As the international community takes increasing action to mitigate the effects of climate change, increased focus has been placed on the topic of energy transitions in developing countries. This paper uses the multi-level perspective (MLP) framework to analyze the ongoing energy transition in Mongolia, specifically the integration of large-scale wind and solar energy systems. Attention is paid to the presence of transnational linkages and intermediaries that have substantially contributed to Mongolia’s success in diffusing renewable energy technology, as well as challenges Mongolia has faced as a result of limited technological and institutional capacity. The paper concludes that Mongolia’s transition shares many similarities with other developing countries’ transitions, in that transition dynamics are highly influenced by exogenous actors and interests, rather than traditional factors as described by the MLP.

This licentiate thesis presents a new way of understanding Electric Power. The new perspective on Electric Power highlights the similarities between our banking system and our power system. The two different systems share a common abstraction. In the case of the banking system this abstraction is fully accepted. In the case of the power system this abstraction is not yet fully accepted. This thesis aims to clarify this abstraction and show the parallelism between the two systems and the two abstractions. This thesis examines what the Product Electricity really is. What is it, in reality, we sign a power contract to buy and pay for, and how is this product transferred to us? This new understanding challenges the old, physical understanding of Electric Power. Understanding the similarity between our banking system and our power system becomes important when we examine our Power Markets, and it becomes absolutely vital to understand for those investing in new power generation. In no way does this new understanding of Electric Power question or challenge the physics behind power generation and power transfer. Maxwell’s equations holds true. The laws of Ohm and Kirchhoff are still the laws by which the electrical and power system engineers must abide. But when it comes to the Product Electricity, the product traded on our Power Markets, the product that we sign power contracts to buy and pay for, there is a major difference. The new understanding challenges the old quite dramatically. It does in fact show that the old, physical perspective on the Product Electricity is flawed and has been a misconception for over a century. My primary goal in this thesis is to thoroughly explain the new perspective and by so doing clarify and dissolve the old misconception of what the Product Electricity actually is. The scientific theory of the Greenhouse Effect now has over 195 years of published peer-reviewed science.[[i]] The threat of accelerating Climate Change is a scientifically solid fact. The Paris agreement must be met. My second goal with this thesis is to make credible that an electrification of our society is a possible and viable option. The possibility of a swift energy transition from fossil fuels to renewable electricity is made more likely, and more viable, thanks to the new understanding of what Electric Power really is, because now we have the de facto choice of not consuming any fossil power. © Per Ribbing, April 2019 [i] Joseph Fourier, Remarques générales sur les températures du globe terrestre et des espaces planétaires”, Annales de Chimie et de Physique, 27, 1824, p. 136-167

Today's utilities face new challenges due to the continually increasing penetration of residential solar and other distributed, stochastic generation sources. In order to maintain balance and stability in the grid without building costly, large-scale generation plants, utilities are turning to distributed energy resources for use in demand response programs. Demand response is a cost-efficient way to balance grid load/generation without the need for increased capital investment in traditional generation resources. Demand response programs are excellent exploiters of end-user devices that otherwise further accentuate the daily load curve and thus, add to the difficulties created by daily load peaks. Electric water heaters are excellent candidates for use in demand response programs for a variety of reason. One, electric water heaters represent a large portion of daily household loads due to their high nominal power ratings (1.5 kW - 5.5kW), and frequent use estimated to account for approximately one third of all daily residential power demand. Two, they are composed of strictly resistive elements, which greatly simplifies modeling, aggregation and control. And third, they can be used for load "shedding" during periods of high electrical demand as well as load "absorbing" during periods of excess generation due to their thermal storage capabilities. With improved access and control, electric water heaters could become a major distributed energy resource for utilities. In order to properly control and use a distributed energy resource, it is important to know how these resources operate and their patterns of behavior in different environments. This thesis presents a single-element, single mass electric water heater model for analyzing the effectiveness of using electric water heaters as distributed energy resources and for participation in demand response programs. The CTA-2045 communication protocol was used for testing demand response signals. The electric water heater is modeled in Python and the communication pathway was built in C++ and Python.

