This report explores the effect of interactive visualizations on the advancement of mathematics understanding. Not only do interactive visualizations aid mathematicians to expand the body of knowledge of mathematics but it also allows students an efficient way to process the information taught in schools. There are many concepts in mathematics that utilize interactive visualizations and examples of such concepts are illustrated within this report. / text

Syfte: Syftet med studien var att skapa förståelse för hur konsultchefers ledarskap blir präglat a trepartsrelationen som uppstår när det är två parter som är ansvariga för en konsult. Vi ville skapa oss en inblick i hur konsultcheferna leder sina konsulter och hur de arbetar för att motivera dem. Vidare ville vi skaffa oss en uppfattning över hur konsulterna upplever situationen. Metodik: Studien har genomförts i form av en fallstudie på två bemanningsföretag med utgångspunkt i en induktiv forskningsansats. Data har samlats in genom en kvalitativ metod där sju semistrukturerade intervjuer med personer på fallföretagen har genomförts. Slutsats och slutdiskussion: Genom studien har det framkommit att trepartsrelationen är ett komplext fenomen där chefen inte ses som den traditionella ledaren utan snarare som en administratör. Genom trepartsrelationen har det framkommit att problem kan uppstå då konsultchefernas roll blir likt medlare istället för chef. Konsulterna reflekterar inte över trepartsrelationen utan anser att gränserna är tydliga, däremot kan de inte alltid urskilja vilket företag de tillhör. Genom studien har det även kommit fram att konsultchefer och konsulter har olika bild över vad motivation är, vilket vi menar tyder på att de har olika förhållningsätt till fenomenet. Studien har även visat att motivation till arbetet inte är något som konsultcheferna lägger någon större vikt vid. Konsulterna beskriver att de strävar efter en heltidsanställning och menar på att de inte nödvändigtvis vill vara anställda som konsulter. Konsultcheferna menar på att en konsult som slutar är något positivt för företaget eftersom det resulterar i gott rykte för verksamheten. / Purpose: The purpose of this study was to create an understanding of how the temporary employee manager is characterized by the triangular relationship that occurs when there are two parties responsible for an employee. We also wanted to create a picture of how temporary employee manager manage to lead their temporary employees and how they work to motivate them. Further, we wanted to get an idea of how the temporary employees experience the situation. Methodology: The study was conducted in the form of a case study on two staffing companies on the basis of an inductive research approach. Data were collected through a qualitative method where seven semi-structured interviews with individuals on the companies that we studied. Conclusion and final discussion: The study has revealed that triangular relationship is a complex phenomenon in where the leader is seen more as an administrator more than a traditional manager. Through the study we have concluded that the triangular relationship have made that managers are seen as a mediator, this is something that temporary employees did not reflect over. But in other hand they have problem to know which company they belong to. The study has proved that the managers and employees have different ways to look at motivation. We can see that they have different approaches to the phenomenon. The study has also shown that motivation to work is not something that a temporary employee manager put any greater emphasis on. The temporary employees describe that they are looking for a full time job, and that they don’t necessary want to be a consultant. The managers see that an employee that quit is something good for the company, because it leads to a good reputation.

SectionBuilder is an innovative finite element based tool, developed for analysis and design of composite beam cross-sections. The tool can handle the cross-sections with parametric shapes and arbitrary configurations. It can also handle arbitrary lay-ups for predefined beam cross-section geometries in a consistent manner. The material properties for each layer of the cross-section can be defined on the basis of the design requirements. This tool is capable of dealing with multi-cell composite cross-sections with arbitrary lay-ups. It has also the benefit of handling the variation of thickness of skin and D-spars for beams such as rotor blades. A typical cross-section is considered as a collection of interconnected walls. Walls with arbitrary lay-ups based on predefined geometries and material properties are generated first. The complex composite beam cross-sections are developed by connecting the walls using various types of connectors. These connectors are compatible with the walls, i.e., the thickness of the layers of the walls must match with those of the connectors at the place of connection. Cross-sections are often reinforced by core material for constructing realistic rotor blade cross-sections. The tool has the ability to integrate core materials into the cross-sections. A mapped mesh is considered for meshing parametric shapes, walls and various connectors, whereas a free mesh is considered for meshing the core materials. A new algorithm based on the Delaunay refinement algorithm is developed for creating the best possible free mesh for core materials. After meshing the cross-section, the tool determines the sectional properties using finite element analysis. This tool computes sectional properties including stiffness matrix, compliance matrix, mass matrix, and principal axes. A visualization environment is integrated with the tool for visualizing the stress and strain distributions over the cross-section.

