This thesis presents a state-of-the-art-review and twodifferent approaches for solving the moving load problem ofcable-stayed and suspension bridges. The first approach uses a simplified analysis method tostudy the dynamic response of simple cable-stayed bridgemodels. The bridge is idealized as a Bernoulli-Euler beam onelastic supports with varying support stiffness. To solve theequation of motion of the bridge, the finite difference methodand the mode superposition technique are used. The second approach is based on the nonlinear finite elementmethod and is used to study the response of more realisticcable-stayed and suspension bridge models considering exactcable behavior and nonlinear geometric effects. The cables aremodeled using a two-node catenary cable element derived using"exact" analytical expressions for the elastic catenary. Twomethods for evaluating the dynamic response are presented. Thefirst for evaluating the linear traffic load response using themode superposition technique and the deformed dead load tangentstiffness matrix, and the second for the nonlinear traffic loadresponse using the Newton-Newmark algorithm. The implemented programs have been verified by comparinganalysis results with those found in the literature and withresults obtained using a commercial finite element code.Several numerical examples are presented including one for theGreat Belt suspension bridge in Denmark. Parametric studieshave been conducted to investigate the effect of, among others,bridge damping, bridge-vehicle interaction, cables vibration,road surface roughness, vehicle speed, and tuned mass dampers.From the numerical study, it was concluded that road surfaceroughness has great influence on the dynamic response andshould always be considered. It was also found that utilizingthe dead load tangent stiffness matrix, linear dynamic trafficload analysis give sufficiently accurate results from theengineering point of view. / QC 20100511

As características arquitetônicas e o desempenho estrutural de pontes suspensas, estaiadas ou pênseis, têm determinado a sua crescente utilização em obras de arte destinadas a vencer grandes vãos. Essa utilização crescente que ocorreu no mundo nas últimas décadas se repete agora nos últimos anos no país. Várias dessas obras estão em execução e em projeto. Um dos aspectos relevantes na análise estrutural das pontes suspensas é o de seu comportamento quando submetidas à ação do vento. Apresenta-se o sistema computacional ANA-PSp desenvolvido especialmente para o estudo do movimento de tabuleiros de pontes suspensas sujeitas a esforços aeroelásticos e aerodinâmicos. Esse sistema computacional formado por um conjunto de subsistemas, é elaborado para a análise aeroelástica de pontes suspensas sob a ação de vento e permite análises paramétricas extensas dos fenômenos de drapejamento (flutter) e de martelamento (buffeting). A discretização da estrutura é efetuada pelo método dos elementos finitos e a redução dos graus de liberdade é realizada por superposição modal com modos selecionados que melhor descrevem os movimentos do tabuleiro. Utiliza-se modelo matemático reduzido para a análise multimodal no domínio do tempo e da freqüência. A velocidade crítica ou velocidade de drapejamento é determinada por procedimento de autovalores complexos com a obtenção de freqüências e taxas de amortecimentos modais para várias velocidades do vento. Adicionalmente, o fenômeno do drapejamento é estudado por séries temporais de respostas de coordenadas generalizadas e de deslocamentos selecionados e por análise espectral dessas séries temporais, que permitem a verificação das características de vibração do tabuleiro da ponte no domínio da freqüência. O estudo do fenômeno de martelamento considera esforços aeroelásticos determinísticos e esforços aerodinâmicos estocásticos e apresentam-se resultados em espectros de potência de deslocamentos e em desvios padrão de deslocamentos ao longo do tabuleiro. Para validar o sistema ANA-PSp, apresentam-se estudos de caso para a ponte estaiada da Normandia, para a ponte pênsil colapsada de Tacoma Narrows e para a ponte estaiada projetada, mas não executada, sobre o Rio Tietê e localizada na extremidade do complexo viário Jacu-Pêssego. / The architectonic characteristics and the structural performance of suspension bridges and cable-stayed bridges have determined their growing use on large span bridges. This growing usage, which has occurred world-wide during the last decades, is now being repeated in Brazil during the last few years. Several such bridges are presently either undergoing construction or being designed. One of the outstanding aspects in the structural analysis of suspension bridges is their behavior under wind action. This paper presents the computer system ANA-PSp, specially developed for studying the movement of suspended bridge decks under aeroelastic and aerodynamic forces. This computer system is formed by a group of subsystems and is created for aeroelastic analysis of suspended bridges under wind action. It allows extended parametric analyses of the flutter and the buffeting phenomena. Structural discretization is done by the finite element method and the reduction of degrees of freedom is obtained by modal superposition of the selected modes which best describe the deck movements. A reduced mathematical model is used for the multimodal analysis in the time and frequency domains. Critical velocity or flutter velocity is determined by a procedure of complex eigenvalues which obtains frequencies and damping ratios for different wind speeds. Additionally, the flutter phenomenon is studied by temporal series of answers to generalized coordinate responses and of selected displacements by spectral analysis of such temporal series, which allow us to verify the characteristics of the vibrations of the bridge deck in the frequency domain. The study of the buffeting phenomenon considers deterministic aeroelastic and stochastic aerodynamic forces. The paper presents results in displacement power spectra and in the standard deviation of displacements along the deck. In order to validate system ANA-PSp, case studies are presented for the cable-stayed Ponte de Normandie in Le Havre (France), for the collapsed suspension bridge on Tacoma Narrows and for the cable-stayed bridge, already designed but not built, on Tietê River, located at one end of the highway complex Jacu-Pêssego (São Paulo, SP, Brazil).

