491 |
Utilização de câmera por infravermelho para avaliação de diferentes patologias em clima tropical e uso conjunto de sistemas de banco de dados para detecção de câncer de mamaCosta de Araújo, Marcus 31 January 2009 (has links)
Made available in DSpace on 2014-06-12T17:35:45Z (GMT). No. of bitstreams: 2
arquivo2067_1.pdf: 4714055 bytes, checksum: 7f623fa229cc342aa827d1eaf9b4c783 (MD5)
license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5)
Previous issue date: 2009 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / A inspeção termográfica é uma técnica não-destrutiva e sem uso de radiações ionizantes,
fator este que sem dúvida é sua grande vantagem para aplicação na medicina. Utiliza a
radiação infravermelha emitida pelos corpos para medir temperaturas ou observar padrões
diferenciais de distribuição de temperatura. Dentre as aplicações da termografia na
medicina, destaca-se sua utilização na detecção de tumores mamários, nos quais as células
produzem substâncias responsáveis pela criação de uma nova vascularização ao seu redor.
Os novos vasos elevam a perfusão sangüínea, causando um aumento da temperatura no
local, caracterizando-se assim como um teste fisiológico, enquanto que outros métodos
tradicionais de diagnóstico, tais como ultrassom e mamografia, representam normalmente
testes anatômicos. As imagens estão sendo obtidas com a utilização de uma câmera de
infravermelho FLIR S45, adquirida pelo Departamento de Engenharia Mecânica (DEMEC)
da Universidade Federal de Pernambuco, através do Edital FINEP 2003. Os exames são
efetuados em pacientes do Hospital das Clínicas da UFPE. A aquisição de imagens
termográficas de mama, de pessoas com suspeita de câncer ou outros distúrbios de mama,
bem como o desenvolvimento de um portal eletrônico capaz de cruzar e de manipular dados
e imagens termográficas desses pacientes, como um prontuário eletrônico de paciente, é o
objetivo deste trabalho. O banco de dados (BD) desenvolvido funciona sobre um software
escrito em PHP (Hipertext Preprocessor), uma linguagem não compilada, embutido em
código HTML, usando bases de dados MySQL (sistema de gerenciamento de banco de
dados que utiliza o padrão SQL). O sistema permite o acesso a usuários identificados por
senha. Cada usuário mantém um nível de privilégio, garantindo apenas a visualização dos
dados cadastrados ou permitindo o cadastro, alteração ou remoção de pacientes já
cadastrados. Há ainda uma área para pesquisa de pacientes já cadastrados, na qual pode-se
realizar a busca por pacientes como o resultado da combinação de variáveis de interesse.
Cada paciente é visualizado em janelas independentes, facilitando a observação conjunta de
vários pacientes. Os dados dos pacientes já cadastrados podem ser exportados para arquivos
em formato Excel, o que permite a emissão de relatórios, gráficos e análises estatísticas
sobre esses dados
|
492 |
Descrição morfológica e da trajetória tridimensional dos cascos de equinos da raça Mangalarga Marchador / Morphological description and description of the three-dimensional trajectory of Mangalarga Marchador horse hoovesSilva, Thayne de Oliveira 17 July 2017 (has links)
Submitted by MARCOS LEANDRO TEIXEIRA DE OLIVEIRA (marcosteixeira@ufv.br) on 2018-07-24T11:40:16Z
No. of bitstreams: 1
textocompleto.pdf: 1185499 bytes, checksum: 4e05140c2b8cee1bcd0af3e67874ccf9 (MD5) / Made available in DSpace on 2018-07-24T11:40:16Z (GMT). No. of bitstreams: 1
textocompleto.pdf: 1185499 bytes, checksum: 4e05140c2b8cee1bcd0af3e67874ccf9 (MD5)
Previous issue date: 2017-07-17 / A pesquisa teve como objetivos descrever a morfologia dos cascos dos membros torácicos e pélvicos de equinos da raça Mangalarga Marchador. Adicionalmente, descrever a trajetória (deslocamento vertical, longitudinal e transversal), alinhamento e comportamento do movimento dos cascos nesses animais, durante o andamento marcha batida (MB) e picada (MP), na velocidade curta e média (marcha reunida e marcha média). Foram utilizados 28 equinos pertencentes a diversos criatórios do Brasil, que participaram da Exposição Nacional dos Criadores do Cavalo Mangalarga Marchador, sendo divididos em quatro grupos: sete fêmeas de marcha batida, sete fêmeas de marcha picada, sete machos de marcha batida e sete machos de marcha picada. Para descrição morfológica do casco foram mensurados comprimento da parede dorsal (CP), altura dos talões medial (ATM) e lateral (ATL), e o ângulo (ANG) dos cascos. Para o estudo cinemático, foi utilizado um marcador retroreflexivo, de 1,5 cm de diâmetro, colocado na região dorsoproximal da muralha dos quatro cascos. As coordenadas tridimensionais (3D) deste marcador no andamento marcha batida e picada foram obtidas utilizando um sistema optoeletronico (Sistema Optitrack®, Natural Point, Corvallis, Oregon, USA – modelo PRIME 17 w), utilizando 18 câmeras posicionadas ao longo de um percurso de 16 m. As coordenadas 3D foram plotadas em função do tempo e nos planos dorsal, sagital e transverso para análise do padrão do movimento por meio do programa Visual 3D® (Visual3D v6 Professional, C-Motion, Inc., Century Blvd, Germantown – USA). Membros torácicos e pélvicos foram analisados separadamente. Primeiramente foi verificada a simetria entre os antímeros, e depois de verificada a normalidade, os efeitos de sexo e tipo de marcha na descrição morfológica do casco foram estudados por meio da análise de variância (ANOVA de duas vias). Para observar a influencia do CF na morfologia do casco foi usada análise de regressão linear, relacionando a data do último CF com os valores encontrados para CP, ATM, ATL e ANG. Os dados referentes à avaliação cinemática foram analisados de forma descritiva (média, desvios padrão e porcentagem) e inferencial.Também foi verificada simetria entre antímeros e normalidade dos dados, que não foi encontrada para o deslocamento transversal, então para verificar os efeitos