This thesis focuses on the implementation of species-specific isotope dilution (SSID) methodology and stable isotope tracers to determine mercury species occurrence and transformation processes in-situ and during sample treatment. Isotope enriched tracers of methyl-, ethyl- and inorganic mercury were synthesised and applied in different combinations to marine and biological samples. Experimental results were obtained using gas chromatography-inductively coupled plasma-mass spectrometry (GC-ICP-MS). Mercury methylation and methylmercury demethylation processes in surface sediments were studied in the brackish Öre River estuary, Bothnian Bay. Uni- and multivariate data evaluation identified the organic material content and mercury methylation potential in the sediments as important factors controlling incipient methylmercury levels. Mercury species distribution in mice treated with the pharmaceutical preservative Thimerosal (ethylmercurithiosalicylate) was studied. The ethylmercury moiety of Thimerosal was observed to rapidly convert to inorganic mercury in the mice during the treatment period as well as during sample treatment, hence necessitating SSID methodology for accurate ethylmercury determinations in biological samples. To facilitate the introduction of SSID as a routine quantitative method in mercury speciation, a methylmercury isotopic certified reference material (ICRM) was produced. Prior to certification, the stability of the material was examined in conventional and isochronous stability studies spanning 12 months, which permitted uncertainty estimation of the methylmercury amount content for two years of shelf-life. Finally, a field-adapted SSID method for methylmercury determinations in natural water samples was developed. The proposed analytical protocol significantly simplified sample storage- and treatment procedures without sacrifices in analytical accuracy.

The main goal of the work presented in this thesis is to improve the reliability of existing methods for speciation analysis of organotin compounds Species-specific isotope dilution (SSID) calibration in combination with gas chromatography – inductively coupled plasma mass spectrometry was used to investigate the transformation of phenyltin species during sample preparation. Isotope-enriched phenyltin species were synthesized from corresponding isotope-enriched tin metals. SSID with a mixture of phenyltin species (PhTs) from one isotope was used to evaluate different extraction procedures for the determination of PhTs in fresh water sediment. Preparative liquid chromatography was used to produce single isotope-enriched phenyltin species making a multi-isotope spike (MI) SSID calibration possible. Different extraction procedures for the analysis of phenyltin species in biological samples were evaluated by applying MI-SSID. Degradation of TPhT and DPhT during sample extraction was observed and quantified. Accurate results were therefore obtained. A sample preparation procedure using mild extraction conditions with reasonable recoveries is described. The stability of organotin standards was investigated under different storage conditions. Mono- and diphenyltin were found to be redistributed and degraded during storage in methanol but were stabilized in sodium acetate/ acetic acid. A fast redistribution between monobutyl- and diphenyl tin has been observed and therefore it is therefore recommended that standards be derivatized as soon as possible after butyl- and phenyltin standards are mixed. Included in the thesis is also an investigation of the analytical potential of using instrumentation based on atomic absorption spectrometry (AAS) for speciation analysis of organotin compounds. The method was based on gas chromatographic separation, atomization in a quartz tube and detection by line source (LS) AAS and for comparison, by state of the art continuum source (CS) AAS. Analytical performances of CSAAS system were found to be better compared to LSAAS.

Nutrient dynamics in a lodgepole pine forest at Bootleg Mountain, B.C., were investigated through the sampling of soil, snow and groundwater in six one-ha blocks. Nitrogen (NO3-, NH4+, TIN, TDN, TN), phosphorus (PO43-, TDP, TP), and DOC were analyzed in addition to N mineralization and nitrification. Position and dispersion statistics were computed for each variable and correlations (Pearson and Spearman) were computed for each pair of variables. The overall heterogeneities of soil, snow, and groundwater were generally lower between 1-ha blocks than between plots. Productivity in the soil was generally N-limited with low input from snow precipitation. Very little N leached from soil to groundwater. Phosphorus contents were highly variable and were the limiting nutrient in the groundwater. Rates of net and gross N mineralization and nitrification were determined using buried bags and 15N isotope dilutions. Gross rates were greater than net rates and nitrification was low relative to high immobilization rates. The N cycle appears to be tightly regulated, thus further study will be needed to monitor the impact of harvesting on N cycling.

