People around the globe are immensely trying to connect using light as carrier due to its low power consumption and high data transfer rates. Sound and microwaves are examples of other carriers that can be used, although they aren't nearly as efficient as light. A method of communicating is using light beneath the surface of the water. As the depth of the water increases, the temperature, pressure, and salinity of the water are changed. The refractive index of water is determined by the combination of all of these variable parameters. The goal of this thesis is to establish a relationship between changes in water temperature, salinity, and pressure resulting in changes of the refractive Index of the sea water. This thesis will demonstrate an empirical model of travelling the ultraviolet wave under sea water. We are acknowledging all of the properties that are change as the depth of the water is increasing. MATLAB was used to create a simulation of this scenario. Based on previous model of light traveling which covers the wavelengths between 400-700 nm, we have extended the model to ultraviolet range of light (200-400 nm).We design an experimental set up according to sea water parameters and then the experimental results are compared to the simulation results. The comparison shows the validity of our extension model.

This diploma thesis is focused on design and prototyping of wireless optical link for an indoor usage. In the beginning of the thesis frequency spectrums of infrared, visible and ultraviolet light are described by its typical qualities such as values of attenuation or reflection capability. On the basis of this analysis, a proper wavelength has been chosen for usage at the engineered communication system. Next part is devoted to selection of suitable communication components on basis of its declared qualities. In the following chapter this qualities are in carefully measured and after that they are compared with values provided by its manufacturer. The following section is devoted to design schemes of transceiver modules. After completion of the design the manufacturing of PCB, mounting components and the analysis of their distribution was described. The last part of this thesis deals with testing of created prototype in terms of maximum transmission distances and operating frequencies. At the very end of this project, in one small section ways to improve system characteristics was discussed.

Die Quantenschlüsselverteilung (QKD), die erste anwendbare Quantentechnologie, verspricht informationstheoretisch sichere Kommunikation. In der vorliegenden Arbeit wurde das Zeit-Frequenz (TF)-QKD-Protokoll untersucht, das Zeit und Frequenz, nämlich Puls-Positionsmodulation (PPM) im Zeitbereich und Frequenzumtastung (FSK) im Frequenzbereich als die beiden komplementären Basen verwendet. Seine Sicherheit beruht den Quanteneigenschaften von Licht und auf der Zeit-Frequenz-Unschärferelation. TF-QKD kann mit größtenteils Standard-Telekommunikationstechnologie im 1550-nm-Band implementiert werden. Die PPM-Basis kann mit Modulatoren und die FSK-Basis mit Hilfe der Wellenlängenmultiplex-Technologie realisiert werden. Das TF-QKD-Protokoll ist in der Lage, ein beliebig großes Alphabet bereitzustellen, was mehr als 1 bit/Photon ermöglicht. Darüber hinaus ist es robust gegenüber athmosphärischen Störungen und somit für die Übertragung über den Freiraumkanal geeignet. In der vorliegenden Arbeit wird das TF-QKD-Protokoll theoretisch bewertet, mit Standardkomponenten für 1 bit/Photon implementiert und die Freiraumübertragung mit optischem Tracking über eine 388 m Teststrecke wird bei Tageslicht demonstriert. Unter Verwendung der vorhandenen Komponenten konnte eine sichere Schlüsselrate von 364 kbit/s back-to-back und 9 kbit/s über den Freiraumkanal demonstriert werden. / Quantum key distribution (QKD), the first applicable quantum technology, promises information theoretically secure communication. In the presented work the time-frequency (TF)-QKD protocol was examined, which uses time and frequency, namely pulse position modulation (PPM) in the time domain and frequency shift keying (FSK) in the frequency domain as the two complementary bases. Its security relies on the quantum properties of light and the time-frequency uncertainty relation. TF-QKD can be implemented mostly with standard telecom-technology in the 1550 nm band. The PPM basis can be implemented with modulators and the FSK basis with help of wavelength-division multiplexing technology. The TF-QKD protocol is capable of providing an arbitrarily large alphabet enabling more than 1 bit/photon. Moreover, it is robust in the atmosphere making it suitable for transmission over the free-space channel. In the present work the TF-QKD protocol is assessed theoretically, implemented with off-the-shelf components for 1 bit/photon and free-space transmission with optical tracking over a 388 m testbed is demonstrated in daylight. Using components at hand, secret key rates of 364 kbit/s back-to-back and 9 kbit/s over the free-space channel could be demonstrated.

