Over the past few decades many researchers have investigated the utility of in vitro - in vivo correlations for the assessment of dosage forms. These investigations are, however, dependent on reproducible dissolution data and well conducted biostudies in order to establish meaningful and robust correlations. Despite the fact that the establishment of such correlations is perhaps idealistic, considerable interest has still been shown in this area of research. Various Controlled/Modified Release Dosage Forms (CMRD's) of theophylline, a weakly basic drug, and indomethacin, a weakly acidic drug, were assessed in order to establish in vitro - in vivo correlations. Dissolution rate studies were carried out using either the USP basket or paddle apparatus. The dissolution rate studies were conducted in a range of dissolution media of varying pH. Bioavailability studies were conducted on the dosage forms used by the Biopharmaceutics Research Institute at Rhodes University. The results of these biostudies were kindly made available for use in this research project. Type A correlations were established using a mathematical simulation process whereby expected in vivo responses are simulated and compared to actual profiles obtained for the dosage forms. In order to perform the simulations the dissolution rate profiles were stripped and using linear regression and the methods of residuals the dissolution rate order and the relevant dissolution rates were obtained. The results of the s imulations indicated that the in vivo serum concentration-time curves could be accurately predicted for the theophylline dosage forms but to a lesser extent, for the indomethacin formulations. The dissolution rate studies indicated that the paddle method is a suitable method for dissolution rate studies of theophylline CMRD's, although it appeared that the optimum pH of the dissolution medium was formulation dependent. Dissolution rate studies conducted on indomethacin formulations indicated that the USP specified basket method for extended-release indomethacin formulations was not able to distinguish between two formulations which exhibited different in vivo profiles. The conversion to the paddle method was, however, able to highlight the differences between these formulations. The use of three dimensional topographs to depict dissolution rate profiles was demonstrated for formulations of both theophylline and indomethacin. The topographs enabled the successful differentiation between bioinequivalent formulations. The dissolution rate profiles were also fitted to the Wei bull equation and the parameters obtained from this were compared to the Weibull parameters obtained from the in vivo absorption plots obtained using the Wagner-Nelson method. The results indicated that the Weibull function was suitable to describe both the in vivo and in vitro data. The following recommendations for the preformulation dissolution studies of weakly acidic and weakly basic drugs are proposed. The dissolution rate studies of weakly acid drugs, such as indomethacin, should be carried out over a range of pH utilising the paddle apparatus. Three dimensional topographs based on the dissolution data should be constructed and used as a comparative tool for different formulations. Based on these comparisons the appropriate formulation can then be selected for a pilot scale in vivo bioavailability study. The dissolution rate studies of weakly basic drugs, such as theophylline, should be carried out over a range of pH utilising the paddle apparatus. The dissolution data should then be used to simulate the expected in vivo profile and on this basis the appropriate formulation selected for a pilot scale bioavailability study. The above approach to the preformulation studies of new CMRO's would allow for the more careful selection of new dosage forms and could thus eliminate costly and unnecessary bioavailability studies performed on inferior formulations.

