<p> Wireless LAN mesh networks (WMNs) are a cost effective way of deploying wireless LAN (WLAN) coverage over extended areas. As WMNs become more populated, scalability issues may arise due to the co-channel interference which is inherent in publicly available RF (radio frequency) channels. This co-channel interference can severely degrade network capacity and link reliability and may eventually make it impossible to operate with the frequency channels for which the network was originally designed. In this thesis, this problem is addressed by selectively installing supplementary free-space optical (FSO) links when RF link performance has deteriorated. The frequency assignment problem is solved using a heuristic technique based on a genetic algorithm. In order to determine the quality of the results, the proposed algorithm is compared with a lower bound solution obtained using an Integer Linear Programming (ILP) formulation.</p> <p> Another advantage of FSO links is that they may reduce node power consumption compared with conventional RF links. This may be an important consideration in cases where power consumption at the nodes is important, such as in solar powered mesh networks. Power consumption estimates of RF and FSO links are obtained and compared for different data rates. This data is then used along with historical solar insolation data to estimate the solar panel and battery sizes required to guarantee a given node outage probability. The results show that no extra provisioning is required for replacing the deployed wireless nodes with new FSO links.</p> / Thesis / Master of Applied Science (MASc)

This research considers the transmission of real-time data within a wireless local area network (WLAN). Exact and approximate analytic network evaluation techniques are examined. The suitability of using a given technique in a particular situation is discussed. Simulation models are developed to study the performance of our protocol RT-MAC (real-time medium access control). RT-MAC is a novel, simple, and elegant MAC protocol for use in transmitting real-time data in point to point ad hoc WLAN. Our enhancement of IEEE 802.11, RT-MAC, achieves dramatic reductions in mean delay, missed deadlines, and packet collisions by selectively discarding packets and sharing station state information. For example, in a 50 station network with a normalized offered load of 0.7, mean delay is reduced from more than 14 seconds to less than 45 ms, late packets are reduced from 76% to less than 1%, and packet collisions are reduced from 36% to less than 1%. Stations using RT-MAC are interoperable with stations using IEEE 802.11. In networks with both RT-MAC and IEEE 802.11 stations, significant performance improvements were seen even when more than half of the stations in the network were not RT-MAC stations. The effect of the wireless channel and its impact on the ability of a WLAN to meet packet deadlines is evaluated. It is found that, in some cases, other factors such as the number of stations in the network and the offered load are more significant than the condition of the wireless channel. Regression models are developed from simulation data to predict network behavior in terms of throughput, mean delay, missed deadline ratio, and collision ratio. Telemetry, avionics, and packetized voice traffic models are considered. The applicability of this research is not limited to real-time wireless networks. Indeed, the collision reduction algorithm of RT-MAC is independent of the data being transported. Furthermore, RT-MAC would perform equally well in wired networks. Incorporating the results of this research into existing protocols will result in immediate and dramatic improvements in network performance. / Ph. D.

Wireless networks provide communications to fixed, portable and mobile users and offer substantial flexibility to both end-users and service providers. Current cellular/PCS networks do not offer cost effective high data rate services for applications, such as, telematics, traffic surveillance and rescue operations. This research studies the feasibility and behavior of outdoor implementation of low-cost wireless LANs used for high mobility telematics and traffic surveillance. A multi-hop experimental wireless data network is designed and tested for this purpose. Outdoor field measurements show the wireless coverage and throughput patterns for static and mobile users. The results suggest that multi-hop wireless LANs can be used for high mobility applications if some protocols are improved. / Master of Science

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / The Central Test and Evaluation Investment Program (CTEIP) Integrated Network Enhanced Telemetry (iNET) program is currently testing a wireless local area networking (WLAN) in an L-band telemetry (TM) channel to evaluate the feasibility and capabilities of enhancing traditional TM methods in a seamless wide area network (WAN). Several advantages of networking are real-time command and control of instrumentation formats, quick-look acquisition, data retransmission and recovery (gapless TM) and test point real-time verification. These networking functions, and all others, need to be tested and evaluated. The iNET team is developing a WLAN based on 802.x technologies to test the feasibility of the enhanced telemetry implementation for flight testing.

No description available.

This paper proposes novel antenna designs for cellular phones and WLAN (Wireless LAN) applications. For cellular phones, a dual- frequency PIFA (Planar Inverted-F Antenna) loaded with a chip inductor is constructed. In order to decrease the construction cost, PIFAs without a loading chip inductor for GMS/DCS phones are devised. Besides, a PIFA-monopole antenna for GSM/DCS/PCS is also proposed. For WLAN application, a dual-band PIFA for 2.4/5.8 GHz and a dual-band integrated monopole antenna for 2.4/5.2 GHz are shown. Finally, a novel metal-plate WLAN antenna, having a simple structure and being easy to construct with low cost, is presented.