As pontes estaiadas são exemplos de estruturas esbeltas e flexíveis onde a capacidade de utilização dos materiais tem grande importância. Neste sentido, para garantir a melhor utilização dos materiais envolvidos (aço e concreto, por exemplo), é preciso determinar as forças de protensão aplicadas aos cabos. A melhor distribuição dos momentos fletores no tabuleiro de ponte é aquela obtida com uma viga contínua. Pontes estaiadas fornecem apoios elásticos ao tabuleiro. O presente trabalho emprega o método da anulação dos deslocamentos, MAD, para obter as forças axiais a que os cabos estarão submetidos de modo a aproximar o comportamento do tabuleiro ao de uma viga contínua. O método MAD. proporciona uma estrutura economicamente mais viável. O código computacional desenvolvido realiza análises estática e modal por meio do método dos elementos finitos, MEF. A análise estática utilizada é a não linear geométrica, considerando as não linearidades do efeito de catenária do cabo, e dos elementos submetidos à compressão. O material é assumido no campo do regime elástico linear. A ponte é modelada por elementos de treliça plana com módulo de elasticidade de Dischinger, para simular os cabos, e elementos de pórtico plano para os elementos do tabuleiro e da torre. O carregamento da estrutura considera a atuação apenas do peso-próprio dos elementos estruturais. O código computacional desenvolvido permite, também, a análise modal da estrutura a fim de determinar suas frequências naturais e modos de vibração. A análise modal pode ser realizada com a matriz de massa concentrada, ou consistente. Em relação à matriz de rigidez, a análise modal da estrutura pode utilizar a matriz de rigidez linear, para uma análise de vibrações livres, ou a matriz de rigidez tangente para as análises de vibração sob tensões iniciais. Exemplos encontrados na literatura são resolvidos com o código computacional desenvolvido para verificação e validação. / The cable-stayed bridges are examples of slender and flexible where the usability of the materials is very important structures. In this sense, to ensure the best use of the materials involved (steel and concrete, for example), one must determine the forces applied to the prestressing cables. A better distribution of the bending moments in the bridge deck is obtained with a continuous beam. Cable-stayed bridges provide elastic support to the deck. This work employs the zero displacement method, ZDM, to determine the axial forces that the cables will be subjected to in order to approximate the behavior of the deck to the one as a continuous beam. The ZDM method provides an economically viable structure. The computational code performs static and modal analysis, which are performed by using the finite element method, FEM. The static analysis is a nonlinear geometric analysis which considers the nonlinearities of the cable sag, and the compression effects on the elements. The material is assumed in the field of linear elastic regime. The bridge is modeled by elements of plane truss with Dischingers elasticity module, to simulate cables and plane frame elements for the deck and the tower elements. The structure is subjected to self-weight of the elements. The computer code developed also performs the modal analysis of the structure to determine their natural frequencies and mode shapes. The modal analysis can be carried out with the concentrated or consistent mass matrix. In relation to the stiffness matrix, modal analysis of the structure may use a linear stiffness matrix for analysis of free vibration analysis or the tangent stiffness matrix for the analysis of vibration under initial stress. Examples in the literature are solved with the computational code developed for verification and validation.

