No presente trabalho foi implementado um modelo matemático para simular o sistema antigelo eletrotérmico de um aerofólio. Por meio do programa ONERA2D simulou-se o escoamento potencial completo com velocidade 44,7 m/s (100 mph) e 89,4 m/s (200 mph) em torno de um aerofólio perfil NACA0012 de corda 0,914 m (3 pés) com ângulo de ataque de 0°, e calculou-se a eficiência de coleta local de gotículas de água com diâmetro mediano volumétrico de 20 μm. Foram simuladas quatro condições de teste com diferentes distribuições de fluxo de calor nos aquecedores elétricos do sistema antigelo. O modelo previu a distribuição de temperaturas na superfície sólida do aerofólio e no filme de água líquida, e as distribuições de fluxo de água líquida sobre a superfície do aerofólio (\"runback water\") e de coeficiente de transferência de calor por convecção de calor entre a superfície do aerofólio e o escoamento gasoso. Os resultados da simulação obtidos com o modelo foram comparados com resultados experimentais da NASA e os resultados numéricos dos programas LEWICE/ANTICE (EUA) e CANICE (Canada). Para as regiões molhadas pelo filme de água líquida, obteve-se um desvio máximo de temperatura de 2,6°C entre os resultados do presente modelo e o resultados experimentais. Para as regiões secas, onde não existe o filme de água líquida sobre a superfície do aerofólio, obteve-se um desvio de máximo de temperatura de 8°C. As previsões para distribuição de vazão de \"runback\", posição do término do filme de água líquida foram comparadas com os resultados do programa LEWICE/ANTICE. O modelo desenvolvido simula com adequada aproximação os efeitos da transferência de calor e de massa por convecção entre a superfície não-isotérmica do aerofólio ou do filme de água líquida e o escoamento gasoso, bem como os efeitos da transição entre o escoamento laminar e o turbulento na camada limite dinâmica e térmica e ainda a influência do escoamento do filme de água líquida sobre o desempenho do sistema de antigelo do aerofólio. / An electro-thermal anti-ice system was simulated with a mathematical model developed in the present work. A 44.7 m/s (100 mph) and 89.4 m/s (200 mph) full potential flow around a 0.914 m (3 ft) chord NACA0012 airfoil with 0° angle of attack and the local water catch efficiency of 20 μm median volumetric diameter droplets impingement were calculated by the numerical code ONERA2D. Four test conditions were simulated with four different heat flux distributions of the anti-ice system according to the experimental work developed at NASA. The model predicted distributions of solid surface and liquid water film temperatures, runback water flow and convection heat transfer coefficient between airfoil or water surface and gaseous flow. The simulated results obtained by the mathematical model developed were compared to NASA experimental results and the ones predicted by the numerical codes LEWICE/ANTICE (US) and CANICE (Canada). For the regions wetted by the water film, the present model provided 2.6°C maximum temperature deviations between the predicted results and experimental data. For the dry regions, where there is no liquid water on the airfoil surface, an 8°C maximum temperature deviation was obtained. The runback flow and water film ending point position were compared to LEWICE/ANTICE numerical results. The developed model predicts adequately the convection heat and mass transfer effects between the non-isothermal airfoil or liquid water film surface and the gaseous flow, as well the effects of laminar to turbulent flow transition within dynamic and thermal boundary layer and the influence of the liquid water film flow on the anti-ice system performance.

It is believed that the extremely hot European summer in 2003, where tens of thousands died in buildings, will become the norm by the 2040s, and hence there is the urgent need to accurately assess the risk that buildings pose. Thermal simulations based on warmer than typical years will be key to this. Unfortunately, the existing warmer than typical years, such as probabilistic Design Summer Years (pDSYs) are not robust measures due to their simple selection method, and can even be cooler than typical years. This study developed two new summer reference years: one (pHSY-1) is suitable for assessing the occurrence and severity of overheating while the other (pHSY-2) is appropriate for evaluating the thermal stress. Both have been proven to be more robust than the pDSYs. In addition, this study investigated the spatial variation in overheating driven by variability in building characteristics and the local environment. This variation had been ignored by previous studies, as most of them either created thermal models using building archetypes with little or no concern about the influence of local shading, or assumed little variation in climate across a landscape. For the first time, approximately a thousand more accurate thermal models were created for a UK city based on the remote measurement including building characteristics and their local shading. By producing overheating and mortality maps this study found that spatial variation in the risk of overheating was considerably higher due to the variability of vernacular forms, contexts and climates than previously thought, and that the heat-related mortality will be tripled by the 2050s if no building and human thermal adaptations are taken. Such maps would be useful to Governments when making cost-effective adaptation strategies against a warming climate.

