Understanding the effects of the process parameters on the distribution behaviour of antimony between metal and slag in the iron blast furnace is critical to develop a universal method of controlling temper embrittlement in commercially pure low alloy steels.

Appressorium-mediated plant infection is a common strategy used by many plant pathogenic fungi. Understanding the underlying genetic network that controls cellular differentiation of appressorium is therefore pivotal to design durable resistance strategies for these devastating pathogens. This thesis describes four published studies, which investigate the role of septin GTPases in infection and the role of secretion during plant tissue invasion by the rice blast pathogen Magnaporthe oryzae. Appressorium development involves a series of morphogenetic changes that are tightly regulated by cell cycle checkpoints. Entry into mitosis allows differentiation of an appressorium, while penetration peg emergence appears to require progression through subsequent cell cycle checkpoints and cytokinesis. The studies presented here show that symmetry-breaking events that occur during appressorium differentiation are mediated by scaffold proteins, named septins. Septin GTPases recruit actomyosin ring components during septation and define the site of cytokinesis. They also recruit a toroidal cortical F-actin network to the appressorium pore that provides cortical rigidity to facilitate plant infection. Septins act as diffusion barriers for proteins that mediate membrane curvature necessary for penetration peg formation. Repolarization of the F-actin cytoskeleton at the appressorium pore is essential for plant penetration and is controlled by cell polarity regulators, such as Cdc42 and Chm1. Septin-mediated plant infection is regulated by NADPH oxidase (Nox) dependent generation of reactive oxygen species (ROS). The Nox2/NoxR complex is essential for septin organization at the appressorium pore. Septins are therefore key determinants of appressorium repolarization. I also report an investigation of fungal secretory processes during tissue invasion and present evidence that distinct pathways are involved in effector secretion by Magnaporthe oryzae. A BrefeldinA-sensitive pathway is necessary for secretion of apoplastic effectors, such as Bas4 and Slp1, while a BrefeldinA-insensitive pathway is necessary for secretion of effectors destined for delivery to rice cells.

BACKGROUND:The rhizome, the original stem of land plants, enables species to invade new territory and is a critical component of perenniality, especially in grasses. Red rice (Oryza longistaminata) is a perennial wild rice species with many valuable traits that could be used to improve cultivated rice cultivars, including rhizomatousness, disease resistance and drought tolerance. Despite these features, little is known about the molecular mechanisms that contribute to rhizome growth, development and function in this plant.RESULTS:We used an integrated approach to compare the transcriptome, proteome and metabolome of the rhizome to other tissues of red rice. 116 Gb of transcriptome sequence was obtained from various tissues and used to identify rhizome-specific and preferentially expressed genes, including transcription factors and hormone metabolism and stress response-related genes. Proteomics and metabolomics approaches identified 41 proteins and more than 100 primary metabolites and plant hormones with rhizome preferential accumulation. Of particular interest was the identification of a large number of gene transcripts from Magnaportha oryzae, the fungus that causes rice blast disease in cultivated rice, even though the red rice plants showed no sign of disease.CONCLUSIONS:A significant set of genes, proteins and metabolites appear to be specifically or preferentially expressed in the rhizome of O. longistaminata. The presence of M. oryzae gene transcripts at a high level in apparently healthy plants suggests that red rice is resistant to this pathogen, and may be able to provide genes to cultivated rice that will enable resistance to rice blast disease.

