophilic Interaction Nanocromatography (HILIC) to separate Dopamine, Epinephrine, Norepinephrine, L-DOPA, Tyramine, DOPAC and Homovanilic Acid, neurotransmitters, some of its metabolites and precursors, which are polar compounds of low molecular mass. The chromatographic selectivity of the column was highly dependent on the composition of the aqueous:organic mobile phase, showing a minimum retention at the transition from the HILIC to the reverse phase (RP) mechanism. By adjusting the experimental data of retention factors as a function of mobile phase composition with the double retention model it was possible to predict which mobile phase composition would promote the separation of the mixed analytes, which was achieved around 85% acetonitrile and 15% H2O. The column was modified with the 2-methacryloyl oxyethyl phosphorylcholine (MPC) zwitterionic group by UV grafting and the modification of half columns length during 30 minutes of UV exposure led to changes in the chromatographic selectivity.

No presente estudo, duas espécies de fungos isoladas do ambiente marinho tiveram seus extratos brutos ativos contra Staphylococcus aureus e Candida albicans para uma espécie de P. citrinum e, atividade citotóxica e contra Mycobacterium tuberculosis para uma espécie de P. oxalicum. Estas foram estudadas com a finalidade de otimizar suas condições de crescimento para produção de metabólitos secundários. Foram realizadas análises multivariadas utilizando planejamento fatorial fracionário. Foram obtidas duas condições ótimas de crescimento para as duas linhagens de Penicillium. O crescimento em maior volume em condições de cultura otimizadas para P. oxalicum permitiu observar a presença de três metabólitos secundários no extrato do meio de cultura. Dois puderam ser isolados e identificados: a meleagrina 52 e a oxalina 26. A metodologia utilizada para se obter uma maior quantidade de metabólitos secundários proporcionou, ainda, o incremento em cerca de 150% na área do pico da oxalina. A partir do crescimento em maior volume em condições de cultura otimizadas para P. citrinum foi possível observar presença de pelo menos onze diferentes metabólitos na análise dos extratos obtidos do meio de cultura. Foi possível identificar e isolar quatro compostos já conhecidos: a (8E)-1-(2,3-diidropirrol-1-il)-2-metildec-8-eno-1,3-diona 56; a 1-(2,3-diidropirrol-1-il)-2-metildecano-1,3-diona 58; a 2-((E)-hept-5-enil)-6,7,8,8a-tetraidro-3-metilpirrolo[2,1-b][1,3]oxazin-4-ona 59 e a citrinina 31. Também foram isolados dois novos alcalóides indólicos contendo um grupo nitro na molécula que foram nomeadas de citrinalinas A 60 e B 62. Foi realizado, também, um estudo com P. citrinum visando a maior produção das citrinalinas, que possibilitou o incremento na produção da citrinalina B. / In this study, two species of fungi isolated from the marine environment had their active extracts against Staphylococcus aureus and Candida albicans to a strain of P. citrinum, and activity cytotoxic and against Mycobacterium tuberculosis to a strain of P. oxalicum. This studied aims the optimization their growth conditions for the production of secondary metabolites. Multivariate analysis using a fractional factorial design were used to establish optimal growth conditions for both Penicillium strains. Two optimal growth conditions were obtained for both Penicillium strains. A largest growth volume of P. oxalicum using optimized conditions enabled the detection of three secondary metabolites in the culture media crude extract. Two of such compounds were isolated and identified: meleagrin 52 and oxaline 26. The methodology used to increase the production of secondary metabolites by P. citrinum enabled an increase of 150% in the peak area of oxaline. A largest growth volume of P. citrinum led to the detection of eleven different metabolites in the culture media. Four of these compounds were isolated and identified as the known (8E)-1-(2,3-dihydropyrrol-1-yl)-2-methyldec-8-ene-1,3-dione 56; the 1-(2,3-dihydropyrrol-1-yl)-2-methyldecane-1,3-dione 58; the 2-((E)-hept-5-enyl)-6,7,8,8a-tetrahydro-3-methylpyrrolo[2,1-b][1,3]oxazin-4-one 59 and citrinin 31. Two new indole alkaloids containing a nitro group were also isolated and identified, named citrinalins A 60 and B 62. A further study with P. citrinum aiming an enhanced production of citrinalins allowed a significant increase in the production of citrinalin B.

