The purpose of this project is to review current literature on the mechanics and physiology of the vertical jump and to provide an understanding of the jump itself. The second purpose is to develop a step by step program to increase vertical jump from grade school through high school.

Le travail de recherche présenté dans ce document a été réalisé dans le cadre d’une collaboration entre l’ENTPE/ niversité de Lyon et la SNCF. L’objectif de l’étude est la caractérisation des propriétés thermomécaniques des enrobés bitumineux à être utilisés dans la construction de voies ferrées. Le comportement viscoélastique linéaire (VEL) et la résistance à la fatigue d’enrobés pour couche de base couramment utilisés en France ont été étudiés. L’influence de l’eau sur ces propriétés a été aussi étudiée du fait que l’exposition à l’eau des couches bitumineuses en structure ferroviaire peut les altérer et réduire la durée de vie de l’ouvrage. La caractérisation du comportement VEL et de la résistance à la fatigue des matériaux a été faite en réalisant des essais mécaniques en traction-compression sur des éprouvettes cylindriques au laboratoire LTDS/ENTPE. Une nouvelle procédure de conditionnement à l’eau et au gel a été proposée sur la base des méthodes d’essai normalisées française et américaine. La susceptibilité à l’eau des matériaux a été obtenue par comparaison des résultats des essais mécaniques entre éprouvettes conditionnées et non conditionnées. Le comportement VEL des matériaux a été simulé avec le modèle 2S2P1D, développée à l’ENTPE. Trois formules pour couche de base ont été testées : une GB3, une GB4 et une formule appelée GB PMB. Cette dernière est la même formule GB3 mais avec un bitume modifié aux polymères SBS. La GB3 sert comme matériau de référence. La GB4 est un matériau de meilleures performances que la GB3. La formule GB4 étudiée correspond à celle mise en place dans la couche sous-ballast de la Ligne à Grande Vitesse (LGV) Bretagne-Pays de Loire. L’intérêt d’étudier la GB PMB est de savoir si l’utilisation de bitumes modifiés aux polymères est pertinente dans un contexte ferroviaire ou pas. 2 La zone test construite dans la LGV Est-Européenne près de la ville de Reims avec une couche sous-ballast en enrobé bitumineux a servi comme cas d’étude pour cette thèse. Les différents avantages de l’utilisation de matériaux bitumineux en structure ferroviaire retrouvées dans la bibliographie ont été confirmés avec le retour sur l’expérience de cette zone test. Les résultats obtenus des travaux expérimentaux montrent que les trois formules étudiées présentent des capacités portantes (rigidité) suffisantes pour leur utilisation comme couche sous-ballast. La méthode de conditionnement à l’eau et au gel utilisée n’a pas altéré le comportement VEL des matériaux. En ce qui concerne les essais de fatigue, les résultats ont montré que l’utilisation d’un bitume modifié aux polymères augmente sensiblement la résistance à la fatigue de la GB3. La GB PMB a aussi montré une plus faible susceptibilité de la résistance à la fatigue à l’eau et au gel que la GB3. Du fait que les niveaux de sollicitation de la base de la couche d’enrobé de la zone test LVG EE sont très faibles, tous les matériaux étudiés présentent des propriétés satisfaisantes de résistance à la fatigue en couche sous-ballast. / The research presented in this document was carried out in collaboration between the National School of Public Works (Ecole Nationale des Travaux Publics de l’Etat – ENTPE) of the University of Lyon and the French National Railway Company (Société Nationale des Chemins de Fer français – SNCF). The objective of this study is the characterisation of the thermomechanical properties of road base-course bituminous mixtures commonly used in France for their use in railway track structures. Linear Viscoelastic (LVE) and fatigue resistance properties have been investigated. The influence of moisture damage including freeze-thaw cycles on the properties of the studied mixtures was also studied. LVE and fatigue resistance properties were obtained by means of sinusoidal tension-compression tests on cylindrical samples at the ENTPE/LTDS laboratory. A protocol for moisture conditioning of bituminous mixtures samples was developed based on the French and American standard test methods for moisture susceptibility and on the literature review on the subject. Moisture damage was assessed using complex modulus and fatigue tests. The LVE behaviour of the materials was described using the 2S2P1D (2 Springs, 2 Parabolic elements and 1 Dashpot) model developed at the ENTPE/LTDS laboratory. Three road base-course mixtures available in the French market were studied: a GB3, a GB4 and a mixture called GB PMB (for Polymer-Modified Bitumen). The GB3 mixture stands as the reference material since it is commonly used for the base-courses of conventional roads in France. The GB4 mixture stands as a better performing material than the GB3. The specific studied GB4 formulation corresponds to that used as sub-ballast of the Brittany-Loire high-speed line (HSL) in western France. The GB PMB stands as an improved version of the GB3 in which the base bitumen is replaced by polymer-modified bitumen. The interest of the study of this third mixture is to assess the relevance of using PMB’s in bituminous mixtures intended for railway platforms. The test zone of the East-European HSL served as case study to identify the loading conditions and the behaviour of a bituminous sub-ballast layer in a French track. The several advantages of using bituminous mixtures as sub-ballast material identified in the literature are confirmed by the feedback from this test zone. The results obtained show that the studied bituminous mixtures present excellent bearing capacities (stiffness) for their use as sub-ballast layers in France. The used moisture conditioning protocol did not alter the LVE behaviour of the materials. The good performance of the materials is then expected to be perennial regarding the effect of moisture on the LVE behaviour. With respect to fatigue resistance, the results show that the use of a PMB provides an important increase of the fatigue life as well as a reduction of the susceptibility to moisture damage. However, given the identified loading levels of the bituminous sub-ballast in a common French track structure, all three mixtures present adequate fatigue resistance properties.

