Non-covalent interactions including nucleobase hydrogen bonding and ionic aggregation were studied in block and end-functional polymers synthesized via living polymerization techniques such as nitroxide mediated polymerization and anionic polymerization. The influence of non-covalent association on the structure/property relationships of these materials were studied in terms of physical properties (tensile, DMA, rheology) as well as morphological studies (AFM, SAXS). Hydrogen bonding, a dynamic interaction with intermediate enthalpies (10-40 kJ/mol) was introduced through complementary heterocyclic DNA nucleobases such as adenine, thymine and uracil. Hydrogen bonding uracil end-functionalized polystyrenes and poly(alkyl acrylate)s were synthesized via nitroxide mediated polymerization from novel uracil-functionalized alkoxyamine unimolecular initiators. Terminal functionalization of poly(alkyl acrylate)s with hydrogen bonding groups increased the melt viscosity, and as expected, the viscosity approached that of nonfunctional analogs as temperature increased. A novel difunctional alkoxyamine, DEPN2, was synthesized and utilized as an efficient initiator in nitroxide-mediated controlled radical polymerization of triblock copolymers. Complementary hydrogen bonding triblock copolymers containing adenine (A) and thymine (T) nucleobase-functionalized outer blocks were synthesized. Hydrogen bonding interactions were observed for blends of the complementary nucleobase-functionalized block copolymers in terms of increased specific viscosity as well as higher scaling exponents for viscosity with solution concentration. Multiple hydrogen bonding interactions were utilized to attach nucleobase-functional quaternary phosphonium ionic guests to complementary adenine-functionalized triblock copolymers. Ionic interactions, which possess stronger interaction energies than hydrogen bonds (~150 kJ/mol) were studied in the context of sulfonated poly(styrene-b-ethylene-co-propylene-b-styrene) block copolymers. Strong ionic interactions resulted in the development of a microphase separated physical network and greater extents for the rubbery plateau in DMA analysis compared to sulfonic acid groups, which exhibit weak hydrogen bonnding interactions. In contrast to the physical networks consisting of sulfonated or hydrogen bonding block copolymers, covalent networks were synthesized using carbon-Michael addition chemistry of acetoacetate functionalized telechelic oligomers to diacrylate Michael acceptors. The thermomechanical properties of the networks based on poly(propylene glycol) oligomers were analyzed with respect to the molecular weight between crosslink points (Mc) and the critical molecular weight for entanglement (Me). / Ph. D.

It is estimated that there are 5x1030 microorganisms on Earth and that approximately 50% live in unconsolidated sediment on the terrestrial subsurface. Subsurface disturbances caused by the constant search for natural resources and our dependence on groundwater make the abundance and diversity of these organisms a global concern. It is vital to many environmental fields, including bioremediation, water purification, and contaminant transport, that we understand how microorganisms and other colloidal particles attach to and detach from natural sediments and ultimately how they travel through porous media. Sticking efficiency (alpha) is a major component of most particle transport theories. It is defined as the ratio of particles that adhere to a collector surface compared to the total number of particles that collide with that surface. In this study, the Interaction Force Boundary Layer (IFBL) model was used to determine the sticking efficiencies of inorganic colloidal particles and Enterococcus faecalis cells against a silica glass collector surface. Sticking efficiencies were derived from intersurface potential energies that were determined from integrated force-distance data measured by Atomic Force Microscopy (AFM). Force data were measured in buffered aqueous solutions of varying pH and ionic strength to determine the influence of solution chemistry on particle removal from solution. Zeta-potentials were measured to determine the impact of particle and collector surface charge on force measurements. The results of this study indicate that alpha is strongly influenced by solution chemistry. The response of alpha to small changes in solution pH and ionic strength may be several orders of magnitude. Zeta-potential measurements imply that sticking efficiencies are strongly influenced by the electrical charges on both the particle and collector surfaces. Zeta-potentials of bacteria did not vary significantly with changing solution pH, but did respond to changing solution ionic strength. Historically, alpha has been very difficult to predict. This study is the first to report sticking efficiencies measured using AFM and the first to successfully apply the IFBL model to colloidal particles. Æ nThe incorporation of empirical nanoscale interactions into the measurement of alpha promises to more successfully describe particle adhesion and, thus, particle transport. / Ph. D.

