Face à une demande sans cesse croissante de haut débit et d’adaptabilité des systèmes existants, qui à son tour se traduit par l’encombrement du spectre, le développement de nouvelles solutions dans le domaine des communications sans fil devient nécessaire afin de répondre aux exigences des applications émergentes. Parmi les innovations récentes dans ce domaine, l’ultra large bande (UWB) a suscité un vif intérêt. La radio impulsionnelle UWB (IR-UWB), qui est une solution intéressante pour réaliser des systèmes UWB, est caractérisée par la transmission des impulsions de très courte durée, occupant une largeur de bande allant jusqu’à 7,5 GHz, avec une densité spectrale de puissance extrêmement faible. Cette largeur de bande importante permet de réaliser plusieurs fonctionnalités intéressantes, telles que l’implémentation à faible complexité et à coût réduit, la possibilité de se superposer aux systèmes à bande étroite, la diversité spatiale et la localisation très précise de l’ordre centimétrique, en raison de la résolution temporelle très fine.Dans cette thèse, nous examinons certains éléments clés dans la réalisation d'un système IR-UWB intelligent. Nous avons tout d’abord proposé le concept de radio UWB cognitive à partir des similarités existantes entre l'IR-UWB et la radio cognitive. Dans sa définition la plus simple, un tel système est conscient de son environnement et s'y adapte intelligemment. Ainsi, nous avons tout d’abord focalisé notre recherché sur l’analyse de la disponibilité des ressources spectrales (spectrum sensing) et la conception d’une forme d’onde UWB adaptative, considérées comme deux étapes importantes dans la réalisation d'une radio cognitive UWB. Les algorithmes de spectrum sensing devraient fonctionner avec un minimum de connaissances a priori et détecter rapidement les utilisateurs primaires. Nous avons donc développé de tels algorithmes utilisant des résultats récents sur la théorie des matrices aléatoires, qui sont capables de fournir de bonnes performances, avec un petit nombre d'échantillons. Ensuite, nous avons proposé une méthode de conception de la forme d'onde UWB, vue comme une superposition de fonctions B-splines, dont les coefficients de pondération sont optimisés par des algorithmes génétiques. Il en résulte une forme d'onde UWB qui est spectralement efficace et peut s’adapter pour intégrer les contraintes liées à la radio cognitive. Dans la 2ème partie de cette thèse, nous nous sommes attaqués à deux autres problématiques importantes pour le fonctionnement des systèmes UWB, à savoir la synchronisation et l’estimation du canal UWB, qui est très dense en trajets multiples. Ainsi, nous avons proposé plusieurs algorithmes de synchronisation, de faible complexité et sans séquence d’apprentissage, pour les modulations BPSK et PSM, en exploitant l'orthogonalité des formes d'onde UWB ou la cyclostationnarité inhérente à la signalisation IR-UWB. Enfin, nous avons travaillé sur l'estimation du canal UWB, qui est un élément critique pour les récepteurs Rake cohérents. Ainsi, nous avons proposé une méthode d’estimation du canal basée sur une combinaison de deux approches complémentaires, le maximum de vraisemblance et la décomposition en sous-espaces orthogonaux,d’améliorer globalement les performances. / Faced with an ever increasing demand of high data-rates and improved adaptability among existing systems, which inturn is resulting in spectrum scarcity, the development of new radio solutions becomes mandatory in order to answer the requirements of these emergent applications. Among the recent innovations in the field of wireless communications,ultra wideband (UWB) has generated significant interest. Impulse based UWB (IR-UWB) is one attractive way of realizing UWB systems, which is characterized by the transmission of sub nanoseconds UWB pulses, occupying a band width up to 7.5 GHz with extremely low power density. This large band width results in several captivating features such as low-complexity low-cost transceiver, ability to overlay existing narrowband systems, ample multipath diversity, and precise ranging at centimeter level due to extremely fine temporal resolution.In this PhD dissertation, we investigate some of the key elements in the realization of an intelligent time-hopping based IR-UWB system. Due to striking resemblance of IR-UWB inherent features with cognitive radio (CR) requirements, acognitive UWB based system is first studied. A CR in its simplest form can be described as a radio, which is aware ofits surroundings and adapts intelligently. As sensing the environment for the availability of resources and then consequently adapting radio’s internal parameters to exploit them opportunistically constitute the major blocks of any CR, we first focus on robust spectrum sensing algorithms and the design of adaptive UWB waveforms for realizing a cognitive UWB radio. The spectrum sensing module needs to function with minimum a-priori knowledge available about the operating characteristics and detect the primary users as quickly as possible. Keeping this in mind, we develop several spectrum sensing algorithms invoking recent results on the random matrix theory, which can provide efficient performance with a few number of samples. Next, we design the UWB waveform using a linear combination of Bsp lines with weight coefficients being optimized by genetic algorithms. This results in a UWB waveform that is spectrally efficient and at the same time adaptable to incorporate the cognitive radio requirements. In the 2nd part of this thesis, some research challenges related to signal processing in UWB systems, namely synchronization and dense multipath channel estimation are addressed. Several low-complexity non-data-aided (NDA) synchronization algorithms are proposed for BPSK and PSM modulations, exploiting either the orthogonality of UWB waveforms or theinherent cyclostationarity of IR-UWB signaling. Finally, we look into the channel estimation problem in UWB, whichis very demanding due to particular nature of UWB channels and at the same time very critical for the coherent Rake receivers. A method based on a joint maximum-likelihood (ML) and orthogonal subspace (OS) approaches is proposed which exhibits improved performance than both of these methods individually.