de sexo, marcha e velocidade foi utilizada o teste não paramétrico Wilcoxon. Para os deslocamentos longitudinal e vertical o teste utilizado foi ANOVA. O valor de significância foi de 5%. As médias de CP, ATM, ATL e ANG foram 94,50±8,25 mm, 41,41±4,84 mm, 41,00±4,36 mm e 47,76±2,88 graus, respectivamente. O CP sofreu efeito da marcha (maior na batida), enquanto ATM e ATL variaram com a marcha e sexo (machos de marcha batida) nos membros torácicos, e apenas a sexo (machos) nos membros pélvicos. O ANG não sofreu variação da marcha e do sexo. A velocidade executada na marcha reunida e na marcha média varia de 11,05 a 11,49 km/h e 12,77 a 13,71 km/h, respectivamente. Apenas dois animais de MP apresentaram completo alinhamento dos cascos. Fêmeas de MB apresentaram 71,43% de desalinhamento. Os membros torácicos e pélvicos se comportaram de forma semelhante, sendo que no deslocamento vertical houve efeito de marcha, que foi maior na batida. Também houve efeito da marcha no movimento longitudinal, sendo maior na marcha batida, e efeito de velocidade, que foi maior na marcha média (velocidade média). Movimentos transversais apesar de irregulares não sofreram efeitos. O gesto ideal foi encontrado em maior número no grupo das fêmeas de MB na marcha média (71,43%). No membro pélvico foram encontrados dois tipos de movimento trasnversais, um descrevendo um arco externo e outro um arco interno (16,07% dos animais). A data do último CF tem relação inversa com a altura dos talões. Cascos de equinos Mangalarga Marchador apresentam variação de CP, ATM e ATL. O movimento transversal existe, apesar de não ser descrito no padrão da marcha. Os achados da presente pesquisa irão colaborar com o maior conhecimento do funcionamento do sistema locomotor de equinos, servirão de base para estudos futuros e contribuirão para o entendimento do padrão da marcha realizada pela raça Mangalarga Marchador. / The objectives of this study were to describe the morphology of fore- and hindlimb hooves of Mangalarga Marchador (MM) horses and describe the trajectory (vertical, longitudinal, and transverse displacements), alignment, and pattern shown by the hooves of these animals during the marcha batida (MB) and marcha picada (MP) gaits, at collected (short speed) and medium (medium speed) walks. Twenty-eight animals belonging to several horse farms in Brazil that participated in the National Mangalarga Marchador Breeders' Horse Show were divided into four groups: seven MB mares, seven MP mares, seven MB stallions, and seven MP stallions. For the morphological description of the hoof, the length of the dorsal wall (WL); height of medial (MHH) and lateral (LHH) heels; and hoof angle (ANG) were measured. For the kinematic study, a 1.5-cm-diameter retro-reflective marker was fixed to the dorsoproximal region of the wall of the four hooves. The three-dimensional coordinates (3D) of this marker in the marcha batida and marcha picada gaits were obtained using an optoelectronic system (Optitrack®, Natural Point, Corvallis - OR, USA – model PRIME 17 w), with 18 cameras placed along a 16-m track. The 3D coordinates were plotted as a function of time on the dorsal, sagittal, and transverse planes for an analysis of the movement pattern using Visual 3D® software (Visual3D v6 Professional, C-Motion, Inc., Century Blvd, Germantown - MD, USA). Fore- and hindlimbs were analyzed separately. First, the symmetry between the antimeres was checked, and after normality was confirmed, the effects of sex and marcha type on the morphological description of the hoof were studied by analysis of variance (two-way ANOVA).To observe the influence of TS on hoof morphology, a linear regression analysis was performed, relating the date of the last TS with the values found for WL, MHH, LHH, and ANG. Data pertaining to the kinematic evaluation were analyzed descriptively (means, standard deviations, and percentage) and inferentially. Symmetry between the antimeres and data normality were tested and not confirmed for vertical displacement; thus, Wilcoxon non-parametric test was used to check the effects of sex, marcha type, and speed. A three-way ANOVA was used for the longitudinal and vertical displacements. The significance level adopted was 5%. Mean values for WL, MHH, LHH, and ANG were 94.50±8.25 mm, 41.41±4.84 mm, 41.00±4.36 mm, and 47.76±2.88 degrees, respectively. Wall length was affected by marcha type (higher in batida), while MHH and LHH varied with marcha type and gender (marcha batida males) in the forelimbs, and only gender (males) in the hindlimbs. ANG did not vary according to marcha type or sex. The speeds used at collected and medium walks ranged from 11.05 to 11.49 km/h and 13.71 to 12.77 km/h, respectively. Only two MP animals showed complete alignment of the hooves. Marcha batida mares had 71.43% hoof misalignment. Fore- and hindlimbs behaved similarly, with an effect of marcha type observed in vertical displacement, which was higher in the batida gait. There was also an effect of marcha type on longitudinal displacement, which was higher in MB; and an effect of speed, which was higher at medium walk (medium speed). Though irregular, transverse movements were not affected. The ideal style was most frequent (71.43%) in the group of medium-walk MB females. Two types of transverse movement were detected in the hindlimb: one describing an outer arc, and another describing an inner arc (16.07% of the animals). The date of the last trimming-shoeing is inversely related to the height of the heels. The hooves of Mangalarga Marchador horses vary in WL, MHH, and LHH. Transverse movement exists, though not described in the marcha pattern. The current findings will serve as basis for further research and contribute to extending the knowledge of the horse locomotor system and to the better understanding the marcha gait pattern of the Mangalarga Marchador breed.