A contaminação de aguas pela mistura Benzeno, Tolueno, Etilbenzeno e Xilenos (BTEX) vem gerando a necessidade do desenvolvimento de metodologias altamente eficientes na remoção de poluentes e de metodologias analíticas para monitoramento ambiental suficientemente sensíveis, seletivos, reprodutíveis e rápidos. Nesse contexto, adsorventes com propriedades magnéticas aparecem como alternativas eficientes, de baixo custo e de fácil automação, inclusive possibilitando o desenvolvimento de metodologia analítica baseada na extração em fase sólida magnética (m-SPE), que vem ganhando interesse crescente por permitir extração rápida e análise efetiva dos poluentes com alta sensibilidade. A busca por adsorventes adequados exige o estudo de materiais com grande área superficial, funcionalizáveis e estáveis como as sílicas, mais especificamente uma comparação entre os tipos de sílica e do tipo de agente funcionalizante nas propriedades de adsorção/dessorção. Sílicas mesoporosas oraganofuncionalizas magnéticas com diferentes morfologias foram preparadas: sílica mesoporosa ordenada MCM-48 e MCM-41, bem como nanoparticulas esféricas de sílica mesoporosa (NPSiO2). A formação da silica mesoporosa ordenada começa com a preparação de um template de CTAB sobre o qual são depositados/formados os materiais MCM-41 e MCM-48. A concentração de CTAB deve ser controlada com cuidado pois estruturas com diferentes morfologias podem ser geradas variando-se esse parâmetro. As análises de espectroscopia FTIR, DRX e sorção de N2 revelaram que os materiais preparados são sílicas mesoporosas ordenadas com arranjo tipo giroide 3D (MCM-48) ou do tipo hexagonal (MCM-41) com área superficial respectivamente de 1212 m2.g-1 e 1159 m2.g-1. Além disso, as imagens de MET do material MCM-48 mostraram tamanho médio de partícula igual a 116 nm ± 15 nm. Para facilitar a remoção do adsorvente, nanopartículas de magnetita (SPION) foram incorporadas na superfície dos materiais adsorventes. O tempo de remoção típico foi determinado como sendo de 1 minuto. A organofuncionalização da sílica com octadecilssilano (C18), octilssilano (C8) e difenilssilano (Ph2) foi confirmada por espectroscopia FTIR e análise termogravimétrica demostrando a presença e a percentagem em massa dos grupos orgânicos em cada tipo de sílica mesoporosa. Usando como referência sílica gel 60 comercial (Sílica), foram comparadas as propriedades de adsorção frente a BTEX em agua, quando o agente funcionalizante é C8, C18 ou Ph2. Os resultados indicaram que as capacidades de adsorção, segundo o modelo de Langmuir, seguem a seguinte ordem C8≥C18>>Ph2. A partir disso, as propriedades de adsorção das demais sílicas funcionalizadas com C8 foram comparadas determinando-se que as capacidades de adsorção, segundo o modelo de Langmuir, estão na seguinte ordem: MCM-48>Sílica>NPSiO2>MCM-41. O nanocompósito organofuncionalizado MCM48-C8/SPION, que mostrou as melhores propriedades de adsorção, foi usado para a extração em fase sólida magnética (m-SPE) de BTEX em agua de posto de gasolina. Verificou-se que apenas 30 mg de adsorvente, 5 min de contato com a solução de BTEX, 1 min para remoção do adsorvente e 1 min para a extração foram suficientes para concentração/recuperação de BTEX de agua pela técnica de m-SPE, viabilizando a análise quantitativa, no caso por CG-MS. / The contamination of water bodies by Benzene, Toluene, Ethylbenzene and Xylenes (BTEX) has prompted the development of more efficient methodologies for their removal and the development of sufficiently sensitive, selective, reproducible and fast analytical methods for environmental monitoring. In this context, adsorbent materials with magnetic properties appear as efficient, low cost and easy automation alternatives, including the development of analytical methods based on magnetic solid phase extraction (m-SPE), which has gaining increasing interest since allows rapid extraction and effective analysis of pollutants with high sensitivity. The search for suitable adsorbents requires the study of materials with large surface area, functionalizable and stable as the silica\'s family, more specifically a comparison between the types of silica and the type of functionalizing agent on their adsorption/desorption properties. Magnetic organofunctionalized mesoporous silicas with different morphologies