1 |
Substrate integrated waveguide antenna systemsSalem Hesari, Sara 29 January 2019 (has links)
Due to high demand for planar structures with low loss, a considerable amount
of research has been done to the design of substrate integrated waveguide (SIW)
components in the mm-wave and microwave range. SIW has many advantages in
comparison to conventional waveguides and microstrip lines, such as compact and
planar structure, ease of fabrication, low radiation loss, high power handling ability
and low cost which makes it a very promising technology for current and future
systems operating in K-band and above. Therefore, all the work presented in this
dissertation focuses on SIW technology. Five di erent antenna systems are proposed
to verify the advantages of using SIW technology.
First, a novel K-band end- re SIW circularly polarized (CP) antenna system on
a single layer printed-circuit board is proposed. A high gain SIW H-plane horn and a
Vivaldi antenna are developed to produce two orthogonal polarizations in the plane of
the substrate. CP antennas have become very popular because of their unique characteristics and their applications in satellites, radars and wireless communications.
Second, a K-band front-end system for tracking applications is presented. The circuit comprises an antenna array of two Vivaldi antennas, a frequency-selective power combiner, and two frequency-selective SIW crossovers, which eliminate the need for subsequent ltering. The integration of monopulse systems in planar, printed circuit
SIW technology combined with the added bene ts of ltering functions is of great importance to the antennas and propagation community.
Third, a phased array antenna system consisting of 24 radiating element is designed
as feed system for reflector antennas in radio astronomy applications. A Ku-band antipodal dipole antenna with wide bandwidth, low cross-polarization and wide beamwidth is suggested as the radiating element.
Forth, four di erent right-angled power dividers including in-phase and out-of-phase
dividers as feed systems for antenna arrays are introduced. TE10 - to - TEq0 mode transducers are used for obtaining two, three, and four output dividers with phase control ability at K- and Ka-band. This feature is practical, for instance, when designing tracking systems since they are employed to obtain controllable phase distributions over the output ports.
Fifth, a Ku-band beam steering antenna system which is applicable to use for wireless communications, radar systems, and also 5G applications is proposed. This antenna system uses variable reflection-type phase shifters which electrically steer the beam over a 50-degree scan range.
Therefore, the SIW technology's reliability and also promising behavior in the microwave frequency range is proven for di erent applications. / Graduate
|
2 |
UWB Antennas for Wall Penetrating Radar SystemsJavashvili, Otar January 2009 (has links)
<p>Basic properties and new design principles of ultra wideband Vivaldi antennas are presentedand discussed in this paper. The focus will be on the modeling of Vivaldi antenna design curves, by which it is constructed; its simulation results, realization and the measurements.</p><p>According to the aim of this research the discussion starts with the review of the previous researches done for Vivaldi antennas. Introductory part of the report also contains the problem description for the current project and the classification of the goals to be achieved. As a theoretical review, the discussion initiates with the definitions anddescription of basic parameters of the antennas and covers a short presentation of UWBpulse-based radar system. The attention will be focused on UWB signals behavior and characterization, their propagation principles and basic troubles stands nowadays. As anapplication the wall penetrating Radar systems will be considered. The major part of thereport holds on the investigation of the design principles of Vivaldi Antenna andoptimization of the key parameters for achieving the best performance for radar. Theending part of the report shows the simulations and measurement results and theircomparisons following with conclusions/discussions.</p><p>The report will be supportive for the antenna designers, who work for UWB systems andparticularly for Vivaldi antennas, as long as there are showing up detailed descriptions ofVivaldi antenna characteristics depending on its shape and substrate properties. The modelfor designing Vivaldi antennas, given in this project, can successfully be applied for almostall the cases used in practice nowadays.</p>
|
3 |
UWB Antennas for Wall Penetrating Radar SystemsJavashvili, Otar January 2009 (has links)
Basic properties and new design principles of ultra wideband Vivaldi antennas are presentedand discussed in this paper. The focus will be on the modeling of Vivaldi antenna design curves, by which it is constructed; its simulation results, realization and the measurements. According to the aim of this research the discussion starts with the review of the previous researches done for Vivaldi antennas. Introductory part of the report also contains the problem description for the current project and the classification of the goals to be achieved. As a theoretical review, the discussion initiates with the definitions anddescription of basic parameters of the antennas and covers a short presentation of UWBpulse-based radar system. The attention will be focused on UWB signals behavior and characterization, their propagation principles and basic troubles stands nowadays. As anapplication the wall penetrating Radar systems will be considered. The major part of thereport holds on the investigation of the design principles of Vivaldi Antenna andoptimization of the key parameters for achieving the best performance for radar. Theending part of the report shows the simulations and measurement results and theircomparisons following with conclusions/discussions. The report will be supportive for the antenna designers, who work for UWB systems andparticularly for Vivaldi antennas, as long as there are showing up detailed descriptions ofVivaldi antenna characteristics depending on its shape and substrate properties. The modelfor designing Vivaldi antennas, given in this project, can successfully be applied for almostall the cases used in practice nowadays.
