31 |
Systematic study of amyloid beta peptide conformations: Implications for alzheimer's diseaseJimenez, Jeffy Pilar 01 June 2005 (has links)
The amyloid beta peptide particularly the 40 and 42 amino acid residues are the responsible for plaque formation in Alzheimer's disease (AD) patients. Extra cellular plaque formation has been recognized after incessant investigations along with the formation of intracellular tau protein tangles as the hallmarks of AD. Furthermore, the plaque formation has been linked mostly as a cause of the disease and the tangles mostly as a consequence. Our investigation is focused on studying the formation of AD plaques. The amyloid beta (A[beta]) is a physiological peptide secreted from neurons under normal conditions, along with other soluble forms cleaved from the amyloid precursor protein (APP). These soluble forms of APP have neuroprotective and neurotrophic functions, while the A[beta] is considered an unwanted by-product of the APP processing.
Under normal conditions there is an anabolic/catabolic equilibrium of the A[beta] peptide; therefore, it is believed that the formation of the plaque does not take place. On the other hand, the neurons' surface may play an important role in the adhesion mechanisms of the A[beta] peptide. Our experiments show that the neuron surfaces along with the media conditions may be the most important causes for progressive formation of plaques. We have incubated rigid supports (mica) and soft biomimetic substrates (lipid bilayers on top of a PEG cushion layer drafted onto a silica surface) with the three different conformations of the A[beta] peptide (monomeric, oligomeric and fibrils structures) to determine the adhesion mechanisms associated with in situ plaque formation. The soft biomimetic substrates have been assembled first by depositing and activating a thin film of silica (i.e., to create surface silanol groups).
This film is then reacted with polyethylene glycol (PEG), which is a biocompatible polymer, to create a cushion-like layer that supports and allows the lipid bilayer to have high mobility. A lipid bilayer is then deposited on this soft support to reproduce a cell membrane using the Langmuir Blodgett deposition technique. The characterization of such biomimetic membranes has been studied by using Atomic Force Microscopy (AFM) in liquid environments. Our results show that these lipid bilayers are highly mobile. Additionally the structure and topography characteristics of the A[beta] conformations have been followed with atomic force microscopy (AFM). The kinetics and rates of adhesion have been measured with attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Our results show the progress of the plaques' formation with time where simple monomers deposit on the substrates and allow the development of oligomeric species.
|
32 |
Catalisadores de Pt e PtSn suportados em biocarvões ativados para a eletro-oxidação do etanolSilva, Elen Almeida Leal da January 2016 (has links)
As células a combustível de etanol direto (DEFCs, Direct Ethanol Fuel Cells) são baseadas na eletro-oxidação do etanol à baixa temperatura e necessitam catalisadores à base de metais nobres, devido à cinética mais lenta para as reações de oxi-redução. Entre os catalisadores, a platina e as ligas de platina são os mais utilizados. Materiais para suportar os catalisadores são necessários a fim de reduzir a carga do mesmo empregada. Um dos suportes de catalisadores mais versáteis é o carvão ativado, e um dos mais utilizados tem sido o carvão mineral Vulcan. Recentemente, estudos têm sido realizados sobre a madeira como material precursor de carvão ativado, devido à sua sustentabilidade e também porque os materiais carbonosos obtidos têm excelentes propriedades finais. No presente trabalho, estudou-se a reação de eletro-oxidação do etanol, de catalisadores à base de Pt e PtSn suportados em biocarvões obtidos a partir da madeira Eucalyptus grandis. No início desse trabalho não havia relatos na literatura sobre o uso de carvões ativados obtidos a partir de madeira de Eucalyptus grandis como precursor. Foram utilizados dois métodos de ativação nos suportes, ativação física com CO2 e ativação química com ZnCl2. Os suportes de catalisadores foram caracterizados por análise textural, análise elementar, análise termogravimétrica e por espectroscopia de infravermelho. As técnicas empregadas para a caracterização dos catalisadores foram espectrometria de retroespalhamento de Rutherford (RBS), difração de raios-X (DRX), análise