With the explosion of the number of compute nodes, the bottleneck of future computing systems lies in the network architecture connecting the nodes. Addressing the bottleneck requires replacing current backplane-based network topologies. We propose to revolutionize computing electronics by realizing embedded optical waveguides for onboard networking and wireless chip-to-chip links at 200-GHz carrier frequency connecting neighboring boards in a rack. The control of novel rate-adaptive optical and mm-wave transceivers needs tight interlinking with the system software for runtime resource management.

<p>This thesis presents the methods to extract modal parameters of semiconductor laser diodes based on a general zero-dimensional rate equation model. Three experiments, namely: the steady-state power versus injection current, small signal intensity modulation response and measurement of small signal response through dispersive optical fiber have been introduced, performed and analyzed under a sample space of 20 Multiple Quantum Well (MQW) Distributed feedback (DFB) laser of the same specification and from the same manufacturer. Testing software has been developed to perform the experiments , collect and analyze the data. The test results display an interesting Gaussian distributions that can be used to enhance further extraction process.</p> <p>An new method to extract the line-width enhancement factor has been purposed, which introduce a new way to extract rate equation parameters for laser lasing at the wave length for zero dispersion in optical fiber (1310nm). The new method circumvent the difficulty for measurement of small signal response through dispersive optical fiber method will not work due to the low fiber dispersion around this wavelength. This method has been validated and published at OSA conference.</p> / Master of Applied Science (MASc)

<h2 id="x-x-x-bp_categories-h"> </h2> / <p>The discrete-time Poisson (DTP) channel models a wide range of optical communication channels. The channel capacity and capacity-achieving distributions are generally unknown. This thesis addresses system design of DTP channels and presents novel contributions to the capacity of DTP channel, properties and closed-form expression of the capacity-achieving distribution under peak and average constraints, signalling design, and sum-capacity-achieving distributions of DTP multiple access channel (MAC) with peak amplitude constraints.</p> <p>Two algorithms are developed to compute the channel capacity of DTP channel as well as the capacity-achieving distribution with average and peak amplitude constraints. Tight lower bounds based on input distributions with simple forms are presented. Non-uniform signalling algorithms to achieve the channel capacity are also demonstrated. Fundamental properties of capacity-achieving distributions for DTP channels are established. Furthermore, necessary and sufficient conditions on the optimality of binary distributions are presented. Analytical expressions for the capacity-achieving distributions of the DTP channel are derived when there is no dark current and when the dark current is large enough. A two-user DTP multiple access channel model is proposed and it is shown that the sum-capacity-achieving distributions under peak amplitude constraints are discrete with a finite number of mass points.</p> / Doctor of Philosophy (PhD)

Este trabalho faz uma extensa e detalhada análise de sistemas ópticos coerentes baseados na tecnologia de acesso múltiplo por divisão de código, com ênfase naqueles em que o processo de codificação do sinal óptico é realizado por meio de deslocamentos de fase no domínio espectral (SPECTS-OCDMA). Apesar de ser um estudo numérico, esforços são concentrados na tentativa de aproximar estes cenários simulados aos cenários mais realistas, implementados em laboratórios. Nesse contexto, levando em consideração o impacto dos efeitos dispersivos e nãolineares da fibra óptica em sistemas SPECTS-OCDMA, são modelados diversos dispositivos que constituem o sistema de recepção do sinal óptico (nonlinear optical loop mirror e nonlinear thresholder), e mostradas suas influências no desempenho do sistema. Isso permite identificar o exato grau de interferência que cada código de uma determinada família de códigos causa nos outros códigos da mesma família. Esta análise é diferente de tudo previamente reportado para os sistemas OCDMA, porque até então sempre