Frequency synthesizer is a key building block of fully-integrated wireless communication systems. Design of a frequency synthesizer requires the understanding of not only the circuit-level but also of the transceiver system-level considerations. This dissertation presents a full cycle of the synthesizer design procedure starting from the interpretation of standards to the testing and measurement results. A new methodology of interpreting communication standards into low level circuit specifications is developed to clarify how the requirements are calculated. A detailed procedure to determine important design variables is presented incorporating the fundamental theory and non-ideal effects such as phase noise and reference spurs. The design procedure can be easily adopted for different applications. A BiCMOS frequency synthesizer compliant for both wireless local area network (WLAN) 802.11a and 802.11b standards is presented as a design example. The two standards are carefully studied according to the proposed standard interpretation method. In order to satisfy stringent requirements due to the multi-standard architecture, an improved adaptive dual-loop phase-locked loop (PLL) architecture is proposed. The proposed improvements include a new loop filter topology with an active capacitance multiplier and a tunable dead zone circuit. These improvements are crucial for monolithic integration of the synthesizer with no off-chip components. The proposed architecture extends the operation limit of conventional integerN type synthesizers by providing better reference spur rejection and settling time performance while making it more suitable for monolithic integration. It opens a new possibility of using an integer-N architecture for various other communication standards, while maintaining the benefit of the integer-N architecture; an optimal performance in area and power consumption.

