Yes / Recent studies have reported that quantifying symphyseal and auricular surfaces curvature changes on 3D models acquired by laser scanners have a potential for age estimation. However, no tests have been carried out to evaluate the repeatability of the results between different laser scanners. 3D models of the two pelvic joints were generated using three laser scanners (Custom, Faro, Minolta). The surface curvature, the surface area and the distance between co-registered meshes were investigated. Close results were found for surface areas (differences between 0.3% and 2.4%) and for distance deviations (average < 20 μm, SD < 200 μm). The curvature values were found to be systematically biased between different laser scanners, but still showing similar trends with increasing phases / scores. Applying a smoothing factor to the 3D models, it was possible to separate anatomy from the measurement error of each instrument, so that similar curvature values could be obtained (p < 0.05) independent of the specific laser scanner. / The full text was made available at the end of the publisher's embargo: 31st March 2016

The causes of errors in the angle of impact calculation were investigated including the surface type, falling velocity and the method used to fit an ellipse to a bloodstain. As had been cited previously the angle of impact was generally underestimated, especially at acute angles and the reason for this was determined to be due to an overestimation of the length of a bloodstain. The surface type was found to significantly affect the accuracy of an angle of impact calculation and as the falling velocity increased, the angle of impact calculation became more accurate. High-speed photography was used to further investigate the formation of bloodstains on surfaces. It was found that the formation of the bloodstain varied depending on the surface type and the angle of the surface. Bloodstain pattern analysis involves the application of scientific techniques to reconstruct events that resulted in a bloodstain pattern. The position of the blood source in three-dimensional space is a fundamental element of this application. Currently little is known about the methods used by bloodstain pattern analysts to select bloodstains when determining the region of origin. Fourteen analysts worldwide were surveyed in order to ascertain this information. It was found that the methods used were variable and were often not based on scientific research. Research was therefore undertaken into bloodstain selection and in particular, which bloodstains should be selected for a region of origin analysis. As a result of these experiments, two sets of selection criteria were established, one for use when the region of origin is being calculated manually and one for when directional analysis is being used.

L’objectif de la présente étude est d’étudier les différences entre les homicides par strangulation et les suicides par pendaison ainsi que l’importance du rôle que jouent les lésions dans la détermination du mode de décès dans les cas apparents de pendaison, et ce dans l’optique d’établir un outil permettant de renseigner le coroner ou médecin légiste sur le mode de décès probable dans les cas apparents de pendaison. Deux cent quatorze cas de suicide par pendaison ont été révisés rétrospectivement et comparés à 51 cas d’homicide par strangulation. La fréquence d’ecchymoses (6,1 %), d’abrasions (4,7 %) et de lacérations (0,5 %) était significativement plus faible chez les victimes de suicide par pendaison que chez les victimes d’homicides par strangulation (58,8 %, 51,0 % et 5,9 % respectivement). Les ecchymoses, chez les victimes de suicide par pendaison, se trouvent habituellement sur les membres supérieurs antérieurs et postérieurs ou sur les membres inférieurs antérieurs. Elles se situent généralement soit sur les membres supérieurs, soit sur les membres inférieurs, et non aux deux endroits à la fois. Les abrasions sont davantage susceptibles de se trouver sur la face postérieure des membres supérieurs et sur la face antérieure des membres inférieurs. Cette concentration préférentielle n’est pas observée chez les victimes d’homicide par strangulation. De possibles critères de suspicion et des modèles de prédiction du mode de décès sont évalués. / The objective of the present study is to study the differences between the suicidal hangings and the homicidal nonhanging strangulations as well as the lesion’s role in the manner of death determination in apparent hanging cases, in order to create a decision tool that will inform the coroner or medical examiner on the probable manner of death in apparent hanging cases. Two hundred and fourteen cases of suicidal hanging were retrospectively reviewed and compared to 51 homicidal nonhanging strangulation victims. Bruises, abrasions and lacerations incidence were significantly lower in hanging victims (6.1 %, 4.7 % and 0.5 % respectively) compared to homicidal strangulation victims (58.8 %, 51.0% and 5.9 % respectively). Limb bruises were found as much on the anterior part of upper limbs as on posterior part, whereas limb abrasions were located mostly on the posterior aspect of upper limbs. Bruises and abrasions were also found exclusively on the anterior aspect of the lower limbs. Bruises are generally observed either exclusively on upper limbs, either exclusively on lower limbs, but rarely on both in a single case. In homicidal nonhanging strangulation cases, this preferential lesions concentration was not observed. Possible criteria for limb lesions distribution are discussed and prediction models of the manner of death are evaluated.

Justice, Crime, and Ethics, a leading textbook in criminal justice programs, examines ethical dilemmas pertaining to the administration of criminal justice and professional activities in the field. Comprehensive coverage is achieved through focus on law enforcement, legal practice, sentencing, corrections, research, crime control policy, and philosophical issues. The contributions in this book examine ethical dilemmas pertaining to the administration of criminal justice and professional activities in the field. / https://dc.etsu.edu/etsu_books/1069/thumbnail.jpg