termogravimétrica (TGA), microscopia eletrônica de transmissão (MET), voltametria cíclica (VC) e caracterização espectroeletroquímica (ATR-FTIR in-situ). Os biocarvões apresentaram áreas superficiais maiores e tamanhos de poros menores do que o carvão Vulcan, independente do tratamento. A natureza do suporte influenciou nas características morfológicas dos eletrocatalisadores preparados. Com base nos resultados obtidos os catalisadores suportados nos suportes com ativação química apresentaram os melhores resultados de densidade de corrente para eletro-oxidação do etanol, com exceção do catalisador PtSn suportado no biocarvão ativado fisicamente (PtSn/BCAF). Pode-se dizer que os biocarvões são adequados para aplicações em células de combustível, podendo substituir o uso de suportes baseados em carvões minerais. A eletro-oxidação do etanol nos eletrocataliadores de PtSn nos carvões ativados ocorre principalmente através da produção de acetaldeído e ácido acético. / Direct ethanol fuel cells (DEFC) are based on ethanol electrooxidation at low-temperature and they require noble metal based catalysts, due to the slower kinetic of redox reactions. Among the catalysts, platinum and its alloys have been the most widely used. Catalysts support materials have been employed with the intent to reduce loading catalyst. One of the most versatile catalyst supports is activated carbon, and one of the most widely used is the Vulcan®, a mineral carbon. Currently, different studies have been conducted concerning wood as activated carbon precursor, because of its sustainability and its properties, like suitable porous texture, surface area and surface chemistry. In this work, it was studied ethanol electrooxidation reaction on Pt and PSn catalysts supported on biocarbon. Biocarbons were obtained from Eucalyptus grandis. Literature reports the use of carbon materials as catalyst support, however focused on carbon fibers and carbon nanotubes, without any precedent on the use of activated carbon obtained from Eucalyptus grandis until the start of this work. The carbon supports were obtained by physical activation using CO2, and chemical activation with ZnCl2. Catalyst support characterization boarded elemental analysis, texture analysis, thermogravimetric analysis and infrared spectroscopy. Techniques employed for the catalyst characterization were Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), cyclic voltammetry (CV) and spectroelectrochemical characterization (ATR-FTIR in situ). Biocarbons presended the higher surface areas and smallest pore size than the Vulcan ones, independent of the treatment. The support nature influenced on the catalyst morphology. Results showed that the catalyst on the chemically activated supports presented the best current density for ethanol electro-oxidation, except for the PtSn on the physically activated biocarbon (PtSn/BCAF). Biocarbons resulted adequate for fuel cell applications and are capable of substituting the conventional supports based on mineral carbon. Ethanol electro-oxidation on PtSn catalysts takes place through the production of acetaldehyde and acetic acid reaction mechanism.
|
33 |
Utilização da espectroscopia com análise multivariada na identificação de diferentes DTUs do Trypanosoma cruzi em Triatoma brasiliensis infectados experimentalmenteJales, Jéssica Teixeira 16 February 2018 (has links)
Submitted by Automação e Estatística (sst@bczm.ufrn.br) on 2018-07-02T21:32:55Z
No. of bitstreams: 1
JessicaTeixeiraJales_DISSERT.pdf: 1910451 bytes, checksum: e7f1801b5eb5bf661f06cfbba7ef2fe1 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2018-07-09T11:25:48Z (GMT) No. of bitstreams: 1
JessicaTeixeiraJales_DISSERT.pdf: 1910451 bytes, checksum: e7f1801b5eb5bf661f06cfbba7ef2fe1 (MD5) / Made available in DSpace on 2018-07-09T11:25:49Z (GMT). No. of bitstreams: 1
JessicaTeixeiraJales_DISSERT.pdf: 1910451 bytes, checksum: e7f1801b5eb5bf661f06cfbba7ef2fe1 (MD5)
Previous issue date: 2018-02-16 / A infecção pelo Trypanosoma cruzi é um problema de saúde pública, e é importante que seu
diagnóstico seja realizado com rapidez e eficiência. Entretanto, as técnicas aplicadas para esse fim
apresentam baixa sensibilidade e especificidade no que concerne a vigilância entomológica e
epidemiológica do parasito. Pensando nesta problemática, a bioespectroscopia com análise
multivariada foi utilizada neste trabalho para avaliar a eficiência na identificação da infecção
experimental de Triatoma brasiliensis por diferentes Unidades de tipagem discreta (DTU) do T. cruzi.
