The master's thesis deals with the description of heat pump technology (HP) and its use for apartment buildings. The theoretical part contains an introduction, performance of heat pump technology, in particular a compressor heat pump (CHP). In this section is also mentioned about heat pumps for an apartment buildings. Main focus of this thesis is a design of a compact air-water heat pump for the company AISECO spol. s.r.o. This section is focused a design of an individual components of cooling circulation together with proposal of the circulation and principle of operation.

The subject of this diploma thesis is a building construction project for industrial building Rieder Beton in Jihlava. It contains an engineering report, a time schedule, a site equipment report, a design of machine assembly, a technological project together with a quality and test plan for the precast prefabricated frame and an itemized budget.

In this diploma thesis work is the goal of the construction technological project of a multifunctional building in Želatovicích. The content of this diploma thesis is the solution of the summary of the technical report, a study of the implementation of major technological stages, the time schedule of the main construction of the object, schedule object, the technological regulations for the monolithic ceiling structure and installation of steel structures, inspection and test plans, risk with subsequent security measures, itemized budget with bills of quantities, solving the major transport routes, design of mechanical assemblies and equipment to the construction site. The substrate was drawing documentation for the implementation of this construction.

This thesis compares the methods for the determination of air and moisture condensation in the construction. There are descriptions of the various methods and formulas for measuring humidity and methods for the calculation of condensation in building structures. The practical part describes the development of a method for verifying the condensation of moisture in construction. Parts of this work are the materials and methods for the development of the humidity sensor. There were used two methods – capacitive and resistive for measuring moisture condensation. In the conclusion is the evaluation of the humidity sensor and compares the results of individual measurements.

The aim of this thesis is the design of an youth apartment building in the range of designing the documentation for building construction. The building is situated on the flat plot no. 873/21 in the cadastral area „Horní Heršpice“ 612065. In the building there is 42 rooms, 2 wheelchair-accessible rooms and 4 student apartments. The capacity of the building is designed to accommodate 86 students under 18 years and 16 students older than 18 years. In the building there is also a dining room, a library, a fitness room and a gym for free time. It is partly a two-storey and partly a four-storey building without a basement, roofed by a flat roof. Masonry is designed from clay blocks and floor slab is designed by a cast-in-place reinforced concrete floor structure.

The subject of this thesis is to create evaluation criteria of technical condition of water treatment plants. The thesis is divided into four parts. In the first part of this thesis are presented evaluation systems by performance indicators drinking water treatment plants, which are then applied in real time. There are detailed descriptions of individual performance indicators. Each evaluation conducted certain period of time. After the expiry of the period under review was to evaluate and create charts to display results. In the next chapter the thesis focuses on the identification data. First, it was necessary to find out all necessary information about the water treatment plant. Necessary information means information relating to building construction, human resources, mechanical parts, technological equipment and other entities with links to the operation of the water treatment plant. All these data were sorted for better overview and facilitate setting evaluation indicators. The third part of this thesis is focused on the development of indicators that are used to determine the current status of the water treatment plant. As a first step was established 19 indicators used to evaluate the condition of the entire water treatment plant. Followed by a description of the individual indicators and then determine the individual evaluation criteria. In the last part of this thesis was carried out by the proposed criteria on selected water treatment plants. They were selected three water treatment plants located in the Czech Republic, which held a personal tour of each water treatment plant. This was followed by an overall assessment of the technical condition of water treatment plants.

The aim of this thesis is design of an apartment building for students. The design is in the range of the documentation for designing building construction based on the decree 499/2006 Sb. as amended by decree 62/2013 Sb. The building is situated on the plots 1220, 1219/1, 1218/11 and 1218/2 in the cadastral area „Letovice“. The new building is designed to accommodate students for year-round occupancy. There is a dining room for staying students and students from nearby schools as well. In the new building are also multimedia classrooms, library, reading rooms, club rooms, gym and lecture hall available for students. In the building are 30 rooms. The capacity of the building is designed to accommodate 81 students. The building has three floors, a loft and no basement. Masonry is designed from clay blocks and floor slab is designed as a cast-in-place reinforced concrete floor structure.

