No description available.

Volcanic and magmatic processes are controlled by the composition of the magmas involved and the nature and structure of their underlying plumbing systems. To understand and predict volcanic behaviour, it is of critical importance to characterize the associated magmatic plumbing and supply system. This study investigates the magma plumbing system beneath Bali, Indonesia by employing several thermobarometric models using mineral phases in lavas from the simultaneous eruptions of Agung and Batur volcanoes in 1963 and the 1974 eruption of Batur. Compositional data were acquired from feldspar, pyroxene, and olivine crystals, using electron microprobe analysis, as well as from whole-rock samples using inductively coupled plasma mass spectrometry. Clinopyroxene-melt and clinopyroxene composition thermobarometers were then applied to equilibrated clinopyroxene-melt couples, while plagioclase-melt thermobarometry was employed on equilibrated plagioclase-melt pairs. The results were used to construct comprehensive magmatic plumbing models for Agung and Batur and are compared with geochemical, geophysical and petrological data on these volcanoes and others in the region. For the 1963 Agung eruption, results from clinopyroxene-melt thermobarometry suggest dominant crystallisation levels between 18 and 22 km depth. Clinopyroxene from the 1963 eruption of Batur record crystallisation depths between 12 and 18 km, whereas clinopyroxene from the 1974 Batur eruption show a main crystallisation level between 15 and 19 km. Furthermore, plagioclase-melt thermobarometry indicates the existence of shallow level magma reservoirs, with depths between 3 and 7 km for the 1963 eruption of Agung, between 2 and 4 km for the 1963 Batur eruption and between 3 and 5 km for the 1974 Batur event. The deep magma storage regions notably coincide with lithological boundaries in the crust and mantle beneath Bali, while the shallow reservoirs are consistent with recent geophysical studies that point to regional shallow-level magma storage. An along-arc comparison reveals this trend to be characteristic of Sunda arc magma storage systems and highlights the utility of a thermobarometric approach to detect multi-level systems beneath recently active volcanic systems.

The study of magmatic processes and their location in the crustal profile is fundamental for the understanding of the volcanic systems and their associated hazards. Changes and continuities in magma storage zones, fractional crystallization and crustal contamination are studied over a time span of 300 ka in Puyehue Volcano in the Southern Volcanic Zone, Chile. Using thermobarometric models outlined in Putirka (2008), bulk assimilationand fractional crystallization modelling this study show that: a) fractional crystallization of plagioclase and clinopyroxene in Puyehue Volcano occurs in the upper 20 km of the crust with plagioclase preceding clinopyroxene in the crystallization sequence, b) fractional crystallization of basaltic andesites is dominated by plagioclase with a break in th e geochemical trend at around 55 wt% SiO2caused by an increased share of pyroxene fractionation and the onset of significant magnetite fractionation, c) both old and young Puyehue volcanics are contaminated by a gabbroic lithology of the lower crust as suggested previously by Jicha et al. (2007) and d) the Anticura Group lavas and a single Puyehue Volcano sample reflect magma-metasediment interaction with likely in the middle to upper crust. / El estudio de los procesos magmáticos y su ubicación en el perfil de la corteza terrestre es fundamental para la comprensión de los sistemas volcánicos y sus riesgos asociados. Cambios y continuidades en las zonas de almacenamiento de magma, cristalización fraccionada y contaminación cortical correspondientes a un lapso de 300 ka se estudiaronen Volcán Puyehue en la Zona Volcánica Sur, Chile. Utilizando modelos termobarométricos descritos en Putirka (2008) más un modelamiento de la asimilación y cristalización fraccionada este estudio muestra que: a) la cristalización fraccionada de plagioclasa y clinopiroxeno en el Volcán Puyehue se produce en los 20 Km superiores de la corteza y que la plagioclasa precede al clinopiroxeno en la secuencia de cristalización, b) la cristalización fraccionada de