Avec la généralisation de la construction des bâtiments basse consommation, passifs et à énergie positive, mais aussi la rénovation du parc existant, il est indispensable d’avoir recours à la simulation pour évaluer, entre autres, les performances énergétique et environnementale atteintes par ces nouveaux bâtiments. Les attentes en termes de garantie de performance énergétique étant de plus en plus importantes, il est primordial de s’assurer de la fiabilité des outils de simulation utilisés. En effet, les codes de simulation doivent être capables de représenter le comportement de ces nouveaux types de bâtiments de la façon la plus juste et fidèle possible. De plus, les incertitudes liées aussi bien aux paramètres de conception qu’aux différentes sollicitations ainsi qu’aux usages des bâtiments doivent être prises en compte pour pouvoir garantir la performance du bâtiment sur sa durée de vie.Cette thèse s’est intéressée à la validation expérimentale de modèles appliquée à un bâtiment de type cellule test. Cette méthodologie de validation se déroule en plusieurs étapes au cours desquelles on évalue la qualité du modèle en termes de justesse et de fidélité. Plusieurs cas d’études ont été menés sur lesquels nous avons pu identifier les paramètres les plus influents sur la sortie du modèle, examiner l’influence du pas de temps sur le processus de validation expérimentale, analyser l’influence de l’initialisation et confirmer l’aptitude de la méthodologie à tester le modèle. / Construction of low, passive and positive energy buildings is generalizing and existing buildings are being renovated. For this reason, it is essential to use simulation in order to estimate, among other things, energy and environmental performances reached by these new buildings. Expectations regarding guarantee of energy performance being more and more important, it is crucial to ensure the reliability of simulation tools being used. Indeed, simulation codes should reflect the behavior of these new kinds of buildings in the most consistent and accurate manner. Moreover, the uncertainty related to design parameters, as well as solicitations and building uses have to be taken into account in order to guarantee building energy performance during its lifetime.This thesis investigates the empirical validation of models applied to a test cell building. This validation process is divided into several steps, during which the quality of the model is evaluated as far as consistency and accuracy are concerned. Several study cases were carried out, from which we were able to identify the most influential parameters on model output, inspect the influence of time step on the empirical validation process, analyze the influence of initialization and confirm methodology’s ability to test the model.

In the residential and commercial buildings, most of the energy is used to provide the thermal comfort environment to the occupants. The recent research towards Green Buildings is focusing on reduction of energy consumption by air-conditioners and fans used for producing the thermal comfort environment. The thermal comfort is defined as the condition of mind which expresses human satisfaction with the thermal environment. The human body is continuously producing metabolic heat and it should be maintained within the narrow range of core temperature. The heat generated inside the body should be lost to the environment to maintain the thermal equilibrium with each other. The heat loss from the body is taking place in different modes such as conduction, convection, radiation and evaporation through the skin and respiration. These heat losses are influenced by the environmental factors (air temperature, air velocity, relative humidity and mean radiant temperature), physiological factors (activity level, posture and sweat rate) and clothing factors (thermal insulation value, evaporative resistance and microenvironment volume). When the body is in thermally equilibrium with its surrounding environment, the heat production should be equal to heat loss to maintain the thermal comfort. The level of thermal comfort can be measured by the different indices which combine many parameters. Of these, the Fanger’s PMV (Predicted Mean Vote) – PPD (Percentage of People Dissatisfied) index was universally suggested by ASHRAE and ISO. The PMV – PPD index was derived based on the experiment conducted on acclimated European and American subjects. Many researchers have criticized that the PMV – PPD index is not valid for tropical regions and some researchers have well agreed with this index for the same region. The validation of PMV – PPD