Résumé : L’auto-cicatrisation des fissures des matériaux cimentaires présente un intérêt important pour améliorer leur durabilité (propriétés de transfert par exemple). L’impact du laitier de haut-fourneau sur ce phénomène a été peu étudié bien qu’il ait été observé sur des ouvrages du Génie Civil. Dans cette étude, la cinétique et l’amplitude de l’auto-cicatrisation ont été suivies par des essais non destructifs : la tomographie aux rayons X et la perméabilité à l’air, pour une fissuration créée à 7 jours et à 28 jours. Les résultats montrent que le laitier de haut-fourneau possède un potentiel d’auto-cicatrisation intéressant pouvant dépasser les résultats obtenus pour les formulations de référence sans laitier. Ce bon potentiel dépend des caractéristiques physico-chimiques des matériaux brutes et du potentiel d’hydratation de la formulation au cours du temps. De plus pour suivre l’auto-cicatrisation, un nouvel essai a été mis en place afin de fissurer les éprouvettes de mortier par retrait gêné et d’étudier l’auto-cicatrisation d’une fissure naturelle. Cet essai s’est avéré efficace sur la formulation de référence. Une caractérisation des produits de cicatrisation par MEB-EDS témoigne de la formation de nouveaux produits dans les fissures et de l’impact important des conditions de stockage sur le type de produits formés: des C-S-H pour un stockage sous eau et des carbonates de calcium pour un stockage en chambre humide (CO2 + eau). Les résultats de migration aux chlorures de nano-indentation montrent que ces produits de cicatrisation possèdent de bonnes propriétés de durabilité et des propriétés mécaniques à l’échelle microscopique intéressantes (pour le carbonate de calcium). Enfin, une modélisation du phénomène d’auto-cicatrisation est proposée au moyen du code de calcul de géochimie PHREEQC. L’étude a révélé le potentiel intéressant de PHREEQC pour modéliser l’auto-cicatrisation et en faire un outil de prédiction du phénomène. / Abstract : Self-healing of cementitious materials presents great interest to improve the durability of concrete structure (transfer properties for example). The impact of blast-furnace slag on this phenomenon is not yet clear even if the self-healing of concrete with blast-furnace slag was observed in building sites. To understand the blast-furnace slag influence, non-destructive methods were used to follow self-healing: X-ray tomography and gas permeability test. All specimens were cracked at 7 days and 28 days. The results show that the blast furnace slag has an interesting self-healing potential that can exceed the reference formulation results. This good potential depends on the physico-chemical characteristics of the raw materials and the hydration potential of the formulation over time. In addition to follow the self-healing, a new trial was set up to crack mortar specimens by restrained shrinkage and study the self-healing of a natural crack. In addition to follow the self-healing, a new trial was set up to crack mortar specimens by restrained shrinkage and study the self-healing of a natural crack. This test has proven effective over the reference formulation.The SEM with EDS analysis showed the formation of new products in the crack and the impact of storage conditions on these products : C-S-H for specimens stored in water and calcium carbonate for specimens stored in a damp chamber (CO2 + water). Migration chlorures and nano-indentation tests results showed that self-healing products had interesting durability properties and micro-mechanical properties (for calcium carbonate). Finally, self-healing modelling is proposed by means of geochemistry PHREEQC calculation code. The study revealed interesting potential PHREEQC to model self- healing phenomenon and make it a of predictive tool.

<p>Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline. The experiment was carried out in two sets, starting with batch experiments followed by a column study. The objective of the batch experiments was to find out how variations in pH affected the sorption capacity of the materials. The interval used during the test was from pH 5 to pH 10. The computer program VisualMinteq was used to evaluate the dominating sorption processes when the materials interacted with the solutions. Two different kinds of solutions were used in the batch experiment. One of them was the leachate, to which known concentrations of heavy metals were added (about 1 μM) and the other consisted of sodium nitrate, a solution without organic compounds, which was used as a reference. The sodium nitrate solution was also spiked with the same concentration of heavy metals as the leachate.</p><p>The results from the batch experiment showed that the sorption of heavy metals was lowered if the DOC level was high. No relation between pH and sorption ability could be found for the leachate, but for some metals in the sodium solution a higher pH improved the removal of heavy metals. The two materials that showed best results in the batch experiment were the blast-furnace slag and the sand with iron oxides. These materials were used in the column study. The olivine material was somewhat better than the nepheline in the batch experiment.