andesitas basálticas está dominada por plagioclasa con un quiebre en la tendencias geoquímicas en torno al 55 wt%SiO2causado por un aumento relativo delfraccionamiento piroxeno y ael comienzo de un fraccionamiento significativo de magnetita, c) las rocas volcánicas del Volcán Puyehue, tanto lasantiguas como las recientes, están contaminadas por una litología de gabro de la corteza inferior como se ha sugeridoanteriormente por Jicha et al. (2007) y d) las lavas del Grupo Anticura además de una sola muestra Volcán Puyehue evidencian interacción entre magma y metasedimentos que probablemente ocurrió en la corteza media o superior / Studiet av magmatiska processer och deras placering i jordskorpans profil är väsenlig för förståelsen av den vulkaniska system och dithörande risker. I denna studie granskas förändringar och kontinuiteter i lagringszoner för magma, fraktionerad kristallisation och jordskorpsföroreningar över en tidsperiod på 3 00 ka i Puyehue vulkan i den Södra Vulkaniska Zonen, Chile. Till denna ändamål användes termobarometriska modeller beskrivna i Putirka (2008) och andra modeller för assimilering och fraktionerad kristallisation som visar att: a) fraktionerad kristallisation av plagioklas och klinopyroxen i Puyehue vulkanen sker i de övre 20 km av jordskorpan och att plagioklas föregår clinopyroxene i kristallisations följden, b) fraktionerad kristallisering av andesitiska basalterförhärskas av plagioklas samt att den geokemiska utvecklingen förändras omkring 55 wt% SiO2på grund av en ökad fraktioneringsandel av pyroxen plus uppkomsten av betydande magnetit fraktionering, c) både gamla och unga Puyehue vulkaniter är förorenade av ett gabbroisk litologi från den undre kontinentalskorpanså som detföreslagits tidigare av Jicha et al. (2007) och d) Anticura Group lavornasamt ett enda Puyehue-prov reflekterar magma-metasediment interaktion som sannolikt sker i mitten eller övre delenav kontinentalskorpan.

The Atascosa Lookout lava flow is a mid-Tertiary trachyandesite flow that caps the rhyolitic to dacitic volcanic sequence exposed in the Atascosa Mountains of southern Arizona. The flow erupted near the beginning of extension in the southern Basin and Range following the floundering of the Farallon plate and during the development of the San Andreas fault. The flow hosts a variety of disequilibrium crystals and textures including resorbed and overgrown feldspar phenocrysts with inclusion-rich zones, quartz-bearing enclaves, and clusters of plagioclase +/- chromium diopside, magnesian augite, quartz, hornblende, and orthopyroxene crystals and envelopes of contrasting composition with both the groundmass and the enclaves. Current evidence suggests that magma generation and differentiation commonly take place mainly in the lower crust and batches of magma are emplaced and equilibrate across a range of crustal levels. Crystallization depths and temperatures of various phases in the flow were obtained with new and revised geothermometers and geobarometers to examine the petrogenesis of the lava flow. Major elements of parental melts for most of the mineral phases were estimated using thermobarometry equilibrium tests and rare earth and trace element concentrations of parental melts of hornblendes and clinopyroxenes were calculated using known partition coefficients elements. Thermobarometry shows distinct ranges of temperatures and pressures for each component of the flow and calculated parental melts of various phases are distinct from one another. Orthopyroxenes crystallized at depths greater than 25 km, at the highest temperatures from the most mafic parent, estimated to be a picro-basalt. Clinopyroxenes crystallized at 11.5 – 30 km, lower temperatures and a more evolved parent of basalt or trachybasalt composition. Plagioclase crystallized throughout the crust from a range of intermediate melts and hornblendes crystallized 12 – 13 km from a parental melt similar in composition to the groundmass. This study demonstrates the lava flow hosts minerals that crystallized from different parent melts at various crustal levels. Extension and previous magmatism provided a rapid path for magma to ascend, subduing crustal assimilation and enhancing the probability of a diverse crystal cargo that retains the record of the plumbing system beneath a volcanic complex.

