<p>The Swedish truck industry is forced to find new material solutions to achieve lighter engines with increased strength. Customers and new environmental regulations demand both higher specific power and more environmentally friendly trucks, and this places a rising pressure on the manufactures. This demand could be met by increasing the peak pressure in the cylinders. Consequently, a more efficient combustion is obtained and the exhaust lowered. This however exposes the engine to higher loads and material physical properties must therefore be enhanced.</p><p>Today, alloyed gray iron is the predominantly used engine material. This material cannot meet the requirements of tomorrow’s engines. Compacted Graphite Iron has good potential to be the replacement; it opens new design opportunities with its superior strength, which can lead to smaller, more efficient engines and additional power. The question is: how will manufacturing be affected?</p><p>The main goal of this thesis is to identify and investigate the main factors’ effect and their individual contributions on CGI machining.  When the relationship between the fundamental features; machinability, material microstructure, and material physical properties, are revealed, then the CGI material can be optimized, both regarding the manufacturing process and design requirements. The basic understanding is developed mainly through experimental analysis. No attempt has been made to optimize the material to be used as engine material in this thesis.</p><p>The thesis demonstrates the importance of having good casting process control. It also illustrates the microstructural properties’ effects on CGI machinability, and what new aspects of machining must be taken into account, compared to gray iron.</p> / OPTIMA CGI

Die Arbeit diskutiert Lösungsvarianten und beschreibt die Implementation eines Prototyps zur Re-Organisation der Nutzerverwaltung des URZ. Besondere Schwerpunkte liegen auf der Erstellung eines Web-Interfaces zur Datenverwaltung und auf der Untersuchung relationaler Datenbanksysteme hinsichtlich der Eignung zur Lösung der Aufgabe. Der Prototyp stellt lediglich eine beispielhafte Implementierung einiger Teilkomplexe des Gesamtsystems dar.

Die Arbeit diskutiert Lösungsvarianten und beschreibt die Implementation eines Prototyps zur Re-Organisation der Nutzerverwaltung des URZ. Besondere Schwerpunkte liegen auf der Erstellung eines Web-Interfaces zur Datenverwaltung und auf der Untersuchung relationaler Datenbanksysteme hinsichtlich der Eignung zur Lösung der Aufgabe. Der Prototyp stellt lediglich eine beispielhafte Implementierung einiger Teilkomplexe des Gesamtsystems dar.

In this thesis the argument of a new visual language as a narrative device will be discussed and looked at, by analyzing four different TV-series in the science-fiction genre: Terra Nova 2011, Defiance 2013-, Doctor Who 1963 – 1989 and Doctor Who 2005-. It will be possible to see the use of digital visual effects as a narrator in the image. To do this one main question has been asked and to be able to answer that question a framework model has been created, consisting of seven different questions: How are DVFx used as a visual language in the TV-series? What key elements drive the TV-series forward? What influence did DVFx have on the TV-series? How is DVFx used in the series as a narrator? What does DVFx represent in the image? Could the series have been created without DVFx? Techno-enhancement, visual language or hybrid?

Lamellar graphite iron (LGI) is commonly used in diesel engine applications such as piston rings–cylinder liner where an excellent combination of physical and tribological properties is essential to avoid scuffing and bore polishing issues. The excellent tribological behaviour of LGI alloys is related to the graphite lamellas, which act as solid lubricant agents by feeding onto the tribosurfaces under sliding conditions. However, increasingly tighter emissions and fuel economy legislations and the higher demands on enhanced power and durability have encouraged both engine designers and manufacturers to introduce pearlitic compacted graphite irons (CGI) as an alternative material replacing LGI, although the poor machinability of pearlitic CGI alloys compared to the LGI remains a challenge. The focus of this study is placed on investigating how the microstructure of LGI and CGI alloys affects their mechanical and tribological properties. This was initially undertaken by investigating representative, worn lamellar cast iron piston rings taken from a two-stroke large-bore heavy-duty diesel engine. As known that it is tribologically essential to keep the graphite open under sliding conditions, in particular under starved lubrication regimes or unlubricated conditions to avoid scuffing issues; however, this study revealed the closure of a majority of graphite lamellas; profoundly for those lamellas that were parallel to sliding direction; due to the severe matrix deformation caused by abrasion. Both microindentation and microscratch testing, which were used to crudely simulate the abrasion under starved lubricated condition in combustion chamber, suggested a novel mechanism of activating the graphite lamellas to serve as lubricating agents in which the matrix deformation adjacent to the graphite initially resulted in fracturing and then extrusion of the graphite lamellas. Additionally, in order to investigate the relation between matrix constituents, mechanical properties and machinability of cast iron materials, solution-strengthened CGI alloys were produced with different levels of silicon and section thicknesses. The results showed significant improvements in mechanical properties and machinability while deteriorating the ductility. Moreover, multiple regression analysis, based on chemical composition and microstructural characteristics was used to model the local mechanical properties of high Si ferritic CGI alloys, followed by implementing the derived models into a casting process simulation which enables the local mechanical properties of castings with complex geometries. Very good agreement was observed between the measured and predicted microstructure and mechanical properties.

Remote experimentation and control have led researchers to develop new technologies as well as implement existing techniques. The multidisciplinary nature of research in electromechanical systems has led to the synergy of mechanical engineering, electrical engineering and computer science. This work describes the design of a model of a Gantry Mechanism, which maneuvers a web-cam. The user controls virtually the position of end-effecter of the Gantry Mechanism using a Graphical User Interface. The GUI is accessed over the Internet. In order to reduce the unbalanced vibrations of the Gantry Mechanism, we investigate the development of an algorithm of input shaping. A model of the Gantry Mechanism is built, and it is controlled over the Internet to view experimentation of the SCARA Robot. The system performance is studied by comparing the inputs such as distances and angles with outputs, and methods to improve the performance are suggested.