The objective of this PhD research program is to develop an accurate and efficient heterogeneous three-dimensional computational model for simulating the drying of wood at temperatures below the boiling point of water. The complex macroscopic drying equations comprise a coupled and highly nonlinear system of physical laws for liquid and energy conservation. Due to the heterogeneous nature of wood, the physical model parameters strongly depend upon the local pore structure, wood density variation within growth rings and variations in primary and secondary system variables. In order to provide a realistic representation of this behaviour, a set of previously determined parameters derived using sophisticated image analysis methods and homogenisation techniques is embedded within the model. From the literature it is noted that current three-dimensional computational models for wood drying do not take into consideration the heterogeneities of the medium. A significant advance made by the research conducted in this thesis is the development of a three - dimensional computational model that takes into account the heterogeneous board material properties which vary within the transverse plane with respect to the pith position that defines the radial and tangential directions. The development of an accurate and efficient computational model requires the consideration of a number of significant numerical issues, including the virtual board description, an effective mesh design based on triangular prismatic elements, the control volume finite element discretisation process for the cou- pled conservation laws, the derivation of an accurate dux expression based on gradient approximations together with flux limiting, and finally the solution of a large, coupled, nonlinear system using an inexact Newton method with a suitably preconditioned iterative linear solver for computing the Newton correction. This thesis addresses all of these issues for the case of low temperature drying of softwood. Specific case studies are presented that highlight the efficiency of the proposed numerical techniques and illustrate the complex heat and mass transport processes that evolve throughout drying.

The objective of this PhD research programme is to investigate the effectiveness of a finite volume method incorporating radial basis functions for simulating nonlinear transport processes. The finite volume method is the favoured numerical technique for solving the advection-diffusion equations that arise in transport simulation. The method transforms the original problem into a system of nonlinear, algebraic equations through the process of discretisation. The accuracy of this discretisation determines to a large extent the accuracy of the final solution. A new method of discretisation is presented that employs radial basis functions (rbfs) as a means of local interpolation. When combined with Gaussian quadrature integration methods, the resulting finite volume discretisation leads to accurate numerical solutions without the need for very fine meshes, and the additional overheads they entail. The resulting nonlinear, algebraic system is solved efficiently using a Jacobian-free Newton-Krylov method. By employing the new method as an extension of existing shape function-based approaches, the number of nonlinear iterations required to obtain convergence can be reduced. Furthermore, information obtained from these iterations can be used to increase the efficiency of subsequent rbf-based iterations, as well as to construct an effective parallel reconditioner to further reduce the number of nonlinear iterations required. Results are presented that demonstrate the improved accuracy offered by the new method when applied to several test problems. By successively refining the meshes, it is also possible to demonstrate the increased order of the new method, when compared to a traditional shape function basedmethod. Comparing the resources required for both methods reveals that the new approach can be many times more efficient at producing a solution of a given accuracy.

Title: Correspondence Problem in Geometric Morphometrics Tasks Author: Václav Krajíček Department / Institute: Department of Software and Computer Science Education Supervisor of the doctoral thesis: RNDr. Josef Pelikán Supervisor's e-mail address: pepca@cgg.mff.cuni.cz Abstract: Shape analysis in physical anthropology, biomedicine, and related disci- plines is mostly done using landmarks or by measuring distances. New techno- logical advancements allow the digitization of object's appearance in the form of triangular meshes or volume images. These digital images are especially beneficial in the cases when landmarks cannot be used to effectively describe the shape. In order to statistically analyze shape in a sample of observations, which are represented by these modalities, correspondence has to be found. Registration is a crucial tool in mapping the shape representations into a common space where correspondence is found by nearest neighbor principle in the case of triangular meshes or by overlaps in the case of volume images. B- spline based non-rigid registration is chosen because of its versatility, relative speed and ability to handle both meshes and volume images. Experiments were also performed with other alternatives - Thin-plate splines and Coherent point drift. The algorithm was modified to handle...