In the Karnali valley of west Nepal, detailed mapping, thermobarometry, quartz-petrofabrics, vorticity analysis, and thermochronology delineate three tectonometamorphic domains separated by structural and metamorphic discontinuities. The lowest domain, the Lesser Himalayan sequence, is weakly metamorphosed and preserves evidence of primary sedimentary features and a polydeformational history. The Greater Himalayan sequence (GHS) is pervasively sheared and metamorphosed and overlies the Lesser Himalayan sequence along the Main Central thrust. The Greater Himalayan sequence is sub-divided into two tectonometamorphic domains that display contrasting metamorphic histories. The lower portion of the Greater Himalayan sequence contains garnet- to kyanite-grade rocks whose peak metamorphic assemblages developed during top-to-the-south directed shear and a metamorphic pressure gradient that increases up structural section. The upper portion of the Greater Himalayan sequence contains kyanite and sillimanite-grade migmatites that preserve polymetamorphic assemblages and a metamorphic pressure gradient that decreases up structural section. The upper and lower portions of the Greater Himalayan sequence are separated by a metamorphic discontinuity that roughly coincides with the bottom of the lowest migmatite unit. Vorticity estimates indicate roughly equal contributions of pure and simple shear during deformation of the upper and lower portions of the GHS. Quartz petrofabrics suggest deformation temperatures are equivalent to peak metamorphic temperatures in the lower Greater Himalayan sequence. These observations are consistent with channel flow tectonic models whereby the upper portion of the Greater Himalayan sequence is ductily extruded to the south while ductily accreting the subjacent lower portion of the Greater Himalayan sequence across a metamorphic discontinuity. 40Ar/39Ar thermochronology indicates Miocene homogeneous cooling of the Greater Himalayan sequence. Cooling rates of the GHS and the homogeneous cooling profile suggest east-west extensional exhumation followed peak-metamorphism and south-directed shearing and supports the hypothesis of the southeast propagation of the Gurla-Mandhata-Humla fault system into the Karnali valley. / Thesis (Master, Geological Sciences & Geological Engineering) -- Queen's University, 2010-09-20 09:23:07.103

Crustal faulting has long been known as the source of shallow seismicity, and the seismogenic zone is the depth (3-15 km) within the crust that is capable of co-seismic slip, largely under brittle conditions. However, some continental seismicity occurs at depths >> 15 km. I performed thermobarometry of mylonitic pseudotachylyte to determine the P-T of a seismogenic extensional fault in the Caledonian Norwegian margin. Two shear zones (Eidsfjord and Fiskfjord) located in northern Norway exhibit brittle extension propagating into the ductile regime of the lower crust as evidenced by the presence of pseudotachylyte. Averages from Eidsfjord (653 ± 38°C and 570 ± 115 MPa) and Fiskfjord (680 ± 70°C and 1121 ± 219 MPa) correspond to depths of co-seismic slip of 21 ±4 km and 41 ± 9 km, respectively. These depths are 5-25 km below the depth of the standard seismogenic zone in mature fault systems, and require another mechanism (e.g. dynamic downward rupture, unusually high shear stresses) to account for seismogenic rupture at such depths. Assuming Eidsfjord and Fiskfjord were uplifted at the same time, and considering they are currently at the same crustal level, Fiskfjord was uplifted a greater amount and at a faster rate as it was initially located at a greater crustal depth.

A young marine island called Heard Island is located in the southern Kerguelen Plateau in the Indian Ocean, a large igneous province created by the Kerguelen mantle plume. The two major geographic regions on Heard Island have two principal volcano-magmatic suites. Basanites, alkali basalts, and trachybasalts make up one group, the Big Ben Series (BBS), while basanitic to trachytic rocks make up the Laurens Peninsula Series (LPS). The most recent eruption at Big Ben volcano occurred in October 2022. To better understand magma evolution in the underlying plumbing system, clinopyroxene, feldspar, and olivine, mineral chemistry, clinopyroxene thermobarometry, and olivine thermometry were used.      The main phenocrysts from Heard Island are olivine, clinopyroxene, and feldspar. All phenocrysts share the characteristics of sieve textures and fractures. The mineral chemistry of clinopyroxene, zonation, and variation of core and rim of Mg#, Al2O3, TiO2, and Cr2O3, provides insight into the magmatic evolution of magma. Results from clinopyroxene-liquid thermobarometry suggest that clinopyroxene crystallization occurs at depths of 1 to 39 km for the cores and 1 to 47 km for the rims, with corresponding temperatures of 1098 to 1208°C and 1099 to 1254°C respectively. Comparison with olivine thermometry shows concordance in temperature estimates. The Mohorovičić discontinuity, or Moho, which marks the boundary between the Earth's crust and mantle, is believed to lie between 18 and 26 km deep at Heard Island. This study suggests that magma pockets can be found below the Moho between 51 and 18 km, and in the upper and lower crust between 18 and 2 km. Additionally, the density difference between various crustal layers determines where magma storage is located. The evidence from petrology and geochemistry points to common processes of magma mixing, recharge, and fractional crystallization during magma evolution.

