No description available.

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / This paper describes and interference cancellation technique appropriate for ARTM Tier-1 waveforms. The technique requires the estimators for the bit sequences for the adjacent channels as well as the power levels of the adjacent channels. Simulation results show that the interference canceller allows a more dense “channel packing” thereby creating a channel utilization 67% ~ 100% greater than the current IRIG 106 recommendations.

In the US, the 14.0-14.5 GHz band is allocated on a primary basis to the Radio-Navigation and the FSS with a secondary allocation to the LMSS. The Radio-Navigation service is the use of RADAR for navigation. An example of Radio-Navigation is the ground proximity radar used for airplane collision avoidance. FSS stands for the Fixed Satellite Service. In general, an FSS is a satellite network consisting of a geo-stationary satellite and non-movable earth stations on the ground. An example of an FSS is the earth terminals used at gas stations to verify credit cards and centrally track inventory. The 14.0-14.5 GHz band is also allocated on a secondary basis to the LMSS or Land Mobile Satellite Service. This is a satellite network with a satellite and a movable terrestrial non-aeronautical earth station. An example of an LMSS is a system called Omnitracs, which provides a satellite-based data connection for the trucking industry. AMSS stands for the Aeronautical Mobile Satellite Service. An AMSS is an LMSS dedicated only to airplanes. The CPM or Conference Preparatory Meeting after WRC or World Radio Conference-2000 decided there was an urgent need for technical and regulatory studies covering sharing between the FSS and the AMSS. The requirement for a report on the studies was added to the WRC-2003 agenda. The WRC also stipulated that the studies must demonstrate that sharing between the FSS and the AMSS is feasible enough to allocate AMSS a secondary status in the band. The studies need to be completed before WRC-2003. AMSS contends that sharing is feasible if their service can meet the same PFD limits of the LMSS. Presently, the FCC has licensed the AMSS on an experimental non-interference basis. The FSS contends that characteristics are needed of the AMSS system and a detailed sharing study be completed to verify sharing is feasible. The FSS believes that sharing may not be feasible if the same transponder is used for AMSS and FSS. The FSS perceives that the AMSS is asking for a super secondary status. Super secondary status implies that the AMSS would only be required to adhere to PFD limits on individual aircraft and not for multiple aircraft in view of a victim FSS receiver. Future studies will clarify this issue. The issues associated with the sharing analysis are; the modeling of the orbital separation of the satellites, the atmospheric interference into the communication link and the availability of the communication link between the FSS and the AMSS. The issues associated with modeling of the simulation are the static, verses dynamic modeling environments and developing a dynamic software tool to track airplane movement. This thesis plans to propose a new sharing methodology between the FSS and the AMSS that could be contributed to the WRC-2003 agenda. Three systems examples were provided at ITU meetings inresponse to the WRC-2003 agenda item. The three systems will abide by the ITU-R S.728 EIRP limits. The three systems indicate that static analysis shows that sharing is feasible involving only one aircraft as the interfere. This is not a reasonable solution for a real time environment because there is only one aircraft used. It is necessary for the link to support multiple aircraft. The factors that indicate sharing is feasible are: non-harmful interference to the victim and reasonable enough link margin in the interfere system to make it viable. A viable system in the case of aircraft would include high-speed internet and video. The AMSS interfere system cannot propose a power limit that will not allow it to close it's own link. In order to mitigate the interference, systems can agree to certain interference mitigation techniques. The different techniques are: transmitting power control, geostationary arc avoidance angle and orbital arc separation. Power control as described above is the centralized control of the interfering antenna into the victim. This is done by simulating the interference environment and pre-scheduling the decreases of the transmitting power. This is a feasible solution except that it decreases the availability and thru-put of the interfere system. This approach can make the system have unrealistic link margins and spotty availability due to the pre-scheduled power control. Another technique is the geostationary arc avoidance angle. This technique is not applicable since both the AMSS and FSS use geostationary orbits. The third technique is geostationary separation. This technique requires co-channel systems to maintain a certain orbital spacing between them. FSS systems in certain bands have a minimum of 3 degrees of orbital spacing between co-channel systems. Since the AMSS has 01/25/03 a mobile terrestrial system (aircraft) as part of the link, it requires a higher orbital separation between it and the FSS system. The results of dynamic analysis indicate that this technique is feasible at 10 degree orbital spacing. The Monte Carlo analysis completed for this thesis simulated the results of four scenarios: co-located, 3 degree, and 5 and 10-degree orbital separation. It can be determined from the results that the interference decreases as the orbital separation increases. These simulations were done based on a 10 aircraft interfere scenario. / Master of Science

