Global ETD Search

221	Novostavba vinařského domu / Wine making house Kouřilová, Vendula January 2015 (has links) The subject of this master thesis is a design of wine house which comes together with restaurant and accommodation in Strazovice near Kyjov. It includes design study and all the detailed drawings of the building. The building is designed with three services - winery, restaurant and accommodation. Winery is divided into separate rooms for wine processing, finishing and wine aging, also storage, distribution and sale of wine. Canteen service includes kitchen with accessories, restaurant with dining, separated lounge, vaulted cellar and room for degustation. Lounge, cellar and degustation room is primary determined for different corporate events, conferences, weddings, family events and others. For building were chosen descending lands at the edge of Strazovice.. The main reason for this decision is the view that this place provides because of its higher position. Also this village is a part of region, for which wine production is typical. The shape of the object is rectangular and consists of three floors. Two upper floors are receding with comparison to the first floor. This formed a part of terrace which is connected with the oval part on pillars. Basement is situated completely below ground, only the south side is partly uncovered. Construction is made of reinforced concrete. Ground floors are with ventilated frontage. Frontage of the first floor is covered with wooden cladding, and frontage of the second floor is covered with plaster. Vertical constructions are made of lime-sand blocks and horizontal constructions are reinforced concrete. The roof is built of wooden trusses with arched upper part. On the roof there are installed photovoltaic panels for electricity which is used in the building. Rainwater is held in tank, servers as a water supply for the building. Wastewater is depurated in small sewage plant which is further conducted into the building. Other wastewater is captured in the sump. Projection of the winery emphasis, inter alia, on static and
222	Stavebně technologický projekt pavilonu laboratoří technologií Akademie věd v Brně / Constructional and Technological Project of Laboratoty Pavilion for Technology of AS in Brno Cihelka, Karel January 2015 (has links) The topic of this master thesis is dealing with selected parts of the constructional and technological project of laboratoty pavilion for technology of AS in Brno. Thesis is mainly focused for technological instructions of ground works, support of next building and solving of city center problems. Components of this thesis are evaluation plans and work place safety protocols. Next content of thesis are study of main technological phases, time and finanical plans, items budget, selected details, construction site equipment and design and verification of tower crain.
223	Autosalon / Autosalon Balúch, Tomáš January 2017 (has links) This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.
224	Fuktkontroll av en ventilerad platta på mark : Modellering i COMSOL Multiphysics 5.5 Liljestrand, Simon, Lundell, Viktor January 2020 (has links) Krypgrunder i någon form har använts som grundkonstruktion i Sverige under långtid. Förr var det torpargrunder som med tiden blev isolerade krypgrunder och plintgrunder. Gemensamt för krypgrundskonstruktioner som är ventilerade med utomhusluft är att under sommarhalvåret blir det förhöjda relativa ånghalter. Syftet med fallstudien är att studera en uteluftsventilerad konstruktion med välisolerat bjälklag och markisolering. Konstruktionen är nedgrävd och ventilationen i grunden sker via en tunn spalt under marknivå. Luftspaltens temperatur och relativa ånghalt är av intresse för att avgöra om det finns risken för mögel i konstruktionen. En simulering av värmeflödet mellan byggnad och mark genomförs i COMSOLMultiphysics 5.5 för att avgöra temperaturfördelningen i konstruktionen. Temperaturfördelningen ligger som grund för fastställandet av relativ ånghalt i konstruktionens luftspalt. Simuleringen använder klimatdata för ett typår i Gävle. Simuleringen visar att det är höga temperaturer i luftspalten året runt. Detta ger enrelativ ånghalt som månadsmedel på 37–77% under ett år. Den höga temperaturen iluftspalten bidrar till att hålla konstruktionen torr då kritisk relativ ånghalt, 75–80%, inte överstigs under en längre period. Resultat är förvånansvärt positivt med en låg risk för mögeltillväxt i konstruktionen.Det finns många antaganden framförallt vilket luftflöde som återfinns i luftspalten.För att validera resultaten i arbetet så bör mätningar genomföras på de två prototyphus som existerar. / Crawl spaces in some form have been used as foundations in Sweden for a long time.In the past, it was uninsulated crawl spaces that eventually evolved into insulatedcrawl spaces and open plinth foundations. An increased relative humidity during thesummer is a common problem for crawl spaces that are ventilated with outdoor air. The purpose of the case study is to study an outdoor ventilated structure with wellinsulated floor and ground insulation. The construction is below ground level andthe ventilation takes place via a thin air gap below ground level. The temperatureand relative humidity in the air gap are of interest to determine if there is a risk ofmould growth in the design. A simulation of the heat flow between the building and the ground is carried out inCOMSOL Multiphysics 5.5 to determine the temperature distribution in the design.The temperature distribution is the basis for the determination