The volcanic island of Fogo belongs to the Cape Verde archipelago, a two-tiered chain of islands situated 500 km west of the African coast. Fogo is regarded as one of the most active volcanoes in the world with 10 eruptions during the last 250 years. The former shield volcano Monte Amarelo reached 3500 m.a.s.l. before it collapsed into the Atlantic Ocean. The massive landslide event occurred between 124 and 86 ka, forming the Bordeira cliffs and the high plateau Cha das Caldeiras on Fogo. We have collected rock samples from the Bordeira dikes, which intruded into the Bordeira wall prior to collapse. The purpose of the project is to produce a magmatic storage model for Fogo using mineral chemistry and thermobarometric methods. Additionally, I aim to determine the processes prevailing in the magmatic system, the link between the volcanic and plutonic system. Previous studies on the magma storage beneath Fogo have focused on the volcanics, which show crystallization pressures between 0.45 to 0.68 GPa using clinopyroxene-melt thermobarometry on rims. The Bordeira dikes are basanitic to nephelinitic in composition. The mineral assemblage of the 20 dike samples consist of phenocrystic clinopyroxene ± olivine ± plagioclase ± xenocrystic amphibole. Accessory minerals are titanomagnetite, apatite, nepheline, plagioclase and alkali feldspar in a microcrystalline groundmass. Clinopyroxene displays a large compositional variation, ranging from Mg#38 to Mg#85, with a mean of Mg#71±10 2s.d. (n=614). Xenocrystic amphibole varies from Mg#37 to Mg#72, with a mean of Mg#62±15 2s.d. (n=78). Interstitial feldspar forms two groups, one of An#24 to An#79, with a mean of An#66±19 2s.d., (n=125) and a second with Or#19 to 100 with a mean of Or#69±42 2s.d.(n=71). Bulk geochemistry of the 20 samples range from 1.82 to 11.5 MgO wt%. Our clinopyroxene-melt thermobarometry show crystallization pressures ranging from 0.02 to 0.85 GPa, with a mean of 0.47±0.29 2s.d. (n=502) (Putirka et al. 2003). Structural data from the intrusive dikes in the Bordeira contain three preferred orientations, N-S, NW-SE and E-W (n=371). The main process occurring in the magmatic system is fractional crystallization, however there is some evidence for phenocryst accumulation and magma recharge. Our magma storage model show that clinopyroxene crystallization initiates in the lithospheric mantle, between 15 to 28 km depth. Significant clinopyroxene rim and microcryst crystallization occur above Moho, between 9 to 12 km, implying that magma storage levels do exist in the oceanic crust. The intrusive and extrusive rocks present on Fogo show common storage levels, suggesting that they are formed in the same system but the difference being their residence time in the crustal level storage. Our structural data and 3D model suggest that the Monte Amarelo rift zone was composed of three components, being oriented NW-SE, N-NE and E-W. The flank collapse was caused by dike intrusions of N-S orientation which enabled a E-W extension of the shield volcano. / Vulkanön Fogo är en del av ögruppen Kap Verde i Atlanten. Ögruppen bildar en två delad arkipelag positionerad 500 km väster om det afrikanska fastlandet. Ön, tillika vulkanen Fogo har på senare tid varit en av de mest aktiva vulkanerna i världen med 10 utbrott under de senaste 250 åren. Ön byggdes upp av sköldvulkanen Monte Amarelo nådde 3500 m ö h innan delar av den kollapsade ned i Atlanten. Det massiva skredet som skedde mellan 86 och 124 tusen år sedan skapade högplatån Cha das Caldeiras samt den omringande klippsektionen Bordeira. Vi har samlat stenprover från de plutoniska bergarter som har trängt in sig i klippsektionen Bordeira. Målet med vår studie är att skapa en modell för hur magma lagringen fungerar under Fogo. Vi ämnar kartlägga magmalagringsdjupet med hjälp av kemiska variation i mineral som kan användas för att kartlägga kristalliseringstryck och temperatur som i t.ex. klinopyroxen. Vi är samtidigt intresserade av att veta vilka processer som sker i det magmatiska systemet och sambandet mellan vulkanska bergarter t.ex. lava och plutoniska bergarter. Tidigare studier av Fogos magmalagring har använt vulkaniska bergarter, som kristalliserar sig mellan 0.45 till 0.68 GPa när man undersökt kemin på kristallkanter av klinopyroxen. 