|
493 |
Análise dos esforços de alta intensidade de jogadores de futebol profissional / Analysis of high intensity efforts of professional soccer playersMarche, Ana Lorena, 1985- 17 August 2018 (has links)
Orientador: Sergio Augusto Cunha / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Educação Física / Made available in DSpace on 2018-08-17T08:19:48Z (GMT). No. of bitstreams: 1
Marche_AnaLorena_M.pdf: 995809 bytes, checksum: 6e695161a6f78b6dcebdc5faead3fb5e (MD5)
Previous issue date: 2010 / Resumo: O objetivo deste trabalho foi caracterizar os esforços de alta intensidade realizados por jogadores de futebol durante jogos oficiais. Para isso foram gravadas nove partidas da primeira divisão do campeonato brasileiro de 2001 a 2008, por quatro câmeras digitais, com uma frequência de aquisição de 7.5 e 30 Hz, posicionadas em um local elevado do estádio. A trajetória dos jogadores durante a partida inteira foi obtida através do software Dvideo, que permite a medição semi-automática da posição dos jogadores. Em seguida, realizou-se a reconstrução 2D dos dados e, de posse das coordenadas bidimensionais de todos os jogadores em campo durante todos os jogos, os quais foram suavizados através do filtro digital Butterworth de 3ª ordem, em uma freqüência de corte de 0,4 Hz, disponível no software Matlab®. Neste estudo foram analisados 107 jogadores que atuaram durante a partida inteira, excluindo-se os goleiros. Os jogadores foram divididos em cinco posições: zagueiros (n=27), laterais (n=25), volantes (n=18), meias (n=17), atacantes (n=20). As curvas de velocidade foram obtidas através da derivação numérica dos dados suavizados das trajetórias. No presente estudo, os esforços de alta intensidade (EAI) foram definidos contendo duas fases. O início da fase 1 foi definida como sendo o primeiro valor de mínimo local antes de um valor acima de 6,4 m/s e o final como sendo o instante que a velocidade ultrapassa de 6,4 m/s. O início da fase 2 foi definida como sendo o instante que a velocidade ultrapassa de 6,4 m/s e o final como sendo o instante que a velocidade diminui de 6,4 m/s. Os resultados encontrados foram: número total de EAIs de cada jogador (32 ± 12), distância percorrida nos EAIs na fase 1 e 2 (8 ± 5m, 12 ± 9m respectivamente), tempo de duração dos EAIs na fase 1 e 2 (2 ± 1s, 1,6 ± 1s, respectivamente), velocidade inicial (2 ± 1,5m/s), velocidade máxima (7 ± 1 m/s), tempo entre cada EAIs (158 ± 176s) e porcentagem do tempo andando depois do EAI (44 ± 17%). Comparando entre primeiro e segundo tempo, o número de EAIs realizados pelos jogadores mostrou uma queda significativa do primeiro para o segundo tempo. Já para o tempo entre cada EAI e a porcentagem do tempo andando ocorreu um aumento significativo do primeiro para o segundo tempo. Na comparação entre as posições, os resultados encontrados mostraram que os laterais percorrem uma maior distância e tiveram um tempo maior de EAI durante a fase 2 do que zagueiros e atacantes. Os laterais, atacantes e meias tiveram um tempo entre cada EAI menor em relação aos zagueiros e volantes. Já na porcentagem do tempo andando depois dos EAI os zagueiros e atacantes passam mais tempo andando em relação aos laterais, volantes e meias. O tempo entre cada EAI e a porcentagem do tempo andando depois dos EAIs no final do primeiro tempo e no final do segundo tempo tem diferenças significativas com os primeiros 15 minutos do primeiro e segundo tempo. Podemos concluir que ao incorporar a fase de aceleração, houve uma melhor caracterização dos esforços de alta intensidade dos jogadores de futebol, pois desta maneira os preparadores físicos tem informações sobre o esforço exigido durante uma corrida de alta intensidade / Abstract: The aim of this work is to characterize the high intensity efforts performed by soccer players during official games. For these, nine games of the first division Brazilian championship game was recorded by four stationary digital video cameras, with acquisition frequency of 7.5 and 30 Hz, positioned in the highest points of the stadium. Players' trajectories during the whole game were obtained through an automatic tracking method with Dvideo (Figueroa et al. 2006). These data were reconstructed in 2D and smoothed using a third order Butterworth low-pass filter with cutoff frequency of 0.375 Hz, available in Matlab® software. In this study 107 players that played the entire game were analyzed, excluding goalkeepers. The players were divided in five positions that were: central defenders (n=27), full backs (n=25), central midfielders (n=18), wide midfielders (n=17), attackers (n=20). The curves of velocity were obtained by numerical derivation from the data of the smoothed trajectories. In the present study the sprint was divided in two phases: the beginning of the phase 1 was defined as the first local minimum before a value of 6.4 m/s and the final as the instant that velocity was higher from 6.4 m/s. The beginning of the phase 2 was defined as the instant that velocity was higher from 6.4 m/s and the final the instant the velocity lower them 6.4 m/s. From the new definition, variables of the sprints were calculated to characterize them. The results showed that the numbers of sprints, sprints distance covered in the phase 1 and 2, sprints duration in the phase 1 and 2, initial velocity, peak velocity, time between each sprint and percentage of time walking after high intensity efforts were respectively, 32±12 sprints, 8±5 m, 12±9 m, 2±1 s, 1,6±1 s, 2±1.5 m/s, 7±1 m/s e 158±176 s. Comparison between first and second half, the number of high intensity efforts performed by the players showed a significant drop from first to second half, and the time between each high intensity efforts was a significant increase between the first and second half. Comparing the five positions of the players, the results showed that the distance covered and duration of each high intensity efforts during in the phase 2, the full backs covered a great distance and take longer time to make a sprint that central defenders and attackers. Already the percentage of time walking after high intensity efforts the central defenders and attackers spend more time walking than full backs, central midfielders and wide midfielders. The full backs, attackers and wide midfielders had a time between each high intensity efforts lower compared to the central defenders and central midfielders. The time between each high intensity efforts and the percentage of time walking after high intensity high intensity efforts at the end of the first half and at the end of the second half has significant differences with the first 15 minutes of the first and second time. It is possible to conclude that incorporating the acceleration phase allowed a better characterization of high intensity efforts of soccer players. For now on the physical trainers have more information about the effort required during a high intensity run / Mestrado / Ciencia do Desporto / Mestre em Educação Física
|
494 |
Avaliação dos elementos finitos de tensões no tecido ósseo peri-implantar durante a osseointegração / Finite element analysis of stresses in peri-implant bone tissue during osseointegrationSantos, Mateus Bertolini Fernandes dos, 1985- 02 September 2011 (has links)
Orientador: Rafael Leonardo Xediek Consani / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba / Made available in DSpace on 2018-08-17T13:50:15Z (GMT). No. of bitstreams: 1
Santos_MateusBertoliniFernandesdos_D.pdf: 5044188 bytes, checksum: b81a4d5dccdc37cad705fb6ddaf4b97c (MD5)