Este trabalho apresenta o desenvolvimento de metodologia para avaliar a utilização do Sistema de Posicionamento Global (GPS) como ferramenta de pesquisa no estudo do comportamento dinâmico de obras viárias. Para ser caracterizado como um instrumento de medição, foi estudada a potencialidade de um método, que se fundamenta numa forma específica de coleta e processamento de dados GPS; análise dos resíduos resultantes do processamento da dupla diferença de fase e aplicação de análise espectral para filtragem de informações indesejáveis (multicaminhamento dos sinais GPS). A coleta envolve um oscilador eletro-mecânico, especialmente projetado, que permite calibrar as medidas de amplitude e freqüência das oscilações mensuráveis pela obra sob teste. Inúmeros experimentos foram realizados em ambientes de reflexões e difrações variáveis e com diversos tipos de receptores e antenas GPS. Alguns ensaios foram realizados utilizando, simultaneamente, equipamentos como transdutores de deslocamento, acelerômetros e estações totais. Comparando os resultados obtidos, mesmo com valores prescritos em normas e códigos, afirma-se que o GPS, sob o método de coleta de dados testado, é um instrumento confiável para detecção e caracterização do comportamento dinâmico de estruturas, apresentado confiabilidade para as medições realizadas, da ordem de décimos de milímetro. Quanto à detecção das freqüências, as mais baixas ficam comprometidas pela presença do multicaminhamento e as mais elevadas têm a detecção limitada pela máxima taxa de coleta dos receptores (Lei de Nyquist) / This work presents the development of a methodology to appraise the use of Global Positioning System (GPS) as a tool for researching of dynamic behavior of road transport structures. To be characterized as an instrument for measuring it was studied the potentiality of one method which includes a specific mode of GPS data collection; analyses of double difference phase residuals and application of spectral analyses and filtering for excluding undesirable information (multipath). The GPS data collected applies an electro-mechanical oscillator, specially built for that, which permits to calibrate the measures of frequency and amplitude of structure’s oscillations under dynamic load test. Several field tests were carried out in vicinities with high and low capacity of causing signal reflections and diffractions and with different types of GPS receivers and GPS antennas. A couple of fields were carried out using, at the same time, transducers of displacement, accelerometers and total stations. Comparing these results obtained even with values of codes, it is affirmed that GPS, under the data collection method tested, it is a trustworthy instrument for detection and characterization of dynamic behavior of structures, presenting reliability of measures ranging around tenths of millimeters. The very low frequencies are highly degraded by multipath and very high frequencies have its detection limited by the receiver data rate (Theorem’s Nyquist)

Cette thèse s'inscrit dans la continuation du travail de Younes Achkire, consacré au contrôle actif des ponts haubanés. Elle traite de l'implémentation d'un système de contrôle actif sur des maquettes de structures câblées. Deux types de structures sont étudiés expérimentalement: les ponts haubanés et les treillis spatiaux. Après une brève introduction sur l'usage du contrôle actif dans ces domaines, le chapitre 2 traite numériquement des mécanismes d'interaction entre le câble et la structure. Au chapitre 3, nous présentons la stratégie de contrôle que nous utilisons pour stabiliser une structure câblée: il s'agit d'un contrôle décentralisé, basé sur des paires capteur/actionneur colocalisées, placées au niveau des ancrages des câbles, chacune équipée d'un contrôleur Intégral Force Feedback. Nous présentons une théorie linéaire simplifiée permettant de dimensionner le système et de prévoir son efficacité. Elle est illustrée sur un exemple, et nous discutons de la validité de certaines hypothèses simplificatrices. Le chapitre 4 est consacré au contrôle actif des ponts haubanés. Nous y présentons 2 maquettes. La première, de petite taille (3m) représente un pylône de pont haubané en construction. Elle est équipée d'actionneurs piézoélectriques. La seconde, installée au Centre Commun de Recherche d'Ispra (Italie), mesure 30m de long, et est équipée d'actionneurs hydrauliques. Les expériences réalisées sur ces maquettes ont démontré l'efficacité du contrôle et la fiabilité de la théorie prédictive. Le contrôle du flottement des ponts est traité sur un exemple numérique. Le chapitre 5 relate nos expériences d'amortissement actif des treillis spatiaux. Deux structures ont été étudiées: une colonne en treillis équipée de 3 câbles actifs, et une structure triédrique suspendue à des cordons élastiques pour simuler l'absence de gravité, également munie de câbles actifs. Deux concepts d'actionneur piézoélectrique ont été testés. Nous avons ensuite examiné le problème de la saturation des actionneurs, et celui du contrôle actif des microvibrations (~10nm) d'une structure câblée. Le chapitre 6 conclut ce travail, en souligne les aspects originaux et donne quelques perspectives de développement. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished

The finite strip method (FSM) is a very efficient numerical method employed for performing the structural analysis of slender structures, such as cable-stayed bridges; the strip discretization of the model allows for the usage of a lower number of degrees of freedom, in comparison with the finite element method (FEM), while, as it will be discussed in the current research, the results obtained from both methods are in relatively good agreement. Moreover, to address the latest developments in the area of smart construction materials used for long-span bridges, the fiber reinforced polymer (FRP) composites were implemented for the bridge deck modeling, as part of a hybrid composite FRP cable-stayed bridge, and an extend laminate integrated finite strip method (LFSM) was applied for estimating the static structural performance of the hybrid composite FRP long-span cable-stayed bridge under several concentrated and uniformly distributed loadings. The free vibrations analysis was conducted for the Kap Shui Mun Cable-stayed Bridge model, and the natural frequencies were compared with the ones obtained from an FE model of the same bridge. One of the advantages of using the integrated finite strip method is that number of vibration modes, which can be included in the dynamic analysis when the effect of a sweeping sinus and a seismic loading are investigated when a conventional FE analysis would fail to converge. The outcomes of this research will set the stage for the hybrid long-span cable-stayed bridges modeling by the laminate integrated finite strip method (LFSM) which is more efficient and straightforward than the finite element analysis, for performing the static, free vibration, time domain, and frequency domain analyses.

This thesis deals with structural design of a steel frame footbridge with wheelchair access, which will lead pedestrian and cyclists‘ traffic over the river Thaya in Břeclav. The footbridge is a structure of one field, lightness of a bridge opening is 58,92 m and a span length is 60,25 m. A light width of an area between rails is 2,5 m. The footbridge is constructed of a truss beam cable – stayed bridge on an oblique pylon of 20,0 m length and a preloaded steel suspender. The thesis was processed according to valid standards ČSN EN.

The thesis deal with structural design of steel footbridge for pedestrians and cyclist over the Bečva river in Černotín village. Span of the footbridge is 50 m. The basic material is steel S355 and S460. At the beginning were created two variants. First one is an arched footbridge and the second one is cable stayed footbridge. After evaluation variants was selected the cable stayed footbridge. The selected variant was assessed in detail including joints and bearings. Structure is designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.17.01 of Dlubal company.

The aim of this master thesis is a design of the pedestrian bridge across the highway. The bridge is formed by a slab structure of 6 spans with lenghts from 9 to 51 m. The main spans are suspended on a V shape pylon. The deck of the span across the highway is assambled of precast segments and composite deck slab. The deck is in the lenghtways kept in the parabolic arch. The model of the construction is made in software ANSYS, the solution was done non-linear. The design and assessment are according to the europien standard.

The objective of this diploma thesis is a dynamic analysis of a cable-stayed walkway. The RFEM structural analysis software is used for the calculation. Design principles of the structure are explained and analysis of the construction phases is then performed. The eigenmodes of the structure are calculated for various material combinations. The thesis examines the effects of moving loads and earthquake effects using several different methods. A comparison of the various loading effects on the structure and also the calculation methods is presented at the conclusion.