20 prover har analyserats från Bordeiraklipporna och de innehåller låga kiselhalter, mellan 37 till 47% samt höga mängder alkaliska oxider så som kalium och natrium. Provernas mineralinnehåll består främst av större kristaller av silikatmineralen klinopyroxen ± olivin± fältspat ± främmande amfibolkristaller. De större kristallerna är omringande av en mikrokristallin grundmassa bestående av järn-titanoxider, apatit och fältspatoider. Klinopyroxen har en relativt stor kemisk variation, med Mg#37 till Mg#85, med ett medelvärde på Mg#71. Vi har även två olika sorter av fältspat, en grupp med ett kalciumrik rikt innehåll klassificeras som anortit, och en annan med ett kaliumrikt innehåll, som ortoklas. Vår analys av klinopyroxen-smälta har gett oss kristalliseringstryck som sträcker sig mellan 0.02 till 0.85 GPa med ett medelvärde på 0.47 GPa. Detta innebär att den dominerande processen i magmalagringssystemet är fraktionerad kristallisering då vi kan se ett linjärt avtagande för många ämnen när de jämförs mot magnesiumhalten. Vår magmalagringsmodell för vulkanen Fogo visar att klinopyroxenkrystallisering påbörjas i den litosfäriska manteln, mellan 15 och 28 km djup. Kristallisering av kanter på klinopyroxenkristaller samt mindre kristaller i grundmassan sker ytligare och visar på att det finns en eller flera magmalagringsnivåer i den oceaniska jordskorpan, mellan 9 till 12 km djup. Vulkaniska och plutoniska bergarter vittnar om ett delat magmasystem, vilket indikerar att skillnaden mellan de två bergarterna främst är tiden de befinner sig på respektive lagringsnivå. Vår strukturgeologiska data samt 3D modell visar att den intrusiva aktiviteten var primärt orienterad NV-SO, N-NO och O-Vriktning. Monte Amarelo-vulkanens skred och kollaps orsakades av intruderande gångar med en generell N-S orientering vilket ledde till ett skred på östsidan.

Les illites et les chlorites sont des minéraux ubiquistes dans la plupart des roches diagénétiques. Leurs compositions chimiques dépendent des conditions physiques subies (pression, P ; température, T) et de la composition de l’encaissant (e.g. Vidal et al., 1999 ; Parra et al., 2002a, 2002b). Ces minéraux peuvent donc potentiellement être de très bons marqueurs de l’histoire de l’enfouissement, et sont à la base de nombreuses méthodes empiriques ou thermodynamiques d’estimation des conditions P-T.Une compilation de données naturelles et la comparaison des thermobaromètres existants ont permis d’établir leurs limitations respectives. Pour s’en affranchir, un nouveau modèle ordonné de solution solide pour les chlorites a été développé, qui rend compte des forts contenus en silicium observés dans les chlorites naturelles de basses températures. La calibration de ce nouveau thermobaromètre sur des domaines géologiques variés de BT-BP a été testée sur des analyses de chlorites naturelles de la Gulf Coast (Texas) au pic de température (où les données P-T ont été mesurées in situ) et montre d’excellents résultats. Concernant les illites, le modèle thermodynamique le plus abouti (Dubacq et al., 2010) a également été testé de manière à estimer sa précision. L’étude a été complétée par la quantification de l’influence du fer ferrique. Les analyses chimiques utilisées ont été obtenues grâce à un protocole analytique à haute résolution spatiale. Alliant FIB et MET-EDS, ce protocole a permis une étude microtexturale et chimique fine des chlorites et des illites. Il en ressort que ces minéraux possèdent une diversité intracristalline dans leurs compositions et que la zonation chimique résultante apparaît comme une potentielle source d’erreurs dans la calibration des thermobaromètres, tout en permettant d’envisager la notion d’équilibre à l’échelle locale.Cette approche a été utilisée pour quantifier les trajets