Previous issue date: 2011 / Resumo: Forças aplicadas por próteses totais a implantes submersos durante o período deosseointegração podem, em alguns casos, levar ao insucesso clínico. Até o momento não existe trabalho na literatura que quantifique e/ou verifique a distribuição das forças mastigatórias em implantes submersos durante a ação mastigatória de próteses totais convencionais usadas provisoriamente durante o período de osseointegração. Dessa forma, neste trabalho foram avaliadas as tensões geradas no tecido ósseo subjacente a implantes recém-colocados, em diferentes situações, durante a ação mastigatória em próteses totais convencionais provisórias inferiores, por meio da metodologia dos elementos finitos. Com software de modelagem 3-D (SolidWorks 2010, SolidWorks Corp., Concord, Massachusetts, EUA) foram confeccionados modelos tridimensionais de mandíbula simulando diferentes situações clínicas: (1) implantes submersos, próteses totais convencionais e próteses reembasadas com diferentes materiais reembasadores macios; (2) diferentes níveis de altura de exposição dos cicatrizadores (submerso, nível gengival, 1,5 mm exposto no meio bucal); e (3) diferentes espessuras e comparação entre reembasamento na base da prótese inteira ou somente na região dos implantes. As análises foram realizadas em software específico (ANSYS Workbench 12, Ansys Inc., Canonsburg, Pennsylvania, EUA) e para cada modelo foram simuladas duas situações, com aplicação de carga mastigatória em canino inferior direito (35N) e primeiro molar inferior direito (50N). Todas as análises foram realizadas em tensão máxima principal, em MPa. Os resultados obtidos demonstraram que o reembasamento da prótese com material macio reduziu a concentração de tensões no tecido ósseo peri-implantar, sendo a concentração de tensão diretamente relacionada com a maciez do material. Os cicatrizadores submersos foram os que apresentaram menor valor de concentração de tensões. A espessura e área de reembasamento estão relacionadas à transmissão de tensões ao osso peri-implantar, quando o reembasamento da região dos implantes com espessura de 3 mm apresentou melhores resultados. Comparando-se os resultados mostrados nas diferentes simulações conclui-se que a situação que promoveu menor concentração de tensões no osso peri-implantar foi com implantes submersos, reembasamento realizado somente na região dos implantes, espessura de 3 mm e material macio. / Abstract: Forces applied to submerged implants from complete dentures during the osseointegration period can, in some cases, lead to clinical failure. To date there is no study in the literaturethat quantifies and/or verifies the stress distribution of occlusal forces in submerged implants during the masticatory function of conventional complete dentures used on an interim basis during the period of osseointegration. Thus, this study evaluated the stresses in the bone adjacent to newly placed implants during the masticatory function in conventional complete dentures through the finite element methodology. Using a 3-D modeling software (SolidWorks 2010, SolidWorks Corp., Concord, Massachussets, EUA) it were made tridimensional models of a mandible simulating different clinical situations: (1) submerged implants, conventional complete dentures and relined ones with different soft liner materials; (2) different height levels of exposure to the oral environment (submerged, gingival level and 1.5mm of exposure to the oral environment); and (3) different thickness and comparation between relining the entire base or only in the region near the implants. The analysis were made in a specific software (ANSYS Workbench 12, Ansys Inc., Canonsburg, Pennsylvania, EUA) and for each model it were simulated two situations with masticatory load in inferior right canine (35N) and inferior right first molar (50N). All the analysis were made in maximum principal stress, in MPa. The obtained results showed that relined dentures with soft liner material reduced the stress concentration in the peri-implant bone tissue, being the stress concentration directly related to the softness of the material. Submerged implants presented the lowest values of stress concentration in the peri-implant bone tissue. The thickness and the area of reline are related to the transmission of stress to the peri-implant bone tissue, when relining the denture only in the region of the implants with a 3-mm thick layer of soft liner material presented better results. Comparing the results obtained from the different simulations it is possible to conclude that the situation which promoted fewer stress concentration in the peri-implant bone was with submerged implants, relining made only in the implants region, thicker layer (3 mm) of reline and softer material. / Doutorado / Protese Dental / Doutor em Clínica Odontológica
|
495 |
Análise tridimensional por elementos finitos da biomecânica de próteses implantossuportadas = influência da carga oclusal, tipo de conexão, angulação dos implantes e simplificações de modelagem / Tridimensional finite element analysis of biomechanics of implant-supported prosthesis : influence of occlusal load, implant connection system, implant tilting and modeling simplificationsTakahashi, Jessica Mie Ferreira Koyama 17 August 2018 (has links)
Orientador: Marcelo Ferraz Mesquita / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba / Made available in DSpace on 2018-08-17T13:47:37Z (GMT). No. of bitstreams: 1
Takahashi_JessicaMieFerreiraKoyama_D.pdf: 2653820 bytes, checksum: 9f12264a20dcd2dbebcecc54655dd900 (MD5)
Previous issue date: 2011 / Resumo: O objetivo nos presentes estudos foi avaliar, por meio de análise tridimensional de elementos finitos, os efeitos nos valores e padrões de distribuição de tensões de modelo virtuais de próteses implantossuportadas na presença de: 1) Simplificações de modelagem das geometrias de superfícies com rosca; 2) Variação do padrão de cargas oclusais e tipo de conexão de implantes; 3) Inclinação do implante e necessidade do uso de componentes angulados. No primeiro estudo foram confeccionados modelos virtuais simulando a interface entre o osso de uma seção posterior de mandíbula e um implante, e a interface entre o componente protético e o parafuso protético. As interfaces foram simuladas com variação da geometria das roscas e tipo de contato entre as estruturas. Os modelos da interface osso/implante receberam carga oblíqua de 180N, e os da interface abutment/parafuso carga de 41N. Foi observado, na interface implante/osso, que os valores de tensão variam de acordo com a geometria modelada e o contato entre as estruturas e que tensões artificialmente elevadas podem ser observadas em regiões pontuais. Na interface abutment/parafuso, a geometria modelada não influenciou os resultados obtidos. No segundo estudo, foram confeccionados modelos virtuais simulando próteses fixas suportadas por implantes de conexão do tipo hexágono externo, hexágono interno, e cone morse; submetidos à aplicação de cargas axiais ou oblíquas sobre a superfície da infraestrutura modelada (180N em primeiro pré-molar e primeiro molar; 280N em segundo pré-molar). Foi observado que mediante aplicação de cargas oblíquas os valores de tensão apresentaram aumento significativo, e que o local de concentração das tensões também foi alterado para regiões mais inferiores nas estruturas avaliadas. Os modelos de montagens com implantes de conexão interna apresentaram padrão de distribuição de tensão mais favorável aos tecidos de suporte. No terceiro estudo, modelos virtuais de próteses fixas implantossuportadas foram simulados com implantes distais posicionados de maneira inclinada. Os modelos foram confeccionados utilizando conexões do tipo hexágono externo e cone morse, sendo utilizados componentes com 17o de angulação. Os modelos foram submetidos às mesmas condições de carregamento