of relative vaporcontent in the air gap of the structure.The simulation uses climate data for a typicalyear in Gävle. The simulation shows a high temperature in the air gap which gives a relative vaporcontent as a monthly average of 37–77% during a year. The high temperature in theair gap contributes to keeping the structure dry when critical relative humidity, 75–80%, is not exceeded for a longer period of time. The results are surprisingly positive with a low risk of mold growth in the construction.There are many assumptions, in particular, which airflow is found in the airgap. In order to validate the results in the work, measurements should be made onthe two prototype houses that exist. COMSOL COMSOL multiphysics Crawlspace Suspended foundation Crawler space Crawling space Mould Mould growth Moisture Moisture balance Ventilated slab on ground VPM Building technology Lundell Liljestrand Ljubos Ljusbo hyreshus Ljusbo hyreshus AB Air gap Moisture content Relative moisture content critical relative moisture content foundation COMSOL COMSOL multiphysics Krypgrund Torpargrund Mögel Fuktbalans Fuktteori Mögeltillväxt Ventilerad platta på mark VPM Byggnadsingenjör Byggnadsteknik Liljestrand Lundell Ljusbo hyreshus Ljusbo Ljusbo hyreshus AB Luftspalt Fukthalt Relativ ånghalt Ånghalt Kritisk relativ ånghalt grundläggning Building Technologies Husbyggnad
225	Sportovně relaxační centrum / Sports and wellness center Libřický, Zdeněk January 2018 (has links) The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.
226	Centrální požární stanice Svitavy / Fire station, Svitavy Navrátil, Michal January 2020 (has links) The diploma thesis elaborates the project documentation for the construction of a new apartment of central fire station type C1 with the administrative part of the Territorial Department. The fire station is technologically linked to the second building SO.02 the technical and technological background of the fire station. The building is situated on the eastern edge of Svitavy. The building is non-cellular, it has three floors and a flat green roof. Three floors fulfilling matter with mainly administrative function is connected with two floors blocks fire station with an indoor gym. Above the floor containing garages for emergency vehicles facilities for the emergency unit are placed with a curtain that creates fading of the emergency door. The matter of the gym is optically separated from the station and highlighted with a volume narrow neck and height elevation. In the station there are training places and places for general physical preparation. The buildings are located in a sloping terrain. The ground fire station has a heliport. The establishment supporting columns of the building are for made of prefabricated calyx, and are concreted into monolithic foundation pads. Infill wall vertical bearing and non-bearing structures are designed from clay blocks type THERM. The bearing system is reinforced concrete prefabricated frame. Horizontally bearing structures are designed from prestressed hollow core slabs. The building envelope is made of a curtain wall in dark grey and red combined with a light contact thermal insulation system used on the indoor gym. The envelopes are in the administrative part and the part of the station divided by a glazed area. In the workshops and technology room the envelope is divided by lamellae. Usually there are 13 firemen during one shift, in three shifts there work 39 firemen all together. There are supposed to be 17 employees in the administrative department.
227	Modernizace bytového domu Vlhká 22, Brno / Modernization of apartment house Vlhká 22, Brno Neduchal, Zbyněk January 2020 (has links) The diploma thesis processes project documentation in the stage of construction for modernization of an apartment house near the center on the street Vlhká 22 in Brno. The building is divided into four residential floors and nonresidential basement and attic. On the first floor there are two residential units and the other four residential units. The foundation structures are made of solid bricks. The vertical load-bearing and non-load-bearing structures are also made of solid bricks. Exceptionally drywall partitions. In the basement, the ceiling structures are made of brick barrel vaults, above the above-ground floors there are wooden beamed ceilings. The roof structure of the building is made of purlin system with standing stool and covering of ceramic roof tiles. Three additional housing units will be built in the attic. In the basement, the masonry will be undercut by a chain saw, partly by pressure grouting and partly by a new layer with a waterproofing layer. All wood-beamed ceilings will be replaced with prefabricated ceiling beams with aerated concrete inserts without overhead slab. The garden part of the building will be insulated with mineral wool. The roof structure will be constructed from the street side as a shed roof and in the garden part a flat roof with a gradient layer of expanded polystyrene thermal insulation and a waterproofing layer of thermoplastic poleolefin.
228	Vícepodlažní dřevostavba / Multi-storey Wooden Building Macháčková, Eva January 2013 (has links) Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.
229	Centrum vodního lyžování Soběslav / Center of water skiing Soběslav Veselý, Tomáš January 2017 (has links) The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.
230	Zdravotnické středisko Hlinsko / Medical center Hlinsko Pilný, Ondřej January 2018 (has links) This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.

Search results