were prepared: ordered mesoporous silica MCM-48 and MCM-41, as well as spherical nanoparticles of mesoporous silica (NPSiO2). The formation of ordered mesoporous silica begins with the preparation of a CTAB template on which silica is deposited/formed to produce MCM-41 and MCM-48 materials. The CTAB concentration must be carefully controlled since colloidal structures with different morphologies can be generated by varying this parameter. The FTIR, XRD and N2 sorption spectroscopy analyzes confirmed the preparation of ordered mesoporous silica materials with a gyroid 3D (MCM-48), or hexagonal type (MCM-41) arrangement respectively with a surface area of 1212 m2.g-1 and 1159 m2.g-1. In addition, the MET images of the MCM-48 material showed mean particle size equal to 116 nm ± 15 nm. To facilitate removal from water, magnetite nanoparticles (SPIONs) were incorporated into the surface of adsorbent materials. The typical removal time was determined to be 1 minute. The organofunctionalization of the silica with octadecylsilane (C18), octylsilane (C8) and diphenylsilane (Ph2) was confirmed by FTIR spectroscopy and thermogravimetric analysis demonstrating the presence and allowing the determination of the mass percentage of the organic fraction in each type of mesoporous silica. Using commercial silica gel (Silica) as reference, the adsorption properties toward BTEX in water were compared when the functionalizing agent is C8, C18 or Ph2. The results indicated that the adsorption capacities, according to the Langmuir model, decrease in the following order C8 ≥ C18 >> Ph2. From this, the adsorption properties of the C8 functionalized silicas were compared showing that the adsorption capacities according to the Langmuir model decrease in the following order: MCM-48 > Silica > NPSiO2 > MCM-41. The organofunctionalized nanocomposite MCM48-C8/SPION, exhibiting the best adsorption properties, was used in magnetic solid phase extraction (m-SPE) of BTEX from gas station water. Only 30 mg of adsorbent, 5 min of contact with the BTEX solution, 1 min to remove the adsorbent and 1 min for extraction were enough for concentration/recovery of BTEX in water by m-SPE technique suitable for quantitative analysis, in this case by CG-MS.

Nesse trabalho de duas partes, colunas monolíticas poliméricas foram aplicadas em extração em fase sólida e em nanocromatografia capilar, duas das suas mais importantes aplicações. Na primeira parte foi desenvolvido um monolito para extração em fase sólida dos metais Cd(II), Pb(II) e Cu(II), que foi acoplada on-line com detecção eletroquímica com o auxílio de instrumentação de análise por injeção sequencial (SIA). A coluna usada como suporte sólido para extração em fase sólida foi obtida com a copolimerização entre formador de ligação cruzada etileno dimetacrilato (EDMA) e monômero funcional glicidil metacrilato (GMA), preparada a partir de uma mistura reacional composta de 30% GMA, 10% EDMA, 5% H2O, 35% n-propanol e 20% 1,4- butanodiol, aquecida durante 24 horas à 60°C. Essa composição e condições de polimerização favoreceram a permeabilidade do monolito, o que foi necessário para o acoplamento no SIA. Após a obtenção do monolito base o mesmo foi modificado pela reação do anel epóxi do grupo GMA com ácido iminodiacético (IDA) para garantir propriedades de quelação de metais e maior capacidade de adsorção para a coluna. O monolito foi caracterizado com imagens de microscopia de varredura eletrônica (MEV) e a capacidade de extração foi de 4,4 ± 0,3 mg Cu(II) m-1 obtida com curvas de breakthrough. O método de determinação on-line dos metais operado por SIA, que executou as etapas de carregamento de amostra, limpeza da coluna, eluição dos analitos e recondicionamento dos sítios ativos teve frequência amostral de 6,8 injeções por hora. Os limites de detecção (LD) e quantificação (LQ) para o método foram, respectivamente, de 1,0 e 3,3 µg L-1 para o Cd(II), 0,7 e 2,2 µg L-1 para o Pb(II) e 0,5 e 1,8 µg L-1 para o Cu(II). O método foi aplicado na determinação dos metais em diferentes matrizes de águas naturais, sendo encontrado Cu(II) em algumas amostras. A exatidão do método foi avaliada com estudos de adição e recuperação nessas águas, obtendo-se valores entre 75,5 e 116,6%. Na segunda parte do trabalho foi utilizada uma coluna polar composta da