citadas no estudo anterior. Foi observado que mediante inclinação dos implantes distais, não há diferença significativa nos valores de tensão nos tecidos de suporte, havendo apenas alteração na área de concentração de tensão. A tensão foi mais concentrada no osso trabecular ao redor do implante posicionado verticalmente. As conexões avaliadas apresentaram valores de tensão semelhantes nos tecidos de suporte, enquanto os modelos de conexão cone morse apresentaram maior tensão nos componentes protéticos. Desta maneira, concluiu-se que: 1) a simplificação da geometria de roscas para análise utilizando o método de elementos finitos gera valores e padrão de distribuição de tensão confiáveis; 2) a aplicação de cargas oblíquas gera aumento significativo na tensão nas estruturas ósseas; 3) o tipo de conexão do implante pode interferir na tensão em componentes protéticos e osso; 4) a inclinação de implantes não gera maior tensão nos tecidos de suporte. / Abstract: The aim of the following studies was to evaluate with finite element analysis, the effect on stress values and distribution pattern of virtual models of implant-supported prostheses in the presence of: 1) Modeling simplification of threaded surfaces geometry; 2) Variation of occlusal load pattern and implant connection type; 3) Implant inclination and the use of angled abutments. On the first study, virtual three-dimensional models were obtained simulating the interface between bone of a posterior section of the lower jaw and a dental implant, and the interface between an abutment and a prosthetic screw. The screwed interfaces were simulated with variation of thread geometry and contact between the structures. Bone/implant models were loaded with 180N oblique force, while abutment/screw models were loaded with 41N force. It was observed, on the implant/bone interface that stress values depend of the modeled geometry and the amount of contact between the surfaces; and that artificially high stress might be observed in located areas. On the abutment/screw interface, modeled geometry did not influence the results. For the second study, virtual models were obtained simulating three-element fixed partial dentures supported by two implants of external-hexagon, internal-hexagon or morse-taper connection. The models were submitted to axial or oblique loading (180N on first premolar and first molar, 280N on second premolar). It was observed that oblique loading significantly increased stress values, and changed stress concentration areas. Also, the models with internal connection implants presented stress distribution pattern more favorable to the supporting structure. On the third and final study, virtual models of implant-supported frameworks were obtained with inclined distal implants with external-hexagon or morse-taper connection and 17o angled abutment. All models were submitted to the same loading conditions previously described. It was observed that inclined implants do not significantly increase stress on supporting tissue, with changes only on stress concentration area. Higher stress was concentrated at trabecular bone around the straight implant. The evaluated connection systems presented similar stress values on the supporting tissue, while morse-taper models presented higher stress on the prosthetic components than the external-hexagon. Thus, it was concluded that: 1) finite element models, with simplified representation of the thread interface present reliable stress values and distribution patterns; 2) oblique loading of the framework increases stress values on the supporting tissues; 3) implant connection system may interfere on stress on prosthetic components and bone; 4) implant inclination does not increase stress on supporting tissue. / Doutorado / Protese Dental / Doutor em Clínica Odontológica
|
496 |
Análise tridimensional por elemento finito do comportamento biomecânico de próteses totais fixas implantossuportadas = efeito do tipo de conexão protética, cargas oclusais e número de implantes / Three-dimensional finite element analysis of biomechanics of implant-supported fixed prostheses : effect of connection system, occlusal load, and number of implantsDayrell, Andreza Costa 18 August 2018 (has links)
Orientador: Marcelo Ferraz Mesquita / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba / Made available in DSpace on 2018-08-18T05:15:14Z (GMT). No. of bitstreams: 1
Dayrell_AndrezaCosta_D.pdf: 2283239 bytes, checksum: 78a83ffa41273620963821d103b0e585 (MD5)
Previous issue date: 2011 / Resumo: A proposta neste estudo foi analisar a distribuição de tensão pelo método de elementos finitos tridimensional em próteses totais fixas inferiores implantossuportadas e região óssea peri-implantar, utilizando-se dois tipos de conexão implante-abutment externa e interna, correlacionadas ao efeito de cargas axiais e número de implantes. Modelos virtuais foram elaborados simulando uma prótese total fixa implanto suportada mandibular, de acordo com o protocolo Branemark, tendo como fatores de estudo as conexões implant-abutment Cone Morse (CM) e Hexágono Externo (HE); quatro e cinco implantes; cargas axiais 100 N bilateral, 300 N bilateral e unilateral. As condições de análise foram: 1. Próteses fixas com conexão interna Cone Morse (CM) submetidas à seis condições experimentais constituindo os modelos M1, M2 e M3 com quatro implantes e cargas de 100 N e 300 N, respectivamente; os modelos M4, M5, e M6 com cinco implantes e cargas similares; 2. Próteses fixas com conexão externa Hex Externo (HE), submetidas às mesmas condições; 3. Comparação entre os dois sistemas de conexão. Os resultados de deformação óssea (??), sob efeito de cargas axiais de 100 N, distribuíram-se homogeneamente nos grupos com CM e concentraram-se nos implantes distais nos grupos com HE. Sob efeito de cargas axiais de 300 N, a distribuição de tensão acompanhou a mesma tendência anterior, com aumento de deformação no osso (??) e implantes (MPa) cerca de 1,5-2 vezes para os grupos com CM e 3 vezes para os grupos com HE. Dentro das condições do estudo concluiu-se que: 1. sob efeito de cargas axiais de 100 N o uso das duas conexões implante-abutment Cone Morse e Hexágono Externo é bem indicado; 2. sob efeito de cargas axiais de 300 N a conexão Cone Morse apresenta melhor indicação; 3. cinco implantes não representam benefício relevante em relação à quatro; 4. com o sistema de conexão Cone Morse, a solicitação mecânica distribui-se por todos os implantes e região óssea, com o sistema Hexágono Externo, concentra-se nos distais e região óssea circundante; 5. a distribuição de tensão na infraestrutura protética é similar com os dois sistemas de conexão, apresentando resistência mecânica satisfatória com a conexão Hexágono Externo e cargas axiais de 100 N e insuficiente para ambas as conexões sob cargas axiais de 300 N / Abstract: The purpose of this study was to analyze the stress and strain distribution by three-dimensional finite element method in implant supported fixed prostheses and peri-implantar bone region, using two types of implant-abutment connection internal and external, correlated to the effect of axial loadings and number of implants. Virtual models were developed by simulating a mandibular implant supported fixed prostheses, according to the Branemark protocol, with study factors: implant-abutment connection Morse taper (MT) and External hexagon (EH); four or five implants; bilateral axial loadings 100 N, bilateral and unilateral axial loadings 300 N. The analysis conditions were: 1. Fixed prostheses with internal connection Morse taper interface (MT) simulating six experimental conditions, making the models M1, M2 and M3 with four implants and loads of 100 