index for thermal comfort Indians has not yet been examined. The validation of PMV – PPD index can be done by the human heat balance experiment and the individual heat losses have to be calculated from the measured parameters. In the human heat balance, the convective heat transfer plays the major role when the air movement exists around the human body. The convective heat loss is dependent on the convective heat transfer coefficient which is the function of the driving force of the convection. Using Computational Fluid Dynamics techniques, an attempt has been made in this work to determine the convective heat transfer coefficient of the human body at standing posture in natural convection. The CFD technique has been used to analyze the heat and fluid flow around the human body as follows: The anthropometric digital human manikin was modeled in GAMBIT with a test room. This model was meshed by tetrahedral elements and exported to FLUENT software to perform the analysis. The simulation was done at different ambient temperatures (16 oC to 32 oC with increment of 2 oC). The Boussinesq approximation was used to simulate the natural convection and the Surface to Surface model was used to simulate the radiation. The surrounding wall temperature was assigned equal to the ambient temperature. The sum of convective and radiative heat losses calculated based on the ASHRAE model was set as heat flux from the manikin’s surface. From the simulation, the local skin temperatures have been taken, and the temperature and velocity distributions analyzed. The result shows that the skin temperature is increasing with an increase in ambient temperature and the thickness of the hydrodynamic and thermodynamic boundary layers is increasing with height of the manikin. From the Nusselt number analogy, the convective heat transfer coefficients of the individual manikin’s segments have been calculated and the relation with respect to the temperature differences has been derived by the regression analysis. The relation obtained for the convective heat transfer coefficient has been validated with previous experimental results cited in literature for the same conditions. The result shows that the present relation agrees well with the previous experimental relations. The characteristics of the human thermal plume have been studied and the velocity of this plume is found to increase with the ambient temperature. Using the Grashof number, the flow around the human manikin has been examined and it is observed to be laminar up to abdomen level and turbulent from shoulder level. In between these two levels, the flow is found to be in transition. The validation of PMV model for tropical countries, especially for Indians, was done by heat balance experiment on Indian subjects. The experiment was conducted on forty male subjects at different ambient temperatures in a closed room in which low air movement exists. The local skin temperature, relative humidity, air velocity and globe temperature were measured. The sensation vote was received from all the subjects at all the conditions. The convective heat loss was calculated from its coefficient obtained from the present computational simulation. The radiation heat loss was calculated for two cases: In case one, the mean radiant temperature was taken equal to the ambient temperature and in case two, the mean radiant temperature was calculated from the globe temperature. The other heat losses were calculated from the basic formulae and the relations given by ASHRAE based on Fanger’s assumption. From these calculations, the validity of the Fanger’s assumption was examined. The collected sensation votes and the calculated PMV were compared to validate the PMV – PPD index for Indians. The experimental results show that there was much variation in the calculated comfort level using the measured parameters and the Fanger’s assumption. For the case of mean radiant temperature equal to the ambient temperature for indoor condition, the comfort level was varying more than the actual. In addition, the calculated comfort level from the globe temperature agreed well with the comfort level from the collected sensation votes. So it was concluded that the ASHRAE model is valid for Indians if the radiation was measured exactly. Using the ASHRAE model, the required wall emissivity of the surrounding wall at different ambient temperatures was determined from the CFD simulation. In the ASHRAE model, the surrounding wall emissivity plays the major role in the radiative heat loss from the human body. Hence in recent years, research on low emissive wall paints is focused. The