sulfobetaína zwitteriônica N,N-dimetil-N-metacriloil-oxietil-N-(3-sulfopropil) amônio betaína (MEDSA) e do formador de ligações cruzadas dioxietil dimetacrilato (DiEDMA) em Nanocromatografia de Interação Hidrofílica (HILIC) para fazer a separação de Dopamina, Epinefrina, Norepinefrina, L-DOPA, Tiramina, DOPAC e Ácido Homovanílico, neurotransmissores, alguns de seus metabólitos e precursores, compostos polares de baixa massa molecular. A seletividade cromatográfica da coluna foi altamente dependente da composição da fase móvel aquosa:orgânica, apresentando um mínimo de retenção na transição do mecanismo HILIC para a fase reversa (RP). Ajustando os dados experimentais de fatores de retenção em função da composição da fase móvel com o modelo de retenção duplo foi possível prever qual composição de fase móvel promoveria a separação dos analitos da mistura, que foi atingida em torno de 85% acetonitrila e 15% H2O. A coluna foi modificada com o grupo zwitteriônico 2-metacriloil-oxietil fosforilcolina (MPC) por UV grafting e a modificação da metade do comprimento da coluna durante 30 minutos de exposição UV levou às mudanças na seletividade cromatográfica. / In this two parts work, polymeric monolithic columns were applied in solid phase extraction and in capillary nanochromatography, two of their most important applications. In the first part, a monolith for solid phase extraction of Cd(II), Pb(II) and Cu(II) metals was developed and coupled online with electrochemical detection with the aid of sequential injection analysis instrumentation (SIA). The column used as a solid support for solid phase extraction was obtained by copolymerization between the crosslinker ethylene dimethacrylate (EDMA) and the functional monomer glycidyl methacrylate (GMA), prepared from a reaction mixture composed of 30% GMA, 10% EDMA, 5% H2O, 35% n-propanol and 20% 1,4-butanediol, heated at 60 ° C for 24 hours. This composition and polymerization conditions favored monoliths permeability, which was required for the SIA coupling. After obtaining the base monolith, it was modified by reaction of the epoxy ring of the GMA group with the iminodiacetic acid (IDA) to guarantee metals chelating properties and increase adsorption capacity for the column. The monolith was characterized by scanning electron microscopy (SEM) images and extraction capacity was 4.4 ± 0.3 mg Cu(II) m-1, obtained from breakthrough curves. The method for online determination of metals operated by SIA, which performed the steps of sample loading, column cleaning, analyte elution and reconditioning of active sites had a sampling throughput of 6.8 injections per hour. The limits of detection (LD) and quantification (LQ) for the method were, respectively, 1.0 and 3.3 µg L-1 for Cd(II), 0.7 and 2.2 µg L-1 for the Pb(II) and 0.5 and 1.8 µg L-1 for Cu(II). The method was applied for the determination of metals in different natural water matrices, finding Cu(II) in some samples. The accuracy of the method was evaluated with addition and recovery studies in these waters, finding recoveries between 75.5 and 116.6%. In the second part of the work, a polar column composed of the zwitterionic sulfobetaine N,N-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine (MEDSA) and the cross-linker dioxyethyl dimethacrylate (DiEDMA) was used in Hydrophilic Interaction Nanocromatography (HILIC) to separate Dopamine, Epinephrine, Norepinephrine, L-DOPA, Tyramine, DOPAC and Homovanilic Acid, neurotransmitters, some of its metabolites and precursors, which are polar compounds of low molecular mass. The chromatographic selectivity of the column was highly dependent on the composition of the aqueous:organic mobile phase, showing a minimum retention at the transition from the HILIC to the reverse phase (RP) mechanism. By adjusting the experimental data of retention factors as a function of mobile phase composition with the double retention model it was possible to predict which mobile phase composition would promote the separation of the mixed analytes, which was achieved around 85% acetonitrile and 15% H2O. The column was modified with the 2-methacryloyl oxyethyl phosphorylcholine (MPC) zwitterionic group by UV grafting and the modification of half columns length during 30 minutes of UV exposure led to changes in the chromatographic selectivity.