The self-assembly blends of cellulose propionate (CP) and fluorine (F)-containing cellulose derivatives was examined on a model system of solvent cast films. The F-containing derivatives were either high molecular weight statistical cellulose esters with a number of F-containing substituent evenly distributed along the backbone (F-esters), or F-terminated CP-segments with exactly one F-containing endgroup. The F-esters were synthesized in a homogeneous phase and identified by 19F-NMR. Thermal analysis showed improved thermal stability of the F-esters when compared to F-free derivatives. 1-monohydroxy functionalized CP-segments were synthesized by HBr depolymerization using either a commercially available CP with residual OH-groups or a perpropionylated CP (CTP). The hydrolysis using the commercial CP yielded only segments of a minimum DP of 50 and the Mark-Houwink constant declined from 1 to 0.6. The results indicate that in the presence of free hydroxyls branches are formed by transglycosidation. The hydrolysis from perpropionylated CP resulted in segments with a minimum DP of 7, which is in accordance to previous studies. F-terminated CP segments were synthesized by coupling of the appropriate F-containing alcohol to the CP segment via toluene diisocyanate. Solutions containing F-terminated CP-segments showed typical critical micelle behavior. The critical micelle concentration depended on the molecular weight of the CP segment and the type of F-containing endgroup. The micelles are thought to consist of a core of the F-endgroups and a corona made-up of CP. Films containing the oligomers cast from micellar solution revealed a linear decrease in wetting force according to the blend composition of the oligomer, i.e. behavior according to the rule of mixing. This indicated the absence of surface segregation of the F-endgroup and it is explained with the fact that the micellar structure is retained in the solid state, suppressing surface segregation. The solid state micelles were visualized as dome-like protrusions by height image atomic force microscopy. In systems blended with CP the distance between the protrusions was found to increase with increasing CP content which was explained by a dilution process. Films containing F-esters were characterized by wetting force measurements and x-ray photoelectron spectroscopy (XPS). The wetting force decreased dramatically at low blend content of the F-ester and at the same time an F surface-concentration higher then expected from the blend composition was found by XPS. This indicated self-assembly by surface segregation of the F-containing species during film formation. The extent of surface segregation was found to depend on the type of the F-ester group as well as on the blend concentration of the F-ester. Dynamic wetting force measurements revealed hysteresis in films containing either F-esters or F-terminated CP segments. The hysteresis was found to be both kinetic (water sorption and reorganization) and thermodynamic (surface roughness and surface coverage with F-moieties) in nature. Consecutive force loops revealed an increase in the wetting force (advancing and receding) with increasing loop number, indicating the increased hydrophobicity of the surface. The force increase was determined to be due to water sorption as well as due to surface reorganization. An increase in the size of the F-groups signified a decrease in reorganization rate due to a decreased mobility of the group. The process of reorganization was fully reversible, a behavior which is congruent with the definition of smart behavior. / Ph. D.