N and 300 N, respectively; models M4, M5, M6 with five implants and similar conditions; 2. Fixed prostheses with external connection External hexagon interface (EH), submitted to same conditions; 3. Comparison between the two connection systems. The results of von Mises stress and bone strain, under effect of 100 N axial loadings, were distributed evenly for all implants for groups with MT, focused mainly on the distal implants for groups with EH. Under effect of 300 N axial loadings, the stress and strain distribution followed the same tendency, with values increased of 1.5-2 times for the MT group and 3 times for EH groups. Within the analysis conditions the study concluded that: 1. under effect of axial loadings of 100 N, the use of two implant-abutment connections MT and EH can be well indicated; 2. under effect of axial loadings of 300 N, the Morse taper connection provides a better indication; 3. Five implants do not represent relevant benefit over four; 4. with Morse taper connection system, the mechanical stress is distributed for all implants and bone area, with the External hexagon, focuses on the distal region and surrounding bone; 5. the stress distribution in prosthetic infrastructure is similar with the two connection systems and the mechanical strength is satisfactory for groups with prosthetic connection EH and 100 N axial loadings, and insufficient for both prosthetic connections under effect of 300 N axial loadings / Doutorado / Protese Dental / Doutor em Clínica Odontológica
|
497 |
Analise de volumes parciais do tronco durante a respiração por videogrametria / Analysis of trunk partial volumes during the breath by videogrametriaLoula, Carla Maia Aguiar 28 July 2005 (has links)
Orientador: Ricardo Machado Leite de Barros / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Educação Fisica / Made available in DSpace on 2018-08-04T22:05:00Z (GMT). No. of bitstreams: 1
Loula_CarlaMaiaAguiar_M.pdf: 1615820 bytes, checksum: 09f1d59f9fd80bcffce16a5a606374be (MD5)
Previous issue date: 2005 / Resumo: Este trabalho tem como finalidade propor e avaliar uma metodologia para cálculo da variação de volume no tronco durante a ventilação humana. Para isso foi utilizado um sistema de análise cinemática tridimensional de movimentos (Dvideow) para obter a descrição das coordenadas 3D de 30 marcadores fixados sobre referências anatômicas na caixa torácica e abdômen durante a ventilação. As medidas de volume foram calculadas a partir de um modelo geométrico de representação do tronco que o subdivide em 8 dodecaedros irregulares correspondendo aos volumes parciais do tronco (tórax superior, TX-S; tórax inferior, TX-I; abdômen superior, AB-S e abdômen inferior, AB-I). Para avaliação da metodologia foram realizados três experimentos; um compara os volumes obtidos através da videogrametria com os volumes de ar trocados entre os pulmões e o meio externo, medido através da espirometria; o segundo experimento analisa a reprodutibilidade do método proposto. Um terceiro experimento foi realizado para verificar a contribuição dos compartimentos para a variação do volume total no tronco. Para tanto foram analisados os volumes do tronco de 13 voluntários em duas manobras ventilatórias distintas, volume corrente (VC) e volume máximo (VM). Na comparação entre a videogrametria e espirometria, os resultados mostraram um coeficiente de correlação de 0.9938 entre as medidas de ar obtido pela espirometria e a variação do volume do tronco medida pela videogrametria. Contudo, os valores absolutos diferiram em até 0.6 litros na inspiração profunda. No teste de reposicionamento de marcadores encontrou-se uma variabilidade da ordem de 3% do volume total médio. Na análise da contribuição dos compartimentos para o volume total do tronco foi observada uma contribuição maior do tórax em relação ao abdômen nas duas manobras estudadas. Na análise dos compartimentos TX-S, TX-I, AB-S e AB-I os compartimentos TX-I e AB-S tiveram participação mais significativa que o TX-S, enquanto que o AB-I teve uma contribuição negativa para o volume total na manobra de VC. Na manobra de VM os resultados demonstraram uma contribuição semelhante entre os compartimentos TX-S, TX-I, AB-S, enquanto o AB-I, apresentou oposição de fase em alguns voluntários. De maneira geral os resultados evidenciaram sinais correlacionados entre as variações de volume do tronco e o sinal ventilatório e a videogrametria demonstrou ser um método eficiente na análise da contribuição dos compartimentos para a variação de volume total no tronco / Abstract: This work has the objective of proposing and evaluating a methodology to calculate the trunk volume variation during human respiration. Thereunto a three-dimensional movement kinematical analysis system (Dvideow) was used to obtain the 3D coordinate description of 30 markers attached over anatomical references in the rib cage and abdomen during breathing. The volume measures were calculated from a geometrical representation model for the trunk, which subdivides it in 8 irregular dodecahedrons, corresponding to partial volumes of the trunk. To evaluate the methodology, three experiments were done: one that compares the trunk volumes obtained by videogrammetry with the volume of air exchanged between the lungs and external medium, measured by spirometry; and a second analyzes the reproducibility of the proposed method. A third experiment was executed to verify the compartments contributions to the total trunk volume variation examining this variation in 13 volunteers in two distinct ventilatory maneuvers, tidal volume and maximum volume. In the comparison between videogrammetry and spirometry, results exhibit a correlation coefficient of 0.9938, however, absolute values differ up to 0.6 liters in deep inspiration. In the reproducibility test, it was determined a variability around 3% of the mean total volume. In the compartment contribution analysis, a greater contribution from the rib cage relative to the abdomen was observed in the two studied maneuvers. In the analysis of the subdivision of rib cage and abdomen compartments, the lower rib cage and the upper abdomen had a more significant participation that the upper rib cage, while the lower abdomen had a negative contribution to the total volume during tidal volume maneuvers. In the maximum volume maneuver, results demonstrate a similar contribution for the upper ribcage, lower ribcage and upper abdomen, while the lower abdomen, presented negative contribution. In the overall, results reveal correlated signals between the trunk volume variation and the ventilatory signal, and videogrammetry proved to be an efficient method for the analysis of compartment contribution for total trunk volume variation / Mestrado / Biodinamica do Movimento Humano / Mestre em Educação Física
|
498 |
Desenvolvimento de uma metodologia para reconstrução da superficie do pe humano por videogrametria / Development of a methodology for the reconstruction of the surface of the human foot by videogrammetryProvenzano, Jose Alberto 26 February 2002 (has links)
Orientador: Ricardo Machado Leite de Barros / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Educação Fisica / Made available in DSpace on 2018-08-06T18:14:49Z (GMT). No. of bitstreams: 1
Provenzano_JoseAlberto_M.pdf: 1525261 bytes, checksum: 0920b6646b55a1687428ce36f4e8b149 (MD5)