In asthma therapy, the use of theophylline to prevent bronchial spasm and glucocorticoids to decrease inflammation is widely indicated. Apart from the acute asthma attack oral theophylline is treated for chronic therapy in order to minimize inflammation and to enhance the efficiency of corticosteroids and recover steroids’ anti-inflammatory actions in COPD treatment. The preferred application route for respiratory disease treatment is by inhalation, such as dry powder inhalers (DPI) being the delivery systems of first choice. As shown recently, there is an advantageous effect if the drugs are given simultaneously which is caused by a synergistic effect at the same target cell in the lung epithelia. Therefore, it seems rational to combine both substances in one particle. This type of particle has the advantage over a combination product containing both drugs in a physical mixture which occurs rather randomly deposition leading to API segregation and non-dose-uniformity. Dry powder inhalers (DPIs) is a type of therapeutic pharmaceutical formulations usually present in the solid form. Due to the nature of the solid-state, an understanding of chemical and physical properties must be established for acquiring optimum performance of the active pharmaceutical ingredients (APIs). In recent year, generation of DPIs is a destructive procedure to meet the micron size. Such processes are inefficient and difficult to control. Moreover, according to current researches on combination APIs formulation, this type of DPIs performed a greater variability in does delivery of each active, leading to poor bioavailability and limit clinical efficient. This result suggest that combination formulations require advanced quality and functionality of particles with suitable physicochemical properties. Hence, in order to production of binary and combination DPIs products, the aim of this study was to develop the spray drying and ultrasonic process for engineering of combination drug particles that will be delivered more efficiently and independently of dose variations to the lung. Microparticles were produced by spray drying or/and ultrasonic technique. The processing parameters and addition of excipients (polymers) were optimized using a full factorial design such that microparticles were produced in a narrow size range suitable for inhalation. Employing excipients resulted in high saturation environment leading to minimized sphere particles when compared to conventional solvent. Solid state characterization of microparticles using powder x-ray diffraction and differential scanning calorimetry indicated that the particles contained crystalline but no cocrystal. The combination particles comparable to or better than micronized drug when formulated as a powder blended with lactose. It was concluded that the use of HPMC enhanced crystallinity suitable for inhalation; and combination particles improved uniform distribution on the stage of NGI.

Crystal engineering study using spray dryer was performed for scale-up and rapid, continuous crystallisation of co-crystals from solution. The study emphasise on developing co-crystals of two structurally similar compounds, caffeine (CAF) and theophylline (THEO) with various di-carboxylic acids. The incongruently soluble pair of CAF and THEO with di-carboxylic acids acquires large solubility difference which is important to consider for its utility in product development. Based on previous assumption that maleic acid (MAL) elevates CAF’s solubility; solubility of the two similar compounds was tested in various dicarboxylic acids. Other solubility enhancement strategies such as introduction of surfactant and binary solvents were also scrutinised. A kinetically similar bench-scale technique, rotary evaporator (rotavap) was investigated as a pre-screening tool for the production of co-crystals via spray drying. Furthermore, various process parameters within the spray dryer were optimised to control the kinetic conditions which influence co-crystallisation and quality of the product. Another polymorphic co-crystal pair, CBZ (carbamazepine) and SAC (saccharin) was examined in various solvents and its degradation was evaluated over a period of few months. In this study, a two-step conversion of CBZ into its degradate was hypothesised. Rotavap delivered a true reflection of co-crystal favoured via spray drying apart from co-crystal pairs depicting polymorphism. Spray dryer offered a unique environment favouring metastable forms of co-crystals irrespective of the starting component stoichiometry; generating CAF:MAL 2:1. However, due to process limitation and solubility constraint, the impurity of CAF in CAF:MAL 2:1 co-crystals could not be abolished.

No / The FT Raman spectrum of caffeine was analysed along with that of its demethylated analogues, theobromine and theophylline. The similar but not identical structures of these three compounds allowed a more detailed assignment of the Raman bands. Noticeable differences in the Raman spectra of these compounds were apparent and key marker bands have been identified for the spectroscopic identification of these three compounds.

Trois dérivés d’amino acides sont reconnus d’une manière stéréo sélective par l’albumine du sérum bovin. Cette propriété a été observée dans le cas de la phosphatase alcaline de tissu non spécifique, (TNAP). Des inhibiteurs agissant à trois niveaux distincts sur les processus de minéralisation ont été cherchés: 1) TNAP ; 2) Formation de l’hydroxyapatite (HA); 3) Vésicules maticielles (VMs). Nous avons trouvé que des dérivés de benzothiophènes et de tétramisoles, solubles dans l’eau, sont des inhibiteurs spécifiques de TNAP. Un modèle qui permet de produire du HA, a été développé et a confirmé que les nucléotides sont des inhibiteurs de formation de HA. Nous avons montré que le médicament anti-rhumatisme sinomenine, n’ayant aucun effet sur le TNAP, ainsi que la théophylline ralentissaient tous les deux la formation de HA induits par les VMs. Ces modèles de minéralisation présentent un grand potentiel lors du criblage de médicaments pour le traitement de l’ostéoarthrose / Three amino acid derivatives were stereoselectively recognized by bovine serum albumin. Such property was also observed in the case of tissue non-specific alkaline phosphatase (TNAP), a marker in mineral formation. Inhibitors acting at three distinct levels on mineral formation were searched: 1) TNAP; 2) Hydroxyapatite (HA) formation; 3) Matrix vesicle (MV). We found that benzothiophene derivative of tetramisole are water soluble inhibitors of TNAP. A model producing HA as MVs was developed and served to screen HA inhibitors, confirming that several nucleotides inhibited HA formation. We demonstrated that the anti-rheumatic Chinese medicine sinomenine, having no effect on TNAP and theophylline, slowed down HA induced by MVs. The mineralization models presented a great potential to screen putative drugs to cure ostoarthritis.