The aim of this diploma thesis is to elaborate a variant of the technical solution of the Northeast bypass road of the city Hranice and its subsequent comparison with other variant prepared by the company Linio Plan, s.r.o. The main task of the bypass road is the operation of the industrial zone, through which is achieved the relocation of a large part of the transit traffic from the city centre. The basic difference of compared variants is their location to the city, the solution developed by Linio Plan, s.r.o. passes through the industrial zone and the other variant passes outside this zone.

The subject of the diploma thesis is to design a redevelopment of railway station Horni Cerekev, in order to meet current traffic and legislation on access of persons with reduced mobility. Two platforms with the platform edge height of 550 mm above the top of the rail have been designed. The amount of five running tracks through the station remains unchanged. Furthermore, the railway superstructure, railway substructure and conceptual design of space in front of the station.

The subject of this master's thesis is a static and structural design of a Load-carrying steel structure of railway bridge with bottom steel deck of the span of 42 + 60 + 42 m over the Labe river in Děčín. A solid steel beam forms the main load-bearing structure of the bridge reinforced with truss-work. The truss-work is made up of an open top chord and diagonal strut without secondary vertical struts. The calculations were done in compliance with valid ČSN EN documents.

The aim of diploma thesis is design of new connection in Havlickuv Brod. New connection will enable passage without setting-back between Brno and Jihlava in Havlickuv Brod.

This diploma thesis deals with modernization design of railway station Vranovice for 200 km/h speed according to a traffic demand and actual legislation not only in sectinon of access of people with mobility or orientation disability. The design consists of track direction and height adjustment including railway superstructure and substructure, and 2 island platforms which platform edge height is 550 mm above the top of the rail.

The goal of the diploma thesis is a design of the reconstruction of the Solnice railway station in aim to fulfil the requirements for the movement of persons with reduced mobility. It was necessary to design platforms with a height of the platform edge 550 mm above rail level in that context. Furthermore the increased length of tracks as well as a modification of the connection of sidings of Škoda company and of the timber plant was required. There was also included the design of reconstruction of drainage system of railway tracks.

The topic of this thesis is the study of reconstruction railway station Moravské Bránice and railway station Rakšice in order to insert new platforms, according to current legislation. In railway station Moravské Bránice it was necessary to design at least 3 platform edges, in railway station Rakšice it was necessary to design at least 2 platform edges.

This thesis examines the topic of determining spatial relations between crane tracks and the processing of measured data. Before the measurements were made, the precision of the measuring equipment being used was determined in order to increase the accuracy of the results in ascertaining spatial relations. The cyclic error, additive constant, and difference between the reflecting target and prism were all determined in measuring distances. In the context of this thesis we observed the spatial parameters of crane tracks in the hall of Mostarna, which is a part of the business KRALOVOPOLSKA a.s..