In recent years, the increase in the population of mobile users and the advances in computational capabilities of mobile devices have led to an exponentially increasing traffic load on the wireless networks. This trend is foreseen to continue in the future due to the emerging applications such as cellular Internet of things (IoT) and machine type communications (MTC). Since the spectrum resources are limited, the only promising way to keep pace with the future demand is through aggressive spatial reuse of the available spectrum which can be realized in the networks through dense deployment of small cells. There are many challenges associated with such densely deployed heterogeneous networks (HetNets). The main challenges which are considered in this research work are capacity enhancement, velocity estimation of mobile users, and energy efficiency enhancement. We consider different approaches for capacity enhancement of the network. In the first approach, using stochastic geometry we theoretically analyze time domain inter-cell interference coordination techniques in a two-tier HetNet and optimize the parameters to maximize the capacity of the network. In the second approach, we consider optimization of the locations of aerial bases stations carried by the unmanned aerial vehicles (UAVs) to enhance the capacity of the network for public safety and emergency communications, in case of damaged network infrastructure. In the third approach, we introduce a subsidization scheme for the service providers through which the network capacity can be improved by using regulatory power of the government. Finally, we consider the approach of device-to-device communications and multi-hop transmissions for enhancing the capacity of a network. Velocity estimation of high speed mobile users is important for effective mobility management in densely deployed small cell networks. In this research, we introduce two novel methods for the velocity estimation of mobile users: handover-count based velocity estimation, and sojourn time based velocity estimation. Using the tools from stochastic geometry and estimation theory, we theoretically analyze the accuracy of the two velocity estimation methods through Cramer-Rao lower bounds (CRLBs). With the dense deployment of small cells, energy efficiency becomes crucial for the sustained operation of wireless networks. In this research, we jointly study the energy efficiency and the spectral efficiency in a two-tier HetNet. We optimize the parameters of inter-cell interference coordination technique and study the trade-offs between the energy efficiency and spectral efficiency of the HetNet.

Desde comienzos del siglo XXI, los sistemas de radiodifusión terrestre han sido culpados de un uso ineficiente del espectro asignado. Para aumentar la eficiencia espectral, los organismos de estandarización de TV digital comenzaron a desarrollar la evolución técnica de los sistemas de TDT de primera generación. Entre otros, uno de los objetivos principales de los sistemas de TDT de próxima generación (DVB-T2 y ATSC 3.0) es proporcionar simultáneamente servicios de TV a dispositivos móviles y fijos. El principal inconveniente de esta entrega simultánea son los diferentes requisitos de cada condición de recepción. Para abordar estas limitaciones, se han considerado diferentes técnicas de multiplexación. Mientras que DVB-T2 acomete la entrega simultánea de los dos servicios mediante TDM, ATSC 3.0 adoptó la Multiplexación por División en Capas (LDM). LDM puede superar a TDM y a FDM al aprovechar la relación de Protección de Error Desigual (UEP), ya que ambos servicios, llamados capas, utilizan todos los recursos de frecuencia y tiempo con diferentes niveles de potencia. En el lado del receptor, se distinguen dos implementaciones, de acuerdo con la capa a decodificar. Los receptores móviles solo están destinados a obtener la capa superior, conocida como Core Layer (CL). Para no aumentar su complejidad en comparación con los receptores de capa única, la capa inferior, conocida como Enhanced Layer (EL), es tratada como un ruido adicional en la decodificación. Los receptores fijos aumentan su complejidad, ya que deben realizar un proceso de Cancelación de Interferencia (SIC) sobre la CL para obtener la EL. Para limitar la complejidad adicional de los receptores fijos, las capas de LDM en ATSC 3.0 están configuradas con diferentes capacidades de corrección, pero comparten el resto de bloques de la capa física, incluido el TIL, el PP, el tamaño de FFT, y el GI. Esta disertación investiga tecnologías avanzadas para optimizar el rendimiento de LDM. Primero se propone una optimización del proceso de