<p>We make decisions every day, some with the potential for a huge impact on our lives. This process of decision-making is crucial not only for individuals but for industries, including construction. Unlike the manufacturing industry, where one can make certain decisions regarding an actual product by looking at it in real time, the nature of construction is different. Here, decisions are to be made on a product which will be built somewhere in the near future. The complex and interim nature of construction projects, along with factors like time essence, increasing scale of projects and multitude of stakeholders, makes it even more difficult to reach consensus. Incorporating VR can aid in getting an insight on the final product at the very beginning of the project life cycle. With a visual representation, the stakeholders involved can collaborate on a single platform to assess the project, share common knowledge and make choices that would produce better results in all major aspects like cost, quality, time and safety. This study aims at assessing decision-making in the earlier stages of construction and then evaluating the performance of immersive and non-immersive VR platforms.</p> <br> <p> </p>

Lergjord is a thesis that puts emphasis on the possibility of innovation by using local biobased material in the building industry of Skåne in Sweden. The thesis examines if rammed earth can be used in the implementation of LFM30 (Translated into English: Local Sustainable Goals in Malmö by 2030). By use of qualitative research methods, views on rammed earth as a building technique was explored by three stakeholders. This research has concluded if rammed earth is possible in Skåne as a conventional material in the future. We (Ludvig Dovberg and Tobias Löfgren) have examined the practical aspect of rammed earth on Urban Living Lab in the municipality of Lund by the use of local clay material from excavation for an expansion of a new railway between Malmö and Lund in collaboration with Trafikverket. This thesis concludes that rammed earth is feasible with clay from the excavation masses through project LERGJORD. Also, due to the vast quantity of it the resource might be useful for future rammed earth projects in Skåne. However, the building technique itself has some major drawbacks such as time-consumption and the knowledge gap is easily addressed. Although, there has been a development of a pre-fabrication concept of the building technique in Germany since the late 1990s, that could be a solution to the problem. The thesis also concludes that  higher education and research is compulsory to establish a knowledge base for architects to work by. The case study showcased that a standardization of the material is needed to prevent vast material testing before being accepted for construction, like the Lehmbau-praxis in Germany. According to the material’s low impact in CO₂-emission and circularity this resourceful extraction could be of interest by the members of LFM30 to implement in the building industry of Skåne. / Lergjord är ett arbete som undersöker möjligheten till innovation genom att utnyttja lokala biobaserade material i Skåne i Sverige. Arbetet undersöker om stampad jordbyggnad kan användas för att genomföra de Lokala Färdplansmålen som Malmö Stad sätter fram till år 2030 (förk. LFM30). Genom kvalitativa forskningsmetoder undersöktes stampad lerjord som byggnadsteknik hos tre intressenter. Studien har sammanfattat möjligheten om hur stampad lerjord i Skåne kan bli ett konventionellt byggmaterial i framtiden. Vi (Ludvig Dovberg och Tobias Löfgren) har utvärderat den praktiska aspekten i stampad lerjord på Urban Living Lab i Lund med användandet av lokal lerjord från utgrävningar av tillbyggnation för järnvägsspår mellan Malmö och Lund i samarbete med Trafikverket. Arbetet visar att stampjordstekniken är möjlig med utvunnen lera från schaktmassorna mellan Lund och Malmö med hänvisning till projekt LERGJORD. Med tanke på den stora kvantitet av lera som finns kan denna utvinning vara användbar för andra projekt i Skåne. Hursomhelst, byggtekniken besitter på utmaningar såsom tidskrav och kunskapsluckan är tämligen lätt att adressera. Trots det, har ett prefabriceringskoncept inom byggtekniken utvecklats sedan slutet på 1990-talet i Tyskland, som kan vara en lösning på problemet. Arbetet tyder också på att högre utbildning och forskning krävs för att etablera en kunskapsbas som arkitekter kan arbeta vidare på. Fallstudien visar på att en standardisering av materialet krävs för att undvika långa och omständliga materialtester innan godkännande för konstruktion, likt Lehmbau-lagstiftningen i Tyskland. Materialets låga klimatpåverkan och cirkularitet gör det relevant för LMF30’s medlemmar att se vidare på alternativet för implementering i den skånska byggindustrin.

The thesis is focused on creating of aggregated items and pricing appreciation of the group works. This thesis deals with in its early life cycle of building works and defines at what stage it is advisable to use the aggregate cost. The following part is aimed at budget in the aggregated prices and creating aggregated prices. In practical part there is methodology designed to compile aggregate price of building construction. The aim of methodology is to propose evaluation process of coherent construction work groups. The proposed methodology will be used to value case study of family house.