P-T d’unités géologiques des Alpes de Glarus. Ces résultats, comparés à ceux obtenus avec des méthodes thermobarométriques conventionnelles, donnent une bonne image des processus d’enfouissement et d’exhumation des roches de basse température. Ainsi, il apparaît que chaque composition enregistre une portion du chemin P-T rétrograde. D’une manière générale, chaque zone d’un même cristal renvoie à une partie de l’histoire de la roche. / Illite and chlorite are ubiquitous in most diagenetic rocks. Their chemical compositions are sensitive to thermobarometric conditions (pressure, P; temperature, T) and the bulk composition (e.g. Vidal et al., 1999; Parra et al., 2002a, 2002b). These minerals can be good indicators of burial history, and are the basis of several empiric or thermodynamic methods to estimate P-T conditions. A compilation of natural data and the comparison of existing thermobarometers allowed to establish their limitations. To circumvent it, an ordered model of solid solution for chlorites was developed which considers Si-rich low-T compositions. The calibration of this new thermobarometer on various LT-LP geologic fields was tested on natural chlorites analysis of Gulf Coast (Texas) at metamorphic peak, and gives accurate results. Concerning illites, the thermodynamic model of Dubacq et al. (2010) was also tested to estimate its precision. The study was completed by the quantification of the Fe3+ effects. Chemical analyses were obtained by an analytical protocol with high spatial resolution. Combining FIB and EDX-TEM, this protocol allowed an accurate microstructural study of chlorites and illites. These minerals have an intracristalline diversity of their chemical composition. The resulting chemical zonation is a potential error in calibration of thermometers, but allowed consideration of local equilibrium.This approach was used to quantify the P-T path of geologic units in Alps (near Glarus). These results, compared to results of conventional thermobarometers, give a good representation of burial and exhumation process for low-T rocks. Thus, the chemistry records a part of retrograde P-T path and each part of a crystal zoning corresponds to a part of rocks history.

Um das Verständnis der geologischen Entwicklung des größten bekannten Vorkommens von ultra-hochdruck (UHP) Gesteinen auf der Erde, des Dabie Shan im östlichen China, zu erhöhen, wurde eine multidisziplinäre Studie durchgeführt.<br /> Geophysikalische Daten wurden entlang einer ca. 20 km langen seismischen Linie im östlichen Dabie Shan gesammelt. Diese reflektionsseismischen Daten zeigen, dass die Kruste aus drei Lagen besteht. Die Oberkruste besitzt eine durchgehend niedrige Reflektivität und meist subhorizontale Reflektoren bis in eine Tiefe von ca. 15 km. Aufgrund dieser Charakteristika wird diese Zone als UHP-bezogener krustaler Keil interpretiert, der auf nicht UHP Kruste überschoben wurde. Ein abrupter Wechsel in der Geometrie aber auch Intensität der Reflektoren markiert die Grenze zu einer mittel- bis unterkrustalen Zone, die sich bis ca. 33 km Tiefe erstreckt. Diese Zone repräsentiert wahrscheinlich kratonale Yangtze Kruste, die von der triassischen UHP-Orogenese nicht erfasst wurde, aber während der Exhumierung das Liegende relativ zum UHP Keil war. Starke und kontinuierliche Reflektoren im Tiefenintervall von 33-40 km bilden höchstwahrscheinlich die Moho an der Basis der Kruste ab. Relikte einer Krustenwurzel, die sich wahrscheinlich während der Kollisionstektonik gebildet hatte, sind nicht sichtbar. Ein flaches tomographisches Geschwindigkeitsmodell, das auf der Inversion der Ersteinsätze gründet, konnte zusätzlich erstellt werden. Dieses Modell bildet deutlich die unterschiedlichen Lithologien auf beiden Seiten der Tan Lu Störung ab. Sedimente östlich der Störung zeigen Geschwindigkeiten von 3.4 - 5.0 km* s^-1, wohingegen die Gneise im Westen 5.2 - 6.0 km*s^-1 aufweisen. Die Geometrie der Geschwindigkeits-Isolinien kann als Ausdruck der Strukturen der Gesteine angenommen werden. Somit zeigen die Sedimente ein nordwestliches Einfallen zur Störung hin, wohingegen isoklinale Falten in den Gneisen abgebildet werden.