Na padronização do modelo de classificação foram utilizadas ninfas de 4° e 5º estádio de T.
brasiliensis, infectadas experimentalmente com diferentes DTUs do parasito (TcI, TcII, TcIII ou
infecção mista), na concentração de 40.000 parasitos/mL de sangue. Seguidos 15 e 30 dias após
infecção (DAI), espectros de infravermelho foram coletados do abdômen de cada inseto; 30 DAI,
dejetos intestinais foram coletados e posteriormente utilizados para análise do kDNA. A padronização
do modelo de calibração mostrou que a aplicação do infravermelho médio utilizando o Infravermelho
médio com transformada de Fourrier com reflexão total atenuada (ATR-FTIR) discriminou os
triatomíneos não infectados e infectados com o T. cruzi. Além disso, a técnica foi capaz de distinguir
as DTUs utilizadas, e separar os 5 grupos estudados apenas com a análise exploratória de dados por
meio da aplicação da Análise dos componentes principais (PCA), a qual identificou diferencialmente
grupamentos proteicos, ácidos nucleicos e em menor proporção, lipídeos. A análise do kDNA
confirmou 92,5% das infecções, enquanto o ATR-FTIR identificou corretamente todas as amostras.
Desta forma, a bioespectroscopia foi eficiente, simples e acurada na identificação da infecção de T.
brasiliensis por T. cruzi, podendo ser utilizado como ferramenta de diagnóstico futura, auxiliando na
vigilância entomológica da infecção por este parasita. / The Trypanosoma cruzi infection is a public health problem and it is substancial that its
diagnosis be performed quickly and efficiently. However, the techniques applied on the diagnosis of
T. cruzi infection present low sensitivity and specificity regarding the entomological and
epidemiological surveillance of the parasite. Considering this problem, the biospectroscopy with the
use of ATR-FTIR was used in this study to evaluate its efficiency in the identification of the
experimental infection of Triatoma brasiliensis by different DTUs of T. cruzi. The standardization of
the calibration model included the use of fourth and fifth instars of T. brasiliensis, which were infected
with different DTUs of the parasite (TcI, TcII, TcIII or mixed infection) at a concentration of 40,000
parasites / ml of blood. Followed 15 and 30 days after infection (DAI), infrared spectra were collected
from the abdomen of each insect; 30 DAI, intestinal wastes were collected and later used for kDNA
analysis. The standardization of the calibration model showed that the application of the mild-infrared
using the ATR-FTIR distinguished the triatomines that were not infected and experimentally infected
with T. cruzi. In addition, the technique was able to identify the DTUs used, separating the 5 distinct
groups only with the exploratory data analysis through the application of Principal Component
Analysis (PCA), which differentially identified protein clusters, nucleic acids and to a lesser extent,
lipids. The kDNA analysis confirmed 92.5% of the infected insects, while the ATR-FTIR correctly
identified all samples. Thus, biospectroscopy applied with the use of ATR-FTIR was efficient in the
identification of the T. brasiliensis infection by T. cruzi, and could be used as a diagnostic tool for
the future, assisting in the entomological surveillance of the infection by this parasite.
