Global ETD Search

271	Microstructural and Micro-Mechanical Characterization of As-built and Heat-treated samples of HASTELLOY X produced by Laser Powder Bed Fusion Process Sanni, Onimisi January 2022 (has links) Microstructure and micro-mechanical characterization of as-built and heat-treated samples of Hastelloy X produced by laser powder bed fusion (LPBF) process has been carried out in this study. As-built LPBF blocks were solution heat-treated at 1177°C and 1220°C followed by fast cooling. The microstructure of as-built and heat-treated samples were studied by light optical microscopy, scanning electron microscopy, and electron backscatter diffraction. Instrumented indentation micro Vickers testing was performed to obtain microhardness and elastic modulus of asbuilt and heat-treated samples. Microtensile samples from as-built and heat-treated blocks were prepared and polished for mechanical characterization. Microtensile testing inside the scanning electron microscope was performed to evaluate the mechanical properties and to get information about the microstructural changes during plastic deformation. Microstructure characterization revealed disrupted epitaxial grain growth for the as-built samples whereas the two heated-treated Hastelloy X samples exhibited equiaxed grains with varying twin fractions. As-built Hastelloy X samples exhibited higher mean hardness than heat-treated samples. The yield strength of as-built samples reveals higher values as compared to conventional wrought Hastelloy X samples, whereas lower yield strength and higher elongation were observed for heat-treated samples as compared to as-built samples. Higher elongation and lower yield strength values were observed for the samples solution heat-treated at 1220°C compared to the solution heat-treated at 1177°C. Microstructural evaluation at different plastic strains during in-situ microtensile testing reveals a clear difference in dislocation density for as-built and heat-treated samples. As-built Hastelloy X blocks Laser powder bed fusion (LPBF) Solution heat-treatment Disrupted epitaxial growth Melt Pool Boundaries (MPB) Grain Boundaries (GB) Precipitates In-situ microtensile testing microhardness Mechanical properties Twin grain boundary fractions Bearbetnings-, yt- och fogningsteknik Metallurgy and Metallic Materials Metallurgi och metalliska material
272	Strengthening Mechanisms in Microtruss Metals Ng, Evelyn 18 December 2012 (has links) Microtrusses are hybrid materials composed of a three-dimensional array of struts capable of efficiently transmitting an externally applied load. The strut connectivity of microtrusses enables them to behave in a stretch-dominated fashion, allowing higher specific strength and stiffness values to be reached than conventional metal foams. While much attention has been given to the optimization of microtruss architectures, little attention has been given to the strengthening mechanisms inside the materials that make up this architecture. This thesis examines strengthening mechanisms in aluminum alloy and copper alloy microtruss systems with and without a reinforcing structural coating. C11000 microtrusses were stretch-bend fabricated for the first time; varying internal truss angles were selected in order to study the accumulating effects of plastic deformation and it was found that the mechanical performance was significantly enhanced in the presence of work hardening with the peak strength increasing by a factor of three. The C11000 microtrusses could also be significantly reinforced with sleeves of electrodeposited nanocrystalline Ni-53wt%Fe. It was found that the strength increase from work hardening and electrodeposition were additive over the range of structures considered. The AA2024 system allowed the contribution of work hardening, precipitation hardening, and hard anodizing to be considered as interacting strengthening mechanisms. Because of the lower formability of AA2024 compared to C11000, several different perforation geometries in the starting sheet were considered in order to more effectively distribute the plastic strain during stretch-bend fabrication. A T8 condition was selected over a T6 condition because it was shown that the plastic deformation induced during the final step was sufficient to enhance precipitation kinetics allowing higher strengths to be reached, while at the same time eliminating one annealing treatment. When hard anodizing treatments were conducted on O-temper and T8 temper AA2024 truss cores, the strength increase was different for different architectures, but was nearly the same for the two parent material tempers. Finally, the question of how much microtruss strengthening can be obtained for a given amount of parent metal strengthening was addressed by examining the interaction of material and geometric parameters in a model system. microtruss strengthening copper C11000 aluminum AA2024 cellular metal mechanical properties compressive strength densification energy modulus work hardening precipitation hardening heat treatment nanocrystalline coating aluminum oxide coating coating anodizing electrodeposition strengthening mechanisms geometry pyramidal compression buckling architecture truss uniaxial compression perforation Ramberg-Osgood Holloman nickel-iron annealing relative density periodic cellular hybrid composite microhardness stretch bend peak strength scanning electron microscopy stress strain bending stretching failure yielding column critical buckling strength critical buckling stress yield strength forming 0794
273	Strengthening Mechanisms in Microtruss Metals Ng, Evelyn 18 December 2012 (has links) Microtrusses are hybrid materials composed of a three-dimensional array of struts capable of efficiently transmitting an externally applied load. The strut connectivity of microtrusses enables them to behave in a stretch-dominated fashion, allowing higher specific strength and stiffness values to be reached than conventional metal foams. While much attention has been given to the optimization of microtruss architectures, little attention has been given to the strengthening mechanisms inside the materials that make up this architecture. This thesis examines strengthening mechanisms in aluminum alloy and copper alloy microtruss systems with and without a reinforcing structural coating. C11000 microtrusses were stretch-bend fabricated for the first time; varying internal truss angles were selected in order to study the accumulating effects of plastic deformation and it was found that the mechanical performance was significantly enhanced in the presence of work hardening with the peak strength increasing by a factor of three. The C11000 microtrusses could also be significantly reinforced with sleeves of electrodeposited nanocrystalline Ni-53wt%Fe. It was found that the strength increase from work hardening and electrodeposition were additive over the range of structures considered. The AA2024 system allowed the contribution of work hardening, precipitation hardening, and hard anodizing to be considered as interacting strengthening mechanisms. Because of the lower formability of AA2024 compared to C11000, several different perforation geometries in the starting sheet were considered in order to more effectively distribute the plastic strain during stretch-bend fabrication. A T8 condition was selected over a T6 condition because it was shown that the plastic deformation induced during the final step was sufficient to enhance precipitation kinetics allowing higher strengths to be reached, while at the same time eliminating one annealing treatment. When hard anodizing treatments were conducted on O-temper and T8 temper AA2024 truss cores, the strength increase was different for different architectures, but was nearly the same for the two parent material tempers. Finally, the question of how much microtruss strengthening can be obtained for a given amount of parent metal strengthening was addressed by examining the interaction of material and geometric parameters in a model system. microtruss strengthening copper C11000 aluminum AA2024 cellular metal mechanical properties compressive strength densification energy modulus work hardening precipitation hardening heat treatment nanocrystalline coating aluminum oxide coating coating anodizing electrodeposition strengthening mechanisms geometry pyramidal compression buckling architecture truss uniaxial compression perforation Ramberg-Osgood Holloman nickel-iron annealing relative density periodic cellular hybrid composite microhardness stretch bend peak strength scanning electron microscopy stress strain bending stretching failure yielding column critical buckling strength critical buckling stress yield strength forming 0794

Page generated in 0.0407 seconds