The theme of this master thesis is „Energy supply to the site Technická 2“. This thesis is divided into several parts. First we will get in touch with concept of combined heat and power and also with principle of photovoltaic electricity production. We will continue with description of site before and after reconstruction. Then we will follow with analyze the effect of reconstruction on energy consumption. In the end we will make some suggestions for using the local source of heat and electricity in Faculty of mechanical engineering, Brno university of technology. All suggestions will be analyzed from energy and economic point of view.

The theoretical part is focused on lights, notions and calculations in the area of light technology, basic lightning sources and lamps. This work is also about the principle of lightning measuring. The main aim of the work is design of a new artificial lightning system in a High school agriculture in Prerov. At first, the control measuring of existing lightning was done which is mentioned in this work. From the results of control measuring is clear, that existing lighting system in classroom does not suit requirements, which are mentioned in the valid technical norm. Design of a new lightning system meets the requirements in all of the rooms in the building of school. Design of lightning system was done in two variants. The first variant uses lamps with fluorescent tube light sources. The second variant uses lamps with LED light sources. Also is here evaluated financial difficulty of possible installation and comparation of each variants with respect energetic difficulty.

This thesis deals with the theoretical and practical part of the phenomenon of acoustic emission. The thesis examined the theoretical foundations of this phenomenon and also described the equipment that was used in the laboratory of VUT in Brno to perform measurements. Then measurements and their analysis were described. Several possible errors that occurred during the work on the thesis were also described. Error description is the basis for error-free laboratory testing and for improving the quality of laboratory testing.

This thesis is focused on comparison of parameters of light sources (halogen, xenon, LED) installed in Skoda Octavia 3rd generation. The opening part solves analysis of the current state of lighting technology and its impact on traffic safety. The next part is focused on general parameters of light, construction of light sources, optical systems and adaptation of the human eye to various light conditions, especially contrast. The practical part is focused on comparing the contrast values of individual light sources in relation to the dark and lightly dressed pedestrian in the area without artificial lighting.

This Diploma thesis deals with the design of induction heating inverter. The main subject is optimalization for blacksmiths. There is described the designing procedure for power components and also designing of control part. Then prototype of 10 kW induction heater was made.

The diploma thesis is focused on the evaluation of a photovoltaic power plant in the company premises. The first chapters briefly discuss the theory of electricity generation using photovoltaic panels. It describes the principle of operation of photovoltaic panels, history, production, etc. In the practical part of the thesis we focus on the evaluation of the company's photovoltaic power plant when comparing real data with simulations.

The aim of this diploma thesis is to design two different switching power supply circuits with integrated circuits suitable for controlling of LED. The theoretical part describes the principles of two main switching converters topologies – buck and boost. Furthermore, a universal H-bridge structure of switching supply is described. This is compared with the typical switching supply design. Based on specified requirements, two circuits are designed with selected IO which are suitable for using in the automotive industry. Their function and typical schema are described. In the practical part is realized design with both selected IC, choosing components and layout PCB. Set of tests are carried out with manufactured samples. Based on measured results are performed optimalization of samples, which are tested also. In the end of this thesis both samples are compared in terms of function, efficiency and EMC.

Theoretical part of this thesis describes LEDs and other circuitry used for LED light design. LED light is designed, manufactured and put into operation. This thesis examines possibilities of measuring exterior light and its key parameters. The device uses two sets of LEDs – warm white and cold white to create light with parameters dependent on exterior light. LEDs are driven by constant current sources that are designed, manufactured and examined in this thesis. The device is microprocessor-controlled, which allows to switch between multiple modes of operation. Flyback SMPS is used to power the microcontroller.

In few picked sources where ammonia occurs in an under-limited amount ,according to valid legislation, there will its outflow be modeled in various atmospheric conditions and its toxicity will be compared with other mostly used toxic substances. The danger for people living in the surroundings of under-limited sources will be evaluated from the results and the way for better safeness will be suggested.

This work deals with questions of IP net communication, with using metod Source-Specific Multicast. It focused on questions of registration, unregistration and administration of clients in multicast group and IGMP protocol, which is made for this communication. Work deals also about problems of signalization between source of data and clients of multicast group.In the introduction of this work questions of communications in multicast are analyse. I tis followed by the chapter focused on the specific metod of multicast – Source Specific Multicast (SSM). Next chapter is based on the protocols in SSM, which are used for distribution of data stream in source to clients direction and also in the reverse direction. The net chapter deals with signalization of communication in SSM. It specializes for reflection and summarization metods, which are used here. This chapter also shows basic matematics formules for sending signalization packets and proposes other solutions and ways for simplify communication and minimalize delay, which is for signallization very important. After that, the work deals with differences between these two metods of signalization. The aplicationis builded in practical part of work from the knowlidge of theory from previous chapters and it simulates the real communication between data source and clients situated to multicast group. This communication is explained in MSC diagrams. The aplication also simulates both used metods of signalization and real count of cients in multicast group. The results of simulation are interpreted in the last part of work.