|
34 |
Espectroscopia de infravermelho de cristalitos de surfactantes / Infrared spectroscopy of surfactant crystallitesRommel Bezerra Viana 25 April 2008 (has links)
O objetivo deste trabalho é estudar o nível de organização dos cristalitos de surfactantes aniônico, catiônico e zwiteriônico com o aumento na densidade destas moléculas sobre um cristal de germânio. As análises foram realizadas por espectroscopia de infravermelho com transformada de Fourier acoplada à técnica de reflexão total atenuada (FTIR-ATR). Este estudo apresenta importantes aspectos na organização do dodecilsulfato de sódio (SDS), do N-hexadecil-N,N-dimetil-3-amônio-1-propanosulfato (HPS), do brometo de hexadeciltrimetilamônio (CTAB) e do brometo de dodeciltrimetilamônio (DTAB). No SDS é observado um deslocamento de 1.7 cm-1 para valores de maior frequência na banda de estiramento assimétrico do CH2, vass (CH2), enquanto que é observado um deslocamento de 0.9 cm-1 na banda de estiramento simétrico, vsim (CH2). Este deslocamento para valores de maior frequência nas bandas de estiramento está associado com um aumento na desorganização da cadeia alifática com o aumento na densidade de moléculas sobre o elemento de ATR. A banda de deformação angular do CH2, δ(CH2), apresenta um valor em 1468 cm-1 que é também um indicativo de desorganização. No CTAB não é observado variações acentuadas nos valores das frequências vibracionais. Na banda vass (CH2) do DTAB é observado um deslocamento de 4.5 cm-1 para valores de menor frequência. Embora seja observado valores próximos de 2920 cm-1 para a banda vass (CH2), que é um indicativo do estado líquido de surfactantes, o que é observado nesse estudo são cristalitos de DTAB. O deslocamento da banda vsim (CH2) do DTAB é da ordem de 2 cm-1. Estas mudanças nas bandas vass (CH2) e vsim (CH2) são um indicativo da diminuição nas conformações gauche e um aumento nas conformações trans ao longo da cadeia alifática. O valor da freqüência em torno de 1472 cm-1 para a banda δ(CH2) é também um indicativo de uma maior organização na cadeia de CH2 do DTAB. Para o HPS é observado um deslocamento de 2.6 e 2.7 cm-1 para valores de maior frequência nas bandas vass (CH2) e vsim (CH2), respectivamente. A banda δ(CH2) do HPS apresenta um deslocamento de 4 cm-1 para valores de maior frequência. A variação nas bandas vass (CH2), vsim (CH2), e δ(CH2) ressalta o aumento na desorganização da cadeia alifática com o aumento na densidade de moléculas de HPS sobre o germânio. / The objective of this work is study the order level of anionic, cationic and zwitterionic surfactants with the increase of their density packing on the surface of a germanium element. The analyses were performed by a Fourier transform infrared-attenuated total reflection spectroscopy. This study shows important insights on the conformational order of sodium dodecyl sulfate (SDS), N-hexadecyl-N-N -dimethyl-3-ammonio-1-propane-sulfonate (HPS), hexadecyl-trimethylammonium bromide (CTAB) and dodecyl trimethylammonium bromide (DTAB). It is observed a shift of 1.7 and 0.9 cm-1 to higher frequency values of the CH2 asymmetric (vass (CH2)) and symmetric (vsim(CH2)) stretching bands for the SDS molecules, respectively. The latter shift to higher frequency values is associated with the disorder of the aliphatic chain due to the increase of density packing of SDS molecules on the germanium element. The CH2 scissoring band [δ (CH2)] shows a value in 1468 cm-1, which is also an indicative of conformational disorder. It is not observed any accentuated change on the vibrational frequency values of the CTAB molecules. The vass (CH2) band of the DTAB molecules is shifted 4.5 cm-1 to lower frequency values. Although it is observed values near 2920 cm-1 for the vass(CH2) band, indicating a surfactant liquid phase, it is shown in this study that there are indeed DTAB crystallites. The shift of DTAB vsim(CH2) band is around 2 cm-1. These changes in vass(CH2) and vsim(CH2) band are an indicative of a decrease in gauche conformations and an increase in all-trans conformations over the aliphatic chain. The frequency value around 1472 cm-1 for the δ(CH2) band is also an indicative of the order in CH2 chain of DTAB. It is observed a shift of 2.6 and 2.7 cm-1 to higher frequency values of vass (CH2) and vsim(CH2) bands of the HPS molecule, respectively. The δ(CH2) band of the HPS molecule presents a shift of 4 cm-1 to higher frequency values. These variations in vass (CH2), vsim(CH2), and δ(CH2) bands stand out the disorder of the aliphatic chain due to the increase of the density packing for the HPS molecules on the germanium surface.