se supôs que todos os códigos de uma mesma família têm o mesmo desempenho. Também é demonstrado que uma escolha ótima do conjunto de códigos reduz consideravelmente a taxa de erro de bit (BER). Os conjuntos ótimos de códigos são obtidos em termos do padrão de interferência causado por todos os códigos no usuário de interesse. Isso permite mostrar que o uso de conjuntos ótimos de códigos não só melhora o desempenho geral do sistema em termos de BER, mas também elimina a quebra de ortogonalidade (nunca levada em consideração em análises anteriores de sistemas OCDMA) devido à diafonia (crosstalk). Este aspecto também é resolvido com detalhes neste trabalho uma vez que ele compromete seriamente a segurança do sistema contra espiões (intencionais e não intencionais). Ainda visando a modelagem de dispositivos voltados para sistemas ópticos coerentes, também foi investigado neste trabalho a evolução de pulsos ultracurtos e de alta potência (com fase modulada no domínio espectral) em fibras altamente não-lineares. Esse fenômeno conhecido por geração de luz supercontínua é caracterizado por um forte alargamento espectral induzido por efeitos não-lineares no meio óptico, e que encontra uma grande variedade de aplicações, como tomografia por coerência óptica, espectroscopia e metrologia de frequência. Entretanto, o ajuste do espectro obtido após a propagação para uma dessas aplicações requer uma escolha correta da fibra óptica e da fonte de pulsos ultracurtos utilizados. Uma vez que esses parâmetros estão definidos, fica muito difícil conseguir um ajuste fino do espectro obtido. Dessa forma, a vantagem da utilização de pulsos modulados é a possibilidade de se realizar uma sintonia fina do espectro obtido para uma aplicação desejada. Além disso, essa técnica permite a geração de pentes de frequências ópticos (optical frequency combs) sintonizáveis. / In this work we perform a comprehensive analysis of a spectral phase-encoded time spreading optical code division multiple access (SPECTS-OCDMA) system. Despite being a numerical study, efforts were concentrated on the investigation of more realistic scenarios using as much information as possible from implemented test-beds in laboratories. In this context, after take into account the impact of dispersive and nonlinear effects of optical fiber in SPECTS-OCDMA systems, some devices of the optical signal reception subsystem are modeled (nonlinear optical loop mirror and nonlinear thresholder), and their influences on system performance are shown. This allowed for the first time in the OCDMA literature the identification of the exact degree of interference that each code of a particular family of codes causes on other codes of the same family. This analysis considerably advances the common sense adopted in the literature in which all codes of the same family perform equally. It is demonstrated that an adequate (optimal) choice of codes can reduce considerably the bit error rate (BER). The optimal code-sets are obtained in terms of the interference pattern caused by every code on the code of interest. Furthermore, it is shown that the use of optimal code-sets not only improves the overall system performance in terms of BER, but also eliminates the orthogonality failure (never accounted for in previous OCDMA analysis) due to crosstalk. This issue is also addressed in details in this work since it seriously compromises the security of the system against (intentional or unintentional) eavesdroppers. Still aiming at modeling devices for coherent optical systems, it is investigated the evolution of ultrashort high-power pulses (spectrally phase modulated) in high nonlinear fibers. This phenomenon known as supercontinuum generation is characterized by strong spectral broadening induced by nonlinear effects in optical medium, and finds a wide range of applications such as optical coherence tomography, spectroscopy and frequency metrology. However, tailoring the supercontinuum (SC) spectra to a specific application requires the correct choice of the optical fiber and the ultrashort pulse source. Once these parameters are defined, it becomes very difficult to achieve a fine tune of the generated spectra. Therefore, an alternative is to phase modulate the input pulse to adjust the generated spectra to a specific application. Also, we show that this technique allow us to generate tunable optical frequency combs simply by adjusting the modulation parameters.

