The effect of ultrasonic vibration on the anodic oxidation of silver foil in KOH was studied. An increase in charging capacity of approximately 20% was found to be the result of cavitation erosion. Silver wire was exposed to tension and torsion during oxidation but no change in charge acceptance was caused by these stresses. The oxide growth rate on silver foil electrodes was compared to rate equations that have been proposed for other metals. Uhlig's equations for the growth of semiconductor oxides was found to describe most of the data. The data did not fit other rate equations. Determination of the location of radioactive Ag110 in the oxide layer indicated that silver oxide grows by direct transport of the silver ion through the oxide, if a uniform oxide thickness is assumed. However, the dissolution-precipitation-model of oxide growth describes the data better and allows for the non-uniform oxide thickness which is characteristic of silver.

No description available.

No description available.

No description available.

Alkali-ion batteries have revolutionized modern life through enabling the widespread application of portable electronic devices. The call for adapting renewable energy in many applications will also see an increase in the demand of alkali-ion batteries, specially to account for the intermittent nature of the renewable energy sources. However, the advancement of such technologies will require innovation on the forefront of materials development as well as fundamental understanding on the physical and chemical processes from atomic to device length scales. Herein, we focus on advancing energy storage devices such as alkali-ion batteries through cathode materials development and discovery as well as fundamental understanding through multiscale advanced synchrotron spectroscopic and microscopic characterizations. Multiscale electrochemical properties of cathode materials are unraveled through complementary characterizations and design principles are developed for stable cathode materials for alkali-ion batteries. In Chapter 1, we provide a comprehensive background on alkali-ion batteries and cathode materials. The future prospect of Li-ion and beyond Li-ion batteries are summarized. Surface to bulk chemistry of alkali-ion cathode materials is introduced. The prospect of combined cationic and anionic redox processes to enhance the energy density of cathode materials is discussed. Structural and chemical complexities in cathode materials during electrochemical cycling as well as due to anionic redox are summarized. In Chapter 2, we explain an inaugural effort on tuning the 3D nano/mesoscale elemental distribution of cathode materials to positively impact the electrochemical performance of cathode materials. We show that engineering the elemental distribution can take advantage of depth dependent redox reactions and curtail harmful side reactions at cathode-electrolyte interface which can stabilize the electrochemical performance. In Chapter 3, we show that the surface to bulk chemistry of cathode particles is distinct under applied electrochemical potential. We show that the severe surface degradation at the beginning stages of cycling can impact the long-term cycling performance of cathode materials in alkali-ion batteries. In Chapter 4, we utilize the structural and chemical complexities of sodium layered oxide materials to synthesize stable cathode materials for half cell and full cell sodium-ion batteries. Meanwhile, challenges with enabling long term cycling (more than 1000 cycles) are deciphered to be transition metal dissolution and local and global structural transformations. In Chapter 5, we utilize anionic redox in conjunction with conventional cationic redox of cathode materials for alkali-ion batteries to enhance the energy density. We show that the stability of anionic redox is closely related to the local transition metal environment. We also show that a reversible evolution of local transition metal environment during cycling can lead to stable anionic redox. In Chapter 6, we provide design principles for cathode materials for advanced alkali-ion batteries for application under extreme environments (e.g., outer space and nuclear power industries). For the first time, we systematically study the microstructural evolution of cathode materials under extreme irradiation and temperature to unravel the key factors affecting the stability of battery cathodes. Our experimental and computational studies show that a cathode material with smaller cationic antisite defect formation energy than another is more resilient under extreme environments. / Doctor of Philosophy / Alkali-ion batteries are finding many applications in our life, ranging from portable electronic devices, electric vehicles, grid energy storage, space exploration and so on. Cathode materials play a crucial role in the overall performance of alkali-ion batteries. Reliable application of alkali-ion batteries requires stable and high-energy cathode materials. Hence, design principles must be developed for high-performance cathode materials. Such design principles can be benefited from advanced characterizations that can reveal the surface-to-bulk properties of cathode materials. Herein, we focus on formulating design principles for cathode materials for alkali-ion batteries. Aided by advanced synchrotron characterizations, we reveal the surface-to-bulk properties of cathodes and their role on the long-term stability of alkali-ion batteries. We present tuning structural and chemical complexities as a method of designing advanced cathode materials. We show that energy density of cathode materials can be enhanced by taking advantage of a combined cationic and anionic redox. Lastly, we show design principles for stable cathode materials under extreme conditions in outer space and nuclear power industries (under extreme irradiation and temperature). Our study shows that structurally resilient cathode materials under extreme irradiation and temperature can be designed if the size of positively charged cations in cathode materials are almost similar. Our study provides valuable insights on the development of advanced cathode materials for alkali-ion batteries which can aid the future development of energy storage devices.

