The analysis of dynamic systems provides insights into their time-dependent characteristics. This enables us to monitor, evaluate, and improve systems from various areas. They are often represented as graphs that model the system's components and their relations. The analysis of the resulting dynamic graphs yields great insights into the system's underlying structure, its characteristics, as well as properties of single components. The interpretation of these results can help us understand how a system works and how parameters influence its performance. This knowledge supports the design of new systems and the improvement of existing ones. The main issue in this scenario is the performance of analyzing the dynamic graph to obtain relevant properties. While various approaches have been developed to analyze dynamic graphs, it is not always clear which one performs best for the analysis of a specific graph. The runtime also depends on many other factors, including the size and topology of the graph, the frequency of changes, and the data structures used to represent the graph in memory. While the benefits and drawbacks of many data structures are well-known, their runtime is hard to predict when used for the representation of dynamic graphs. Hence, tools are required to benchmark and compare different algorithms for the computation of graph properties and data structures for the representation of dynamic graphs in memory. Based on deeper insights into their performance, new algorithms can be developed and efficient data structures can be selected. In this thesis, we present four contributions to tackle these problems: A benchmarking framework for dynamic graph analysis, novel algorithms for the efficient analysis of dynamic graphs, an approach for the parallelization of dynamic graph analysis, and a novel paradigm to select and adapt graph data structures. In addition, we present three use cases from the areas of social, computer, and biological networks to illustrate the great insights provided by their graph-based analysis. We present a new benchmarking framework for the analysis of dynamic graphs, the Dynamic Network Analyzer (DNA). It provides tools to benchmark and compare different algorithms for the analysis of dynamic graphs as well as the data structures used to represent them in memory. DNA supports the development of new algorithms and the automatic verification of their results. Its visualization component provides different ways to represent dynamic graphs and the results of their analysis. We introduce three new stream-based algorithms for the analysis of dynamic graphs. We evaluate their performance on synthetic as well as real-world dynamic graphs and compare their runtimes to snapshot-based algorithms. Our results show great performance gains for all three algorithms. The new stream-based algorithm StreaM_k, which counts the frequencies of k-vertex motifs, achieves speedups up to 19,043 x for synthetic and 2882 x for real-world datasets. We present a novel approach for the distributed processing of dynamic graphs, called parallel Dynamic Graph Analysis (pDNA). To analyze a dynamic graph, the work is distributed by a partitioner that creates subgraphs and assigns them to workers. They compute the properties of their respective subgraph using standard algorithms. Their results are used by the collator component to merge them to the properties of the original graph. We evaluate the performance of pDNA for the computation of five graph properties on two real-world dynamic graphs with up to 32 workers. Our approach achieves great speedups, especially for the analysis of complex graph measures. We introduce two novel approaches for the selection of efficient graph data structures. The compile-time approach estimates the workload of an analysis after an initial profiling phase and recommends efficient data structures based on benchmarking results. It achieves speedups of up to 5.4 x over baseline data structure configurations for the analysis of real-word dynamic graphs. The run-time approach monitors the workload during analysis and exchanges the graph representation if it finds a configuration that promises to be more efficient for the current workload. Compared to baseline configurations, it achieves speedups up to 7.3 x for the analysis of a synthetic workload. Our contributions provide novel approaches for the efficient analysis of dynamic graphs and tools to further investigate the trade-offs between different factors that influence the performance.

Im Folgenden wird ein Promotionsprojekt zur Implementierung und Optimierung von hybriden Indexstrukturen beschrieben. Die erhöhte Suchperformance wird bei hybriden Indexstrukturen durch einen höheren Aufwand an Vorberechnungen bei Einfügeoperationen erreicht. Dadurch ergibt sich, im Gegensatz zu Ansätzen, welche mehrere Indexstrukturen miteinander verbinden oder getrennte Suchanfragen ausführen eine Effizienz der Reorganisation hybrider Indexstrukturen, die prohibitiv für den Einsatz in den meisten Anwendungen ist. Diese sollen innerhalb des Promotionsprojekts optimiert werden, um eine Einsatzfähigkeit in realistischen Szenarien gewährleisten zu können.

Im Rahmen des FACETS-Projektes ist die optimierte Abbildung neuronaler Netzwerke durch spezielle Algorithmen auf dafür konzipierte Hardware notwendig, um die Simulation plastischer und pulsierender Modelle zu ermöglichen. Die Erstellung der biologischen und Hardware- Modelle sowie die Konzeptionierung und Analyse der Algorithmen werden in dieser Arbeit vorgestellt.

No description available.