Esta dissertação de mestrado investiga os formatos de modulação óptica alternativos ao tradicional formato binário de intensidade (NRZ - Non-return-to-zero), ditos avançados, como tecnologia chave para atender às exigências do mercado atual de telecomunicações por transporte de grande volume de dados e alta largura de banda, associados com a redução do custo da informação transmitida por bit. Os formatos avançados de modulação óptica fazem parte das tecnologias que estão sendo investigadas intensamente com o objetivo de superar os desafios impostos pela nova geração de sistemas ópticos com taxas a partir de 40 Gb/s. Este trabalho focaliza o estudo dessa tecnologia, apresentando uma visão geral dos formatos mais discutidos atualmente, suas características e tecnologias de implementação. Foram realizadas simulações utilizando o software comercial Optisystem versão 7.0 da empresa canadense Optiwave Systems Inc., para analisar o desempenho de alguns formatos de modulação de intensidade e de fase com respeito à sensibilidade do receptor, resistência ao cascateamento de filtragem óptica e a efeitos dispersivos e não-lineares. Procurou-se avaliar os formatos em enlaces reais, com características necessárias à sua possível utilização. Também é feita uma breve consideração dos custos associados aos formatos de modulação analisados neste trabalho. Dentre os formatos analisados, os RZ (Return-to zero) apresentaram maior sensibilidade do receptor e melhor tolerância aos efeitos não-lineares que os seus equivalentes NRZ, porém baixa tolerância aos efeitos dispersivos e ao cascateamento de filtragem óptica. O formato duobinário mostrou fraco desempenho de sensibilidade, mas provou ser o mais tolerante à dispersão cromática e à concatenação de filtragem óptica. Os formatos de modulação de fase mostraram ser bem resistentes aos efeitos não-lineares e aos efeitos dispersivos. / This MSc thesis investigates optical modulation formats as an alternative to the use of the traditional intensity binary format NRZ (Non-return-to-zero). Those formats, classified as advanced, represent one of the key technologies aimed to enable the high data volume and broadband, demanded by the present telecommunication market, with cost reduction of transmitted information per bit. Those technologies have been intensevely studied with purpose of overcoming the challenges imposed by the new generation of optical systems, with bit rates from 40 Gb/s. This work focuses on the study of modulation formats most discussed currently, presenting an overview of their main characteristics and implementation techniques. The performance of some intensity and phase formats, in terms of receiver sensitivity, optical filtering cascading, dispersion and nonlinear effects robustness, have been theoretically analyzed from simulations carried out with the commercial software Optisystem v. 7.0, of the Canadian company Optiwave Systems Inc. The analysis has been applied to real optical links, with characteristics that, potentially, demand their use. A cost analysis, based on estimated values associated to devices required for implementing the formats investigated in this work, is also presented. Among the formats studied, those based on RZ (Return-to zero) presented the highest receiver sensitivity and best tolerance to nonlinear effects, in comparison to their equivalent formats, based on NRZ. However, they are less tolerant to dispersive effects and optical filtering cascading. The duobinary format (DB) has shown a weak performance in terms of sensitivity, though has been proved to be the most tolerant to chromatic dispersion and filtering cascading effects. Among all formats, the phase modulation ones presented the highest resistance against nonlinear and dispersive effects.