This thesis examines how the first 10 seasons of CSI: Crime Scene Investigation (CBS, 2000–) engage with discourses on science. Investigating CSI’s representation of scientific practices and knowledge, it explicitly attempts to look beyond the generic assumption that forensic crime dramas simply ‘celebrate’ science. The material is analysed at three different levels, studying CSI’s wider cultural discursive context, genre linkages, and audio-visual form. In order to fully account for the series’ specificity, the thesis undertakes comparative analyses of earlier forensic crime dramas and other relevant audio-visual material. Close textual readings of certain thematic tropes, narrative devices and visual imagery in CSI are thus supplemented by historical studies of their extended generic backgrounds. This textual-historical approach generates a general argument that CSI dramatizes and evokes a number of different, and often contradictory, scientific ideas, perspectives and discursive shifts. The thesis concludes that CSI stages a transnational cultural forum, simultaneously engaging with residual, dominant and emergent discourses on science.  Throughout, close attention is paid to the multiple perspectives and viewpoints that allow the series to appeal to a wide and heterogeneous global audience. Furthermore, the thesis asserts that CSI specifically articulates a post-genomic structure of feeling, which begins to express the wider cultural implications of an emergent discursive shift whereby the instrumentalisation of molecular science seemingly offers more possibilities for human intervention into biological processes. Thus, the study demonstrates how CSI’s discourse on science treats recent scientific developments as engendering a cultural process of redefinition, questioning foundational concepts such as truth, identity, body, kinship and emotions.

The availability of DNA samples that are of adequate quality and quantity is essential for any genetic analysis. The fields of forensic biology and clinical diagnostic pathology testing often suffer from limited samples that yield insufficient DNA material to allow extensive analysis. This study examined the utility of a recently introduced whole genome amplification method termed Multiple Displacement Amplification (MDA) for amplifying a variety of limited sample types that are commonly encountered in the fields of forensic biology and clinical diagnostics. The MDA reaction, which employs the highly processive bacteriophage φ29 DNA polymerase, was found to generate high molecular weight template DNA suitable for a variety of downstream applications from low copy number DNA samples down to the single genome level. MDA of single cells yielded sufficient DNA for up to 20,000,000 PCR assays, allowing further confirmatory testing on samples of limited quantities or the archiving of precious DNA material for future work. The amplification of degraded DNA material using MDA identified a requirement for samples of sufficient quality to allow successful synthesis of product DNA templates. Furthermore, the utility of MDA products in comparative genomic hybridisation (CGH) assays identified the presence of amplification bias. However, this bias was overcome by introducing a novel modification to the MDA protocol. Future directions for this work include investigations into the utility of MDA products in short tandem repeat (STR) assays for human identifications and application of the modified MDA protocol for testing of single cell samples for genetic abnormalities.

This dissertation contextualises the forensic computing domain in terms of validation of tools and processes. It explores the current state of forensic computing comparing it to the traditional forensic sciences. The research then develops a classification system for the disciplines functions to establish the extensible base for which a validation system is developed. / Thesis (PhD)--University of South Australia, 2010

This dissertation contextualises the forensic computing domain in terms of validation of tools and processes. It explores the current state of forensic computing comparing it to the traditional forensic sciences. The research then develops a classification system for the disciplines functions to establish the extensible base for which a validation system is developed. / Thesis (PhD)--University of South Australia, 2010

The causes of errors in the angle of impact calculation were investigated including the surface type, falling velocity and the method used to fit an ellipse to a bloodstain. As had been cited previously the angle of impact was generally underestimated, especially at acute angles and the reason for this was determined to be due to an overestimation of the length of a bloodstain. The surface type was found to significantly affect the accuracy of an angle of impact calculation and as the falling velocity increased, the angle of impact calculation became more accurate. High-speed photography was used to further investigate the formation of bloodstains on surfaces. It was found that the formation of the bloodstain varied depending on the surface type and the angle of the surface. Bloodstain pattern analysis involves the application of scientific techniques to reconstruct events that resulted in a bloodstain pattern. The position of the blood source in three-dimensional space is a fundamental element of this application. Currently little is known about the methods used by bloodstain pattern analysts to select bloodstains when determining the region of origin. Fourteen analysts worldwide were surveyed in order to ascertain this information. It was found that the methods used were variable and were often not based on scientific research. Research was therefore undertaken into bloodstain selection and in particular, which bloodstains should be selected for a region of origin analysis. As a result of these experiments, two sets of selection criteria were established, one for use when the region of origin is being calculated manually and one for when directional analysis is being used.

The manner in which remains decompose has been and is currently being researched around the world, yet little is still known about the generated scent of death. In fact, it was not until the Casey Anthony trial that research on the odor released from decomposing remains, and the compounds that it is comprised of, was brought to light. The Anthony trial marked the first admission of human decomposition odor as forensic evidence into the court of law; however, it was not “ready for prime time” as the scientific research on the scent of death is still in its infancy. This research employed the use of solid-phase microextraction (SPME) with gas chromatography-mass spectrometry (GC-MS) to identify the volatile organic compounds (VOCs) released from decomposing remains and to assess the impact that different environmental conditions had on the scent of death. Using human cadaver analogues, it was discovered that the environment in which the remains were exposed to dramatically affected the odors released by either modifying the compounds that it was comprised of or by enhancing/hindering the amount that was liberated. In addition, the VOCs released during the different stages of the decomposition process for both human remains and analogues were evaluated. Statistical analysis showed correlations between the stage of decay and the VOCs generated, such that each phase of decomposition was distinguishable based upon the type and abundance of compounds that comprised the odor. This study has provided new insight into the scent of death and the factors that can dramatically affect it, specifically, frozen, aquatic, and soil environments. Moreover, the results revealed that different stages of decomposition were distinguishable based upon the type and total mass of each compound present. Thus, based upon these findings, it is suggested that the training aids that are employed for human remains detection (HRD) canines should 1) be characteristic of remains that have undergone decomposition in different environmental settings, and 2) represent each stage of decay, to ensure that the HRD canines have been trained to the various odors that they are likely to encounter in an operational situation.