Doctoral thesis deals with the deposition of special thixotropic materials for microelectronic technology. The aim of the work is the development of the new method optimizing the dosing process in order to achieve a print resolution of better than 100 microns. The work includes the development of a special dispensing head (UZD) using the influence of ultrasonic energy. These results demonstrate the possibility of a newly developed method that is able to print thixotropic materials with a resolution of 65 microns. Compared to other methods achieves these results with the commonly used materials for thick film technology with particle size up to 5 microns.

Disertační práce se zabývá experimentálním studiem viskosuplementů na bázi kyseliny hyaluronové, které se aplikují do synoviálních kloubů postižených osteoartrózou. Hlavní pozornost byla věnována objasnění vlivu koncentrace a molekulové hmotnosti kyseliny hyaluronové na tření v kontaktu kloubí chrupavky resp. změnám tření v kontaktu po smíchání osteoartritické synoviální kapaliny s exogenní kyselinou hyaluronovou. Důležitou součástí experimentů bylo rovněž studium reologických vlastností synoviální kapaliny a kyseliny hyaluronové. Výsledky ukázaly, že molekulová hmotnost kyseliny hyaluronové významně ovlivňuje viskozitu a viskoelastické vlastnosti roztoku. Výrazná závislost mezi reologickými vlastnostmi kyseliny hyaluronové a třením v kontaktu však nebyla pozorována. Přimíchání kyseliny hyaluronové do synoviální kapaliny způsobí výrazný pokles součinitele tření v kontaktu. Rozdíly mezi viskosuplementy obsahující kyselinu hyaluronovou s různou molekulovou hmotností ale nijak výrazné nejsou. Nicméně, výsledky poukazují na možné ovlivnění režimu mazání v důsledku vysoké molekulové hmotnosti kyseliny hyaluronové. Tyto původní výsledky rozšiřují pochopení mechanizmů, ke kterým dochází v kloubu bezprostředně do vstříknutí kyseliny hyaluronové a mohou být použity při dalším vývoji viskosuplementů či v klinické praxi.

No description available.

No description available.

No description available.

No description available.

Temperature has a reliable and nearly instantaneous influence onmechanical responses of cells.As recently published, MCF-10Anormal epithelial breast cells follow the time–temperature superposition (TTS) principle. Here,wemeasured thermorheological behaviour of eightcommoncell types within physiologically relevant temperatures and appliedTTS to creep compliance curves.Our results showed that superposition is not universal and was seen in four of the eight investigated cell types. For the other cell types, transitions of thermorheological responses were observed at 36 °C.Activation energies (EA)were calculated for all cell types and ranged between 50 and 150 kJmol−1.The scaling factors of the superposition of creep curves were used to group the cell lines into three categories. They were dependent on relaxation processes aswell as structural composition of the cells in response tomechanical load and temperature increase.This study supports the view that temperature is a vital parameter for comparing cell rheological data and should be precisely controlledwhen designing experiments.

No description available.