Neste trabalho propomos e analisamos algoritmos de alocação dinâmica de banda para rede óptica passiva (PON) de acesso padrão GPON (Gigabit PON). Estes algoritmos utilizam dados oriundos de SLA (service level agreement) para gerenciar a alocação de banda e classificar em 4 contêineres de tráfego (T-CONT) o tráfego gerado em 16 ONUs (optical network unit). Na transmissão upstream é utilizada a técnica de multiplexação por divisão de tempo (TDM) para gerenciar o acesso ao meio, evitando colisões. O primeiro algoritmo proposto aloca banda garantida para as ONUs e distribui a banda não utilizada de acordo com critério baseado em três SLAs. A taxa de bit upstream é 1,25 Gbps e o desempenho do algoritmo é analisado com base na variação do atraso de pacotes em função do tráfego gerado nas ONUs. O segundo algoritmo proposto utiliza ponderação de tráfego. Neste, analisamos o comportamento dos atrasos e a quantidade de banda solicitada e atendida por ONU quando as bandas garantida e extra são alteradas. Por fim, acrescentamos em nossa implementação um intervalo para o processamento do algoritmo de alocação dinâmica de banda (DBA) e resposta do hardware relacionado ao ciclo de interrogação. Então, analisamos o atraso de pacotes quando variamos o intervalo de processamento do DBA. Ao final, propomos uma solução preliminar para minimizar estes atrasos. Os resultados obtidos por meio de simulação computacional mostram a versatilidade dos algoritmos. / In this work we propose and analyze the performance of dynamic bandwidth allocation algorithms for optical passive networks (PON) in GPON standard (Gigabit PON). These algorithms use data from SLA (service level agreement) to manage bandwidth allocation and classify in 4 traffic containers (T-CONT) the traffic generated by 16 ONUs (optical network unit). In the upstream transmission the time division multiplexing (TDM) technique is used to manage the medium access, avoiding collisions. The first proposed algorithm allocates guaranteed bandwidth for the ONUs and distributes the bandwidth not used according to the criteria based on three SLAs. The upstream bit rate is 1.25 Gbps and the algorithm performance is analyzed based on the packets delay variation versus the traffic generated by ONUs. The second proposed algorithm uses weighted traffic. In this, we analyze the delay performance and the required bandwidth for each ONU and how much it is served when the guaranteed and extra bandwidth are changed. Finally, we added in our implementation an interval for the processing of the dynamic bandwidth allocation algorithm (DBA) and response of the hardware related to the interrogation cycle. In the end, we propose a preliminary solution to minimize these delays. The results obtained by means of computational simulation show the versatility of the algorithms.

Recently there is an emergence of many Internet applications such as multimedia, video conferencing, distributed interactive simulations (DIS), and high-performance scientific computations like Grid computing. These applications require huge amount of bandwidth and a viable communication paradigm to coordinate with multiple sources and destinations. Optical networks are the potential candidates for providing high bandwidth requirement. Existing communication paradigms include broadcast, and multicast. Hence supporting these paradigms over optical networks is necessary. Multicasting over optical networks has been well investigated in the literature. QoS policies implemented in IP does not apply for Wavelength division multiplexed (WDM) or optical burst switched (OBS) networks, as the optical counterpart for store-and-forward model does not exist. Hence there is a need to provision QoS over optical networks. These QoS requirements can include contention, optical signal quality, reliability and delay. To support these diverse requirements, optical networks must be able to manage the available resources effectively. Destinations participating in the multicast session are fixed (or rather static). Due to the random contention in the network, if at least one or more destination(s) is not reachable, requested multicast session cannot be established. This results in loss of multicast request with high probability of blocking. Incorporating wavelength converters (WCs) at the core nodes can decrease the contention loss, however WCs require optical-electrical-optical (O/E/O) conversion. This increases the delay incurred by optical signal. On the other hand all-optical WCs are expensive and increase the cost of the network if deployed. Goal of this thesis is, to provide hop-to-hop QoS on an existing all-optical network (AON) with no WC and optical regeneration capability. In order to minimize the request vi Abstract vii lost due to contention in AON, we propose a variation of multicasting called Quorumcasting or Manycasting. In Quorumcasting destinations can join (or leave) to (or from) the group depending on whether they are reachable