Two experiments have been conducted to ascertain if a cell with a palladium cathode, a platinum anode, and a solution of H2SO4 in D2O can produce excess heat under electrolysis compared to a similar cell with H2O. In each experiment, two cells were connected in series with constant current. The two cells were identical except for the fact that the heavy water cell used D2O instead of H2O in the electrolyte. Both cells in each experiment employed Pd cathodes, Pt anodes, and H2SO4 in the solution. On a piece of Pd foil that had been cold-rolled and cleaned like the cathodes but had not been electrolyzed, scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS) failed to find any traces of unexpected elements. In the first experiment the indication was that the light water cell was slightly warmer despite receiving slightly less power. Small amounts of silver were found on both cathodes after electrolysis. In the second experiment, the D2O cell produced an excess heat relative to the H2O cell that was too large by at least an order of magnitude to be explainable by chemical reactions or mechanical artifacts. After electrolysis, it was found that Cd was present on the surface of the H2O cathode at levels of concentration that were variable but generally no less than 4% relative to Pd (above 3σ). The H2O cathode of this second experiment finished electrolysis very straight. The D2O cell cathode finished severely arched (~30o), with its convex side facing the anode, and covered in a deposit of powdery black substance which was most likely PdS formed accidentally on the first day of this experiment when the D2O cell had been run with the wrong polarity. On this D2O cell cathode, no statistically significant traces of Cd were detected but Ag was present in 2-5% concentration relative to Pd. In some spots, the Ag abundance surpassed 20% that of Pd. The most likely explanation is neutron-induced nuclear transmutation of some of the Pd nuclides with direct release of heat into the solid-state lattice.

From the steady rise in dairy farm closures to concerns over algae blooms in Lake Champlain, Vermont’s dairy industry is facing a multitude of challenges. While many potential solutions have been proposed, this study focuses specifically on community anaerobic digester systems (CADS) to aid in manure management, help to mitigate runoff, produce renew energy, and even provide an alternative revenue source to participating farms. CADS technology converts the gas emissions from manure and other organic substances into biogas through a process called anaerobic digestion. Unlike traditional on-farm biodigesters, which are often only financially viable for the largest dairy farms, CADS are able to accept both manure from multiple dairy farms and food waste from the surrounding community. In Vermont, consumers can purchase biogas-produced electricity from biodigesters in the state for an additional cost through Green Mountain Power’s Cow Power program. However, little research has been conducted regarding the success of CADS-produced electricity on the consumer market. This thesis focuses on two surveys conducted in Randolph, Vermont and Addison County exploring attitudes of local biodigesters in relation to other renewable energy sources available to consumers, as well as issues related to composting and recycling. The objective of this study is to provide policy makers and biodigester operators a better understanding of community attitudes of biodigesters compared to other renewable energy systems, as well as willingness to participate in paid services that could support the operation of the biodigesters. In 2017, a survey was distributed to households in Randolph, the location of the Vermont Technical College CADS, through the local newspaper. A second survey was also conducted in 2019, distributed via newspaper to residents in Addison County, a dairy county home to four operational biodigesters. Results from the 2017 survey suggest that there is generally a low willingness to pay for the Cow Power program and food waste removal services that support biodigesters, although targeted educational approaches focusing on how CADS benefit the community may improve attitudes towards them. The 2019 survey shows similar levels of willingness to participate and pay, although attitudes of biodigesters and public support for anaerobic digester technology were considerably higher. Through educational outreach efforts, community acceptance of biodigesters can be improved to avoid cancellation of projects due to lack of community support.

One of the biggest threats to the power systems as critical infrastructures is large-scale blackouts resulting from cascading failures (CF) in the grid. The ongoing shift in energy portfolio due to ever-increasing penetration of renewable energy sources (RES) may drive the electric grid closer to its operational limits and introduce a large amount of uncertainty coming from their stochastic nature. One worrisome change is the increase in CFs. The CF simulation models in the literature do not allow consideration of RES penetration in studying the grid vulnerability. In this dissertation, we have developed tools and models to evaluate the impact of RE penetration on grid vulnerability to CF. We modeled uncertainty injected from different sources by analyzing actual high-resolution data from North American utilities. Next, we proposed two CF simulation models based on simplified DC power flow and full AC power flow to investigate system behavior under different operating conditions. Simulations show a dramatic improvement in the line flow uncertainty estimation based on the proposed model compared to the simplified DC OPF model. Furthermore, realistic assumptions on the integration of RE resources have been made to enhance our simulation technique. The proposed model is benchmarked against the historical blackout data and widely used models in the literature showing similar statistical patterns of blackout size.

In this research paper, review of world geothermal energy production and their capacity is shown. Here, a research is conducted to know the potential and possibility of geothermal energy in India. All the geothermal province with their geographical locations are shown and a brief calculation is conducted in order to show the potential of the particular province. As India is having the low temperature geothermal fields, binary geothermal plants are used for this analysis and results are calculated by using R134a as a working fluid at different temperatures. The results are sufficient to prove the potential of geothermal energy in India.  Importance of Ground Source Heat Pump (GSHP) and power savings by its contribution over traditional heating and cooling methods is shown statistically. 9 different states of India are divided by their climatic condition, severe winter and moderate winter to calculate the heat demand in those states. Also, for the cold demands these states are considered to be same as per the climatic situation in summer. Then, comparison is done between GSHP and the traditional heating and cooling systems. The result shows the drastic power saving by using GSHP for space heating as well as cooling, over electric heater and air conditioner respectively.