|
35 |
Catalisadores de Pt e PtSn suportados em biocarvões ativados para a eletro-oxidação do etanolSilva, Elen Almeida Leal da January 2016 (has links)
As células a combustível de etanol direto (DEFCs, Direct Ethanol Fuel Cells) são baseadas na eletro-oxidação do etanol à baixa temperatura e necessitam catalisadores à base de metais nobres, devido à cinética mais lenta para as reações de oxi-redução. Entre os catalisadores, a platina e as ligas de platina são os mais utilizados. Materiais para suportar os catalisadores são necessários a fim de reduzir a carga do mesmo empregada. Um dos suportes de catalisadores mais versáteis é o carvão ativado, e um dos mais utilizados tem sido o carvão mineral Vulcan. Recentemente, estudos têm sido realizados sobre a madeira como material precursor de carvão ativado, devido à sua sustentabilidade e também porque os materiais carbonosos obtidos têm excelentes propriedades finais. No presente trabalho, estudou-se a reação de eletro-oxidação do etanol, de catalisadores à base de Pt e PtSn suportados em biocarvões obtidos a partir da madeira Eucalyptus grandis. No início desse trabalho não havia relatos na literatura sobre o uso de carvões ativados obtidos a partir de madeira de Eucalyptus grandis como precursor. Foram utilizados dois métodos de ativação nos suportes, ativação física com CO2 e ativação química com ZnCl2. Os suportes de catalisadores foram caracterizados por análise textural, análise elementar, análise termogravimétrica e por espectroscopia de infravermelho. As técnicas empregadas para a caracterização dos catalisadores foram espectrometria de retroespalhamento de Rutherford (RBS), difração de raios-X (DRX), análise termogravimétrica (TGA), microscopia eletrônica de transmissão (MET), voltametria cíclica (VC) e caracterização espectroeletroquímica (ATR-FTIR in-situ). Os biocarvões apresentaram áreas superficiais maiores e tamanhos de poros menores do que o carvão Vulcan, independente do tratamento. A natureza do suporte influenciou nas características morfológicas dos eletrocatalisadores preparados. Com base nos resultados obtidos os catalisadores suportados nos suportes com ativação química apresentaram os melhores resultados de densidade de corrente para eletro-oxidação do etanol, com exceção do catalisador PtSn suportado no biocarvão ativado fisicamente (PtSn/BCAF). Pode-se dizer que os biocarvões são adequados para aplicações em células de combustível, podendo substituir o uso de suportes baseados em carvões minerais. A eletro-oxidação do etanol nos eletrocataliadores de PtSn nos carvões ativados ocorre principalmente através da produção de acetaldeído e ácido acético. / Direct ethanol fuel cells (DEFC) are based on ethanol electrooxidation at low-temperature and they require noble metal based catalysts, due to the slower kinetic of redox reactions. Among the catalysts, platinum and its alloys have been the most widely used. Catalysts support materials have been employed with the intent to reduce loading catalyst. One of the most versatile catalyst supports is activated carbon, and one of the most widely used is the Vulcan®, a mineral carbon. Currently, different studies have been conducted concerning wood as activated carbon precursor, because of its sustainability and its properties, like suitable porous texture, surface area and surface chemistry. In this work, it was studied ethanol electrooxidation reaction on Pt and PSn catalysts supported on biocarbon. Biocarbons were obtained from Eucalyptus grandis. Literature reports the use of carbon materials as catalyst support, however focused on carbon fibers and carbon nanotubes, without any precedent on the use of activated carbon obtained from Eucalyptus grandis until the start of this work. The carbon supports were obtained by physical activation using CO2, and chemical activation with ZnCl2. Catalyst support characterization boarded elemental analysis, texture analysis, thermogravimetric analysis and infrared spectroscopy. Techniques employed for the catalyst characterization were Rutherford backscattering spectrometry (RBS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), cyclic voltammetry (CV) and spectroelectrochemical characterization (ATR-FTIR in situ). Biocarbons presended the higher surface areas and smallest pore size than the Vulcan ones, independent of the treatment. The support nature influenced on the catalyst morphology. Results showed that the catalyst on the chemically activated supports presented the best current density for ethanol electro-oxidation, except for the PtSn on the physically activated biocarbon (PtSn/BCAF). Biocarbons resulted adequate for fuel cell applications and are capable of substituting the conventional supports based on mineral carbon. Ethanol electro-oxidation on PtSn catalysts takes place through the production of acetaldehyde and acetic acid reaction mechanism.