[pt] Os hidratos são compostos cristalinos semelhantes ao gelo, formados por uma combinação de água e gás. A medida que a indústria de petróleo e gás natural vem se expandindo cada vez mais para águas mais profundas e geladas, a formação de hidratos em emulsões do tipo água em óleo (A/O) é um problema a ser considerado. O problema associado a formação de hidratos reside principalmente em seu elevado potencial para interromper ou prejudicar o escoamento nos dutos, o que eleva a custos proibitivos as operações de perfuração e produção. No que diz respeito a este cenário, a indústria de óleo e gás vem investindo em métodos para gerenciar o risco de formação de hidratos, de modo a prevenir um bloqueio total do escoamento. Uma das alternativas dessa estratégia é estudar a relação entre a variação de propriedades reológicas e a formação do hidrato usando um fluido modelo. Todavia, usualmente os hidratos são formados sob baixa temperatura e alta pressão, condição esta que representa um obstáculo a este tipo de estudo. A solução para tal problema é utilizar compostos que formem hidrato a pressão atmosférica, como por exemplo, o ciclopentano, que é liquido a temperatura ambiente. O presente trabalho visou analisar diferentes métodos de preparo para formação de emulsões do tipo A/O. Foram produzidas emulsões com corte de água variando de 20 a 40 por cento, com dois tipos de óleos minerais: Morlina S2 BL 10 e Morlina S2 B 150. Para todas as emulsões, foi utilizada uma mistura de surfactantes, Span 80 e AOT, com duas diferentes concentrações: 1 e 5 por cento em peso dos tensoativos. Após a produção desses fluidos modelos, estudou-se a reologia dos mesmos, sem e com ciclopentano, sendo estes últimos submetidos a condições de formação de hidratos em testes oscilatórios. / [en] Hydrates are crystalline compounds similar to the ice formed by a combination of water and gas. Once the oil and gas industry expands into deeper and icy waters, the formation of hydrates in water-in oil (w/o) emulsions should be considered. The problem associated with hydrate formation lies mainly in its high potential to stop or damage the flow in pipelines, which increases to prohibitive costs the operations of drilling and production. Regarding this scenario, the oil and gas industry has been investing in methods to manage the risk of hydrate formation, in order to prevent a total blockage of the flow. One of the alternatives of this strategy is to study the relationship between the change of rheological properties and the formation of hydrate in a fluid model. However, usually natural gas hydrates are formed under low temperature and high pressure condition, which is a barrier to this type of study. The solution to this problem is to use certain compounds that form hydrate at atmospheric pressure, such as cyclopentane, which is liquid at room temperature. This study aimed to analyze different methods of preparation for the formation of w/o emulsions. The emulsions were prepared with water cut ranging from 20 to 40 percent and with two different mineral oils: Morlina S2 BL 10 and Morlina S2 B 150. In all cases, a surfactant blend, composed by Span 80 and AOT, was added, with two different concentrations: 1 and 5 wt percent surfactant mixture in respect to the total emulsion weight. After the production of these fluid models, it was studied the rheology of those without and with cyclopentane, which were submitted to hydrate formation conditions in oscillatory tests.

This study investigated a CNF/dendrimer hydrogel and how different concentrations of the carboxylated CNF and bis-MPA ammonium dendrimer affected the hydrogels’ rheological properties. A third generation bis-MPA ammonium dendrimer was diffused into a dispersion of carboxylated cellulose nanofibrils. The CNF was carboxylated by TEMPO-oxidation and phosphate buffer deprotonating the carboxylic group. The ammonium dendrimers are cationic and, when added to the dispersion, act as a salt together with the CNF-carboxy anion creating a cationic dendrimer salt bridge. These will serve as physical crosslinks, and a CNF/dendrimer network is formed; the structure and the absorbed water make a hydrogel. Amplitude strain sweeps were performed with a rheometer to determine the gels' elastic capabilities in terms of storage modulus, G’ and loss modulus, G” as the function of the shear stress. The result shows that a higher concentration of both CNF dispersion and dendrimer yielded a higher value of the storage modulus and a lower critical strain, meaning that the hydrogel becomes firmer and less elastic. / I denna studie undersöktes en CNF/dendrimer hydrogel och hur olika koncentrationer av den karboxylerade CNF och bis-MPA ammonium dendrimer påverkar hydrogelens reologiska egenskaper. En tredje generations bis-MPA ammonium dendrimer läts diffusera i en dispersion av karboxylerade cellulosa nanofibriller (CNF). CNF karboxylerades via TEMPO-oxidation, varefter en fosfatbuffer adderades för att skapa en anjon. Dendrimerens ammoniumgrupper är katjoner och då den adderas till dispersionen kommer den agera som ett salt tillsammans med CNF-karboxyanjonen vilket skapar en katjonisk dendrimersaltbrygga. Denna agerar som en fysisk tvärbindning och skapar ett nätverk av CNF och dendrimer. Nätverket skapar tillsammans med det absorberade vattnet en hydrogel.  En amplitude strain sweep utfördes för att bestämma gelernas viskoelastiska förmåga, från mätningarna fås elasticitetsmodulen, G’ och den viskösa modulen, G’’ som funktioner av skjuvningen. Resultatet visar att en högre koncentration av CNF-dispersionen och dendrimeren leder till ett högre värde på elasticitetsmodulen samt ett lägre värde för den kritiska skjuvningen. Detta innebär att hydrogelen blir hårdare och mindre elastisk.