In this dissertation, we study the triangular mesh simplification process, describing its main characteristics. We discuss an adaptation for triangular meshes of a mesh simplification process based on Voronoi coverage proposed by Peixoto [2002]. Moreover, we use Fast Marching Method as a distance function over the mesh and some different strategies for simplified mesh vertices selection, like curvature based selection. The simplification process is done by constructing an intrinsic Voronoi diagram over the original mesh. We discuss some necessary conditions to obtain a mesh, as Voronoi dual, without any singularities and topologically equivalent to the original mesh. / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Nesta dissertação, estudaremos o processo de simplificaçãoo de malhas triangulares, caracterizando-o com suas particularidades. Discutiremos uma adaptação para superfícies triangulares do método de simplificação baseado em uma cobertura de Voronoi proposto por Peixoto [2002]. Além disso, utilizaremos o método Fast Marching como uma nova métrica e diferentes estratégias para seleção de vértices da malha simplificada, como a seleção por curvatura. A simplificação ocorre a partir de um diagrama de Voronoi intrínseco à malha. Discutiremos algumas condições necessárias para que a partir do dual desse diagrama, obtenha-se uma malha sem singularidades que seja equivalente a malha original.

Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-07-10T17:54:50Z No. of bitstreams: 1 JAMILSON RAMOS CAMPOS - DISSERTAÇÃO PPGMAT 2006..pdf: 6748825 bytes, checksum: 592fc0c2a05c38766aae5d672c3c4708 (MD5) / Made available in DSpace on 2018-07-10T17:54:50Z (GMT). No. of bitstreams: 1 JAMILSON RAMOS CAMPOS - DISSERTAÇÃO PPGMAT 2006..pdf: 6748825 bytes, checksum: 592fc0c2a05c38766aae5d672c3c4708 (MD5) Previous issue date: 2006-12 / Este trabalho apresenta um estudo de dois modelos computacionais deformáveis aplicados à simulação de tecidos, ambos modelos de mecânica de partículas fisicamente embasados, contemplando algoritmos, um para cada modelo, para o tratamento de colisões. Estudamos um modelos de malha retangular (clássico e pouco robusto) e um baseado em malha triangular (moderno e robusto) através da implementação, simulações e uma análise qualitativa simples entre os resultados visuais obtidos com ambos. Nenhum destes modelos apresenta relações entre deformações tangenciais e normais e portanto, não geram rugas e/ou dobras espontaneamente. Para torná-los mais realísticos, em nossa implementação, propomos o uso de uma força de acoplamento entre as deformações tangenciais normais. / This work presents a study of two deformable computational models applied to the simulation of cloths, both physically based models of particle mechanics, contemplating one per model, collision treatment algorithms. We study a rectangular grid model (classic and not very robust one) and a triangular mesh based model (modern and robust one) throught implementation, simulations and a simple qualitative analysis between visual results reached with them. Neither of these models presents a relationship with tangent and normal deformations therefore don't build folds and/or wrinkles spontaneously. to turn then more realistic, in our implementation, we propose to make use of a coupling force between tangent and normal deformations.

Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-07-23T14:23:04Z No. of bitstreams: 1 RIVALDO DO NASCIMENTO JÚNIOR - DISSERTAÇÃO PPGMAT 2009..pdf: 371424 bytes, checksum: 6e808f19bfcee3712a8cc10f221c042b (MD5) / Made available in DSpace on 2018-07-23T14:23:04Z (GMT). No. of bitstreams: 1 RIVALDO DO NASCIMENTO JÚNIOR - DISSERTAÇÃO PPGMAT 2009..pdf: 371424 bytes, checksum: 6e808f19bfcee3712a8cc10f221c042b (MD5) Previous issue date: 2009-04 / Neste trabalho apresentamos um modelo para a superálgebra das matrizes triangulares superiores e mostraremos como obter o produto de dois T-ideais como núcleo de um homomorfismo de álgebras. em seguida, mostraremos como obter as identidades polinomiais para a álgebra das matrizes triangulares em blocos com Z2-graduação a partir das identidades ordinárias das álgebras de sua diagonal principal. / In this work we present a general model for the superalgebra of upper triangular matrices and show how to obtain the product of two T-ideals as the kernel of a homomorphism between two algebras. Next, we show how to obtain the polynomial identities for algebra of the block-triangular matrices with Z2-grading from the ordinary identities of the algebras of its main diagonal.