|
36 |
Tunable Nano-Delivery System for Cancer Treatment: A New Approach for Targeted Localized Drug DeliveryFalahat, Rana 28 June 2016 (has links)
Localized drug delivery systems have been widely studied as potential replacements for conventional chemotherapy with the capability of providing sustained and controlled drug release in specific targeted sites. They offer numerous benefits over conventional chemotherapy such as enhancing the stability of embedded drugs and preserving their anticancer activity, providing sustained and controlled drug release in the tumor site, reducing toxicity and diminishing subsequent side effects, minimizing the drug loss, averting the need for frequent administrations, and minimizing the cost of therapy.
The aim of this study is to develop a localized drug delivery system with niosomes embedded in a chitosan hydrogel with targeting capabilities. The incorporation of niosomes into a chitosan hydrogel has several advantages over each individually being used. First, embedding niosomes in a chitosan hydrogel can yield control over drug release especially for small molecule drugs. Second, chitosan hydrogel may improve the release time and dosage of drugs from niosomes by protecting them with an extra barrier, resulting in tunable release rates. Third, as a localized delivery system, chitosan hydrogels can prevent the migration of niosomes away from the targeted tumor sites. Finally, chitosan has mucoadhesive property which can be used in the targeting of the tumor cells with the mucin over expression.
To enhance the specific targeting, the capacity of chitosan to target MUC1 overexpression in cancer cells will be analyzed. Similarly, the incorporation of chlorotoxin in this system will be achieved and evaluated. Chlorotoxin, a 36-amino acid peptide, is purified from Leiurus quinquestriatus scorpion venom with a distinct characteristic of binding preferentially to neuroectoderma tumors such as glioma, but not to normal tissue.
The overexpression of MUC1, a mucin antigen, in certain cancer cells has been used as an attractive therapeutic target in the design of a drug delivery system consisting of chitosan with a distinct mucoadhesive property. To determine the level of MUC1expression in different cell lines, Cell based Enzyme Linked Immunosorbent Assay (Cell ELISA) was developed for the first time.
Attenuated Total Reflectance- Fourier Transform Infra-Red (ATR-FTIR) Spectroscopy is used to investigate the possible molecular interaction between chlorotoxin and glioma cells. This study presents a new approach in monitoring the biochemical and biophysical changes in glioma cells after being exposed to CTX. In addition to characterizing the signature spectra of CTX and glioma cells, we evaluated the differences in biochemical compositions of the spectra of the glioma cells treated with and without CTX over different incubation time periods.
The results indicate that the proposed localized drug delivery system with the distinct tumor targeting features and extended release profiles would tune and control the specific delivery of chemotherapeutics in tumor sites.
|
37 |
Porovnání vlastností dvou výrobků pro umělá kluziště na bázi kaučuku etylén-propylen-dien / Properties comparison of two products used for skating rink based on ehtylene-propylene-dien rubberKostková, Jana January 2015 (has links)
This master thesis deals with characterization of two black and white products based on ethylene-propylene-diene rubber (EPDM) used for skating rink. Products marked with A and are different in their diameter of circular tubes trough which cooling medium passes and also in the distance of these tubes. Both of materials were characterized in order to determine whether it is the EPDM and how are they different. The characterization methods were used: differential scanning calorimetry, thermogravimetric analysis, attenuated total reflectance Fourier transform infrared spectroscopy, tensile test, swelling test, thermooxidative test. The composition of both materials, including fillers and others additives is almost the same but difference is in structure of EPDM and probably also in interaction with fillers, what exhibits different mechanical properties, thermooxidative stability and thermal capacity. These differences which have been found are essential for long-term use properties of both materials.