demapeo para las dos capas de LDM. El algoritmo propuesto logra un aumento de capacidad, al tener en cuenta la forma de la EL en el proceso de demapeo de la CL. Sin embargo, el número de distancias Euclidianas a computar puede aumentar significativamente, conduciendo no solo a receptores fijos más complejos, sino también a receptores móviles más complejos. A continuación, se determina la configuración de piloto ATSC 3.0 más adecuada para LDM. Teniendo en cuenta que las dos capas comparten el mismo PP, surge una contrapartida entre la densidad de pilotos (CL) y la redundancia sobre los datos (EL). A partir de los resultados de rendimiento, se recomienda el uso de un PP no muy denso, ya que ya han sido diseñados para hacer frente a ecos largos y altas velocidades. La amplitud piloto óptima depende del estimador de canal en los receptores (ej., se recomienda la amplitud mínima para una implementación Wiener, mientras que la máxima para una implementación FFT). También se investiga la potencial transmisión conjunta de LDM con tres tecnologías avanzadas adoptadas en ATSC 3.0: las tecnologías de agregación MultiRF, los esquemas de MISO distribuido y los de MIMO colocalizado. Se estudian los potenciales casos de uso, los aspectos de implementación del transmisor y el receptor, y las ganancias de rendimiento de las configuraciones conjuntas para las dos capas de LDM. Las restricciones adicionales de combinar LDM con las tecnologías avanzadas se consideran admisibles, ya que las mayores demandas ya están contempladas en ATSC 3.0 (ej., una segunda cadena de recepción). Se obtienen ganancias significativas en condiciones de recepción peatonal gracias a la diversidad en frecuencia proporcionada por las tecnologías MultiRF. La conjunción de LDM con esquemas de MISO proporciona ganancias de rendimiento significativas en redes SFN para la capa fija con el esquema de Alamouti. / Since the beginning of the 21st century, terrestrial broadcasting systems have been blamed of an inefficient use of the allocated spectrum. To increase the spectral efficiency, digital television Standards Developing Organizations settled to develop the technical evolution of the first-generation DTT systems. Among others, a primary goal of next-generation DTT systems (DVB-T2 and ATSC 3.0) is to simultaneously provide TV services to mobile and fixed devices. The major drawback of this simultaneous delivery is the different requirement of each reception condition. To address these constraints different multiplexing techniques have been considered. While DVB-T2 fulfilled the simultaneous delivery of the two services by TDM, ATSC 3.0 adopted the LDM technology. LDM can outperform TDM and FDM by taking advantage of the UEP ratio, as both services, namely layers, utilize all the frequency and time resources with different power levels. At receiver side, two implementations are distinguished, according to the intended layer. Mobile receivers are only intended to obtain the upper layer, known as CL. In order not to increase their complexity compared to single layer receivers, the lower layer, known as EL is treated as an additional noise on the CL decoding. Fixed receivers, increase their complexity, as they should performed a SIC process on the CL for getting the EL. To limit the additional complexity of fixed receivers, the LDM layers in ATSC 3.0 are configured with different error correction capabilities, but share the rest of physical layer parameters, including the TIL, the PP, the FFT size, and the GI. This dissertation investigates advanced technologies to optimize the LDM performance. A demapping optimization for the two LDM layers is first proposed. A capacity increase is achieved by the proposed algorithm, which takes into account the underlying layer shape in the demapping process. Nevertheless, the number of Euclidean distances to be computed can be significantly increased, contributing to not only more complex fixed receivers, but also more complex mobile receivers. Next, the most suitable ATSC 3.0 pilot configuration for LDM is determined. Considering the two layers share the same PP a trade-off between pilot density (CL) and data overhead (EL) arises. From the performance results, it is recommended the use of a not very dense PP, as they have been already designed to cope with long echoes and high speeds. The optimum pilot amplitude depends on the channel estimator at receivers (e.g. the minimum amplitude is recommended for a Wiener implementation, while the maximum for a FFT implementation). The potential combination of LDM with three advanced technologies that have been adopted in ATSC 3.0 is also investigated: MultiRF technologies, distributed