</p><p>Four columns were used in the column study, two for each material. Leachate with heavy metals was pumped into the columns with a specific flow rate; at first a low flow rate was used and when half the experiment time had passed the flow rate was increased. The flow rates used were 0.12 m/24 h and 0.62 m/24 h. The outcome of the column experiment showed that the slag had the highest ability to adsorb metals. The metal sorption was over 60 percent for lead, cadmium and zinc, where the highest sorption was obtained for lead. No affects were noticed when the flow rate was increased.</p> / <p>I detta examensarbete har fyra olika reaktiva filtermaterials kapaciteter att ur deponilakvatten avskilja tungmetallerna bly, kadmium, koppar, kvicksilver, krom, nickel och zink testats. Deponilakvatten är ett avloppsvatten med höga halter organiskt material (DOC), högt pH och en hög buffertkapacitet. Dess sammansättning ställer stora krav på ett filter och närvaron av ligander påverkar sorptionprocesserna. Filtren som ingått i studien är kalciumoxiddopad masugnsslagg, järnoxidtäckt sand, olivin och nefelin.</p><p>Försöken utfördes i två delar, med inledande skakförsök och därefter kolonnförsök. I båda försöken användes lakvatten med en extra tillsats av tungmetaller. I skakförsöken användes även natriumnitrat; ett referensvatten utan organiska ligander, även det spikat med tungmetaller. I skakförsöken studerades avskiljningens pH-beroende för de olika filtren, med ett pH-intervall på ca 5 – 10. Därefter modellerades resultaten i jämviktsprogrammet VisualMinteq för att fastställa vilka processer som styr avskiljningen. Skakförsöken och kolonnförsöken utfördes båda i klimatrum vid 8 ºC, för att efterlikna markens naturliga temperatur.</p><p>Resultaten från skakförsöken visade att masugnsslagg och järnoxidsand gav bäst avskiljning för de flesta tungmetaller. Olivin och nefelin var sämre metallsorbenter, där olivin uppvisade något bättre resultat än nefelin. Inget tydligt pH-beroende för lakvattnet kunde utläsas, men för natriumnitratlösningen gav en pH-höjning en ökad sorption för vissa metaller. Den kemiska jämviktsmodelleringen visade att den dominerande processen i filtermaterialen var sorption på filterytorna. De två filtermaterialen som visade bäst resultat i skakförsöken (slagg och järnoxid) studerades vidare i kolonnförsök, där ett bestämt lakvattenflöde pumpades genom kolonner packade med materialen. Två olika flödeshastigheter testades (0,12 m/dygn och 0,62 m/dygn) och sorptionen av metaller analyserades. Slaggen uppvisade högst avskiljningskapacitet av de studerade filtren. De metaller som sorberades bäst var bly, kadmium och zink (över 60 % avskiljning), där den högsta sorptionen erhölls för bly. Gemensamt för både skak- och kolonnförsöken var att sorptionen försvårades då halten organiskt material (DOC) ökade, vilket beror på att DOC konkurrerar med de reaktiva ytorna på filtren om att binda den fria metalljonen. Ingen minskande avskiljningseffekt av en flödesökning kunde utläsas.</p>

<p>An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone. In the column experiment, the phosphorus sorption capacity in BF-slag and BF-slag mixed with burned limestone was observed under saturated and unsaturated flow conditions for 10 weeks. The waste water used in both experiments originated from the full scale testing site at Ångersjön in Sweden. After the column experiment was ended, the filter materials were investigated with XRD (X-ray diffraction) and SEM (scanning electron microscope) in order to figure out which chemical reactions that had taken place.</p><p>The results from the batch experiments show that fine Polonite® and BF-slag mixed with limestone have the fastest P sorption capacity. Already after 5 seconds of shaking the materials showed effective retention of P. The coarse Polonite®, Filtralite® and BF-slag showed similar sorption capacities, although the coarse Polonite® tended to be somewhat inferior. The column studies showed that the materials used in the columns had a sorption capacity of 98 % or more. The XRD and SEM indicated that an amorphous calcium-P-compound was created in the filter material.