<br /> Geländedaten aus der UHP Einheit des Dabie Shan ermöglichen die Definition von Grundgebirgs- und Deckeinheiten, die Teile des ehemaligen passiven Kontinentalrandes des Yangtze Kratons repräsentieren. Eine der Deckeinheiten, die Changpu Einheit, besitzt nach wie vor einen stratigraphischen Kontakt zu den Grundgebirgs-Gneisen. Der anderen Einheit hingegen, der Ganghe Einheit, fehlt ein entsprechendes Grundgebirge. Diese Einheit steht vielmehr über einen Blasto-Mylonit in tektonischem Kontakt zum Grundgebirge der vorherigen. Die Changpu Einheit baut sich aus kalk-arenitischen Metasedimenten auf, die mit Metabasalten assoziiert sind. Die Ganghe Einheit wird von arenitisch-vulkanoklastischen Metasedimenten, die ebenfalls mit metabasaltischen Gesteinen vergesellschaftet sind, dominiert. Das Grundgebirge baut sich aus diversen felsischen Gneisen auf, die von reliktisch eklogitfaziell bis grünschieferfaziell ausgeprägt sind, und in denen, zusätzlich zu Metabasalten, sporadisch mafisch-ultramafische Meta-Plutone auftreten. Mit Ausnahme der Ganghe Einheit, führen die Metabasite Coesit und belegen somit das UHP Ereignis. Die Mineralchemie der analysierten Proben dokumentiert deutliche Variationen in der Zusammensetzung der Hauptminerale, Granat und Omphazit, was entweder unterschiedliche Protolithe oder unterschiedliche Grade von Stoffaustausch mit den Wirtsgesteinen reflektiert. Gehalte von dreiwertigem Eisen in Omphaziten mit geringen Gesamteisengehalten, wurden mittels Titration bestimmt, wobei sich Werte von 30-40 % ergaben. Dennoch wurde ein noch konservativerer Wert von 50% dreiwertigem Eisen in den entsprechenden Berechnungen angenommen, hauptsächlich, um mit anderen Arbeiten vergleichbar zu sein. Texturen und chemische Zonierungen in den Mineralen sind kompatibel mit Gleichgewichtsbedingungen während dem Höhepunkt der Metamorphose, der retrograd überprägt wird. P-T Daten wurden mit deutlicher Betonung auf das Granat-Omphazit-Phengit Barometer, das mit Fe-Mg Austausch-Thermometern kombiniert wurde, berechnet. Höchstdrucke reichen von 42-48 kbar (für die Changpu Einheit) bis ca. 37 kbar (für das Grundgebirge und die Ganghe Einheit). Während der eklogitfaziellen Metamorphose wurden Temperaturen von ca. 750 °C erreicht. Obwohl die maximalen Drucke deutlich schwanken, sind die Temperaturbestimmungen in guter Übereinstimmung. Die Druckschwankungen können zum einen durch deutlich Ca-dominierte Granate (bis zu 50 mol% Grossular in der Changpu Einheit) und/oder zum anderen durch Modifikationen der Mineralzusammensetzungen während der retrograden Metamorphose erklärt werden.<br /> Die präsentierten integrativen geologischen Daten ermöglichen die folgenden Schlussfolgerungen<br /> i) Grundgebirgs- und Deckeinheiten treten im Dabie Shan auf und wurden beide UHP metamorph überprägt<br /> ii) Der Dabie Shan ist das metamorphe Äquivalent des früheren passiven Kontinentalrandes des Yangtze Kratons<br /> iii) felsische Gneise, die eine UHP Metamorphose durchlaufen, sind von Volumenver-änderungen betroffen, die durch großräumige Phasenumwandlungen (Quarz <-> Coesit) hervorgerufen werden, was direkt die tektono-metamorphen Prozesse beeinflusst<br /> iv) Initiale Unterschiede in der Temperatur sind möglicherweise dafür verantwortlich, dass generell Unterkrustengesteine in UHP Fazies fehlen / A multidisciplinary study has been carried out to contribute to the understanding of the geologic evolution of the largest known occurrence of ultra-high-pressure (UHP) rocks on Earth, the Dabie Shan of eastern China. <br /> Geophysical data, collected along a ca. 20 km E-W trending seismic line in the eastern Dabie Shan, indicate that the crust comprises three layers. The upper crust has a homogeneously low reflectivity and exhibits roughly subhorizontal reflectors down to ca. 15 km. It is therefore interpreted to portray a crustal UHP slab thrust over non-UHP crust. An aprubt change in