Remote experimentation and control have led researchers to develop new technologies as well as implement existing techniques. The multidisciplinary nature of research in electromechanical systems has led to the synergy of mechanical engineering, electrical engineering and computer science. This work describes the design of a model of a Gantry Mechanism, which maneuvers a web-cam. The user controls virtually the position of end-effecter of the Gantry Mechanism using a Graphical User Interface. The GUI is accessed over the Internet. In order to reduce the unbalanced vibrations of the Gantry Mechanism, we investigate the development of an algorithm of input shaping. A model of the Gantry Mechanism is built, and it is controlled over the Internet to view experimentation of the SCARA Robot. The system performance is studied by comparing the inputs such as distances and angles with outputs, and methods to improve the performance are suggested.

Gemeinsamer Workshop von Universitaetsrechenzentrum und Professur Rechnernetze und verteilte Systeme (Fakultaet fuer Informatik) der TU Chemnitz. Workshop-Thema: Infrastruktur der ¨Digitalen Universitaet¨ Es gibt viele Möglichkeiten, dynamische Web Inhalte zu erzeugen. Dieser Vortrag soll einen Überblick über Erweiterungsmöglichkeiten auf der Serverseite geben. Mit Hinblick auf Performance werden im Vergleich zum CGI eingebettete Interpreter beleuchtet und spezielle Scriptsprachen wie PHP,Perl oder Tcl genannnt.

In recent years Crowdsourced, or Volunteered, Geographic Information (CGI, VGI), has emerged as a large, up-to-date and easily accessible data source. Primarily attributable to the rise of the Geoweb and widespread use of location enabled technologies, this environment of widespread innovation has repositioned the role of consumers of spatial information. Collaborative and participatory web environments have led to a democratisation of the global mapping process, and resulted in a paradigm shift to the consumer of geographic data also acting as a data producer. With such a large and diverse group of participants actively mapping the globe, the resulting flood of information has become increasingly attractive to authoritative mapping agencies, in order to augment their own spatial data supply chains. The use of CGI would allow these agencies to undertake continuous improvement of their own data and products, adding a dimension of currency that has previously been unattainable due to high associated costs. CGI, however, through its diversity of authorship, presents a quality assurance risk to these agencies should it be included in their authoritative products. Until now, this risk has been insurmountable, with CGI remaining a “Pandora’s Box” which many agencies are reluctant to open. This research presents an algorithmic model that overcomes these issues, by quantifying trust in CGI in order to assess its implied quality. Labeled “VGTrust”, this model assesses information about a data author, its spatial trust, as well as its temporal trust, in order to produce an overall metric that is easy to understand and interpret. The VGTrust model will allow mapping agencies to harness CGI to augment existing datasets, or create new ones, thereby facilitating a targeted quality assurance process and minimizing risk to authoritativeness. This research proposes VGTrust in theory, on the basis of existing examinations of trust issues with CGI. Furthermore, a facilitated case study, “Building Our Footprints” is presented, where VGTrust is deployed to facilitate the capture of a building footprint dataset, the results of which revealing the veracity of the model as a measure to assess trust for these data. Finally, a data structure is proposed in the form of a “geo-molecule”, which allows the full spectrum of trust indicators to be stored a data structure at feature level, allowing the transitivity of this information to travel with each feature following creation. By overcoming the trust issues inherent in CGI, this research will allow the integration of crowdsourced and authoritative data, thereby leveraging the power of the crowd for productive and innovative re-use.

Compacted graphite iron (CGI) is rapidly becoming an attractive alternative material for engine components in the automotive industry, replacing lamellar graphite iron (LGI) in applications where high mechanical strength is desired. However, the gain in mechanical strength comes with a cost; thermal conductivity, process control and machining are three areas that are more challenging for CGI. This generates a need for research regarding various aspects concerning CGI. In this thesis the microstructure formation during solidification and solid state transformation will be the focus of interest. The phase transformations relevant for microstructure formation of importance to properties in CGI were studied. Experiments were performed in an industrial foundry giving this research direct relevance to regular production of CGI castings. Solidification of the grey (graphite/austenite) eutectic will be discussed, focusing on some relevant aspects influencing the graphite morphology of CGI. The formation of graphite nodules has been investigated by studying colour-etched microstructures. In a material containing mainly CGI cells it was found that nodules form either early during solidification as a consequence of high undercooling or late in the solidification sequence due to a combination of high undercooling and segregation of nodularising elements. Solidification of the white (cementite/austenite) eutectic was studied using chill wedges and the influence of some alloying elements on the amount of carbides was examined. To further enhance the understanding of carbide formation in CGI a commercial casting simulation software was used to correlate real castings to simulations. It was found that the alloying elements investigated influence the carbide formation in a similar way as in other graphitic cast irons and that high nodularity CGI is more prone to chill formation than low nodularity CGI. The solid state transformation was studied and a deterministic model was developed. The model divides a eutectic cell into layers, in order to take into account segregation of alloying elements, which was observed to be influential for the ferrite growth. Moreover, the effect of alloying elements on mechanical properties (tensile properties and hardness) was evaluated. Properties were correlated to microstructural features originating from both solidification and solid state transformations. The trends found generally confirmed previous results regarding properties in graphitic cast irons.