Nutrient dynamics in a lodgepole pine forest at Bootleg Mountain, B.C., were investigated through the sampling of soil, snow and groundwater in six one-ha blocks. Nitrogen (NO3-, NH4+, TIN, TDN, TN), phosphorus (PO43-, TDP, TP), and DOC were analyzed in addition to N mineralization and nitrification. Position and dispersion statistics were computed for each variable and correlations (Pearson and Spearman) were computed for each pair of variables. The overall heterogeneities of soil, snow, and groundwater were generally lower between 1-ha blocks than between plots. Productivity in the soil was generally N-limited with low input from snow precipitation. Very little N leached from soil to groundwater. Phosphorus contents were highly variable and were the limiting nutrient in the groundwater. Rates of net and gross N mineralization and nitrification were determined using buried bags and 15N isotope dilutions. Gross rates were greater than net rates and nitrification was low relative to high immobilization rates. The N cycle appears to be tightly regulated, thus further study will be needed to monitor the impact of harvesting on N cycling.

Made available in DSpace on 2014-10-09T12:37:32Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:03:17Z (GMT). No. of bitstreams: 1 05174.pdf: 4868507 bytes, checksum: ef4d7e8312562d1a1e608bf1fd65e9ec (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares, Sao Paulo

Made available in DSpace on 2014-10-09T12:37:32Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:03:17Z (GMT). No. of bitstreams: 1 05174.pdf: 4868507 bytes, checksum: ef4d7e8312562d1a1e608bf1fd65e9ec (MD5) / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares, Sao Paulo

In dieser Arbeit wurde ein Verfahren zur rückführbaren Proteinquantifizierung unter Verwendung von Schwefelisotopenverdünnung mit induktiv gekoppelter Plasmamassenspektrometrie (ID-ICP-MS) entwickelt. Die Methode dient zur zuverlässigen Quantifizierung laborinterner Proteinstandards. Sie eignet sich nur zur Analyse reiner Proteine, deren Stöchiometrie bekannt ist, da die Proteinkonzentration aus dem Schwefelgehalt bestimmt wird. Nicht proteingebundener Schwefel wird durch Membranfiltration von der Proteinfraktion abgetrennt und mit ID-ICP-MS quantifiziert. Der Gesamtschwefelgehalt in der Probe wird ebenfalls mittels ID-ICP-MS quantifiziert und um die Menge an ungebundenem Schwefel korrigiert. Die Optimierung der Probenvorbereitung zeigte, dass ein Aufschluss die Unsicherheit des Ergebnisses verbessert. Für die Methodenentwicklung wurden ein zertifiziertes Rinderserumalbumin-Referenzmaterial (BSA), sowie ein kommerzielles Avidin verwendet. Die Bestimmung der Proteinmassenfraktionen und Unsicherheitsbudgets erfolgte nach Korrektur für den ungebundenen Schwefel (0,4 % für BSA, 30 % für Avidin). Die Methode wurde auf das Tau-Protein angewendet, das ein Biomarker für die sogenannten „Tauopathien“ ist – eine Gruppe neurodegenerativer Krankheiten, die die Alzheimer-Krankheit und die frontotemporale Demenz einschließen. Durch Verwendung eines isotopenangereicherten Spikes, der an das SI-System angebunden ist, wurde die metrologische Rückführbarkeit für den Massenanteil des Tau-Proteins erreicht. Dieser Tau-Standard wurde zur absoluten Quantifizierung toxischer transgener Tau-Spezies in der löslichen Hirnfraktion transgener Mäuse verwendet. Die entwickelte Methode ist für die rückführbare Quantifizierung von Proteinen zur Verwendung als Standards in der biologischen und medizinischen Forschung anwendbar. Sie zeigte eine ähnliche Präzision wie etablierte Verfahren, erforderte jedoch weniger Probenvorbereitung und keine spezies-spezifischen Standards. / In this work, a method for traceable protein quantification using sulphur isotope dilution inductively coupled plasma mass spectrometry (ID-ICP-MS) was developed. The method is intended for the reliable quantification of in-house protein standards. It is only suited for pure protein formulations for proteins of known stoichiometry because the protein concentration is determined from the sulphur content. Non-protein bound sulphur is separated from the protein fraction by membrane filtration and is quantified by ID-ICP-MS. The total sulphur content in the sample is as well quantified by ID-ICP-MS and corrected for the amount of non-protein bound sulphur. Optimisation of the sample preparation showed that digestion improves the uncertainty of the result. For method development, a certified reference material bovine serum albumin (BSA) and a commercial avidin were used. The protein mass fractions with full uncertainty budgets were determined after correction for unbound sulphur. The developed procedure was applied to the tau protein, which is a biomarker fort he so-called „tauopathies“ – a group of neurodegenerative diseases including Alzheimer’s disease and Frontotemporal dementia. By employing an isotopically enriched spike, which is linked to the SI system, full metrological traceability was achieved for the tau mass fraction. The mass fraction of (0.328 ± 0.036) g kg-1 for tau was determined by ID-ICP-MS and confirmed by amino acid analysis. This tau standard was used for the absolute quantification of toxic transgenic tau species in the soluble brain fraction of transgenic mice. The developed method is applicable for the traceable quantification of proteins for use as standards in biological and medical research. The precision of the method was similar to established absolute protein quantification procedures while requiring less sample preparation and no species-specific standards.