The development and commercialization of alkali ion secondary batteries has played a critical role in the development of personal electronics and electric vehicles. The recent increase in demand for electric vehicles has pushed for lighter batteries with a higher energy density to reduce the weight of the vehicle while with an emphasis on improving the mile range. A resurgence has occurred in lithium, and sodium, metal anode research due to their high theoretical capacities, low densities, and low redox potentials. However, Li and Na metal anodes suffer from major safety issues and long-term cycling stability. This dissertation focuses on the investigation of the interfacial chemistries between alkali metal-carbon host interactions and the electrode-electrolyte interactions of the cathode and anode with boron-based electrolytes to establish design rules for "lean" alkali metal composite anodes and improve long-term stability to enable alkali metal batteries for practical electrochemical applications. Chapter 2 of this thesis focuses on the design and preliminary investigation of "lean" lithium-carbon nanofiber (<5 mAh cm-2) composite anodes in full cell testing using a LiNi0.6Mn0.2Co0.2O2 (NMC 622) cathode. We used the electrodeposition method to synthesize the Li-CNF composite anodes with a range of electrodeposition capacities and current densities and electrolyte formulations. Increasing the electrodeposition capacity improved the cycle life with 3 mAh cm-2 areal capacity and 2% vinylene carbonate (VC) electrolyte additive gave the best cycle life before reaching a state of "rapid cell failure". Increasing the electrodeposition rate reduced cycling stability and had a faster fade in capacity. The electrodeposition of lithium metal into a 2D graphite anode significantly improved cycle life, implying the increased crystallinity of the carbon substrate promotes improved anode stability and cycling capabilities. As the increased crystallinity of the carbon anode was shown to improve the "lean" composite anode's performance, Chapter 3 focuses on utilizing a CNF electrode designed with a higher degree of graphitization and probing the interacting mechanism of Li and Na with the CNF host. Characterization of the CNF properties found the material to be more reminiscent of hard carbon materials. Electrochemical analysis showed better long-term performance for Na-CNF symmetric cells. Kinetic analysis, using cyclic voltammetry (CV), revealed that Na ions successfully (de)intercalated within the CNF crystalline interlayers, while Li ions were limited to surface adsorption. A change in mechanism was quickly observed in the Na-CNF symmetric cycling from metal stripping/plating to ion intercalation/deintercalation, enabling the superior cycling stability of the composite anode. Improving the Na metal stability is necessary for enabling Na-CNF improved long-term performance. Sodium batteries have begun to garner more attention for grid storage applications due to their overall lower cost and less volumetric constraint required. However, sodium cathodes have poor electrode-electrolyte stability, leading to nanocracks in the cathode particles and transition metal dissolution. Chapter 4 focuses on electrolyte engineering with the boron salts sodium difluoro(oxolato)borate (NaDFOB) and sodium tetrafluoroborate (NaBF4) mixed together with sodium hexafluorophosphate (NaPF6) to improve the electrode-electrolyte compatibility and cathode particle stability. The electrolytes containing NaDFOB showed improved electrochemical stability at various temperatures, the formation of a more robust electrode-electrolyte interphase, and suppression in transition metal (TM) reduction and dissolution of the cathode particles measured after cycling. In Chapter 5, we focus on the electrochemical properties and the anode-electrolyte interfacial chemistry properties of the sodium borate salt electrolytes. Similar to Chapter 4, the NaDFOB containing electrolytes have improved electrochemical performance and stability. Following the same electrodeposition parameters as Chapter 2, we find the NaDFOB electrolytes improves the stability of electrodeposited Na metal and the "lean" composite anode's cyclability. This study suggests the great potential for the NaDFOB electrolytes for Na ion battery applications. / Doctor of Philosophy / The ever-increasing demand for high energy storage in personal electronics, electric vehicles, and grid energy storage has driven for research to safely enable alkali metal (Li and Na) anodes for practical energy storage applications. Key research efforts have focused on developing alkali metal composite anodes, as well as improving the electrode-electrolyte interfacial chemistries. A fundamental understanding of the electrode interactions with the electrolyte or host materials is necessary to progress towards safer batteries and better battery material design for long-term applications. Improving the interfacial interactions between the host-guest or electrode-electrolyte interfaces allows for more efficient charge transfer processes to occur, reduces interfacial resistance, and improves overall stability within the battery. As a result, there is great potential in understanding the host-guest and electrode-electrolyte interactions for the design of longer-lasting and safer batteries. This dissertation focuses on probing the interfacial chemistries of the battery materials to enable "lean" alkali metal composite anodes and improve electrode stability through electrolyte interactions. The anode-host interactions are first explored through preliminary design development for "lean" alkali composite anodes using carbon nanofiber (CNF) electrodes. The effect on increasing the crystallinity of the CNF host on the Li- and Na-CNF interactions for enhanced electrochemical performance and stability is then investigated. In an effort to improve the capabilities of Na batteries, the electrode-electrolyte interactions of the cathode- and anode-electrolyte interfacial chemistries using sodium borate salts are probed using electrochemical and X-ray analysis. Overall, this dissertation explores how the interfacial interactions affect, and improve, battery performance and stability. This work provides insights for understanding alkali metal-host and electrode-electrolyte properties and guidance for potential future research of the stabilization for Li- and Na-metal batteries.