|
4 |
Návrh 3D Vivaldiho anténní řady pro radarové aplikace / Design of 3D Vivaldi antenna array for radar applicationsKašpar, Petr January 2015 (has links)
This master thesis deals with a design of Vivaldi antenna due to its broadband properties suitable for radar applications. The folding of single Vivaldi antenna element into 2D antenna array we achieved required radiation properties. Appropriate design of feeding structure realized by SIW technology we obtained suppression of side lobes and deflection of the main lobe. The work also includes design of 3D Vivaldi antenna array. Modeling, simulation and optimization of antenna array were performed in CST Microwave Studio.
|
5 |
Bladder Monitoring Using Ultra-Wideband Radar and Vivaldi AntennaJonsson, Erica, Kovács, Attila January 2023 (has links)
Millions worldwide cannot tell when their bladder is nearing total capacity. The catheter, a tube to empty the bladder, is a vital part of life for many people. A catheter is, however, not a comfortable option, and it is the most common cause of infection in people staying in hospitals. This thesis aims to make the process more comfortable and non-invasive. The proposed idea is to use a UWB radar system with Vivaldi antennas to monitor the bladder state. Research shows that UWB radars can see a difference between a full and an empty phantom bladder. However, current research that explores the usage of UWB radar systems to monitor the bladder state does not consider regulations other than the ones set by FCC. They also only perform experiments on a phantom bladder. This thesis investigates the practical viability of using a UWB radar system designed per the restricted regulations set by Post- och Telestyrelsen. The thesis includes the design, simulations,manufacturing, and testing of the antennas as well as the radar system. The goal was to test the system in both simulations, with a phantom model and with a human body as a target, to advance the current state of research and determine its practicality forreal-life applications. The simulations showed a significant difference in reflections between full and empty bladders. The measurements from the experiments showed a slight difference in amplitude as well, although not as great as predicted due to a longer pulse. The Vivaldi antennas performed as expected according to both theory and simulations and they should work as desired in further experiments that use a UWB radar to monitor the bladder state per the PTS regulations. This thesis is solely based on an original idea and has not been influenced or derived from any external company.