Le SO2 est un additif utilisé en oenologie pour ses propriétés antiseptiques,antioxydantes et antioxydasiques. Il est introduit dans les vins en grandes quantités en raisonde son fort pouvoir de combinaison avec les dérivés carbonylés, ce qui limite son activité. Leproblème est que les teneurs maximales de SO2 autorisées ne permettent pas toujours uneprotection suffisante du vin contre les phénomènes de refermentation. L'objectif principal dece projet était de réduire la concentration en dioxyde de soufre dans les vins en éliminant unepartie des dérivés carbonylés responsables de la combinaison bisulfitique. La méthoderetenue a été l’extraction sur phase solide (SPE). Elle fait intervenir des interactions entre unephase liquide et un support solide poreux modifié avec une fonction extractive. Les travauxantérieurs ont permis de sélectionner l’hydrazine et la sulfonylhydrazine comme agentsd’extraction. Ces fonctions ont été fixées sur des supports polymères organiques selon deuxvoies : la fonctionnalisation de résines sulfoniques commerciales et la copolymérisation ensuspension de méthacrylate de glycidyle suivie d’une fonctionnalisation. Les supports solidesobtenus ont été caractérisés afin de valider la fonctionnalisation. Ils ont ensuite été testés surdes solutions modèles du vin et le procédé a prouvé son efficacité. La présence decontaminants dans les solutions a été recherchée avant d’appliquer la méthode sur du vin. / SO2 is an additive used in enology for its antiseptic, antioxidant and antioxydasic properties. It is introduced in wines in large quantities due to its high binding power with carbonyl compounds, which limits its activity. The maximum SO2 content authorized is notalways enough to avoid fermentative phenomena during wine storage. The main objective of this project was to develop a method to reduce the sulfur dioxide concentration in wines byeliminating some of carbonyl compounds responsible for the SO2 binding. The method used was solid-phase extraction (SPE). It involves interactions between a liquid and a porous solid support modified with an extractive function. Previous work allowed to select hydrazine andsulfonylhydrazine as extractive reagents. These functions were fixed on organic polymersupports according to two routes : functionnalization of commercial sulfonic resins and suspension copolymerization of glycidyl methacrylate (followed by the functionnalization). The solid supports obtained were characterized in order to validate the functionnalization.Then selective extractions were executed on model solutions. The diminution of carbonylcompounds concentration and SO2 content was showed by those experiments. The presence of contaminants in the solutions was investigated before applying the method to wine.

O 99mTc é o radionuclídeo mais utilizado em medicina nuclear. No Brasil os geradores de 99Mo/99mTc são produzidos exclusivamente pelo Centro de Radiofarmácia do IPEN-CNEN/SP, com 99Mo importado de diferentes fornecedores. O 99Mo (t1/2 = 66 h), por ser um produto de fissão do 235U, pode conter impurezas radionuclídicas prejudiciais à saúde humana. Dessa forma, para que o gerador seja utilizado de forma segura, é necessário que o 99Mo seja avaliado por ensaios de controle de qualidade e atenda à alguma especificação descrita em farmacopeia. A Farmacopeia Europeia (FE) apresenta monografia, com parâmetros (identificação, pureza radioquímica e pureza radionuclídica), métodos de análise, e limites, para avaliação da qualidade da solução de [99Mo] na forma de molibdato de sódio, que é utilizada como matéria-prima no preparo dos geradores de 99Mo/99mTc. No entanto, observa-se uma dificuldade na implementação e execução dos métodos por parte dos produtores de geradores, com pouca literatura sobre o assunto, provavelmente devido à falta de praticidade dos métodos propostos e à extensa lista de reagentes utilizados. Nesse trabalho foram avaliados vários parâmetros de qualidade do 99Mo descritos na monografia da FE. Foram estudados métodos de separação do 99Mo de suas impurezas radionuclídicas por extração em fase sólida (SPE) e por TLC. Após separação por SPE, foi proposta a quantificação de metais por ICP-OES para avaliar a porcentagem de retenção de Mo e a porcentagem de recuperação de Ru e Te e Sr em diversos tipos de cartuchos, em substituição ao uso de radiotraçadores. Observou-se que a marca de cartucho de SPE para separação do 99Mo recomendada pela FE apresentou baixa recuperação para Ru, quando comparado aos outros cartuchos de troca aniônica disponíveis no mercado. Amostras de 99Mo de diferentes fornecedores mundiais foram analisadas. Observou-se que é possível realizar a quantificação de 103Ru em amostras de 99Mo mesmo com tempos de decaimento acima de 4 semanas. Um método alternativo de separação do 99Mo do 131I por TLC apresentou resultados promissores. Não foi feita a quantificação das impurezas radionuclídicas emissoras beta e alfa. Todas as amostras analisadas apresentaram resultados dentro das especificações da FE para pureza radioquímica (>95%) e pureza radionuclídica. / 99mTc is the most used radionuclide in nuclear medicine. In Brazil, the 99Mo/99mTc generators are exclusively produced by Radiopharmacy Center at IPENCNEN/ SP, by importing 99Mo from different suppliers. 99Mo (t1/2 = 66 h) is a fission product of 235U and it can have radionuclidic impurities that are prejudicial for human health. For safe use of generators, it is necessary to perform the evaluation of 99Mo by quality control tests in order to assess if 99Mo complies with the specifications. The European Pharmacopoeia (EP) presents a monograph for evaluation of the quality of the [99Mo] solution as sodium molybdate,that is used as raw material for 99Mo/99mTc generators production, including specification parameters (identification, radiochemical purity and radionuclidic purity), analysis methods and limits. However, it has been observed difficulties on the execution and implementation of these methods by the generators producers, with a few literature about this subject, probably due to complexity of the proposed methods. In this work, many quality control parameters of 99Mo described in the EP monograph were evaluated. Separation methods for 99Mo from its radionuclidic impurities by solid phase extraction (SPE) and TLC were studied. After SPE separation, the quantification of metals by ICP-OES to evaluate the percentage of retention of Mo and the percentage of recovery of Ru, Te and Sr using different types of cartridges were proposed, replacing radiotracers use. It was observed that the specific type of SPE cartridge recommended by the EP for separation of 99Mo presented low recoveries for Ru, compared to other available anion exchange SPE cartridges. 99Mo samples from different worldwide suppliers were analyzed. It was observed that quantification of 103Ru in 99Mo samples with decay time higher than 4 weeks is possible. An alternative method for separation of 131I from 99Mo showed promising results by TLC. The quantification of beta and alpha emitters radionuclidic impurities was not performed. All analysed samples presented results that comply with EP specifications for radiochemical purity (>95%) and for radionuclidic purity.