Yes / The chlor-alkali industries produce caustic soda (NaOH), chlorine (Cl2 ), and hydrogen (H2 ) as primary products. In 2021, the global chlor-alkali market was valued at $63.2 billion. The article evaluates the global aspects of chlor-alkali industries and prospects for Bangladesh. The current production capacity of NaOH from the chlor-alkali industries in Bangladesh is around 282,150 metric tons/year (MT/y). The by-products, chlorine (Cl2 ) of 250,470 MT/y and hydrogen (H2 ) of 7055 MT/y, are produced domestically. The local demand of Cl2 is 68,779 MT/y. However, there are no systematic utilizations of the residual Cl2 and vented H2 , which threatens the sustainability of the chlor-alkali industries. The article prefigures that a 150,000 MT/y PVC plant can utilize 45.2 % of residual Cl2 of chlor-alkali plants, which would be an economical and environmental milestone for Bangladesh. The residual Cl2 can earn revenue of 908 million USD/y, which can be utilized to import ethylene. For the sustainable utilization of vented H2 , production of H2O2 , fuel cell electric vehicle (FCEV) and H2 fuel-cell-based power plant are the feasible solutions. Thus, for the long-term growth of the chlor-alkali industry in Bangladesh and other developing countries, systematic utilization of Cl2 and H2 is the only feasible solution. / This research was funded by ‘BUET Chemical Engineering Forum (BCEF), 001-2020.

No / The comet assay or single-cell gel electrophoresis assay is a relatively simple and sensitive technique for quantitatively measuring DNA damage and repair at the single-cell level in all types of tissue where a single-cell suspension can be obtained. Isolated cells are mixed with agarose, positioned on a glass slide, and then lysed in a high-salt solution which removes all cell contents except the nuclear matrix and DNA, which is finally subjected to electrophoresis. Damaged DNA is electrophoresed from the nuclear matrix into the agarose gel, resembling the appearance of a comet, while undamaged DNA remains largely within the proximity of the nuclear matrix. By choosing different pH conditions for electrophoresis, different damage types and levels of sensitivity are produced: a neutral (pH 8–9) electrophoresis mainly detects DNA double-strand breaks, while alkaline (pH ≥ 13) conditions detect double- and single-strand breaks as well as alkali-labile sites. This protocol describes a standard comet assay study for the analysis of DNA damage and outlines important variations of this protocol.

No / The presence of free water in mortars destined for silo or bagged storage can lead to the degradation of the binder phase. Such water may be present as a result of using wet, as-delivered sand or as a consequence of prior processes such as de-activation of Roman cement. Thus, water must be removed from the system prior to storage. Part 1 of this paper describes the control of a technique by which quicklime is added to the wet system which principally dries it by both slaking the quicklime and evaporation as a consequence of the exothermic slaking reaction. Two examples of mortars are presented in which excess water is removed from the system by the inclusion of quicklime. In the first, the water is present in the as-delivered sand and the binder is a combination of the slaked lime and ggbs. In the second, the water remains after pre-hydration of a Roman cement which is a process to retard its rapid setting characteristics. It is shown that optimally dried mortars are not subject to degradation following storage of both mortar types. (C) 2015 Elsevier Ltd. All rights reserved.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第25287号 / 工博第5246号 / 新制||工||1999(附属図書館) / 京都大学大学院工学研究科材料工学専攻 / (主査)教授 杉村 博之, 教授 邑瀬 邦明, 准教授 小林 圭 / 学位規則第4条第1項該当 / Doctor of Agricultural Science / Kyoto University / DFAM