computational study was done to determine the required wall emissivity to obtain the thermal comfort of the occupant at low energy consumption. The simulation was done with the different ambient temperatures (16 oC to 40 oC with increment of 4 oC) with the different surrounding wall emissivity (0.0 to 1.0 with increment of 0.2). From this simulation, the change in mean skin temperature with respect to wall emissivity was obtained for all ambient temperature conditions. The required mean skin temperature for a particular activity level was compared with the simulation results and from that, the required wall emissivity at the different ambient conditions was determined. If the surrounding walls are having the required emissivity, it leads to decrease in heat/cold strain on the human body, and the thermal comfort can be obtained with low energy consumption.(please note that title in the CD is given as COMPUTATION OF REQUIRED WALL EMISSIVITY FOR LOW ENERGY CONSUMPTION IN BUILDINGS USING ASHRAE MODEL VALIDATED FOR INDIAN THERMAL COMFORT)

Dans les pays importateurs d’énergie de la région Est-Méditerranée, comme la Syrie et le Liban, le secteur du bâtiment est le plus gros consommateur d’énergie. Une extension urbaine dynamique et une croissance démographique importante sont les caractéristiques des villes côtières de cette région, avec une absence totale d’application de règlements thermiques ou énergétiques pour les constructions. L’objectif de ce travail est de mettre en place une certification énergétique pour les bâtiments résidentiels neufs dans la région côtière de l’Est-Méditerranée. Pour atteindre cet objectif, nous avons réalisé une série d’enquêtes sur le terrain pour mettre en évidence les problématiques énergétiques des bâtiments résidentiels dans la ville de Tartous, et établir une base de données servant de référentiel sur les modes de construction, les systèmes énergétiques accessibles et les usages des occupants. Le choix de la RT2012 est le résultat d’une analyse critique et comparative des six labels les plus répandus dans le monde, en vue d’une extension à la région Est-Méditerranée. L’originalité de notre travail est d’aborder la réalité du terrain en adoptant un outil de STD et en nous appuyant sur les spécificités de fonctionnement et d’usage du bâtiment et ses équipements de chauffage, de climatisation, d’eau chaude sanitaire et d’électroménager. Les limites d’amélioration de la performance énergétique, due à l’utilisation des solutions techniques accessibles sur le site, avec un valorisation globale des points de vue énergétique, économique et de confort, nous permettront de déterminer les nouvelles valeurs des indices réglementaires caractérisant notre nouveau label énergétique RT2012-EM. Ce label énergétique, destiné aux différents acteurs du bâtiment pour la conception de bâtiments résidentiels neufs, vise à promouvoir une politique d’utilisation rationnelle de l’énergie, grâce à des bâtiments à basse consommation énergétique. / In the countries which importing energy in the region of the East-Mediterranean, such as Syria and Lebanon, the building sector is the largest consumer of energy . A dynamic urban expansion and population growth are important characteristics of the coastal towns of this region, with a total lack of application of heat or energy regulations for buildings. The objective of this work is to develop an energy certification for new residential buildings in the coastal region of East Mediterranean. To achieve this goal, we conducted a series of field surveys to highlight energy issues of residential buildings in the city of Tartous, and establish a database for the repository construction methods, energy systems access and usage of the occupants. The choice of the RT2012 is the result of a critical and comparative analysis of the six most popular labels in the world, for an extension to the East Mediterranean region. The originality of our work is to address the reality of the field by adopting a tool of a dynamic thermal simulation and relying on the specific operation and use of the building and equipment of heating, cooling, hot water and appliances. The limits of improving energy performance, due to the use of available technical solutions on site, with a total valuation of viewpoints energy, economic and comfort, will let us determine the new values ​​of the regulatory indices of our new RT2012-EM energy label. The energy label for the different actors of the building to the design of new residential buildings, designed to promote a policy of rational use of energy, through buildings with low energy consumption.