Chapter 1 Dynamic Processes Occurring at the Cr^III_aq – Manganite (γ-MnOOH) Interface: Simultaneous Adsorption, Microprecipitation, Oxidation/Reduction and Dissolution The complex interaction between Cr^III_aq and manganite (γ-MnOOH) was systematically studied at room temperature over a pH range of 3 to 6, and within a concentration range of 10⁻⁴ to 10⁻² M CrOH²⁺_aq. Solution compositional changes during batch reactions were characterized by ICP and UVvis. The manganites were characterized before and after reaction with XPS, SEM, high-resolution FESEM, and EDS analysis. Fluid-cell AFM was used to follow these metal-mineral interactions in situ. The reactions are characterized by 1) sorption of Cr^III and the surface-catalyzed microprecipitation of Cr^III-hydroxy hydrate on manganite surfaces, 2) the acidic dissolution of the manganite, and 3) the simultaneous reductive dissolution of manganite coupled with the oxidation of Cr^III_aq to highly toxic Cr^VI_aq. Cr^III-hydroxy hydrate was shown to precipitate on the manganite surface while still undersaturated in bulk solution. The rate of manganite dissolution increased with decreasing pH due both to faster acid-promoted and Mn-reduction- promoted dissolution. Due to direct redox coupling with Mn reduction, Cr oxidation was most rapid in the lower pH range. Neither Mn^II nor Cr^VI were ever detected on manganite surfaces, even at the maximum rate of their generation. At the highest pHs of this study, Cr^III_aq was effectively removed from solution to form Cr^III-hydroxy hydrate on manganite surfaces and in the bulk solution, and manganite dissolution and Cr^VI_aq generation were minimized. All interface reactions described above were heterogeneous across the manganite surfaces. This heterogeneity is a direct result of the heterogeneous semiconducting nature of natural manganite crystals, and is also an expression of the proximity effect, whereby redox processes on semiconducting surfaces are not limited to next nearest neighbor sites. Chapter 2 Comparison of the Reactivity of Various Mn-Oxides with Cr^III_aq: Microscopic and Spectroscopic Observations of Dissolution, Cr-sorption and Cr and Mn Redox Interactions The interaction between Cr^III_aq and seven different Mn-oxides (6 monomineralic, 1 synthetic) have been observed in pH ~4.4 HNO₃ and pH ~4.4 ~10⁴ M Cr^III_aq solutions. For each mineral-solution interaction, the aqueous chemical concentrations (e.g. [Mn]_aq, [Cr]_aq, [Cr^VI_aq]) were measured with time. Reacted samples were examined by XPS to determine if, and to what extent, the surface chemical states of Cr, Mn and O had changed. Microscopic observations of the reacted surfaces were obtained using AFM and high-resolution, low-voltage FESEM. The solubility of the Mn-oxides in the acidic, non-Cr bearing solutions varied inversely with the average Mn valence, but did not show systematic behavior with respect to the mineral structure type (e.g. tunnel, layer, framework). This trend was interpreted as resulting from the relative ability of an adsorbed proton to polarize surface Mn-O bonds, with the polarizability being in the order Mn²⁺-O > Mn³⁺-O > Mn⁴⁺-O. For samples reacted with Cr^III_aq, the rate and extent of reductive dissolution was always greater than for acidic dissolution during the initial time period. The measured ratios of the [Mn]_aq : [Cr^VI]_aq were approximately in agreement with the values expected from the proposed stoichiometric reactions. Cr-uptake was observed to occur in undersaturated solutions as a result of adsorption, absorption and surface catalyzed precipitation. The chromium as detected by XPS was predominately Cr^III, however pyrolusite contained both Cr^III and Cr^VI. Previous studies have implicated a chromium surface precipitate to be responsible for the cessation of the Cr^III_aq oxidation reaction. Our surface sensitive FESEM and AFM observations tend to suggest that Cr-uptake is by isolated site binding, very small (<30 nm) surface clusters or monolayer scale films. Cr-uptake was followed by slow Cr-release on several of the solids (particularly the layered solids) after a substantial portion of the total aqueous Cr had been converted to Cr^VI_aq. The oxidizing ability of the different Mn-oxides for Cr^III_aq is evaluated with regards to the energy level of the redox couple (i.e. the redox potential) as compared with the Fermi energy level of the Mn-oxide. Although these energies were calculated rather than directly measured, the results indicate that electrons originating from adsorbed Cr^III ions may be transferred into the conduction band or more likely, into available surface states. The presence of an initial limited quantity of electron accepting surface states likely explains the observation of a rapid initial Cr^III-oxidation followed by much slower oxidation. The Mn-oxides that exhibited the greatest and longest lasting Cr^III-oxidizing power were the Mn-oxides containing Mn⁺, and in particular those containing Mn³⁺ and Mn⁺. It is believed that the combined presence of a reducible Mn ion (e.g. Mn³⁺) and a highly soluble Mn⁺ ion facilitates a sustained Cr^III-oxidation reaction because fresh surface is exposed during the reaction. / Ph. D.

The forces of interaction were measured between the siderophore azotobactin and the minerals goethite (FeOOH) and diaspore (AlOOH) in solution using force microscopy. Azotobactin was covalently linked to a hydrazide terminated atomic force microscope tip using a standard protein coupling technique. Upon contact with each mineral surface, the adhesion force between azotobactin and goethite was two to three times the value observed for the isostructural Al-equivalent diaspore. The affinity for the solid iron oxide surface reflected in the force measurements correlates with the specificity of azotobactin for aqueous ferric iron. Further, the adhesion force between azotobactin and goethite significantly decreases when small amounts of soluble iron are added to the system suggesting a significant specific interaction between the azotobactin and the mineral surface. Changes in the force signature with pH and ionic strength were fairly predictable when considering mineral solubility, the charge character of the mineral surfaces, the molecular structure of azotobactin, and the intervening solution. Molecular and quantum mechanical calculations which were completed to further investigate the interaction between azotobactin and iron/aluminum oxide surfaces, and to more fully understand the force measurements, also showed an increased force affinity for Fe over Al. Ab initio calculations on siderophore fragment analogs suggest the iron affinity can be attributed to increased electron density associated with the Fe-O bond compared to the Al-O bond; an observation that correlates with iron's larger electronegativity compared to aluminum. Attachment of the ligand to each surface was directed by steric forces within the molecule and coulombic interactions between the siderophore oxygens and the metals in the mineral. Chelating ligand pairs coordinated with neighboring metal atoms in a bidentate, binuclear geometry. Upon simulated retraction of azotobactin from each surface, the Fe-O(siderophore) bonds persisted into a higher force regime than Al-O(siderophore) bonds, and surface metals were removed from both minerals. Extrapolation of the model to more realistic hydrated conditions using a PCM model in the quantum mechanical calculations and water clusters in the molecular mechanical model demonstrated that the presence of water energetically favors and enhances metal extraction, making this a real possibility in a natural system. / Ph. D.