</p> / <p>I Sverige är reningen av fosfor i vatten från enskilda avlopp ofta bristfällig, vilket bland annat kan leda till övergödning av sjöar, hav och vattendrag. Sedan några år tillbaka har olika filtermaterial med speciella reaktiva egenskaper, som bland annat avskiljer fosfor från avloppsvatten, undersökts. Tanken med filtermaterialen är att de efter mättnad med näringsämnen ska kunnas användas som jordförbättringsmedel. I denna rapport har några olika filtermaterial, lämpade för fosforavskiljning, undersökts genom skak- och kolonnförsök. I skakförsök, där skaktiderna varierade mellan 5 sekunder och 60 minuter, testades Polonite®, Filtralite®, Hyttsand och Hyttsand blandad med 10 % bränd kalk. Polonite® är en upphettad form av bergarten opoka varav två olika kornstorleksfraktioner (0-2 mm och 1-4 mm) användes. Filtralite® och Hyttsand är antropogena filtermaterial. Filtralite® tillverkas i Norge och består av kalkhaltiga kulor av expanderad lera (Leca®). Hyttsand framställs genom vattenkylning av masugnsslagg som bildas vid framställningen av råjärn vid stålverket i Oxelösund. I kolonnförsöken, som utfördes under 10 veckor, studerades Hyttsand och Hyttsand blandad med 10 % bränd kalk under omättade och mättade flödesförhållanden. I samtliga experiment användes avloppsvatten från reningsverket vid Ångersjön, där Filtralite® och Hyttsand testas i fullskala. Efter kolonnförsöken avslutats undersöktes filtermaterialen med XRD (röntgendiffraktion) och SEM (svepelektron mikroskop) för att utreda vilka mekanismer som medverkat vid avskiljningen av fosfor.</p><p>Resultaten från skakförsöken visade att finkornig Polonite® och Hyttsand blandad med kalk avskiljer fosfor effektivt redan efter skakning i 5 sekunder. Grovkornig Polonite, ren Hyttsand och Filtralite® sorberade fosfor tämligen likartat, även om den grovkorniga Poloniten® tenderade att vara aningen sämre än de övriga. Resultaten från kolonnförsöken visade att fosfor kunde avskiljas till över 98 % i alla kolonner och att det bildats amorfa fosfatföreningar, främst med kalcium, under den 2,5 månader långa experimentperioden.</p>

Blast wave induced traumatic brain injury (bTBI) is a modality of injury that has come into prominence at the current time due to the large number of military and civilian personnel who have experienced the localized shock wave produced by explosive devices. The shock wave will travel concentrically outward from the explosive center, being absorbed and transmitted thru soft objects, such as tissue, and reflecting off stationary obstructions. Transmission and absorption in tissues can result in a number of physiological measureable injuries, the most common of which being what is frequently called “blast lung”. Blast lung involves the spalling effect at air-tissue interfaces. Another documented effect involves the asynchronous motion of tissue, particularly in the cranium, as the shock wave passes by. This predominately manifests itself in what is believed to be diffuse axonal injury and initiation of secondary injury mechanism. This study is designed to explore the relationship between shock waves and bTBI. A blast device was constructed for generating a free field shock wave through the high pressure rupture of a polycarbonate membrane. Air pressure in a small chamber is increased to a value several orders of magnitude greater than ambient air pressure and is held in place with the polycarbonate member. At the rupture of this membrane a shock wave is created. Measurements of this blast event, carried out with a piezoelectric pressure transducer, have shown that this shock wave is reproducible for the different membrane materials tested and is symmetrical with respect to the central axis of the high pressure chamber and exit nozzle. Having characterized the shock wave properties in the blast field, a location was chosen at which maximum shock wave pressure could be applied to the cranium for inducing bTBI. Experiments involving blast wave exposure were performed on two separate groups of animals in an attempt at establishing injury. One group was placed at a fixed distance directly below the blast nozzle, thereby experiencing both the shock wave and the associated air blast from the residual air in the chamber, and one placed at a defined distance off-axis to avoid the air blast, yet receiving two sequential blast exposures. All animal studies were approved by the VCU Institutional Animal Care and Use Committee. The degree of injury was then assessed with the use of magnetic resonance imaging (MRI) and spectroscopy (MRS). Image Data was acquired on a 2.4 Tesla magnet for assessing changes in either the total percent water concentration or the apparent diffusion coefficients (ADC) of selected regions of interest in the brain of rats. Localized proton spectroscopic data was acquired from a voxel placed centrally in the brain. The baseline values of these parameters were established before the induction of bTBI. After the blast exposure, the animals were followed up with MRI and MRS at defined intervals over a period of one week. The first group of animals received blast exposure directly underneath the blast device nozzle and the MR data does suggest changes in some of the measureable parameters from baseline following blast exposure. This blast wave data though is confounded with additional and undesirable characteristics of the blast wave. The second group of animals that received a pure shock wave blast exposure revealed no remarkable changes in the MR data pre- to post- blast exposure. The percent water concentration, ADC and spectroscopic parameters were for statistical purposes identical before and after the blast. The resolution of this negative result will require reconsideration of the free field blast exposure concept.