Uncertainty about anaerobic digestion process stability is the main issue preventing more widespread use of the process as a source of energy recovery in wastewater treatment facilities. The overall objective of this research was to study the feasibility of enhancing biogas production inside wastewater facilities using co-digestion of municipal sludge with bakery waste. Another objective was to improve the stability index and a mathematical model that can be useful tools to predict the process stability of municipal sludge digestion alone, and when it is mixed with bakery waste, as a substrate for microorganisms. Experiments were conducted in three phases. In phase 1, a full-scale anaerobic digester at Central Weber Sewer Improvement District, Ogden, UT, receiving a mixture of primary and secondary sludge, was monitored for one hundred days. Chemical oxygen demand (COD), and volatile solids (VS) mass balances were conducted to evaluate the stability of the digester and its capability of producing methane gas. The COD mass balance accounted for nearly 90% of the methane gas produced while the VS mass balance showed that 91% of the organic matter removed resulted in biogas formation. Other parameters monitored included: pH, alkalinity, VFA, and propionic acid. The values of these parameters showed that the digester was running under stable steady state conditions. At mesophilic temperature, the stability index was determined and equal to 0.40 L (CH4)/ g(ΔVS) In phase 2, the feasibility of adding BW to MS was tested in batch reactors scale. The biogas production was enhanced and the digester was stable until the range of 37- 40% of BW to 63-60% of MS. The ADM1 coefficients were modified to accurately predict the digester performance. The modified model outputs (pH, VFA, and methane) were within acceptable ranges when compared with the observed data from the batch reactors. In phase 3, the feasibility of MS and BW were tested using an Induced Bed Reactor (IBR) with a 50:50% ratio of MS:BW (COD basis). The process was stable during different hydraulic retention times and the ADM1 was modified to predict the stability of the process in the IBR.

The goal of the Non-Traditional Agronomic Land (NTAL) Project is to develop sustainable, agronomic, crop growth methods that will allow biofuel feedstock production to occur on marginal or non-traditional plots of land, e.g., roadways, railroads, airports, and military installations. Recent economic feasibility models by Utah State University (USU) indicate these lands could, in theory, produce one billion gallons of economically viable new feedstock annually. Specifically, USU models show that if 60 % (600 pounds/acre) of dry land oilseed can be produced, maintenance costs of these NTALs can be recovered, as well as production of approximately 25 gallons/acre of renewable biodiesel. This feedstock yield would increase U.S. biodiesel production between 100- 200 %, and save federal and state agencies substantial financial resources. Preliminary impact considerations that have been taken into account for production on non-traditional land include: safety, structural integrity, economics, wildlife impacts, ecology/environmental impacts, water quality and grower concerns, soil quality, water use, generation/reduction of hazardous/toxic substances, air emissions, wastewater discharges, and reductions in use of pesticides and fertilizer. Canola and Safflower plots were established in 2007 and 2008 along roadsides in four different regions of the Utah I-15 corridor. Harsh climatic conditions with above average temperatures and below average precipitation existed in both years. Less than 50 % average yields for safflower and 25 % average yields for canola under normal climatic conditions were produced. Roadside plots all yielded under 200 pounds/acre of seed for both crops. In 2008, seeds were placed 2 inches deep during planting to position them closer to moisture, and no measureable yield was observed for any crops in control plots planted on traditional farmland and less than 10 pounds/acre in roadside plots. We found that it was not economical to grow oilseed crops for biodiesel production along Utah roadsides under the climatic conditions experienced during 2007- 2008 while using a Tye Pasture Pleaser No-Till Drill. (98 Pages)

Perovskite-type oxides show irrefutable potential for feasible thermochemical solar-driven CO2 conversion. These materials exhibit the exact characteristics required by the low temperature reverse water-gas shift chemical looping process. These properties include structural endurance and high oxygen redox capacity, which results in the formation of numerous oxygen vacancies, or active sites for CO2 conversion. A major drawback is the decrease in oxygen self-diffusion with increasing perovskite particle size. In this study, the La0.75Sr0.25FeO3 (LSF) perovskite oxide was combined with various supports including popular redox materials CeO2 and ZrO2 along with more abundant alternatives such as Al2O3, SiO2, and TiO2, in view of its potential application at industrial scale. Supporting LSF on SiO2 by 25% mass resulted in the largest increase of 150% in CO yields after reduction at 600 °C. This result was a repercussion of significantly reduced perovskite particle size confirmed by SEM/TEM imaging and Scherrer analyses of XRD patterns. Minor secondary phases were observed during the solid-state reactions at the interface of SiO2 and TiO2. Density functional theory-based calculations, coupled with experiments, revealed oxygen vacancy formation only on the perovskite phase at these low temperatures of 600 °C. The role of each metal oxide support towards suppressing or enhancing the CO2 conversion has been elucidated. Through utilization of SiO2, the reverse water-gas shift chemical looping process using perovskite-based composites was significantly improved.