This study examined several features of flexible polyurethane foams from a structure-property perspective. A major part of this dissertation addresses the issue of connectivity of the urea phase and its influence on mechanical and viscoelastic properties of flexible polyurethane foams and their plaque counterparts. Lithium salts (LiCl and LiBr) were used as additives to systematically alter the phase separation behavior, and hence the connectivity of the urea phase at different scale lengths. Macro connectivity, or the association of the large scale urea rich aggregates typically observed in flexible polyurethane foams was assessed using SAXS, TEM, and AFM. These techniques showed that including a lithium salt in the foam formulation suppressed the formation of the urea aggregates and thus led to a loss in the macro level connectivity of the urea phase. WAXS and FTIR were used to demonstrate that addition of LiCl or LiBr systematically disrupted the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of micro level connectivity or the regularity in segmental packing of the urea phase. Based on these observations, the interaction of the lithium salt was thought to predominantly occur with the urea hard segments, and this hypothesis was confirmed using quantum mechanical calculations. Another feature of this research investigated model trisegmented polyurethanes based on monofunctional polyols, or "monols", with water-extended toluene diisocyanate (TDI) based hard segments. The formulations of the monol materials were maintained similar to those of flexible polyurethane foams with the exceptions that the conventional polyol was substituted by an oligomeric monofunctional polyether of ca. 1000 g/mol molecular weight. Plaques formed from these model systems were shown to be solid materials even at their relatively low molecular weights of 3000 g/mol and less. AFM phase images, for the first time, revealed the ability of the hard segments to self-assemble and form lath-like percolated structures, resulting in solid plaques, even though the overall volume of the system was known to be dominated by the two terminal liquid-like polyether segments. In another aspect of this research, foams were investigated in which the ratios of the 2,4 and 2,6 TDI isomers were varied. The three commercially available TDI mixtures, i.e., 65:35 2,4/2,6 TDI, 80:20 2,4/2,6 TDI, and 100:0 2,4/2,6 TDI were used. These foams were shown to display marked differences in their cellular structure (SEM), urea aggregation behavior (TEM), and in the hydrogen bonding characteristics of the hard segments (FTIR). Finally, the nanoscale morphology of a series of 'model' segmented polyurethane elastomers, based on 1,4-butanediol extended piperazine based hard segments and poly(tetramethylene oxide) soft segments, was also investigated using AFM. The monodisperse hard segments of these 'model' polyurethanes contained precisely either one, two, three, or four repeating units. Not only did AFM image the microphase separated morphology of these polyurethanes, but it also revealed that the hard domains preferentially oriented with their long axis along the radial direction of the spherulites which they formed. / Ph. D.

This thesis presents work done investigating methods for constructing patterns on the nanometer scale. Various methods of nanolithography using atomic force microscopes (AFMs) are investigated. The use of AFMs beyond their imaging capabilities is demonstrated in various experiments involving nanografting and surface electrochemical modification. The use of an AFM to manipulate a monolayer of thiols deposited on a gold substrate via nanografting is shown in our work to enable chemical modification of the surface of the substrate by varying the composition of the monolayer deposited on it. This leads to the selective deposition of various polymers on the patterned areas. Conditions for enhancing the selective deposition of the self-assembled polymers are studied. Such conditions include the types of polymers used and the pH of the polyelectrolyte solutions used for polymer deposition. Another method of nanolithography is investigated which involves the electrochemical modification of a monolayer of silanes deposited on a silicon substrate. By applying a potential difference and maintaining the humidity of the ambient environment at a certain level we manage to change the chemical properties of select areas of the silane monolayer and thus manage to establish selective deposition of polymers and gold nanoparticles on the patterned areas. Parameters involved in the patterning process using surface electrochemical modification, such as humidity levels, are investigated. The techniques established are then used to construct circuit elements such as wires. / Ph. D.