Abstract Mercury is a global pollutant that accumulates easily in forest soils, even in remote areas. Mercury accumulated in soils can be subsequently released into surface waters causing an increased eco-toxicological and human health risk. The most toxic form of mercury to humans and wildlife is methyl mercury (MeHg), which can be formed in the environment via methylation processes. In freshwaters, MeHg is readily accumulated in fish, which are the main source of human exposure to MeHg. The determination of both total mercury and MeHg concentrations in environmental samples, such as natural waters and soils, is important in environmental risk assessment. This study involved the development of analytical methods for the determination of ultra-trace total mercury and MeHg concentrations in humic-rich natural water and peat soil samples. Each developed method was carefully optimized and validated by using real natural water and peat soil samples, certified reference materials and/or reference methods. The cold vapor inductively coupled plasma mass spectrometry (CV-ICP-MS) method developed during this study was found to be a reliable method for the determination of total ultra-trace mercury concentrations in natural freshwaters. Purge and trap gas chromatography, coupled to an ICP-MS, was used in mercury speciation analysis. Together with species-specific isotope dilution this technique proved to be a reliable method in MeHg determinations. Prior to instrumental determination, MeHg was successfully isolated from humic-rich water and peat soil samples using N2-assisted distillation. The analytical methods developed in this study were successfully applied to an investigation of the effects of forest harvesting practices on the mobilization of mercury in boreal forest catchments. / Tiivistelmä Elohopeaa pääsee ilmakehään sekä luonnollisista lähteistä (mm. tulivuorenpurkaukset ja kiviaineksen rapautuminen), että ihmisen toiminnan kautta. Elohopean viipymäaika ilmakehässä on hyvin pitkä, minkä vuoksi se voi kulkeutua kauas päästölähteestä ennen päätymistään maaperään ja vesistöihin. Ympäristössä olevasta epäorgaanisesta elohopeasta voi muodostua erittäin myrkyllistä metyylielohopeaa, joka rikastuu helposti ravintoketjussa. Metyylielohopean muodostuminen on merkittävä osa elohopean biogeokemiallista kiertoa, minkä vuoksi metyylielohopean määrittäminen näytteen kokonaiselohopeapitoisuuden ohella antaa tärkeää tietoa elohopean käyttäytymisestä ympäristössä. Tutkimuksessa kehitettiin analyysimenetelmät, joilla määritettiin ultrapieniä kokonaiselohopea- ja metyylielohopeapitoisuuksia humuspitoisista luonnonvesistä ja turvemaanäytteistä. Tutkimuksessa käytetyt näytteet oli kerätty turvemaametsien valuma-alueilta Sotkamosta. Luonnonvesinäytteiden kokonaiselohopeapitoisuuksien määrityksessä käytettiin kylmähöyrymenetelmää (CV) yhdistettynä induktiiviplasma-massaspektrometriaan (ICP-MS). Vesi- ja turvenäytteiden metyylielohopeapitoisuuksien määrityksessä elohopeaspesiekset erotettiin kaasukromatografisesti (GC) ja määritettiin isotooppilaimennus-ICP-MS:lla. Ennen GC-ICP-MS -määritystä näytteet esikäsiteltiin typpiavusteisella tislausmenetelmällä ja esikonsentroitiin ’purge and trap’ -tekniikalla. CV-ICP-MS ja ’purge and trap’ GC-ICP-MS -menetelmät optimoitiin huolellisesti sekä laiteparametrien, että reagenssimäärien suhteen. Menetelmillä saatavien tulosten oikeellisuus varmistettiin vertailumateriaalien ja/tai vertailumenetelmien avulla. Kehitettyjä analyysimenetelmiä hyödynnettiin tutkimuksessa, jossa seurattiin metsähakkuiden mahdollisia vaikutuksia elohopean huuhtoutumiseen ja metyloitumiseen ojitetuilla turvemailla.