The aim of this work is to study the in-vitro aerodynamic performance of a new inhaled theophylline formulation prepared by supercritical fluids technique. For the analysis of the output from the in-vitro tests (and further in-vivo tests) a new, fast, sensitive high performance liquid chromatographic (HPLC) method was developed and validated for the determination of theophylline and other related derivatives in aqueous and urine samples using new packing materials (monolithic columns). These columns achieve efficient separation under lower backpressure and shorter time comparing to other traditionally or newly introduced C18 columns. Solution enhanced dispersion by supercritical fluid (SEDS) process has been applied for the production of anhydrous theophylline as pure crystals in the range 2-5 μm to be used as new inhaled dry powder formulation for asthma. Fifteen theophylline samples have been prepared under different experimental conditions. The drug produced by this method has been subject to a number of solid-phase analytical procedures designed to establish the crystal structure [X-ray powder diffraction (XRPD)], the structure and conformation [(FTIR), Fourier-transform Raman spectroscopy (FT-Raman)], and the morphology and particle size [scanning electron microscope (SEM)]. While, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) have been used to monitor any phase transition or polymorphic changes after processing. All these analytical techniques gave a satisfactory indication of the solid-state chemistry of the processed particles and assess the development of new inhalation product. The performance of inhaled SEDS theophylline with or without a carrier was evaluated using the developed HPLC method. Three samples having different particle sizes were selected out of the prepared powders by SEDS technique to be tested. The dose sampling unit and the Anderson Cascade Impactor were used to determine the in-vitro emitted dose and the deposition profiles of SEDS samples, respectively. The effect of different inhalation flows was studied using two different flows 28.3, and 60 L min-1 with 4 L inhalation volume. Different DPI devices were investigated in this study; Easyhaler® and Spinhaler®. The particle size has an important effect on the aerodynamic behaviour and deposition profile of inhaled drug, the smaller the particles the greater the total lung deposition. The presence of a carrier improves the respirable fraction for all the tested formulations.

The objectives of this work are to characterize and model the solvent-mediated phase transformation process of theophylline anhydrous crystals to the monohydrate crystals in an aqueous system. In order to model the transformation, the following processes are taken into account: (1) the dissolution kinetics of theophylline anhydrous crystals, (2) the kinetics of the formation of theophylline monohydrate nuclei, and (3) the growth kinetics of the monohydrate crystals. The driving forces for the above processes are determined from the concentration of theophylline in the solution and the solubilities of theophylline anhydrous and monohydrate. The solubilities of theophylline anhydrous and the monohydrate, and these three distinct processes along with the overall transformation phenomena were investigated in the present study. By using theophylline as a model compound we have gained some understanding of the kinetics of the solvent-mediated phase transformation between the metastable anhydrous form and the stable hydrated form of an organic compound and we were able to model the transformation process. By identifying the mechanisms for nucleation, growth of the hydrate form and the dissolution of the anhydrous form one can predict and control the transformation process. The growth kinetics of thymine monohydrate crystals at various temperatures are also investigated in the present study.

No description available.

Thesis (M. Clin. Sc.)--University of Adelaide, 1985. / Includes bibliographical references (leaves 99-106).

Made available in DSpace on 2014-10-09T12:35:24Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:05:36Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP