Lors d’un lancement spatial, le bruit des jets supersoniques chauds, générés par les moteurs-fusées au décollage et en interaction avec le pas de tir, est dommageable pour le lanceur et en particulier sa charge utile. Par conséquent, les acteurs du spatial cherchent à renforcer leur compréhension et leur maîtrise de cette ambiance acoustique, entre autres grâce à des méthodes et outils numériques. Toutefois, ils ne disposent pas d’une approche numérique globale capable de prendre en compte simultanément la génération fidèle du bruit, la propagation acoustique non-linéaire, les effets d’installation complexes et les géométries réalistes, pourtant inhérents aux applications spatiales. Dans cette optique, cette étude consiste à mettre en place et valider une méthodologie de simulation numérique par couplage fort Navier-Stokes − Euler, puis à l’appliquer à des cas réalistes de bruit de jet supersonique. L’objectif est d’affiner les capacités de prévision et de contribuer à la compréhension des mécanismes de génération de bruit dans de tels jets. Le solveur Navier-Stokes repose sur une méthode LES sur maillage non-structuré et le solveur acoustique sur une méthode de Galerkine discontinue d’ordre élevé sur maillage non-structuré. La méthodologie est tout d’abord évaluée sur des cas académiques visant à valider la simulation par couplage fort. Après des calculs préliminaires, la méthodologie est appliquée à la simulation du bruit d’un jet libre supersonique à Mach 3.1. Une méthode de déclenchement géométrique de la turbulence est implémentée sous la forme d’une marche à la paroi de la tuyère. La simulation aboutit à des estimations du bruit très proches des mesures réalisées au banc MARTEL et met en évidence des effets non-linéaires significatifs ainsi qu’un mécanisme singulier de rayonnement des ondes de Mach. Dans une démarche de progression vers des cas toujours plus réalistes, l’ensemble de l’approche numérique est finalement adaptée avec succès à la simulation du bruit d’un jet en présence d’un carneau. À terme, elle pourra être étendue à des configurations multi-jets réactifs, avec injection d’eau, voire à l’échelle 1. / During a space launch, the noise from hot supersonic jets, generated by rocket engines at liftoff and interacting with the launch pad, is harmful to the launcher and in particular its payload. Consequently, space actors are seeking to strengthen their understanding and control of this acoustic environment through numerical methods and tools, among the others. However, they do not dispose of a comprehensive numerical strategy that can simultaneously take into account accurate noise generation, nonlinear acoustic propagation, complex installation effects and realistic geometries, which are inherent to space applications. For this purpose, the present study consists in setting up and validating a numerical simulation methodology using a Navier-Stokes − Euler two-way coupling approach, then applying it to realistic cases of supersonic jet noise in order to improve prediction capabilities and contribute to the understanding of the noise generation mechanisms in such jets. The Navier-Stokes solver is based on an LES method on unstructured mesh and the acoustic solver on a high-order discontinuous Galerkin method on unstructured mesh. The methodology is first assessed on academic cases to validate the use of the two-way coupling. After preliminary computations, the methodology is applied to the simulation of the noise from a supersonic free jet at Mach 3.1. A geometric turbulence tripping method is implemented via a step at the nozzle wall. The computation leads to noise predictions very close to the experimental measurements performed at the MARTEL test bench and highlights significant nonlinear effects as well as a quite particular Mach waves radiation mechanism. Targeting even more realistic cases, the entire numerical approach is finally successfully adapted to the simulation of the noise from a supersonic jet configuration including a flame trench. In the future, it may be extended to configurations with clustered reactive jets, water injection devices or even at full scale.