Previous issue date: 2002 / Resumo: O estudo das características do pé humano é área de grande interesse na Biomecânica, este trabalho tem como objetivo a reconstrução tridimensional de pontos na superficie do pé humano por meio de um procedimento metodológico baseado em videogrametria. A reconstrução tridimensional do pé humano neste trabalho é realizada a partir de uma projeção estruturada de luz sobre o pé obtendo-se uma grande densidade de pontos sobre a superficie. Utilizando câmeras digitais de vídeo é feito o registro das imagens do pé sob esta projeção. Cada ponto a ser reconstruí do tem que ser registrado no mínimo por duas câmeras, essa uma exigência da reconstrução tridimensional. Para reconstrução tridimensional foi utilizado o software Dvideow, desenvolvido no Laboratório de Instrumentação para Biomecânica - UNICAMP. Após o registro das imagens faz-se necessário conhecer as coordenadas de tela de todos os pontos de interesse, para isto realiza-se o tracking de marcadores em ambiente Dvídeow. Este processo inicia-se pela definição de algoritrnos de segmentação das imagens adquiridas. A seleção dos algoritrnos dá-se de acordo com a necessidade do experimento e com o tamanho dos marcadores nas imagens, portanto, pode haver uma variação na seqüência de aplicação dos algoritrnos nas imagens registradas. Os algoritrnos operam em alterar níveis de intensidade de cor, detectar os contornos dos marcadores, determinar o número máximo de marcadores para o tracking, selecionar regiões de maior contraste de intensidade e selecionar os contornos por números máximos e mínimos de pixels. Realizado o tracking automático de marcadores, tem-se as coordenadas de tela (x,y) dos pontos nas imagens. Assim temos um par de imagens contendo as coordenadas bidimensionais dos pontos. No entanto, a ordem e a quantidade de pontos nos conjuntos de dados das duas imagens não são os mesmos. Usando rotinas matemáticas elaboradas no software Matlab realizam-se a rotulagem dos pontos resultantes do tracking, deixando assim os conjuntos de dados que contém as coordenadas bidimensionais com a mesma quantidade de pontos em ambos os conjuntos e também indexados numa mesma ordem. Em seguida em ambiente Dvideow realiza-se a reconstrução tridimensional de pontos sobre a superficie. Como resultados da reconstrução têm-se os pontos reconstruídos sobre a superficie do pé sendo possível a visualização através de gráficos. Foram feitas aplicações da metodologia em pés de três sujeitos e a um modelo de pé utilizado como parte integrante de prótese em amputados. Também foram realizadas sobre o modelo do pé, medições de distâncias entre pontos usando o método por videogrametria e medições diretas entre os pontos marcados sobre a superficie do modelo. Obteve-se como resultado para a metodologia proposta um valor para bias de 1,77 mm, para precisão do método de 0,31 mm e um erro padrão estimado em 1,80 mm. Concluí-se assim, que a metodologia desenvolvida neste trabalho permite uma forma de reconstrução tridimensional da superficie do pé humano baseado em videogrametria, através da qual se obtém informações analíticas e biomecânicas de interesse / Abstract: The study of the human foot characteristics is an area of great interest in the Biomechanics, the main goal of this study was to develop a methodology for the three-dimensional reconstruction of the points on the surface of the human foot based on videogrammetry. The three-dimensional reconstruction of the human foot, objective of this paper, is performed by starting fiom a structured projection of light on the foot obtaining great density of the points on the surface. Using digital video cameras, the register of the images of the foot is made on this projection. Each marker to be reconstructed was to be registered by at least two cameras, which is a requirement of the three-dimensional reconstruction. For the three-dimensional reconstruction was used the Dvideow software, that developed in the Laboratory of Instrumentation for Biomechanics - UNICAMP. After the image register, it is necessary to know the screen coordinates of alI the points of interest, for this purpose one makes the tracking of the markers in the Dvideo environrnent. The process begins with the definition of algorisms of segmentation of the acquired images. The selection of the algorithms takes place according to the experiments needs end to the images markers size, therefore, may be a variation in the sequence of the algorithm application on the registered images. The algorithms operates in order to alter the intensity of colors, detect the outlines ofthe markers, determine the largest amount ofmarkers for tracking, select the regions of largest contrast of color intensity and select the outlines for the maximum and minimum number of pixels. By executing the automatic tracking of the markers, we obtain the coordinates of the screen (x,y) corresponding to the points on the images. Therefore, we have a pair of images containing the bi-dimensional coordinates of the points. Nevertheless, the order and quantity ofpoints in the sets of data ofboth images are not the same. Then the Matlab software is used to label the points resulting fiom the tracking, that is, in order to let the sets of data which contain the bi-dimensional coordinates have the same amount of points in both sets and also to index the points in the same order. Right after that, in the Dvideow environrnent, the three-dimensional reconstruction of the points is performed on the surface. As a result of the reconstruction, the reconstructed points on the surface of the foot were obtained, whereas, visualization was possible through graphs. Applications of the methodology were made on the feet of three individual and on a model of a foot used as an integrating part of the prothesis of the amputee. Besides that, measurements were made on the mo deI of the foot of distances between points by using the method of videogrammetry and direct measurements between points marked on the surface of the model. For the proposed methodology, the result obtained was: a value for bias of 1.77 mm, for precision of the method of 0.31 mm and an estimated standard error at 1.80 mm. Therefore, conc1uding that the methodology developed in this paper permits a form of three-dimensional reconstruction of the surface of the human foot based on videogrammetry, through which important analytical and biomechanical information is obtained. / Mestrado / Biodinamica do Movimento Humano / Mestre em Educação Física
|
499 |
Efeito da idade e do ambiente de criação na biomecanica e bioquímica de tendões de frangos / Effect of age caged and penned environments on the biomechanics and biochemistry of chicken tendonsNakagaki,Wilson Romero 15 August 2006 (has links)
Orientador: Laurecir Gomes / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Biologia / Made available in DSpace on 2018-08-07T01:19:46Z (GMT). No. of bitstreams: 1
Nakagaki_WilsonRomero_M.pdf: 13678735 bytes, checksum: 4e8920e8d9da4cbdacc1d02f8a7c0e6c (MD5)