The analysis of dynamic systems provides insights into their time-dependent characteristics. This enables us to monitor, evaluate, and improve systems from various areas. They are often represented as graphs that model the system's components and their relations. The analysis of the resulting dynamic graphs yields great insights into the system's underlying structure, its characteristics, as well as properties of single components. The interpretation of these results can help us understand how a system works and how parameters influence its performance. This knowledge supports the design of new systems and the improvement of existing ones. The main issue in this scenario is the performance of analyzing the dynamic graph to obtain relevant properties. While various approaches have been developed to analyze dynamic graphs, it is not always clear which one performs best for the analysis of a specific graph. The runtime also depends on many other factors, including the size and topology of the graph, the frequency of changes, and the data structures used to represent the graph in memory. While the benefits and drawbacks of many data structures are well-known, their runtime is hard to predict when used for the representation of dynamic graphs. Hence, tools are required to benchmark and compare different algorithms for the computation of graph properties and data structures for the representation of dynamic graphs in memory. Based on deeper insights into their performance, new algorithms can be developed and efficient data structures can be selected. In this thesis, we present four contributions to tackle these problems: A benchmarking framework for dynamic graph analysis, novel algorithms for the efficient analysis of dynamic graphs, an approach for the parallelization of dynamic graph analysis, and a novel paradigm to select and adapt graph data structures. In addition, we present three use cases from the areas of social, computer, and biological networks to illustrate the great insights provided by their graph-based analysis. We present a new benchmarking framework for the analysis of dynamic graphs, the Dynamic Network Analyzer (DNA). It provides tools to benchmark and compare different algorithms for the analysis of dynamic graphs as well as the data structures used to represent them in memory. DNA supports the development of new algorithms and the automatic verification of their results. Its visualization component provides different ways to represent dynamic graphs and the results of their analysis. We introduce three new stream-based algorithms for the analysis of dynamic graphs. We evaluate their performance on synthetic as well as real-world dynamic graphs and compare their runtimes to snapshot-based algorithms. Our results show great performance gains for all three algorithms. The new stream-based algorithm StreaM_k, which counts the frequencies of k-vertex motifs, achieves speedups up to 19,043 x for synthetic and 2882 x for real-world datasets. We present a novel approach for the distributed processing of dynamic graphs, called parallel Dynamic Graph Analysis (pDNA). To analyze a dynamic graph, the work is distributed by a partitioner that creates subgraphs and assigns them to workers. They compute the properties of their respective subgraph using standard algorithms. Their results are used by the collator component to merge them to the properties of the original graph. We evaluate the performance of pDNA for the computation of five graph properties on two real-world dynamic graphs with up to 32 workers. Our approach achieves great speedups, especially for the analysis of complex graph measures. We introduce two novel approaches for the selection of efficient graph data structures. The compile-time approach estimates the workload of an analysis after an initial profiling phase and recommends efficient data structures based on benchmarking results. It achieves speedups of up to 5.4 x over baseline data structure configurations for the analysis of real-word dynamic graphs. The run-time approach monitors the workload during analysis and exchanges the graph representation if it finds a configuration that promises to be more efficient for the current workload. Compared to baseline configurations, it achieves speedups up to 7.3 x for the analysis of a synthetic workload. Our contributions provide novel approaches for the efficient analysis of dynamic graphs and tools to further investigate the trade-offs between different factors that influence the performance.:1 Introduction 2 Notation and Terminology 3 Related Work 4 DNA - Dynamic Network Analyzer 5 Algorithms 6 Parallel Dynamic Network Analysis 7 Selection of Efficient Graph Data Structures 8 Use Cases 9 Conclusion A DNA - Dynamic Network Analyzer B Algorithms C Selection of Efficient Graph Data Structures D Parallel Dynamic Network Analysis E Graph-based Intrusion Detection System F Molecular Dynamics

This thesis explores the possibility of using parallel algorithms to calculate the dynamics of driven quantum systems prevalent in atomic physics. In this process, new as well as existing algorithms are considered. The thesis is split into three parts. In the first part an attempt is made to develop a new formalism of the time dependent Schroedinger equation (TDSE) in the hope that the new formalism could lead to a parallel algorithm. The TDSE is written as an eigenvalue problem, the ground state of which represents the solution to the original TDSE. Even though mathematically sound and correct, it turns out the ground state of this eigenvalue problem cannot be easily found numerically, rendering the original hope a false one. In the second part we borrow a Bayesian global optimisation method from the machine learning community in an effort to find the optimum conditions in different systems quicker than textbook optimisation algorithms. This algorithm is specifically designed to find the optimum of expensive functions, and is used in this thesis to 1. maximise the electron yield of hydrogen, 2. maximise the asymmetry in the photo-electron angular distribution of hydrogen, 3. maximise the higher harmonic generation yield within a certain frequency range, 4. generate short pulses via combining higher harmonics generated by hydrogen. In the last part, the phenomenon of dynamic interference (temporal equivalent of the double-slit experiment) is discussed. The necessary conditions are derived from first principles and it is shown where some of the previous analytical and numerical studies have gone wrong; it turns out the choice of gauge plays a crucial role. Furthermore, a number of different scenarios are presented where interference in the photo-electron spectrum is expected to occur.