<p>Fibre suspensions in the fluid medium are common in industry, biology, and the environment. Industrial examples of concentrated suspensions include fresh concrete, uncured solid rocket fuel, and biomass slurries; natural examples include silt transfer in rivers and red blood cells in the blood.  These suspensions often include a Newtonian fluid as their suspending medium; still, these suspensions exhibit a plethora of non-Newtonian properties, such as yield stresses, rate-dependent rheology, and normal stresses, to name a few. Other than volume fraction, the type of fiber material, the presence of fluid-fiber or fiber-fiber interactions such as hydrodynamic, Brownian, colloidal, frictional, chemical, and/or electrostatic determine the rheological behavior of suspension. The average inter-fiber gaps between the neighboring fibers decrease significantly as the suspension volume fraction move towards a concentrated regime. As a result, in this regime, inter-fiber interactions become dominant.  Moreover, the surface asperities are present on the fiber surface even in the case of so-called smooth fibers, as fibers in real suspensions are not perfectly smooth. Hence, contact forces arising from the direct touching of the fibers become one of the essential factors in determining the rheology of suspensions.</p> <p>We first describe the causes of yield stress, shear thinning, and normal stress differences in fibre suspensions. We model the fibers as inextensible continuous flexible slender bodies with the Euler-Bernoulli beam equation governing their dynamics suspended in an incompressible Newtonian fluid. The fiber dynamics and fluid flow coupling is achieved using the immersed boundary method (IBM). In addition, the fiber surface roughness lead to inter-fiber contacts resulting in normal and tangential forces between the fibers, which follow Coulomb’s law of<br> friction. The surface roughness is modeled as hemispherical protrusions on the fiber surfaces. In addition to the comparison of the computational model to the experimental results, we demonstrate that attractive interactions lead to yield stress and shear thinning rheology.</p> <p>Furthermore, we investigate the effects of fiber aspect ratio, roughness, flexibility, and volume fraction on the rheology of concentrated suspensions. We find that the suspension viscosity increases with increasing the volume fraction, roughness, fiber rigidity, and aspect ratio. The increase in relative viscosity is the macroscopic manifestation of a similar increase  in the microscopic contact contribution with these parameters. In addition, we observe positive and negative first and second normal stress differences, respectively, in agreement with previous experiments. Lastly, we propose a modified Maron-Pierce law to quantify the the jamming volume fraction with varying fiber aspect ratio and roughness. Additionally, we provide a constitutive model to calculate the viscosity at various volume fractions, aspect ratios, and shear rates.</p>

<p dir="ltr">Positive displacement machines are used in various industries spanning the power spectrum, from industrial robotics to heavy construction equipment to aviation. These machines should be highly efficient, compact, and reliable. It is very advantageous for designers to use virtual simulations to design and improve the performance of these units as they significantly reduce cost and downtime. The recent trends of electrification and the goal to increase power density force these units to work at higher pressures and higher rotational speeds while maintaining their efficiencies and reliability. This push means that the simulation models need to advance to account for various aspects during the operation of these machines. </p><p dir="ltr">These machines typically have several bodies in relative motion with each other. Quantifying these motions and solving for their effect on the fluid enclosed are vital as they influence the machine's performance. The push towards higher rotational speeds introduces unwanted cavitation and aeration in these units. To model these effects, keeping the design evaluation time low is key for a designer. The lumped parameter approach offers the benefit of computational speed, but a major drawback that comes along with it is that it typically assumes fluid inertia to be negligible. These effects cannot be ignored, as quantifying and making design considerations to negate these effects can be beneficial. Therefore, this thesis addresses these key challenges of cavitation dynamics, body dynamics, and accounting for fluid inertia effects using a lumped parameter formulation.</p><p dir="ltr">To account for dynamics features related to cavitation, this thesis proposes a novel approach combining the two types of cavitation, i.e., gaseous and vaporous, by considering that both vapor and undissolved gas co-occupy a spherical bubble. The size of the spherical bubble is solved using the Rayleigh-Plesset equation, and the transfer of gas through the bubble interface is solved using Henry's Law and diffusion of the dissolved gas in the liquid. These equations are coupled with a novel pressure derivative equation. To account for body dynamics, this thesis introduces a novel approach for solving the positions of the bodies of a hydraulic machine while introducing new methods to solve contact dynamics and the application of Elasto Hydrodynamic Lubrication (EHL) friction at those contact locations. This thesis also proposes strategies to account for fluid inertia effects in a lumped parameter-based approach, taking as a reference an External Gear Machine. This thesis proposes a method to study the effects of fluid inertia on the pressurization and depressurization of the tooth space volumes of these units. The approach is based on considering the fluid inertia in the pressurization grooves and inside the control volumes with a peculiar sub-division. Further, frequency-dependent friction is also modeled to provide realistic damping of the fluid inside these channels.</p><p dir="ltr">To show the validity of the proposed dynamic cavitation model, the instantaneous pressure of a closed fluid volume undergoing expansion/compression is compared with multiple experimental sources, showing an improvement in accuracy compared to existing models. This modeling is then further applied to a gerotor machine and validated with experiments. Integrating this modeling technique with current displacement chamber simulation can further improve the understanding of cavitation in hydraulic systems. Formulations for body dynamics are tested on a prototype Gerotor and Vane unit. For both gerotor and vane units, comparisons of simulation results to experimental results for various dynamic quantities, such as pressure ripple, volumetric, and hydromechanical efficiency for multiple operating conditions, have been done. Extensive validation is performed for the case of gerotors where shaft torque ripple and the motion of the outer gear is experimentally validated. The thesis also comments on the distribution of the different torque loss contributions. The model for fluid inertia effects has been validated by comparing the lumped parameter model with a full three-dimensional Navier Stokes solver. The quantities compared, such as tooth space volume pressures and outlet volumetric flow rate, show a good match between the two approaches for varying operating speeds. A comparison with the experiments supports the modeling approach as well. The thesis also discusses which operating conditions and geometries play a significant role that governs the necessity to model such fluid inertia effects in the first place.</p>