Previous issue date: 2006 / Resumo: Os tendões transmitem forças de tração entre músculo e osso. Os .efeitos dos estímulos mecânicos dependem da localização anatômica e níveis de atividade no tendão e da contração muscular. Além disto, em um mesmo tendão é possível observar a presença de regiões sob tensão e compressão. Diversos estudos têm relacionado alterações bioquímicas na matriz extracelular de tendões em função do exercício fisico e da idade, porém há poucos trabalhos com tendões de fTangos submetidos ou não ao exercício ativo não forçado. Neste trabalho foram analisados aspectos bioquímicos e biomecânicos do tendão calcâneo e do tendão flexor digital superficial de frangos com 1, 5 e 8 meses de idade, criados em gaiolas e em ambiente amplo. Os resultados de biomecânica mostraram que no tendão calcâneo o exercício aumentou a resistência à força de tração a partir do quinto mês, maior absorção de energia no oitavo mês, maior tensão no primeiro mês e maior rigidez no quinto mês. O exercício e a idade estimularam o aumento no conteúdo de colágeno no quinto mês. O exercício aumentou o conteúdo de glicosaminoglicanos no primeiro e oitavo mês e com o avanço da idade aumentou no oitavo mês na região de compressão e diminuiu progressivamente na região de tensão. Para o tendão flexor digital superficial, sinal de mineralização foi observado no quinto mês. Com a maturação, no grupo criado em ambiente amplo, a força (até o quinto mês) e a absorção de energia aumentaram, mas não houve alteração da rigidez, da tensão e da deformação. O exercício demonstrou que resistência à força, tensão e rigidez foram maiores no quinto mês. O conteúdo de colágeno aumentou com a idade do grupo amplo e aumentou com o exercício no quinto e oitavo meses. O conteúdo de glicosaminoglicanos diminuiu na região de tensão no oitavo mês no grupo amplo enquanto na região de compressão se manteve constante a partir do quinto mês. Com o exercício a quantidade de glicosaminoglicanos .. é substancialmente maior em SDFT jovens do que em maturos. Nossos resultados mostraram que o aumento da resistência do tendão, a maior capacidade em absorver energia e o maior conteúdo de colágeno são dependentes do próprio crescimento e maturação, mas também são influenciados pelo exercício ativo não forçado, indicando que a matriz extracelular é capaz de detectar alterações fisicas, como andar e correr, e de transmitir esta informação para as células / Abstract: The tendons transmit tensile strength between muscle and bone. The effects of the mechanical stimuli depend on the anatomicallocation and activity levels in the tendon and of the muscular contraction. Also, in a same tendon it is possible to observe the presence of regions under tension and compression. Several studies have related biochemical differences in the extracellular matrix of tendons in function of physical exercise and age, however there are few works with tendons of chickens submitted or not to the nonforced active exercise. In this work the biochemical and biomechanical aspects of the calcaneus tendon and the superficial digital flexor tendon fTom1, 5 and 8 months old chickens, caged and penned raised were analyzed.. For the calcaneus tendon the exercise increased the resistance to the load starting fTom the fifth month, larger absorption energy in the eighth month, larger stress in the first month and larger stiffness in the fifth month. The exercise and the age stimulated the increase in the collagen content in the fifth month. The exercise increased the glycosaminoglycans content in the first and eighth months and with the age it increased in the eighth month in the compression region and it decreased progressively in the tension region. For the superficial digital flexor tendon, mineralization was observed in the fifth month. With the maturation, in the penned group, the load (until the fifth month) and the absorption of energy increased, but there was not change in the stiffness, stress and strain. The exercise demonstrated that load, stress and stiffness were greater in the fifth month. The collagen content increased with the age on the penned group and with the exercise in the fifth and eighth months. The glycosaminoglycans content decreased in the tension region in the eighth month in the penned group while in the compression region it remained constant starting from the fifth month. With the exercise the glycosaminoglycans expression is substantially larger in young SDFT than in mature ones. Our results demonstrated .. that the raise in the tendon resistance, the larger capacity in energy absorption and the largest collagen content depend on the own growth and maturation, and they' re also influenced by the nonforced active exercise, indicating that the extracellular matrix is able to detect physical alterations, like walk and run, and transmit this information to the cells / Mestrado / Biologia Celular / Mestre em Biologia Celular e Estrutural
|
500 |
Hidrogel sintetico para reparo de defeitos da cartilagem articularMalmonge, Sonia Maria 22 July 2018 (has links)
Orientador: Cecilia Amelia de Carvalho Zavaglia / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-07-22T00:42:36Z (GMT). No. of bitstreams: 1
Malmonge_SoniaMaria_D.pdf: 27621772 bytes, checksum: 36c16f80f546209e3427eae886b814e0 (MD5)
Previous issue date: 1997 / Resumo: Foi realizado um estudo com hidrogéis sintéticos, para a obtenção de biomaterial com caracteristicas adequadas ao uso no reparo de defeitos da cartilagem articular. Amostras de hidrogéis de poli(2-hidróxi etil metacrilato) (poliHEMA), blendas do tipo redes semi interpenetrantes - sIPN de poliHEMA com acetato de celulose (poliHEMA-AC) e de poliHEMA com poli(metacrilato de metila-co-ácido acrílico) (poliHEMA-poli(MMA-co-AA) foram obtidas por polimerização térmica e caracterizadas quanto à capacidade de absorção de água e de solução salina; quanto ao comportamento mecânico, através de ensaios de fluência a indentação e quanto à citotoxicidade frente a cultura de células in vitro. Os resultados mostraram que é possível melhorar o comportamento mecânico de hidrogéis de poliHEMA, através da variação na quantidade de agente de reticulação ou da obtenção de blendas de poliHEMA com polímeros lineares, porém o aumento das propriedades mecânicas é sempre acompanhado de uma diminuição da capacidade de absorção de água. Nenhum dos hidrogéis estudados apresentou efeito citotóxico frente a cultura de células VERO. A blenda poliHEMA-poli(MMA-co-AA) possibilitou uma melhora das propriedades mecânicas do hidrogel de poliHEMA, sem diminuirmuito a sua capacidade de absorção de água e permitiu a incorporação de grupos negativos fixos a estrutura macromolecular, mimetizando assim a matriz extracelular da cartilagem articular e apresentando características semelhantes as da cartilagem hialina... Observação: O resumo, na íntegra, poderá ser visualizado no texto completo da tese digital / Abstract: This work shows a study carried out with synthetic hydrogels aiming the obtention of a biomaterial to be used in the repair of articular cartilage defects. Hydrogels samples of poly (2-hydroxy ethyl methacrylate) (polyHEMA) and blends of polyHEMA with cellulose acetate (CA) or poly(methyl methacrylate-co-acrylic acid) (poly(MMA-co-AA)) was obtained by thermal polymerization and the following characterisation procedures was carried out: determination of the equilibrium water content and saline solution content, evaluation of the mechanical behaviour by creep indentation tests and cytotoxicity through in vitro tests. The results showed that it is possible to improve the mechanical behaviour of the polyHEMA hydrogels by-changing the crosslinking agent amount or by blending polyHEMA with linear polymers. The mechanical properties improve was accompanied by a decrease in the equilibrium water content and let to the incorporation of negative fixed charges to the macromolecular network, mimicking the extracelular matrix of the hyaline cartilage. This hydrogel showed characteristics similar to that one of hyaline cartilage and was used in a in vivo test that showed its potential for using in the repair of articular cartilage defects. The hydrogel implant did not show significative inflammatory reaction, let to a decrease in the synovial inflammations and improved the repair of the articular cartilage defects performed in the intercondilian region of rat femur, by forming an articular surface showing better biomechanical characteristics than the surface of biological repair in case of control defects... Note: The complete abstract is available with the full electronic digital thesis or dissertations / Doutorado / Automação / Doutor em Engenharia Elétrica
|
Page generated in 0.0827 seconds