MISO schemes, and co-located MIMO schemes. The potential use cases, the transmitter and receiver implementations, and the performance gains of the joint configurations are studied for the two LDM layers. The additional constraints of combining LDM with the advanced technologies is considered admissible, as the greatest demands (e.g. a second receiving chain) are already contemplated in ATSC 3.0. Significant gains are found for the mobile layer at pedestrian reception conditions thanks to the frequency diversity provided by MultiRF technologies. The conjunction of LDM with distributed MISO schemes provides significant performance gains on SFNs for the fixed layer with Alamouti scheme. Last, considering the complexity in the mobile receivers and the CL performance, the recommended joint configuration is MISO in the CL and MIMO in the EL. / Des de començaments del segle XXI, els sistemes de radiodifusió terrestre han sigut culpats d'un ús ineficient de l'espectre assignat. Per a augmentar l'eficiència espectral, els organismes d'estandardització de TV digital van començar a desenvolupar l'evolució tècnica dels sistemes de TDT de primera generació. Entre altres, un dels objectius principals dels sistemes de TDT de pròxima generació (DVB-T2 i el ATSC 3.0) és proporcionar simultàniament serveis de TV a dispositius mòbils i fixos. El principal inconvenient d'aquest lliurament simultani són els diferents requisits de cada condició de recepció. Per a abordar aquestes limitacions, s'han considerat diferents tècniques de multiplexació. Mentre que DVB-T2 escomet el lliurament simultani dels dos serveis mitjançant TDM, ATSC 3.0 va adoptar la Multiplexació per Divisió en Capes (LDM). LDM pot superar a TDM i a FDM en aprofitar la relació de Protecció d'Error Desigual (UEP), ja que tots dos serveis, cridats capes, utilitzen tots els recursos de freqüència i temps amb diferents nivells de potència. En el costat del receptor, es distingeixen dues implementacions, d'acord amb la capa a decodificar. Els receptors mòbils solament estan destinats a obtenir la capa superior, coneguda com Core Layer (CL). Per a no augmentar la seua complexitat en comparació amb els receptors de capa única, la capa inferior, coneguda com Enhanced Layer (EL), és tractada com un soroll addicional en la decodificació. Els receptors fixos augmenten la seua complexitat, ja que han de realitzar un procés de Cancel·lació d'Interferència (SIC) sobre la CL per a obtenir l'EL. Per a limitar la complexitat addicional dels receptors fixos, les capes de LDM en ATSC 3.0 estan configurades amb diferents capacitats de correcció, però comparteixen la resta de blocs de la capa física, inclòs el TIL, el PP, la grandària de FFT i el GI. Aquesta dissertació investiga tecnologies avançades per a optimitzar el rendiment de LDM. Primer es proposa una optimització del procés de demapeo per a les dues capes de LDM. L'algoritme proposat aconsegueix un augment de capacitat, en tenir en compte la forma de l'EL en el procés de demapeo de la CL. No obstant açò, el nombre de distàncies Euclidianes a computar pot augmentar significativament, conduint NO sols a receptors fixos més complexos, sinó també a receptors mòbils més complexos. A continuació, es determina la configuració de pilot ATSC 3.0 més adequada per a LDM. Tenint en compte que les dues capes comparteixen el mateix PP, es produeix una contrapartida entre la densitat de pilots (CL) i la redundància sobre les dades (EL). A partir dels resultats de rendiment, es recomana l'ús d'un PP no gaire dens, ja que ja han sigut dissenyats per a fer front a ecos llargs i altes velocitats. L'amplitud pilot òptima depèn de l'estimador de canal en els receptors (ex., es recomana l'amplitud mínima per a una implementació Wiener, mentre que la màxima per a una implementació FFT). També s'investiga la potencial transmissió conjunta de LDM amb tres tecnologies avançades adoptades en ATSC 3.0: les tecnologies d'agregació de MultiRF, els esquemes de MISO distribuït i els de MIMO colocalitzat. S'estudien els potencials casos d'ús, els principals aspectes d'implementació del transmissor i el receptor, i els guanys de rendiment de les configuracions conjuntes per a les dues capes de LDM. Les restriccions addicionals de combinar LDM amb les tecnologies avançades es consideren admissibles, ja que les majors demandes ja estan contemplades en ATSC 3.0 (ex., una segona cadena de recepció). S'obtenen guanys significatius per a la capa mòbil en condicions de recepció per als vianants gràcies a la diversitat en freqüència proporcionada per les tecnologies MultiRF. La conjunció de LDM amb esquemes MISO distribuïts proporciona guanys de rendiment significatius en xarxes SFN per a la capa fixa amb l'esquema d'Alamouti. / Garro Crevillén, E. (2018). Advanced Layered Divsion Multiplexing Technologies for Next-Gen Broadcast [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/105559 / TESIS