|
38 |
Structural Determination of Copolymers from the Cross-catalyzed Reactions of Phenol-formaldehyde and Polymeric Methylenediphenyl DiisocyanateHaupt, Robert A. 07 May 2013 (has links)
This work reports the elucidation of the structure of a copolymer generated by the cross- catalyzed reactions of PF and pMDI prepolymers. The electronic behavior of phenolic monomers as perturbed by alkali metal hydroxides in an aqueous environment was studied with 1H and 13C NMR. Changes in electronic structure and thus reactivity were related to solvated ionic radius, solvent dielectric constant, and their effect on ion generated electric field strength. NMR chemical shifts were used to predict order of reactivity for phenolic model compounds with phenyl isocyanate with good success. As predicted, 2-HMP hydroxymethyl groups were more reactive than 4-HMP in forming urethane bonds under neutral conditions and 2-HMP hydroxymethyl groups were more reactive than 4-HMP in forming urethane bonds under alkaline conditions.
The structure of the reaction products of phenol, benzyl alcohol, 2-HMP, and 4-HMP with phenyl isocyanate were studied using 1H and 13C NMR under neutral organic and aqueous alkaline conditions. Reactions in THF-d8 under neutral conditions, without catalyst, were relatively slow, resulting in residual monomer and the precipitation of 1,3-diphenyl urea from the carbamic acid reaction. The reactions of phenol, 2-HMP, and 4-HMP in the presence of TEA catalyst favored the formation of phenyl urethanes (PU). Reactions with benzyl alcohol, 2-HMP, and 4-HMP in the presence of DBTL catalyst favored the formation of benzyl urethanes (BU). Reactions of 2-HMP and 4-HMP led to formation of benzylphenyldiurethane (BPDU). DBTL catalysts favored formation of BDPU strictly by a benzyl urethane pathway, while TEA favored its formation mostly via phenyl urethane, although some BU was also present. Under aqueous alkaline conditions, 2-HMP was more reactive than 4-HMP, exhibiting an enhanced reactivity that was attributed to intramolecular hydrogen bonding and a resulting resonance stabilization of the phenolic aromatic ring.
ATR-FTIR spectroscopic studies generated real time structural information for model compound reactions of the cross-catalyzed system, differentiating among reaction peaks generated by the carbamic acid reaction, PU and BU formation. ATR-FTIR also permitted monitoring of propylene carbonate hydrolysis and accelerated alkaline PF resole condensation. ATR-FTIR data also showed that the overall reaction stoichiometry between the PF and pMDI components drove copolymer formation. Benzyl urethane formation predominated under balanced stoichiometric conditions in the presence of ammonium hydroxide, while phenyl urethane formation was favored in its absence. Accelerated phenolic methylene bridge formation became more important when the PF component was in excess in the presence of sufficient accelerator. A high percentage of free isocyanate was present in solid copolymer formed at ambient temperature. The combination of ammonium hydroxide and tin (II) chloride synergistically enhanced the reactivity of the materials, reducing the residual isocyanate.
From 13C CP/MAS NMR of the copolymer, the presence of ammonium hydroxide and tin (II) chloride and the higher PF concentration resulted in substantial urethane formation. Ammonium hydroxide favored formation of benzyl urethane from the 2-hydroxymethyl groups, while phenyl urethane formed in its absence. The low alkalinity PF resole with ammonium hydroxide favored benzyl urethane formation. Comparison of these results with the 13C NMR model compound reactions with phenyl isocyanate under alkaline conditions confirmed high and low alkalinity should favor phenyl and benzyl urethane formation respectively. These cross catalyzed systems are tunable by formulation for type of co-polymer linkages, reactivity, and cost. / Ph. D.