Co-channel interference limits the capacity of cellular systems, reduces the throughput of wireless local area networks, and is the major hurdle in deployment of high altitude communication platforms. It is also a problem for systems operating in unlicensed bands such as the 2.4 GHz ISM band and for narrowband systems that have been overlaid with spread spectrum systems. In this work we have developed model-based techniques for the demodulation of co-channel MSK signals. It is shown that MSK signals can be written in the linear model form, hence a minimum variance unbiased (MVU) estimator exists that satisfies the Cramer-Rao lower bound (CRLB) with equality. This framework allows us to derive the best estimators for a single-user and a two-user case. These concepts can also be extended to wideband signals and it is shown that the MVU estimator for Direct Sequence Spread Spectrum signals is in fact a decorrelator-based multiuser detector. However, this simple linear representation does not always exist for continuous phase modulations. Furthermore, these linear estimators require perfect channel state information and phase synchronization at the receiver, which is not always implemented in wireless communication systems. To overcome these shortcomings of the linear estimation techniques, we employed an autoregressive modeling approach. It is well known that the AR model can accurately represent peaks in the spectrum and therefore can be used as a general FM demodulator. It does not require knowledge of the exact signal model or phase synchronization at the receiver. Since it is a non-coherent reception technique, its performance is compared to that of the limiter discriminator. Simulation results have shown that model-based demodulators can give significant gains for certain phase and frequency offsets between the desired signal and an interferer. / Master of Science

International Telemetering Conference Proceedings / October 22-25, 2001 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper will present measured data in an adjacent channel interference (ACI) environment for both filtered continuous phase frequency shift keying (CPFSK) and Feher’s patented quadrature phase shift keying (FQPSK-B) [1]. The quantity measured was bit error probability (BEP) versus signal energy per bit to noise power spectral density ratio (E(b)/N(o)). The interferers were either CPFSK or FQPSK-B signals. The results presented in this paper will be for bit rates of 5 Mb/s, one interferer 20 dB larger than desired signal, various channel spacings, and two different telemetry receivers. The ACI test effort will collect data sets at several bit rates and with one and two interferers. The results will be useful to system designers and range operators as they attempt to maximize the number of Mb/s that can be simultaneously transmitted in the telemetry bands.