Thesis submitted in fulfilment of the requirements for the degree Doctor of Technology: Mechanical Engineering in the Faculty of Engineering at the Cape Peninsula University of Technology 2014 / Open channels, flumes or launders are used in the mining industry to transport slurries during processing and to disposal sites. Water plays a major part in the makeup of these slurries, its usage and availability is critical in countries where there are strict water usage management programs. The optimisation of flume design involves the maximisation of solids transport efficiency whilst, at the same time reduces water usage. The design of open channels is complex as it is dependent on both the slurry rheology and the channel shape. Very little has been reported in the literature for predicting non-Newtonian laminar flow in open channels of arbitrary cross-section. The only method available was that proposed by Kozicki and Tiu (1967, 1986). The shape factors they used were those evaluated from analytical solutions for flow of Newtonian fluids in open channels of the same cross-section. However, they carried out no experimental work to validate their model. Few experimental studies have been made on the effect of shape on non-Newtonian flow in open channels. Naik (1983) tested kaolin in water suspensions in a rectangular channel. Coussot (1994) provided some data for the flow of a Herschel-Bulkley fluid in rectangular and trapezoidal channels. Fitton (2007; 2008) obtained data for flow of three different non-Newtonian fluids (carboxymethylcellulose, carbopol and thickened tailings) in a semi-circular channel. A large experimental database for non-Newtonian flow in rectangular open channels was published by Haldenwang (2003) at the Flow Process Research Centre, Cape Peninsula University of Technology. Guang et al. (2011) performed Direct Numerical Simulations of turbulent flow of a yield- pseudoplastic fluid in a semi-circular channel. They compared their simulations with actual field measurements and found them to over-predict the flow velocity by approximately 40%. The source for this discrepancy was difficult to ascertain. A comprehensive database was compiled during this research of the flow of three non–Newtonian fluids in rectangular, trapezoidal, semi-circular and triangular channels. The flow of carboxymethylcellulose solutions and aqueous kaolin and bentonite suspensions was investigated in a 10 meter long flume at angles ranging from 1° to 5° from the horizontal plane. The effect of channel shape on the friction factor-Reynolds number relationship for laminar and turbulent open channel flow of these three fluids was investigated. New models for the prediction of laminar and turbulent flow of non-Newtonian fluids in open channels of different cross-sectional shapes are proposed. The new laminar and turbulent velocity models are compared with three previously-published velocity models for laminar flow and five previously-published velocity models for turbulent flow using average velocity as comparison criteria. For each channel shape, the laminar flow data can be described by a general relationship, f = K/Re where f is the Fanning friction factor and Re is the appropriate Haldenwang et al. (2002) Reynolds number. The K values were found to be 14.6 for triangular channels with a vertex angle of 90°, 16.2 for semi-circular channels, 16.4 for rectangular channels and 17.6 for trapezoidal channels with 60 degree sides. These K values were found to be in line with those reported by Straub et al. (1958) and Chow (1969) for open channel laminar flow of Newtonian fluids as opposed to the assumption made by Haldenwang et al. (2002; 2004) of using a constant value of 16 based on the pipe flow paradigm for all channel shapes. This new laminar model gave a closer fit to the laminar flow data than those from the three previously-published models. However, the presence of the yield stress still presents a problem, which makes the flow prediction in laminar flow for such fluids not very accurate. The investigation on non-Newtonian turbulent flow of the three fluids in the four different shaped open channels revealed that the data was described by the modified Blasius equation f = a Re b where a and b are constant values determined for each channel shape and Re is the Haldenwang et al. (2002) Reynolds number. Values of a and b for a rectangular channel were found to be 0.12 and -0.330, for a semi- circular channel 0.048 and -0.205, for a trapezoidal channel with 60° sides, 0.085 and -0.266 and for a triangular channel with vertex angle of 90°, 0.042 and -0.202. New laminar and turbulent velocity models were derived from using the new laminar f = K/Re and turbulent f = a Re b, friction factor-Reynolds number relationship. The laminar velocity model did not always give the best result, but the majority of the time it did, compared to the three previously published models. The new turbulent velocity model yielded the best results when compared to the five previously published models using average velocity as comparison criteria. The composite power law modelling procedure of Garcia et al. (2003) used for pipe flow predictions was extended to the present work on non-Newtonian flow in open channels of various cross-sections. The results show that the modelling technique used by Garcia et al. (2003) for pipe flow can be used to adequately predict flow in an open channel of a given cross-sectional shape provided that an appropriate Reynolds number is used to take into account the non-Newtonian behaviour of the test fluid. It was found that the results using the Haldenwang et al. (2002) Reynolds number yielded better results than those based on the adapted Metzner-Reed Reynolds number. The correlations and models developed and experimentally validated during this research can be used to further improve the design of rectangular, semi-circular, trapezoidal and triangular open channels to transport non-Newtonian fluids.