<p>This thesis deals with the development of analytical methods for the determination of new antimalarial drugs in biological fluids. The goal was to develop methods that facilitate clinical studies performed in the field, such as capillary blood sampling onto sampling paper.</p><p>Methods for the determination of atovaquone (ATQ) in plasma, whole blood and capillary blood applied onto sampling paper were developed and validated. </p><p>Automated solid-phase extraction (SPE) and liquid chromatography (LC) with UV absorbance detection was used to quantify ATQ. Venous blood contained higher levels of ATQ than capillary blood after a single dose of Malarone (ATQ + proguanil).</p><p>Ion-pairing LC was used to separate amodiaquine (AQ), chloroquine (CQ) and their metabolites on a CN-column. A method for quantification of AQ, CQ and their metabolites in capillary blood applied onto sampling paper was developed and validated. Perchloric acid and acetonitrile were used to facilitate the extraction of the analytes from the sampling paper. The liquid extract was further cleaned by SPE.</p><p>Methods for the determination of piperaquine (PQ) in plasma and whole blood using SPE and LC were developed and validated. Addition of trichloroacetic acid (TCA) to the samples prior to injection into the LC-system significantly enhanced the efficiency for the PQ peak. Serum and whole blood contained higher levels (about 300 nM) of PQ than plasma (about 200 nM) after a single oral dose of 340 mg PQ. This indicates that PQ may be taken up in the leucocytes and thrombocytes.</p>

<p>Different sample preparation steps prior to a detection method are often essential in analytical chemistry. In this thesis, both static extractions and on-line coupled solid-phase extractions have been studied in combination with different detection techniques. Aspects of performing sample preparations in miniaturized analytical devices and the development of poly(dimethylsiloxane) (PDMS) microchips are discussed. Polypyrrole was also evaluated as an electrochemically controllable stationary phase for solid-phase microextraction (SPME) and solid-phase extraction (SPE).</p><p>The first part of this thesis describes the extraction of an organic compound from a very complex solid matrix utilizing the pressurized-fluid extraction (PFE) technique. The presented results show that PFE is easily optimized and enables rapid extractions and extracts relatively free from interferences.</p><p>An integrated three-electrode device, which enabled electrochemical (EC) SPME under potential control, was developed. With this device, both anions and cations could be extracted employing two types of polypyrrole films. Planar micro band electrodes positioned at the end of a capillary were also used to electrochemically extract and detect anions in a miniaturized flow system. Different analyte concentrations and preconcentration times were examined, and good linear correlations were found between the extraction time and the detection response. The on-line coupling of a thin layer EC cell, with a polypyrrole coated working electrode, to different mass spectrometric (MS) techniques is also described and evaluated. The results show that EC-SPE, employing polypyrrole as stationary phase, can be used as a preconcentration step prior to detection.</p><p>In addition, this thesis describes the development and on-line coupling of a microelectrode array equipped PDMS microchip with an integrated graphite electrospray emitter to electrospray ionization (ESI) MS. The system enabled short transfer times and an EC conversion efficiency of 30% at a flow rate of 0.5 μL/min. The on-line EC/ESI-MS experiments were significantly simplified using a wireless Bluetooth battery-powered EC instrument.</p>