Spelling suggestions: "subject:"swirling""
1 |
The Effect of Fuel Injector Geometry on the Flow Structure of a Swirl Stabilized Gas Turbine BurnerAnning, Grant Hugh Gary 24 September 2002 (has links)
No description available.
|
2 |
Experimental Development of a Lean Direct Injection Combustor Utilizing High-Low Swirl Intensity CombinationsEndicott, Derick S. January 2014 (has links)
No description available.
|
3 |
AERODYNAMICS OF LEAN DIRECT INJECTION COMBUSTOR WITH MULTI-SWIRLER ARRAYSCAI, JUN 20 July 2006 (has links)
No description available.
|
4 |
Aerodynamics and Combustion of Axial SwirlersFU, YONGQIANG 18 April 2008 (has links)
No description available.
|
5 |
Heat Transfer and Flow Characteristic Study in a Low Emission Annular CombustorSedalor, Teddy 04 June 2010 (has links)
Modern Dry Low Emissions (DLE) combustors are characterized by highly swirling and expanding flows that makes the convective heat load on the combustor liner gas side difficult to predict and estimate. A coupled experimental-numerical study of swirling flow and its effects on combustor liner heat transfer inside a DLE annular combustor model is presented. A simulated scaled up annular combustor shell was designed with a generic fuel nozzle provided by Solar Turbines to create the swirl in the flow. The experiment was simulated with a cold flow and heated walls. An infrared camera was used to obtain the temperature distribution along the liner wall. Experimentally measured pressure distributions were compared with the heat transfer results. The experiment was conducted at various Reynolds Numbers to investigate the effect on the heat transfer peak locations and pressure distributions. A CFD study was performed using Fluent and turbulence models and used to corroborate and verify the experimental results. Results show that the heat transfer enhancement in the annulus has slightly different characteristics for the concave and convex walls. Results also show a much slower drop in heat transfer coefficient enhancement with increasing Reynolds number compared to can combustors from a previous study. An introductory study of the effect of a soft wall on the heat transfer on the combustor liner is also presented. / Master of Science
|
6 |
Density-based unstructured simulations of gas-turbine combustor flowsAlmutlaq, Ahmed N. January 2007 (has links)
The goal of the present work was to identify and implement modifications to a density-based unstructured RANS CFD algorithm, as typically used in turbomachinery flows (represented here via the RoIIs-Royce 'Hydra' code), for application to Iow Mach number gas-turbine combustor flows. The basic algorithm was modified to make it suitable for combustor relevant problems. Fixed velocity and centreline boundary conditions were added using a characteristic based method. Conserved scalar mean and variance transport equations were introduced to predict scalar mixing in reacting flows. Finally, a flarnelet thermochemistry model for turbulent non-premixed combustion with an assumed shape pdf for turbulence-chemistry interaction was incorporated. A method was identified whereby the temperature/ density provided by the combustion model was coupled directly back into the momentum equations rather than from the energy equation. Three different test cases were used to validate the numerical capabilities of the modified code, for isothermal and reacting flows on different grid types. The first case was the jet in confined cross flow associated with combustor liner-dilution jetcore flow interaction. The second was the swirling flow through a multi-stream swirler. These cases represent the main aerodynamic features of combustor primary zones. The third case was a methane-fueled coaxial jet combustor to assess the combustion model implementation. This study revealed that, via appropriate modifications, an unstructured density-based approach can be utilised to simulate combustor flows. It also demonstrated that unstructured meshes employing nonhexahedral elements were inefficient at accurate capture of flow processes in regions combining rapid mixing and strong convection at angles to cell edges. The final version of the algorithm demonstrated that low Mach RANS reacting flow simulations, commonly performed using a pressure-based approach, can successfully be reproduced using a density-based approach.
|
7 |
Experimental Investigation of Aerodynamics and Combustion Properties of a Multiple-Swirler ArrayKao, Yi-Huan 18 September 2014 (has links)
No description available.
|
8 |
Design and Development of a High Swirl Burner with Gaseous Fuel Injection through Porous TubesRamalingam Ammaiyappan, Arul Kumaran January 2017 (has links)
No description available.
|
9 |
Numerical Analysis of Multi Swirler AerodynamicsRojatkar, Prachi January 2015 (has links)
No description available.
|
10 |
Heat Transfer and Flow Measurements on a One-Scale Gas Turbine Can Combustor ModelAbraham, Santosh 05 November 2008 (has links)
Combustion designers have considered back-side impingement cooling as the solution for modern DLE combustors. The idea is to provide more cooling to the deserved local hot spots and reserve unnecessary coolant air from local cold spots. Therefore, if accurate heat load distribution on the liners can be obtained, then an intelligent cooling system can be designed to focus more on the localized hot spots. The goal of this study is to determine the heat transfer and pressure distribution inside a typical can-annular gas turbine combustor. This is one of the first efforts in the public domain to investigate the convective heat load to combustor liner due to swirling flow generated by swirler nozzles. An experimental combustor test model was designed and fitted with a swirler nozzle provided by Solar Turbines Inc. Heat transfer and pressure distribution measurements were carried out along the combustor wall to determine the thermo-fluid dynamic effects inside a combustor. The temperature and heat transfer profile along the length of the combustor liner were determined and a heat transfer peak region was established.
Constant-heat-flux boundary condition was established using two identical surface heaters, and the Infrared Thermal Imaging system was used to capture the real-time steady-state temperature distribution at the combustor liner wall. Analysis on the flow characteristics was also performed to compare the pressure distributions with the heat transfer results. The experiment was conducted at two different Reynolds numbers (Re 50,000 and Re 80,000), to investigate the effect of Reynolds Number on the heat transfer peak locations and pressure distributions. The results reveal that the heat transfer peak regions at both the Reynolds numbers occur at approximately the same location. The results from this study on a broader scale will help in understanding and predicting swirling flow effects on the local convective heat load to the combustor liner, thereby enabling the combustion engineer to design more effective cooling systems to improve combustor durability and performance. / Master of Science
|
Page generated in 0.027 seconds