intensity and geometry of observed reflectors marks the boundary of a mid- to lower crustal zone which is present down to ca. 33 km. This crustal zone likely represents cratonal Yangtze crust that was unaffected by the Triassic UHP event and which has acted as the footwall during exhumation of the crustal wedge. Strong and continuous reflectors occurring at ca. 33-40 km depth most likely trace the Moho at the base of the crust. Any trace of a crustal root, that may have formed in response to collision tectonics, is therefore not preserved. A shollow tomographic velocity modell based on inversion of the first arrivals is constructed additionally. This model clearly images the distinct lithologies on both sides of the Tan Lu fault. Sediments to the east exhibit velocities of about 3.4 - 5.0 km* s^-1, whereas the gneisses have 5.2 - 6.0 km*s^-1. Geometry of velocity isolines may trace the structures present in the rocks. Thus the sediments dip shallowly towards the fault, whereas isoclinal folds are imaged to occur in the gneisses.<br /> Field data from the UHP unit of the Dabie Shan enables definition of basement-cover sequences that represent sections of the former passive margin of the Yangtze craton. One of the cover sequences, the Changpu unit, still displays a stratigraphic contact with basement gneisses, while the other, the Ganghe unit, includes no relative basement exposure. The latter unit is in tectonic contact with the basement of the former unit via a greenschist-facies blastomylonite. The Changpu unit is chiefly constituted by calc-arenitic metasediments intercalated with meta-basalts, whereas the Ganghe unit contains arenitic-volcanoclastic metasediments that are likewise associated with meta-basalts. The basement comprises a variety of felsic gneisses, ranging from preserved eclogitic- to greenschist-facies paragenesis, and locally contains mafic-ultramafic meta-plutons in addition to minor basaltic rocks. Metabasites of all lithologies are eclogite-facies or are retrogressed equivalents, which, with the exception of those from the Ganghe unit, bear coesite and thus testify to an UHP metamorphic overprint. Mineral chemistry of the analysed samples reveal large compositional variations among the main minerals, i.e. garnet and omphacite, indicating either distinct protoliths or different degrees of interaction with their host-rocks. Contents of ferric iron in low Fetot omphacites are determined by wet chemical titration and found to be rather high, i.e. 30-40 %. However, a even more conservative estimate of 50% is applied in the corresponding calculations, in order to be comparable with previous studies. Textural constraints and compositional zonation pattern are compatible with equilibrium conditions during peak metamorphism followed by a retrogressive overprint. P-T data are calculated with special focus on the application of the garnet-omphacite-phengite barometer, combined with Fe-Mg exchange thermometers. Maximum pressures range from 42-48 kbar (for the Changpu unit) to ~37 kbar (for the Ganghe unit and basement rocks). Temperatures during the eclogite metamorphism reached ca. 750 °C. Although the sample suite reveals variable peak-pressures, temperatures are in reasonable agreement. Pressure differences are interpreted to be due to strongly Ca-dominated garnet (up to 50 mol % grossular in the Changpu unit) and modification of peak-compositions during retrogressive metamorphism.<br /> The integrated geological data presented in this thesis allow it to be concluded that, <br /> i) basement and cover rocks are present in the Dabie Shan and both experienced UHP conditions<br /> ii) the Dabie Shan is the metamorphic equivalent of the former passive margin of the Yangtze craton <br /> iii) felsic gneisses undergoing UHP metamorphism are affected by volume changes due to phase transitions (qtz <-> coe), which directly influence the tectono-metamorphic processes<br /> iv) initial differences in temperature may account for the general lack of lower crustal rocks in UHP-facies