Bei der Schwefelquantifizierung in Kupfer und anderen reinen Metallen zeigte sich in der Vergangenheit eine mangelnde SI-Rückführung und zusätzlich inkonsistente Ergebnisse, wenn verschiedene Methoden verglichen wurden. Um diesen Mangel zu beheben ist ein Referenzverfahren erforderlich, welches SI-rückführbare Werte mit einem zuverlässigen Unsicherheitsbudget ermöglicht. In dieser Studie wurde ein entsprechendes Referenzverfahren zur Quantifizierung von Gesamtschwefel in Kupfer basierend auf der induktiv gekoppelten Plasma-Massenspektrometrie und der Isotopenverdünnungsanalyse (ICP-IDMS) entwickelt. Um diese Probleme zu lösen wurde mit Hilfe der Ionenaustauschchromatographie ein Schwefel-Matrix-Trennverfahren entwickelt. Dieses Trennverfahren wurde mit ICP-IDMS kombiniert, um Schwierigkeiten mit der Kalibrierung zu lösen und fehlende metrologische Konzepte einzuführen. So wurden die in diesem Projekt erzielten IDMS-Messwerte für die Kalibrierung von GDMS und LA-ICP-MS verwendet, beides Verfahren die im industriellen Einsatz üblich sind. Dadurch konnten mit beiden Routineverfahren zuverlässige Ergebnisse erzeilt warden, die zudem auf SI rückführbar sind. Darüber hinaus wurde ein auf der LA-ICP-IDMS basierendes Verfahren entwickelt, um den Probenvorbereitungsschritt von ICP-IDMS mit Schwefel-Matrix-Trennung zu reduzieren. Die Vorteile dieser Methode sind ein geringerer Arbeits- und Zeitaufwand, die SI- Rückführung der Messergebnisse und eine für LA-ICP-MS vergleichsweise hohe Genauigkeit. Die Schlüsselrolle hierbei spielte der innovative Einsatz von Polyethylenfritten als Trägermaterial der aufgelösten Probe. Dadurch war die Quantifizierung von Schwefel in Kupferproben mittels LA-ICP-IDMS möglich. Die wesentlichen Parameter wie Absorptionseffizienz der Fritten und Matrixeffekt wurden untersucht. Das entwickelte Verfahren konnte mit Hilfe der ICP-IDMS vollständig validiert werden. / Sulphur quantification in copper and other pure metals in the past revealed a lack of SI-traceability and also showed inconsistent results, when different methods are compared. Therefore, a reference procedure is required to enable SI-traceable measurement results accompanied by a sound uncertainty budget. In this study, such a procedure was developed for the quantification of total sulphur in copper using inductively coupled plasma-isotope dilution mass spectrometry (ICP-IDMS). For solving these problems ion exchange chromatography was applied, and a sulphur-matrix separation procedure was developed. This procedure was combined with ICP-IDMS to solve difficulties with the calibration and to realize metrological concepts. An application of the IDMS procedure was realized by using the measurement results of specific copper samples values for calibrating glow discharge mass spectrometry (GDMS) and laser ablation ICP-MS (LA-ICP-MS). Both techniques are considered routine techniques. Thus, they could provide reliable results which are traceable to the SI. Additionally, a procedure based on LA-ICP-IDMS was developed to significantly reduce the sample preparation step of ICP-IDMS with sulphur-matrix separation. This procedure is less laborious and the measurement results are still SI traceable and offer a comparatively high accuracy for LA-ICP-MS. Key for this development was the innovative application of polyethylene frits as support material for the dissolved sample. Thus, the quantification of sulphur in copper samples by LA-ICP-IDMS could be realized. The essential parameters are investigated such as the absorption efficiency of the frit and matrix effects. The developed procedure was fully validated by means of the ICP-IDMS results.