RF front-ends are nonlinear systems that have nonlinear frequency response and, hence, can impair receiver performance by harmful adjacent channel interference in non-intuitive ways. Next generation wireless networks will see unprecedented diversity across receiver and radio technologies accessing the same band of spectrum in spatio-temporal proximity. Ensuring adjacent channel co-existence is of prime importance for successful deployment and operations of next generation wireless networks. Vulnerabilities of receiver front-end can have a severe detrimental effect on network performance and spectrum co-existence. This dissertation addresses the technological challenges in understanding and accounting for receiver sensitivities in the design of next generation wireless networks. The dissertation has four major contributions. In the first contribution, we seek to understand how receiver nonlinearity impacts performance. We propose a computationally efficient framework to evaluate the adjacent channel interference in a given radio/spectrum environment. We develop novel tractable representation of receiver front-end nonlinearity to specify the adjacent channel signals that contribute to the interference at the desired channel and the total adjacent channel interference power at a given desired channel. In the second contribution, we seek to understand how the impact of receiver nonlinearity performance can be quantified. We quantify receiver performance in the presence of adjacent channel interference using information theoretic metrics. We evaluate the limits on achievable rate accounting for RF front-end nonlinearity and provide a framework to compare disparate receivers by forming generalized metrics. In the third contribution, we seek to understand how the impact of receiver nonlinearity can be managed at the network level. We develop novel and comprehensive wireless network management frameworks that account for the RF nonlinearity, impairments, and diversity of heterogeneous wireless devices. We further develop computationally efficient algorithms to optimize the proposed framework and examine network level performance. We demonstrate through extensive network simulations that the proposed receiver-centric frameworks provide substantially high spectrum efficiency gains over receiver-agnostic spectrum access in dense and diverse next generation wireless networks. In the fourth contribution, we seek to understand how scalable interference networks are with receiver nonlinearity. We propose practical achievable schemes for interference avoidance and assess the scalability of the next generation wireless networks with interference due to receiver nonlinearity. Further, we develop an algorithmic scheme to evaluate the upper bound on scalability of nonlinear interference networks. This provides valuable insights on scalability and schemes for nonlinear adjacent channel interference avoidance in next generation shared spectrum networks. / Ph. D. / There has been a dramatic increase in the demand for mobile data, since the introduction of smartphones. Over the air transmission of data utilizes a natural resource called radio frequency spectrum. The efficient utilization of the radio frequency spectrum and clever wireless network management is key for satisfying this demand. Besides improving the quality of wireless services, efficient spectrum utilization will also have profound economic benefits and spur growth. It has been shown that spectrum is most efficiently used when shared among various services rather than licensed to specific users and communication systems. This implies that next generation wireless networks will comprise of diverse types of wireless devices. Thus, network design and regulation should ensure their harmonious co-existence. However, the practicality of spectrum sharing technology and regulation is still in its infancy. In particular, the effect of radio receiver performance and vulnerabilities from signals in the spectral neighborhood on spectrum regulation and management is not well understood. A detailed study and analysis of this is of paramount importance spectrum sharing and regulation in next generation wireless networks. In this dissertation we develop the fundamentals, limitations, and management strategies on the impact of receiver performance on efficient spectrum access and co-existence. In addition, this key insights to maximize network efficiency in next generation wireless systems are presented. The outcome of this dissertation will aid in developing frameworks to increase social awareness about low-quality wireless devices and their implications on capacity. In summary, this dissertation provides a the necessary foundations to understand, design, and optimize the next generation wireless networks, which will have far reaching economic and social benefits.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / This paper will provide recommended channel spacing requirements when the Tactical Targeting Network Technology (TTNT) System is utilized in conjunction with airborne telemetry systems at airborne test ranges. The recommendation will be in the form of an equation similar in form to the adjacent channel interference (ACI) equation currently in the Telemetry Standard IRIG-106. Test results will be presented to support this recommendation.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / This paper provides an introduction to the Orthogonal Frequency Division Multiplexing (OFDM) scheme which has been proposed for future aeronautical telemetry applications. OFDM offers the potential for high data rates on radio channels with multipath such as aeronautical telemetry channels. This paper provides in introduction to OFDM and demonstrates how orthogonality is maintained over multipath channels by the introduction of a guard band and by the inclusion of a cyclic prefix. The simulation of OFDM in multipath is simulated and performance results are presented that show the degradation of this scheme on a multipath channel with and without the guard band and the cyclic prefix.

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / In this paper we describe a new method that is applicable to mitigating both multipath interference and adjacent channel interference (ACI) in aeronautical telemetry applications using ARTM Tier-1 waveforms. The proposed method uses a linear equalizer that is derived using Kalman filtering theory, which has been used for channel equalization for high-speed communication systems. We illustrate the proposed method with numerical examples obtained from simulations that show the bit error rate performance (BER) for different modulation schemes.

International Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevada / This paper will present equations for calculating the minimum recommended frequency separation of two digital telemetry signals. The signals can be filtered continuous phase frequency shift keying (CPFSK), multi-h continuous phase modulation (CPM) [1], shaped offset quadrature phase shift keying-Telemetry Group (SOQPSK-TG, aka SOQPSK-A*) [2], or Feher’s patented quadrature phase shift keying FQPSK-B (or FQPSK-JR [3]). The equations are based on measured data in an adjacent channel interference (ACI) environment for filtered CPFSK (aka PCM/FM), multi-h CPM (or CPM for short), SOQPSK-TG, FQPSK-JR, and FQPSK-B. This paper is an extension of my 2001 and 2002 International Telemetering Conference papers on this topic [4, 5]. The quantity measured was bit error probability (BEP) versus frequency separation at a given signal energy per bit to noise power spectral density ratio (Eb/No). The interferers were CPFSK, CPM, SOQPSK-TG or FQPSK-B (-JR) signals. The results presented in this paper will be for a desired signal bit rate of 1 to 20 Mb/s, one interferer 20 dB larger than the desired signal (a few tests included two interferers), and various center frequency spacings, interfering signals, receivers, and demodulators. The overall ACI test effort has collected data sets at several bit rates and with one and two interferers. The results will be useful to system designers and range operators as they attempt to maximize the number of Mb/s that can be simultaneously transmitted with minimal interference in the telemetry bands.