|
6 |
Dual-polarized fully-metallic Vivaldi antenna array in a triangular lattice / Dubbelpolariserad helmetallisk Vivaldi-antennuppsättning i ett triangulärt gitterOrgeira Alvarez, Omar January 2022 (has links)
New mobile communication generations need electromagnetic sensors capable of steering their high-directive beams towards the users. Conventional base stations use square lattice phased arrays to accomplish this task. These arrays are composed of a large number of radiating elements to achieve the required high directivity and scanning capabilities. These systems are of high complexity and cost because after each element there is a large electronic chain. Therefore, it is of high interest to reduce the element count in the aperture of the array while maintaining its performance. Instead of using a square lattice to place the radiating elements, a triangular lattice can be used. It is proven that a triangular lattice optimally samples the aperture and reduces the element count by up to a 15.5%, hence reducing the cost and complexity of the complete antenna system. However, dual-polarized Vivaldi elements do not conform naturally to this kind of lattice and, consequently, they have not been thoroughly studied in the literature despite this well-known advantage. In this work, a novel dual-polarized fully-metallic Vivaldi element is presented. Also, the feeding network for this element is designed in the form of a suspended stripline. This technology presents low loss in comparison with a conventional stripline or microstrip. The radiating elements can be manufactured in a single piece, and they are easily integrated with the stripline feeding by just placing one on top of the other. An infinite array analysis, i.e. unit cell analysis, was performed to show the correct performance of the triangular lattice array and the proposed dual-polarized Vivaldi antenna design. A good matching was achieved over the entire band from 6 to 15 GHz for all the scanning planes and up to 60◦ scanning angle. The active element patterns show the good behaviour of the array, i.e. the absence of scan blindness and grating lobes. Finally, the unit cell analysis is compared to a finite 11×11 array for verification. / Nya generationer av mobilkommunikation behöver elektromagnetiska sensorer som kan styra sin högriktade signalenergi mot användarna. Konventionella basstationer använder kvadratiska gitterfasuppsättningar. Dessa arrayer är sammansatta av ett stort antal strålningselement för att uppnå den erforderliga höga riktningsförmågan och avsökningskapaciteten. Dessa system är av hög komplexitet och kostnad eftersom det efter varje element finns en lång elektronisk kedja. Därför är det av stort intresse att minska antalet element i arrayens apertur samtidigt som dess prestanda bibehålls. Istället för att använda ett kvadratiskt gitter för att placera de strålande elementen, kan ett triangulärt gitter användas. Det är bevisat att ett triangulärt gitter optimalt samplar aperturen och minskar elementantalet med upp till 15.5%, vilket minskar kostnaden och komplexiteten för hela antennsystemet. Dubbelpolariserade Vivaldi-element överensstämmer dock inte naturligt med denna typ av triangulära symmetri och följaktligen har de inte studerats grundligt i litteraturen trots denna välkända fördel. I detta arbete presenteras ett nytt dubbelpolariserat fullt metalliskt Vivaldi-element. Matningsnätverket för detta element är också utformat i form av en upphängd stripline. Denna metod ger låga förluster i jämförelse med en konventionell stripline eller mikrostrip. En oändlig array-analys, d.v.s. enhetscell, utfördes för att visa den korrekta prestandan för den triangulära gittermatrisen. En bra matchning uppnåddes över hela bandet från 6 till 15 GHz för alla skanningsplan och upp till 60° utstyrningsvinkel. Aktiva elementstrålnings diagrammet visar konfigurationens lovande egenskaper, d.v.s. ingen skanningsblindhet eller gallerlober. Slutligen jämförs enhetscellanalysen med en ändlig 11x11 array för verifiering.
|
7 |
Compact-size linearly tapered slot antenna for portable ultra-wideband imaging systemsZhu, F., Gao, S., Ho, A.T.S., See, Chan H., Abd-Alhameed, Raed, Li, J., Xu, J. 10 August 2012 (has links)
No / A compact-size asymmetrical linearly tapered slot antenna required for portable ultra-wideband (UWB) imaging systems is presented. The total antenna size is reduced compared with the conventional linearly tapered slot antenna by using a triangular slot on the left-hand side of the tapered-shaped radiator, whereas introducing a corrugated pattern of cuts on the right side. The antenna operates over a wide bandwidth extending from 3.1 to 10.6 GHz with a maximum gain of 8.5 dBi. Stable radiation patterns are observed across the operational bandwidth, with cross-polarization levels below 20 dB. The realized antenna structure occupies a volume of 35 x 36 x 0.8 mm3, and possesses the essential time domain fidelity needed for UWB imaging applications. (c) 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.