Tetrahedral meshes are becoming more and more important for geo-modeling applications. The presented work introduces new algorithms for efficient visualization and modeling of tetrahedral meshes. Visualization consists of a generic framework that includes the extraction of geological information like stratigraphic columns, fault block boundaries, simultaneous co-rendering of different attributes and boolean operations of Constructive Solid Geometry with constant complexity. Modeling can be classified into geometric and implicit modeling. Geometric modeling addresses local mesh refinement to increase the numerical resolution of a given mesh. Implicit modeling covers the definition and manipulation of implicitly defined models. A new surface reconstruction method was developed to reconstruct complex, multi-valued surfaces from noisy and sparse data sets as they occur in geological applications. The surface can be bounded and may have discontinuities. Further, this work proposes a new and innovative algorithm for rapid editing of implicitly defined shapes like horizons based on the GeoChron parametrization. The editing is performed interactively on the 3d-volumetric model and geological constraints are respected automatically.

The book summarises the results of the DFG-funded coordinated priority programme \"Fast Algorithms for Material Specific Process Chain Design and Analysis in Metal Forming\". In the first part it includes articles which provide a general introduction and overview on the field of process modeling in metal forming. The second part collates the reports from all projects included in the priority programme.

Decentralised power systems with a high portion of power generated from renewable energy sources and cogeneration units (CHP) are emerging worldwide. Optimising the energy usage of such systems is a difficult task as the stochastic fluctuations of generation from renewable sources, the coupling of electrical and thermal power generation by CHP and the time dependence of necessary storage devices require new approaches. Evolutionary algorithms are able to solve the optimisation task of the energy management. They use the principles of erroneous replication and cumulative selection that can be observed in biological processes, too. Very often recombination is included in the optimisation process. Using these quite simple principles the algorithm is able to explore difficult, large and high dimensional solution spaces. It will converge to the optimal solution in most of the cases quite fast, compared to other types of optimisation algorithms. At the example of an one dimensional replicator it is derived that the convergence speed in optimising convex functions increases by several orders of magnitude even after a few cycles compared to Monte-Carlo-simulation. For several types of equipment models are developed in this work. The cost to operate a given power system for a given time span is chosen as objective function. There is a variety of parameters (more than 15) that can be set in the algorithm. With quite extensive investigations it could be shown that the product of number of replicators and the number of calculated cycles has the most important influence on the quality of the solution but the calculation time is also proportional to this number. If there are reasonable values chosen for the remaining parameters the algorithm will find appropriate solutions in adequate time in most of the cases. Although a pure evolutionary algorithm will converge to a solution the convergence speed can be greatly enhanced by extending it to a hybrid algorithm. Grouping the replicators of the first cycle in suggestive regions of the solution space by an intelligent initialisation algorithm and repairing bad solutions by introducing a Lamarckian repair algorithm makes the optimisation converge fast to good optima. The algorithm was tested using data of several existing energy systems of different structure. To optimise the energy usage in a power system with 15 different types of units the required computation time is in the range of 15 minutes. The results of this work show that extended hybrid evolutionary algorithms are suitable for integrated optimisation of energy usage in combined local energy systems. They reach better results with the same or less effort than many other optimisation methods. The developed method of optimisation of energy usage can be applied in energy systems of small and large size and complexity as optimisation computations of energy systems on the island of Cape Clear, at FH Offenburg and in the Allgäu demonstrate.

Die digitale Nahbereichsphotogrammetrie ermöglicht eine effiziente Erfassung dreidimensionaler Objektoberflächen bei experimentellen Untersuchungen. Besonders für die flächenhafte Erfassung von Verformungen und die Rissdetektion sind photogrammetrische Verfahren – unter Beachtung entsprechender Randbedingungen – prinzipiell geeignet. Der Beitrag geht unter Einbeziehung aktueller Untersuchungen an textilbewehrten Betonproben auf die Problematik der Rissdetektion ein und gibt einen Überblick über den Entwicklungsstand und das erreichbare Genauigkeitspotential. In Bezug auf die praktische Anwendung der vorgestellten Verfahren wird abschließend auf verschiedene Möglichkeiten der Optimierung eingegangen.