|
39 |
Framtagande av mätmetod för koncentration av fixativ i bakvatten : Undersökning om FTIR lämpar sig som analysmetod med processvatten för en mjukpapperstillverkningPaet, Laura January 2023 (has links)
Rexcell Tissue & Airlaid AB is a producer of paper products such as coloured tissue, where it is important to manufacture a product that does not release any colour during usage. To prevent colour bleeding, a fixative is added during the paper dyeing process. However, excessive fixative can cause issues to the papermaking process due to its charge. Currently, charge measurements on the water flow are used to detect fixative overdose, but a more precise method is desired. This study explores using FTIR spectroscopy and existing charge measurements (PCD and Z-potential) to analyse process water for different dye types (Red, Black, Green). The ATR-FTIR technique shows that fixative is detectable only at higher concentrations than present in the water. By reducing the process water to measurable fixative levels, concentration determination is possible using IR peaks associated with the amine bond. Comparing concentration values with charge values, a good agreement is observed for two dye types, but the green whitewater shows discrepancies. This could be due to the charged dye molecules influencing the fixative spectrum, affecting concentration determination. The study suggests using an ATR crystal allowing multiple reflections to enhance the fixative signal for accurate concentration measurement. Further investigation is needed to understand the impact of coloured molecules on fixative properties and the FTIR spectrum. In summary, it is feasible to determine fixative concentration in whitewater using FTIR-ATR, but refining the methodology is essential for reliable results
|
40 |
An in situ spectro-electrochemical study of aluminium/polymer interfaces : development of ATR-FTIR and its integration with EIS for corrosion studiesÖhman, Maria January 2006 (has links)
In order to extend the applications of aluminium, organic coatings may be applied on sheet materials, for instance for corrosion protection or aesthetic surface finish purposes in the automotive and construction industries, or on foil materials in the flexible packaging industry. The most common mechanisms for deterioration and structural failure of organically coated aluminium structures are triggered by exposures to the surrounding environment. Despite the great importance to elucidate the influence of exposure parameters on a buried aluminium/polymer interface, there is still a lack of knowledge regarding the mechanisms that destabilise the structure. It is generally believed that a detailed in situ analysis of the transport of corroding species to the buried interface, or of surface processes occurring therein, is most difficult to perform at relevant climatic and real-time conditions. In this work, Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR) in the Kretschmann-ATR configuration was successfully applied to in situ studies of the transport of water and ionic species through polymer films to the aluminium/polymer interface upon exposure to ultra pure deionised water and to a 1 M sodium thiocyanate (NaSCN) model electrolyte. Other main processes distinguished were the formation of corrosion products on the aluminium surface and swelling of the surface-near polymer network. Hence, in situ ATR-FTIR was capable to separate deterioration-related processes from each other. To perform more unambiguous interpretations, a spectro-electrochemical method was also developed for in situ studies of the buried aluminium/polymer interface by integrating the ATR-FTIR technique with a complementary acting technique, Electrical Impedance Spectroscopy (EIS). While transport of water and electrolyte through the polymer film to the aluminium/polymer interface and subsequent oxidation/corrosion of aluminium could be followed by ATR-FTIR, the protective properties of the polymer as well as of processes at the aluminium surface were simultaneously studied by EIS. The integrated set-up provided complementary information of the aluminium/polymer sample investigated, with ATR-FTIR being sensitive to the surface-near region and EIS being sensitive to the whole system. While oxidation/corrosion and delamination are difficult to distinguish by EIS, oxide formation could be confirmed by ATR-FTIR. Additionally, while delamination and polymer swelling may be difficult to separate with ATR-FTIR, EIS distinguished swelling of the polymer network and also identified ultimate failure as a result of delamination. The capability of the integrated ATR-FTIR / EIS in situ technique was explored by studying aluminium/polymer systems of varying characteristics. Differences in water and electrolyte ingress could be monitored, as well as metal corrosion, polymer swelling and delamination. / QC 20101124
|
Page generated in 0.0384 seconds