|
8 |
Antény pro pásmo milimetrových vln / Antennas for milimeter-wave bandsPítra, Kamil January 2010 (has links)
This thesis describes design and experimental verification of three types of the wideband antenna Bow-tie antenna, Vivaldi antenna and Spiral antenna. The tracked parameters are bandwidth, input impedance, gain and directivity patterns. Next step is design of millimeter-wave horn antennas. Attention is turned to the proper construction of a wideband feeder of the horn. For the final antenna structure, a bow-tie dipole and a Vivaldi antenna were chosen. The antenna construction is aimed to provide a wide bandwidth on one hand and a high gain on the other hand.
|
9 |
Scann Loss Reduction on Phased Array Antenna / Scan Loss Reduction på Phased Array AntennZhang, Wanyu January 2022 (has links)
Phased array antennas with small size and light weight are proposed to make signal transmitting more efficiently and accurately. These antennas have such advantages that they can realize beam scanning over a large range, accurately track and identify targets within the observation range. In beam scanning, the scan loss which is the difference between the scanned gain and broadside gain has a great impact on the performance of phased array antennas. This thesis aims to study how to reduce the scan loss while the beam is scanned over a wide range. One of the methods to reduce the scan loss is to widen the beam-width of the embedded radiation pattern. With the wide beam-width, the gain reduction due to beam scanning would be small. We propose a method to replace a conventional half-wavelength unit-cell in an array with a sub-array composed of 5 miniaturized elements with special phase/amplitude distribution. The size of the sub-array is finely tuned in this thesis to achieve the goal of wide beam-width without any grating lobe. Then, in order to further expand the beam-width, the ideal power divider is utilized to apply specific weight to the sub-array. The simulation result shows that the maximum scan loss for the considered case is 3.67dB over ±80° scan range with an voltage amplitude distribution of [0.234, 0.64, 0.26, 0.64, 0.234] (1) and a phase of 88° between the 5 sub-array elements, which can be realized by the ideal power divider. If the allowed gain reduction is relaxed to 5dB, the scan coverage can be extended to ±89°. / Fasstyrda antenner med eu liten storlek och låg vikt har förslegits för att göra signalöverföring effektivt och korrekt. Dessa antenner har stora fördelar i att de kan realisera stort område. De kan också följa och identifiera mål inom observationsområdet. Vid strålskanning är skanningsförlusten, som är skillnaden mellan den skannade förstärkningen och förstärkningen vid den breda sidan, följande har stor inverkan på prestandan hos fasstyrda antenner. Denna avhandling syftar till att studera hur man minskar skanningsförlusten när strålen skannar inom ett brett skanningsområde. En av metoderna för att minska skanningsförlusten är att bredda strålbredden i det inbyggda strålningsmönstret. Med en bred strålbredd blir förstärkningsminskningen på grund av strålskanning liten. Vi föreslår en metod för att ersätta en konventionell halvvågig enhetscell i en matris med en delmatris som består av 5 miniatyriserade element med speciell fas/amplitudfördelning. Storleken på delarrayen är finjusterad i denna avhandling för att uppnå målet med bred strålbredd utan någon gitterlob. För att ytterligare utöka strålbredden används sedan den ideala effektdelaren för att ge subarrayet en särskild vikt. Simuleringsresultatet visar att den maximala skanningsförlusten för det undersökta fallet är 3,67dB inom ±80° täckningsvinkel med amplitudfördelning av [0.234, 0.64, 0.26, 0.64, 0.234] (2) och fas av 88°, som kan realiseras av den idealiska effektdelaren. Om kravet på minskningen av förstårluing sänks till 5dB, kan täckningen breddas till ±89°.
|
10 |
Realization of Miniaturized Multi-/Wideband Microwave Front-EndsAl Shamaileh, Khair Ayman January 2015 (has links)
No description available.
|
Page generated in 0.0959 seconds