The South African economy, which is largely based on heavy industry such as minerals extraction and processing, is by nature very energy intensive. Based on the abundance of coal resources, electricity in South Africa remains amongst the cheapest in the world. Whilst the low electricity price has contributed towards a competitive position, it has also meant that our existing electricity supply is often taken for granted. The economic and environmental benefits of energy efficiency have been well documented. Worldwide, nations are beginning to face up to the challenge of sustainable energy - in other words to alter the way that energy is utilised so that social, environmental and economic aims of sustainable development are supported. South Africa as a developing nation recognises the need for energy efficiency, as it is the most cost effective way of meeting the demands of sustainable development. South Africa, with its unique economic, environmental and social challenges, stands to benefit the most from implementing energy efficiency practices. The Energy Efficiency Strategy for South Africa takes its mandate from the South African White Paper on Energy Policy. It is the first consolidated governmental effort geared towards energy efficiency practices throughout South Africa. The strategy allows for the immediate implementation of low-cost and no-cost interventions, as well as those higher-cost measures with short payback periods. An initial target has been set for an across sector energy efficiency improvement of 12% by 2014. Thermal and energy system simulation is globally recognised as one of the most effective and powerful tools to improve overall energy efficiency. However, because of the usual extreme mathematical nature of most simulation algorithms, coupled with the historically academic environment in which most simulation software is developed, valid perceptions exist that system simulation is too time consuming and cumbersome. It is also commonly known that system simulation is only effective in the hands of highly skilled operators, which are specialists in their prospective fields. Through previous work done in the field, and the design of a dynamic thermal and energy system simulation scheme for cross industry applications, it was shown that system simulation has evolved to such an extent that these perceptions are not valid any more. The South African mining and commercial building industries are two of the major consumers of electricity within South Africa. By improving energy efficiency practices within the building and mining industry, large savings can be realised. An extensive investigation of the literature showed that no general suitable computer simulation software for cross industry mining and building thermal and energy system simulation could be found. Because the heating, ventilation and air conditioning (HVAC) of buildings, closely relate to the ventilation and cooling systems of mines, valuable knowledge from this field was used to identify the requirements and specifications for the design of a new single cross industry dynamic integrated thermal and energy system simulation tool. VISUALQEC was designed and implemented to comply with the needs and requirements identified. A new explicit system component model and explicit system simulation engine, combined with a new improved simulation of mass flow through a system procedure, suggested a marked improvement on overall simulation stability, efficiency and speed. The commercial usability of the new simulation tool was verified for building applications by doing an extensive building energy savings audit. The new simulation tool was further verified by simulating the ventilation and cooling (VC) and underground pumping system of a typical South African gold mine. Initial results proved satisfactory but, more case studies to further verify the accuracy of the implemented cross industry thermal and energy system simulation tool are needed. Because of the stable nature of the new VISUALQEC simulation engine, the power of the simulation process can be further extended to the mathematical optimisation of various system variables. In conclusion, this study highlighted the need for new simulation procedures and system designs for the successful implementation and creation of a single dynamic thermal and energy system simulation tool for cross industry applications. South Africa should take full advantage of the power of thermal and energy system simulation towards creating a more energy efficient society. / Thesis (Ph.D. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2005.

The South African economy, which is largely based on heavy industry such as minerals extraction and processing, is by nature very energy intensive. Based on the abundance of coal resources, electricity in South Africa remains amongst the cheapest in the world. Whilst the low electricity price has contributed towards a competitive position, it has also meant that our existing electricity supply is often taken for granted. The economic and environmental benefits of energy efficiency have been well documented. Worldwide, nations are beginning to face up to the challenge of sustainable energy - in other words to alter the way that energy is utilised so that social, environmental and economic aims of sustainable development are supported. South Africa as a developing nation recognises the need for energy efficiency, as it is the most cost effective way of meeting the demands of sustainable development. South Africa, with its unique economic, environmental and social challenges, stands to benefit the most from implementing energy efficiency practices. The Energy Efficiency Strategy for South Africa takes its mandate from the South African White Paper on Energy Policy. It is the first consolidated governmental effort geared towards energy efficiency practices throughout South Africa. The strategy allows for the immediate implementation of low-cost and no-cost interventions, as well as those higher-cost measures with short payback periods. An initial target has been set for an across sector energy efficiency improvement of 12% by 2014. Thermal and energy system simulation is globally recognised as one of the most effective and powerful tools to improve overall energy efficiency. However, because of the usual extreme mathematical nature of most simulation algorithms, coupled with the historically