We developed a quantitative measurement technique using atomic force microscopy (AFM) to study the effects of both DC and AC external electric fields on the forces between two dielectric microspheres. In this work we measured the DC and AC electric field-induced forces and adhesion force between two barium titanate (BaTiO?) glass microspheres in a low humidity environment by this technique. The objective here is to find out the correlation between these measured forces and applied field strength, frequency, and the separation distance between the two spheres was studied. Since the spheres would oscillate under an AC field, the AC field-induced force was divided into dynamic component (i.e., time-varying term) and static component (i.e., time-averaged term) to investigate. The oscillatory response occurs at a frequency that is twice the drive frequency since the field-induced force is theoretically proportional to the square of the applied field. This behavior can be observed in the fast Fourier transformation (FFT) spectra of the time series of the deflection signal. The magnitude of the vibration response increases when the frequency of the drive force is near resonant frequency of the particle-cantilever probe. The amplitude of this vibration increases with proximity of the two particles, and ultimately causes the particles to repeatedly hit each other as in tapping mode AFM. The effect of the Maxwell-Wagner interfacial relaxation on the DC electric field-induced force was discovered by monitoring the variation of the field-induced force with time. The static component of the AC electric field-induced force does not vary with the applied frequency in the range from 1 to 100 kHz, suggesting that the crossover frequency may equal to or less than 1 kHz and the permittivities of the BaTiO? glass microspheres and medium dominate the field-3 induced force. The AC field-induced force is proportional to the square of the applied electric field strength. This relationship persists even when the separation between the spheres is much smaller than the diameter of the microspheres. The large magnitude of the force at small separations suggests that the local field is distorted by the presence of a second particle, and the continued dependence on the square of the field but the measured force is much larger than the theoretical results, suggesting that the local electric field around the closely spaced spheres is distorted and enhanced but the effects of the local field distortion may have not much to with the applied electric field. Compared with the calculated results from different models, our results demonstrate that the field-induced force is much more long-range than expected in theory. In addition, the DC field-induced adhesion force is larger than the AC field-induced one due to the interfacial charge accumulation, agreeing with the discovery of the Maxwell-Wagner interfacial relaxation effect on the DC field-induced force. No obvious correlation between the field-induced adhesion and the applied frequency is found. However, both the DC and AC field-induced adhesion forces display the linearity with the square of the applied electric field strength as well. / Master of Science

Yes / Polysialic acid (PolySia) is an important carbohydrate bio-polymer that is commonly over-expressed on tumours of neuroendocrine origin and plays a key role in tumour progression. PolySia exclusively decorates the neural cell adhesion molecule (NCAM) on tumour cell membranes, modulating cell-cell interactions, motility and invasion. In this preliminary study, we examine the nano-mechanical properties of isogenic C6 rat glioma cells - transfected cells engineered to express the enzyme polysialyltransferase ST8SiaII, which synthesises polySia (C6-STX cells) and wild type cells (C6-WT). We demonstrate that polySia expression leads to reduced elastic and adhesive properties but also more visco-elastic compared to non-expressing wild type cells. Whilst differences in cell elasticity between healthy and cancer cells is regularly assigned to changes in the cytoskeleton, we show that in this model system the change in properties at the nano-level is due to the polySia on the transfected cell membrane surface.

Yes / Tattooing has long been practised in various societies all around the world and is becoming increasingly common and widespread in the West. Tattoo ink suspensions unquestionably contain pigments composed of nanoparticles, i.e., particles of sub-100 nm dimensions. It is widely acknowledged that nanoparticles have higher levels of chemical activity than their larger particle equivalents. However, assessment of the toxicity of tattoo inks has been the subject of little research and ink manufacturers are not obliged to disclose the exact composition of their products. This study examines tattoo ink particles in two fundamental skin components at the nanometre level. We use atomic force microscopy and light microscopy to examine cryosections of tattooed skin, exploring the collagen fibril networks in the dermis that contain ink nanoparticles. Further, we culture fibroblasts in diluted tattoo ink to explore both the immediate impact of ink pigment on cell viability and also to observe the interaction between particles and the cells.