The incidence of mild blast traumatic brain injuryhas risen due tothe increased use of improvised explosive devices (IEDs) in militaryconflicts. Mild blast TBI (mbTBI) is especially relevant due to its lack of acutely observable symptoms, and to its association with long-term neurodegenerative and neuropsychiatric disorders. Predominantly, TBI patients often suffer from chronic stress, neuropathic pain and headaches, which greatly compromise the health and quality of life of these individuals. Treatments for neuropathic pain have been empirically found and produce little effect in lessening neuropathic pain, likely due to the lack of targeted therapies. This highlights the need for better understanding of the molecular mechanisms underlying neuropathicpain, TBI and chronic stress that could lead to mechanistic therapeutic targets. Oxidative stress is an important mechanism of the pathophysiology of neuropathic pain, TBI and chronic stress. We hypothesize that acrolein, an endogenously formed neurotoxin, is able to stay active in the body for up to 10 days, is involved in the pathophysiology of neuropathic pain in TBI and chronic stress. This study aims to correlate acrolein elevation in the body with neuropathic pain, deepen the understanding of underlying mechanisms of pain in TBI and chronic stress, and mitigate this pain with acrolein scavenging. The ultimate goal of this research is to provide therapies for TBI and chronic stress patients that can eliminate pain and significantly improve their healthand quality of life

Os finos de resíduos cimentícios (previamente hidratados) podem ser reciclados através de tratamento térmico, tornando-se um ligante alternativo. Quando tratados termicamente em temperaturas inferiores a 550ºC, o processo não gera emissões de CO2 relativas à descarbonatação do calcário. Esta pesquisa teve como objetivo reativar o cimento Portland de alto forno (CP III) previamente hidratado, desidratando-o em temperatura de 500°C com patamar de 2h e reidratando-o com teores de água e de dispersante variados. Inicialmente foram realizadas caracterizações a fim de comparar as características físico-químicas do cimento desidratado com o cimento anidro. Posteriormente, foram analisadas as transformações de fases observadas com a hidratação, desidratação e reidratação do cimento. A segunda parte do estudo foi de otimização das pastas reidratadas e hidratadas, onde foram definidas condições ideais de dispersão, com a saturação ideal de dispersantes e teores mínimos de água resultado em pastas com volume de poros menores e consequentemente resistências mais elevadas. Os resultados obtidos comprovaram que o cimento desidratado se reidrata e forma fases similares às fases formadas na hidratação, como C-S-H, portlandita, hidrotalcita, etc. O cimento de alto forno carbonata mais do que o cimento Portland (CP V). Devido à área superficial elevada (14 vezes superior ao do cimento anidro), o cimento desidratado libera calor de molhagem elevado, consequencia da recombinação da água com as fases desidratadas. Observou-se ainda que, é possível controlar a resistência à compressão da pasta reidratada, otimizando o volume de poros presentes nas pastas. As resistências das pastas reidratadas com dispersante aos 28 dias foram 2,37 vezes maiores quando comparados com sistemas aglomerados. Com relação a porosidade, há indícios que é possível obter níveis de porosidade para as pastas reidratadas semelhantes com a pasta hidratada. / The fines of cementitious wastes (previously hydrated) can be recycled through heat treatment, becoming an alternative binder. When heat treated at temperatures below 550°C, the process does not generate CO2 emissions relative to limestone decarbonation. The objective of this research was to reactivate the previously hydrated Portland cement (CP III), dehydrating it at a temperature of 500°C with a 2-hours plateau and rehydrating it with varying water and dispersant contents. Characterization was initially performed to compare the physicochemical characteristics of dehydrated cement (DC) with anhydrous cement (AC). Subsequently, the AC-HP phase transformations for DC-RP were analyzed. The second part of the study was the optimization of rehydrated (RP) and hydrated (HP) pastes, where ideal dispersion conditions were defined, with optimum dispersant and water minimum contents, resulting in pastes with smaller pore volumes and consequently more compressive strength high. The results confirm that the DC rehydrates and forms phases similar to the phases formed in the hydration, such as C-S-H, portlandite, hydrotalcite, etc. The blast furnace cement carbonate more than Portland cement (no additions). Due to the high surface area (14 times higher than that of the AC), the DC releases high wetting heat, due to the recombination of the water with the dehydrated phases. It was also observed that it is possible to control the compressive strength of the rehydrated paste by optimizing the pore volume present in the pastes. The strengths of dispersed pastes with additives at 28 days were 2.37 times higher when compared to agglomerated systems. With respect to porosity, there are indications that it is possible to obtain porosity levels for the similar rehydrated pastes with the hydrated paste.