or not. In other words destinations have to be determined rather than knowing them prior, as in the case of multicasting. Quorum pool is minimum number of destinations that are required to be participated in the session for successful accomplishment of the job (k be the size of quorum pool). Providing QoS for manycasting over OBS has not been addressed in the literature. Given the multicast group (with cardinality m > k) and the number of destinations required to be participated, the contribution of this work is based on providing necessary QoS. In this thesis we study the behavior of manycasting over OBS networks. In OBS networks, packets from the upper-layer (such as IP, ATM, STM) are assembled and a burst is created at the edge router. By using O/E/O conversion at the edge nodes, these optical bursts are scheduled to the core node. Control header packet or burst header packet (BHP) is sent to prior to the transmission of burst. The BHP configures the core nodes and the burst is scheduled on the channel after certain offset time. In the first part of the thesis, we explain the different distributed applications with primary focus on Grid over OBS (GoOBS). We study the loss scenario due contention and inadequate signal quality for an unicast case in OBS network. We further extend this to manycasting. We modify the BHP header fields to make the burst aware of not only contention on the next-hop link, but also bit-error rate (BER). By using recursive signal and noise power relations, we calculate the BER (or q-factor) of the link and schedule the burst only if the required BER threshold is met. Thus all the bursts that reach the next-hop node ensure that contention and BER constraint are met. This are called “Impairment-Aware (IA) Scheduling”. Burst loss in the network increases due to BER constraint. Hence we propose algorithms to decrease the burst loss and simultaneously providing the sufficient optical signal quality. We propose three algorithms called IA-shortest path tree (IA-SPT), IA-static over provisioning (IA-SOP), and IA-dynamic membership (IA-DM). In IA-SPT destination set is sorted in the non-decreasing order of the hop-distance from source. First k of them are selected and bursts are scheduled to Abstract viii these destinations along the shortest path. In IA-SOP we select additional k0(_ m − k) destinations where k0 is the over provisioning factor. Over provisioning ensures that burst at least reach k of them, decreasing the contention blocking. However as the burst has to span more destinations, the fan-out of the multicast capable switch will be more and the BER could be high. In IA-DM destinations are dynamically added or removed, depending on contention and BER. Destination is removed and new destination is added based on the two constraints. Our simulation results shows that IA-DM out performs the other two algorithms in terms of request blocking. We show that IP-based many casting has poor performance and hence there is a need for supporting many casting over OBS networks. We verify our simulation results with the proposed analytical method. In the next part, we focus on provisioning QoS in many casting. QoS parameters considered for analysis include, signal quality i.e., optical signal to noise ratio (OSNR), reliability of the link and, propagation delay. In this work we consider application based QoS provisioning. In other words, given the threshold requirements of an application, our aim is to successfully schedule the burst to the quorum pool satisfying the threshold conditions. We use a de-centralized way of the scheduling the burst, using BHP. With the help of local-network state information, the burst is scheduled only if it satisfies multiple set of constraints. Corresponding reception of burst at the node ensures that all the QoS constraints are met and burst is forwarded to the next hop. QoS attributes are either multiplicative or additive. Noise factor of the optical signal and reliability factor are multiplicative constraints, where as propagation delay is additive. We define a path information vector, which provides the QoS information of the burst at every node. Using lattice theory we define an ordering, such that noise factor and propagation delay are minimum and reliability is maximum. Using path algebra we compute the overall QoS attributes. Due to multiple set of constraints, the request blocking could be high. We propose algorithms to minimize request blocking for Multiple Constrained Many cast Problem (MCMP). We propose two algorithms MCM-SPT and MCM-DM. We consider different set of service thresholds, such as real time and data service thresholds. Real time services impose restriction on signal quality and the propagation delay. On the other hand Abstract ix data services require high reliability and signal quality. Our simulation study shows that MCM-SPT performs better than MCM-DM for real-time services and the data services can be provisioned using MCM-DM.