academic environment in which most simulation software is developed, valid perceptions exist that system simulation is too time consuming and cumbersome. It is also commonly known that system simulation is only effective in the hands of highly skilled operators, which are specialists in their prospective fields. Through previous work done in the field, and the design of a dynamic thermal and energy system simulation scheme for cross industry applications, it was shown that system simulation has evolved to such an extent that these perceptions are not valid any more. The South African mining and commercial building industries are two of the major consumers of electricity within South Africa. By improving energy efficiency practices within the building and mining industry, large savings can be realised. An extensive investigation of the literature showed that no general suitable computer simulation software for cross industry mining and building thermal and energy system simulation could be found. Because the heating, ventilation and air conditioning (HVAC) of buildings, closely relate to the ventilation and cooling systems of mines, valuable knowledge from this field was used to identify the requirements and specifications for the design of a new single cross industry dynamic integrated thermal and energy system simulation tool. VISUALQEC was designed and implemented to comply with the needs and requirements identified. A new explicit system component model and explicit system simulation engine, combined with a new improved simulation of mass flow through a system procedure, suggested a marked improvement on overall simulation stability, efficiency and speed. The commercial usability of the new simulation tool was verified for building applications by doing an extensive building energy savings audit. The new simulation tool was further verified by simulating the ventilation and cooling (VC) and underground pumping system of a typical South African gold mine. Initial results proved satisfactory but, more case studies to further verify the accuracy of the implemented cross industry thermal and energy system simulation tool are needed. Because of the stable nature of the new VISUALQEC simulation engine, the power of the simulation process can be further extended to the mathematical optimisation of various system variables. In conclusion, this study highlighted the need for new simulation procedures and system designs for the successful implementation and creation of a single dynamic thermal and energy system simulation tool for cross industry applications. South Africa should take full advantage of the power of thermal and energy system simulation towards creating a more energy efficient society. / Thesis (Ph.D. (Mechanical Engineering))--North-West University, Potchefstroom Campus, 2005.

Cette thèse porte sur la construction de modèles de substitution en régimes transitoire et permanent pour la simulation thermique, en présence de peu d'observations et de plusieurs sorties.Nous proposons dans un premier temps une construction robuste de perceptron multicouche bouclé afin d'approcher une dynamique spatio-temporelle. Ce modèle de substitution s'obtient par une moyennisation de réseaux de neurones issus d'une procédure de validation croisée, dont le partitionnement des observations associé permet d'ajuster les paramètres de chacun de ces modèles sur une base de test sans perte d'information. De plus, la construction d'un tel perceptron bouclé peut être distribuée selon ses sorties. Cette construction est appliquée à la modélisation de l'évolution temporelle de la température en différents points d'une armoire aéronautique.Nous proposons dans un deuxième temps une agrégation de modèles par processus gaussien dans un cadre multifidélité où nous disposons d'un modèle d'observation haute-fidélité complété par plusieurs modèles d'observation de fidélités moindres et non comparables. Une attention particulière est portée sur la spécification des tendances et coefficients d'ajustement présents dans ces modèles. Les différents krigeages et co-krigeages sont assemblés selon une partition ou un mélange pondéré en se basant sur une mesure de robustesse aux points du plan d'expériences les plus fiables. Cette approche est employée pour modéliser la température en différents points de l'armoire en régime permanent.Nous proposons dans un dernier temps un critère pénalisé pour le problème de la régression hétéroscédastique. Cet outil est développé dans le cadre des estimateurs par projection et appliqué au cas particulier des ondelettes de Haar. Nous accompagnons ces résultats théoriques de résultats numériques pour un problème tenant compte de différentes spécifications du bruit et de possibles dépendances dans les observations. / This PhD thesis deals with the construction of surrogate models in transient and steady states in the context of thermal simulation, with a few observations and many outputs.First, we design a robust construction of recurrent multilayer perceptron so as to approach a spatio-temporal dynamic. We use an average of neural networks resulting from a cross-validation procedure, whose associated data splitting allows to adjust the parameters of these models thanks to a test set without any information loss. Moreover, the construction of this perceptron can be distributed according to its outputs. This construction is applied to the modelling of the temporal evolution of the temperature at different points of an aeronautical equipment.Then, we proposed a mixture of Gaussian process models in a multifidelity framework where we have a high-fidelity observation model completed by many observation models with lower and no comparable fidelities. A particular attention is paid to the specifications of trends and adjustement coefficients present in these models. Different kriging and co-krigings models are put together according to a partition or a weighted aggregation based on a robustness measure associated to the most reliable design points. This approach is used in order to model the temperature at different points of the equipment in steady state.Finally, we propose a penalized criterion for the problem of heteroscedastic regression. This tool is build in the case of projection estimators and applied with the Haar wavelet. We also give some numerical results for different noise specifications and possible dependencies in the observations.