A injeção de carvão pulverizado na região das ventaneiras dos altos-fornos (Pulverized Coal Injection – PCI) é uma tecnologia amplamente praticada em altos-fornos com o objetivo de substituir parte do coque empregado por carvões não-coqueificáveis. O carvão injetado fornece energia e gases redutores para o processo de fabricação do gusa, além de contribuir para a redução da emissão de gases poluentes devido à menor produção de coque. Atualmente todo o carvão injetado em altos-fornos brasileiros é importado. O país possui grandes reservas de carvão, porém este carvão necessita passar por processos de beneficiamento para redução dos teores de matéria mineral e enxofre. A flexibilidade do processo PCI permite a utilização de ampla gama de carvões não-coqueificáveis, o que abre a possibilidade para utilização de carvão brasileiro. Este trabalho teve por objetivo avaliar propriedades de carvão brasileiro beneficiado com teor de cinzas de 18,9% para injeção em altos-fornos. O estudo foi conduzido através de ensaios de combustão empregando um moderno simulador de PCI projetado e desenvolvido pelo Laboratório de Siderurgia da Universidade Federal do Rio Grande do Sul (LaSid) e também uma termobalança de modo a ser possível traçar um comparativo entre ambos os equipamentos. Além do carvão brasileiro, de baixo rank, foram utilizados dois carvões importados já em uso para injeção, um de alto e um de baixo rank. A combustibilidade (ou eficiência de combustão) em simulador de PCI foi avaliada pela conversão (burnout), calculada pelo método ash tracer, um balanço de massa entre a quantidade de cinzas que entra e sai do reator. Em termobalança o parâmetro adotado foi a temperatura de pico, correspondente à taxa máxima de reação. Fez-se também a avaliação da reatividade ao CO2 dos chars gerados em simulador de PCI, visto que o char ao deixar a zona de combustão passa por uma zona rica neste gás. Análise estatística revelou que a técnica adotada de burnout mostrou-se bastante eficiente para diferenciar carvões de teores de matéria volátil distintos, porém não no caso de carvões com teores de matéria volátil similares. No simulador de PCI a influência da matéria volátil do carvão foi mais pronunciada do que o rank e em termobalança o rank teve mais efeito sobre a combustibilidade do que a matéria volátil. O carvão brasileiro apresentou propriedades comparáveis às do carvão importado de baixo rank utilizado para PCI. Isto representa uma grande vantagem, visto que possibilitaria a utilização do mesmo na siderurgia. / Pulverized coal injection through blast furnace tuyeres (PCI) is a widely practiced technology in blast furnaces to replace part of coke by non-coking coal. Injected coal provides energy and reducing gases for pig iron production process, as well as contributes to reducing pollutants gases emission due to coke saving. Currently all coal injected into Brazilian blast furnaces is imported. The country has large reserves of coal, but this coal needs to undergo beneficiation to reduce mineral matter and sulfur contents. PCI process flexibility allows the employment of a wide range of non-coking coals, which opens the possibility to use Brazilian coal. This work aimed to evaluate properties of Brazilian coal benefited with 18.9% ash content for injection into blast furnaces. The study was conducted through combustion tests employing a modern PCI test rig designed and developed by the Iron and Steelmaking Laboratory (LaSid) of the Federal University of Rio Grande do Sul (UFRGS) and also a thermobalance in order to draw a comparison between both equipments. In addition to low rank Brazilian coal, two imported coals which are already used for injection were used, one high and one low rank. The combustibility (or combustion efficiency) in a PCI test rig was evaluated by burnout, calculated by the ash tracer method, a mass balance between the amount of ash that enters and leaves the reactor. Peak temperature was the parameter adopted to evaluate combustibility in thermobalance, corresponding to the maximum rate of reaction. It was also evaluated the CO2 reactivity of chars generated in the PCI test rig, since char leaving the combustion zone passes through a CO2 rich area. Statistical analysis revealed that burnout technique proved to be efficient enough to differentiate coals with different volatile matter contents, but not in the case of coals with similar volatile matter contents. In PCI test rig the influence of volatile matter was more pronunced than rank and in thermobalance rank had more effect on combustibility than volatile matter. Brazilian coal showed properties comparable to the ones of imported low rank coal already in use for PCI. This is a great advantage, since it would make it possible to use it in ironmaking.