Στην παρούσα διδακτορική διατριβή παρουσιάζεται µία µελέτη τυπωµένων κεραιών γεωµετρίας φράκταλ για ασύρµατες τερµατικές συσκευές, µε έµφαση στις εφαρµογές των κινητών επικοινωνιών και των ασύρµατων τοπικών δικτύων. Η ραγδαία εξέλιξη των ασύρµατων επικοινωνιών είχε ως αποτέλεσµα την σηµαντική µείωση των διαστάσεων των τερµατικών συσκευών, την ολοκλήρωση διαφορετικών υπηρεσιών διαφορετικών συχνοτήτων λειτουργίας στην ίδια συσκευή και την ανάγκη πολλαπλών κεραιών για την αντιµετώπιση του φαινοµένου της διάλειψης και της διασυµβολικής παρεµβολής του ασύρµατου καναλιού. Αυτές οι εξελίξεις έθεσαν καινούργιες απαιτήσεις στην σχεδίαση της κεραίας οδηγώντας στην ανάγκη κεραιών εξαιρετικά µικρών διαστάσεων, πολυσυχνοτικών, χαµηλού κόστους, υψηλής απόδοσης και επιθυµητών χαρακτηριστικών ακτινοβολίας κατά περίπτωση. Στα πλαίσια της διατριβής διερευνήθηκε η ικανότητα σµίκρυνσης και παραγωγής πολυσυχνοτικής συµπεριφοράς που παρουσιάζουν τα σχήµατα γεωµετρίας φράκταλ αν χρησιµοποιηθούν σαν κεραίες. Αρχικά προτείνεται µία καινούργια κατηγορία κεραιών, οι τυπωµένες µονοπολικές κεραίες γεωµετρίας φράκταλ και συγκρίνονται διάφορες γεωµετρίες φράκταλ τόσο ως προς την ικανότητα σµίκρυνσης όσο και ως προς τα χαρακτηριστικά εµπέδησης και ακτινοβολίας που παρουσιάζουν. Εξετάζεται ο καθοριστικός ρόλος του επιπέδου γείωσης αυτής της κατηγορίας κεραιών και εξάγονται γενικά συµπεράσµατα για την εκµετάλλευσή του µε τον βέλτιστο δυνατό τρόπο. Επιπλέον διερευνήθηκε η χρήση των σχηµάτων φράκταλ για την µείωση των διαστάσεων των µικροταινιακών κεραιών. Η φράκταλ ορθογώνια καµπύλη προτείνεται για εφαρµογές γραµµικής και κυκλικής πόλωσης, η οποία παρουσιάζει σηµαντική ικανότητα σµίκρυνσης και προσφέρει πολλούς σχεδιαστικούς βαθµούς ελευθερίας που µπορούν να χρησιµοποιηθούν είτε για περαιτέρω µείωση του µεγέθους της είτε για την διατήρηση του εύρους ζώνης της σε ικανοποιητικά επίπεδα. Λόγω του συµπαγούς σχήµατος και των επιθυµητών χαρακτηριστικών των τυπωµένων µονοπολικών και µικροταινιακών κεραιών φράκταλ, µελετάται περαιτέρω η χρησιµοποίησή τους για την υλοποίηση συστηµάτων πολλαπλών κεραιών µε σκοπό την βελτίωση της ποιότητας του λαµβανοµένου σήµατος. Ακόµη µελετάται η ικανότητα παραγωγής πολυσυχνοτικής συµπεριφοράς της µονοπολικής κεραίας Sierpinski και προτείνεται µία τροποποίηση η οποία µειώνει σηµαντικά το µέγεθος της κεραίας και καθίσταται δυνατόν να τυπωθεί σε ασύρµατες συσκευές µικρού µεγέθους. Επιπλέον, διερευνώνται διάφορες τεχνικές για να ελεγχθούν οι συχνότητες συντονισµού της κεραίας και να συµπέσουν µε τις εκάστοτε επιθυµητές µπάντες λειτουργίας. Τέλος εξετάζεται η επίδραση των διαστάσεων του επιπέδου γείωσης στα χαρακτηριστικά εµπέδησης του συστήµατος. / This Ph.D. thesis presents a comprehensive study on printed fractal antennas for wireless terminal devices, with emphasis on mobile and wireless local area network applications. The rapid evolution of wireless communications resulted in a decrease of terminal devices’ dimensions, in the integration of different services, operating in different spectra, in the same device and finally in the deployment of multiple antenna systems to mitigate the phenomena of fading and intersymbol interference of wireless channel. These evolutions, in turn, set new demands on antenna’s design leading to the necessity of exceptionally small, multiband and low cost radiators possessing high efficiency and desirable radiation characteristics. In the context of the present work, the miniaturization and multiband ability of fractal shaped antennas is examined. Initially a new antenna type is proposed, that of printed fractal monopole antennas, and several innovative fractal shaped monopoles are compared with respect to their miniaturization ability, input impedance and radiation characteristics. The important role of the ground plane is also investigated and general conclusions are drawn to exploit its effects in the most appropriate way. The application of fractals on microstrip antennas was further studied with the fractal rectangular curve (frc) microstrip antenna being proposed for linear and circular polarization applications. The frc microstrip antenna proved to possess a noticeable miniaturization ability and a geometry with several degrees of freedom that can be used either to reduce further its size, or to keep the bandwidth to a satisfactory level. Due to the compact size and desirable electrical characteristics of printed monopole and microstrip fractal antennas, they were further considered for the implementation of multi element antenna systems in order to improve the SNR of the received signal. Finally, the multiband ability of the Sierpinski monopole antenna is investigated and a modification is proposed to decrease the overall antenna height making it feasible to be printed in small terminal devices. Several techniques to allocate the desirable bands of interest are also discussed along with the effect the ground plane dimension’s on the system’s input impedance.

The IEEE 802.11b standard is today the only commonly used standard in Europe for fast wireless networks. This makes it possible to connect computers to networks in places where it is not possible to use wires. Examples of such situations are internet access at airports, communication in emergency areas or for military communication. Common for all these situations is that network security is important. This thesis consists of two different parts. The first part handles the security mechanisms and the second part is an evaluation of the possibilities to use IEEE 802.11b in embedded applications. The part that handles the security includes the security mechanisms found in the standard, flaws in these mechanisms and methods that try to reduce these problems.

No / For decades, the development of the Internet was driven by the purpose of providing applications to non-mobile users. No specific Quality of Service (QoS) requirement is necessary, other than ensuring reliability in the end-to-end data transfers. As such, best effort service model was deemed more than appropriate to satisfy the users' needs. Nevertheless, the scenario has changed in the last few years. A new population of nomadic users, who requires access to Internet services regardless of their location and mode of transportation is growing, while new typologies of Internet applications are being continuously developed, in which best effort service level may no longer be adequate. The SUITED project has been devised to address the emerging issues generated by this new and challenging scenario. SUITED aims at contributing towards the design and deployment of the Global Mobile Broadband System (GMBS), a unique satellite/terrestrial infrastructure, which will ensure that nomadic users have access to Internet services with a negotiated QoS. An overview of the main results achieved in the SUITED project is provided in this article. Some of the most innovative solutions developed by the SUITED team for the joint management of global mobility and end-to-end QoS support are presented. The SUITED demonstrator platform, which was developed to validate the system specifications, is also described. Finally, the results of the experimental measurement campaigns carried out with this platform are reported.