Additive manufacturing (AM) is a quickly rising method of manufacturing due to its ability to increase design freedom. This allows the manufacturing of components not possible by traditional subtractive manufacturing. AM can greatly reduce lead time and material waste, therefore decreasing the cost and environmental impact. The adoption of AM in the aerospace industry requires strict control and predictability of the material deposition to ensure safe flights.  The method of AM for this thesis is Laser Metal Deposition with wire (LMD-w). Using wire as a feedstock introduces a potential problem, the material transfer from the wire to the substrate. This requires all process parameters to be in balance to produce a stable deposition. The first sign of unbalanced process parameters are the material transfer stabilities; stubbing and dripping. Stubbing occurs when the energy to melt the wire is too low and the wire melts slower than required. Dripping occurs when too much energy is applied and the wire melts earlier than required.  These two reduce the predictability and stability that is required for robust manufacturing.  Therefore, the use of thermal simulations to predict the material transfer stability for LMD-w using Waspaloy as the deposition material has been studied.  It has been shown that it is possible to predict the material transfer stability using thermal simulations and criterions based on preexisting experimental data. The criterion for stubbing checks if the completed simulation result produces a wire that ends below the melt pool. For dripping two criterions shows good results, the dilution ratio is a good predictor if the tool elevation remains constant. If there is a change in tool elevation the dimensionless slenderness number is a better predictor.  Using these predictive criterions it is possible to qualitatively map the process window and better understand the influence of tool elevation and the cross-section of the deposited material. / Additiv tillverkning (AT) är en kraftigt växande tillverkningsmetod på grund av sin flexibilitet kring design och möjligheten att skapa komponenter som inte är tillverkningsbara med traditionell avverkande bearbetning.  AT kan kraftigt minska tid- och materialåtgång och på så sett minskas kostnader och miljöpåverkan. Införandet av AT i flyg- och rymdindustrin kräver strikt kontroll och förutsägbarhet av processen för att försäkra sig om säkra flygningar.  Lasermetalldeponering av tråd är den AT metod som hanteras i denna uppsats. Användandet av tråd som tillsatsmaterial skapar ett potentiellt problem, materialöverföringen från tråden till substratet. Detta kräver att alla processparametrar är i balans för att få en jämn materialöverföring. Är processen inte balanserad syns detta genom materialöverföringsstabiliteterna stubbning och droppning. Stubbning uppkommer då energin som tillförs på tråden är för låg och droppning uppkommer då energin som tillförs är för hög jämfört med vad som krävs för en stabil process. Dessa två fenomen minskar möjligheterna för en kontrollerbar och stabil tillverkning.  På grund av detta har användandet utav termiska simuleringar för att prediktera materialöverföringsstabiliteten för lasermetalldeponering av tråd med Waspaloy som deponeringsmaterial undersökts. Det har visat sig vara möjligt att prediktera materialöverföringsstabiliteten med användning av termiska simuleringar och kriterier baserat på tidigare experimentell data. Kriteriet för stubbning kontrolleras om en slutförd simulering resulterar i en tråd som når under smältan.  För droppning finns två fungerande kriterier, förhållandet mellan svetshöjd och penetrationsdjup om verktygshöjden är konstant, sker förändringar i verktygshöjden är det dimensionslös ”slenderness” talet ett bättre kriterium.  Genom att använda dessa kriterier är det möjligt att kvalitativt kartlägga processfönstret och skapa en bättre förståelse för förhållandet mellan verktygshöjden och den deponerade tvärsnittsarean.

The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. The second part deals with the theoretical description of forms of heat transfer. The third part of the thesis deals with the design of an equivalent thermal circuit model of a linear iron-core linear motor with permanent magnet. Hereafter, the proposed design will be used to calculate the temperatures of the individual motor units. The temperatures are later compared with the results obtained with finite element method.