Tato práce je rozdělena do šesti kapitol. První kapitola vysvětluje rozdíly mezi fyzickou vrstvou uplinků systémů LTE a LTE Advanced, zkoumá charakteristiky kanálu komunikace D2D v rámci sítě LTE Advanced, a navrhuje mechanismy optimalizace interferencí. Rovněž je v práci prezentována struktura softwarově definované rádiové platformy, která může být využita pro vyhodnocení rádiových kanálů. Druhá kapitola hodnotí a porovnává výkony uplinkové části fyzické vrstvy systému LTE a LTE Advanced. V prostředí MATLAB je implementována struktura LTE Advanced vysílače a přijímače se všemi stupni zpracování signálu. Generované signály obou výše uvedených systémů jsou přenášeny přes různé modely kanálu ITU-R. Byly používány různé techniky odhadu kanálů a detekce signálu pro obnovení vysílaného signálu. Výsledky jsou prezentovány formou křivek BER a křivek datové prostupnosti. Třetí kapitola navrhuje způsob opakování frekvencí v celulární síti (frequency-reuse) se třemi úrovněmi výkonu, který se využívá jako typ pokročilé metody snižování interferencí. Jsou ukázány normalizované kapacitní hustoty buněk a jejich podoblastí se třemi různými případy distribuce uživatelů uvnitř buněk. Je zobrazena korelace mezi celkovou kapacitou a poloměrem každého regionu. Dosažené výsledky navrhovaného schématu jsou porovnávány s tradiční technikou opakovaného použití frekvence (Reuse-3). Čtvrtá kapitola se zabývá výzkumem alternativní metody optimalizace interferencí. Bylo provedeno ověření kooperačních metod snímání rádiového spektra ve čtyřech různých reálných prostředích: venkovní-interiérové, vnitřní-venkovní, venkovní-vnitřní a venkovní-venkovní. Navržený systém je testován pomocí zařízení Universal Software Radio Peripheral (USRP) a obsahuje dva typy detektorů; energetický detektor a statistický detektor založený na Kolmogorově-Smirnovově testu, které byly implementovány na přijímací straně. Jedním z hlavních požadavků komunikace D2D je znalost charakteristik impulzních odezev rádiového kanálu. Pátá kapitola proto představuje metodu měření kanálu pomocí Zadoff-Chu sekvencí ve frekvenční oblasti jako alternativní techniku k měření kanálu v časové nebo frekvenční doméně. Pomocí navržené metody se základní charakteristiky kanálu, jako je časové rozšíření kanálu (RMS delay spread, mean excess delay), útlum šířením a koherenční šířka pásma extrahují v (až 20x) kratším čase ve srovnání s klasickou metodou měření kanálu ve frekvenční doméně. Jsou také zkoumány charakteristiky venkovních statických rádiových kanálů na vzdálenost několika kilometrů pro pásma UHF a SHF s ko-polarizovanou horizontální a vertikální konfigurací antény. Šestá kapitola uzavírá tezi a shrnuje závěry.

The subject of this work deals with the problem of channel estimation for CDMA systems. This method of multiple access when individual users share the same full bandwidth simultaneously and are differentiated with any of pseudorandom sequences, is now the most perspective method. That is proved by its wide implementation in mobile networks of the third generation and higher systems. This work describes basic theory principles of spread spectrum, above all DS-CDMA (Direct Sequence-CDMA) and furthermore some phenomena of radio wireless channel that affect changes in transmitted signal in its way from transmitter to receiver. Terms of fading, multipath propagation, loss, refraction, scattering of the wave and Rice and Rayleigh probability density functions are mentioned. The third chapter deals with yet known and used capabilities of channel estimation. Differences, advantages and disadvantages of so-called blind estimation or training-based estimation are discussed. Two algorithms: LS method and sliding correlator are analyzed in more detail. There is also description of their simulations in Matlab and some results of these simulations are discussed. The last chapter deals with comparison of main characteristics and achievable accuracy of wireless channel impulse response estimation by both methods, and their possible utilization in real live.

[pt] Os sistemas de múltiplas entradas e múltiplas saídas (MIMO) empregam um número crescente de antenas, o que leva a relevantes consumo de energia e custo de hardware dos front-ends correspondentes. Nesse contexto, o uso de conversores analógico-digitais (ADCs) de baixa resolução é promovido como uma solução promissora para este problema. Neste estudo consideramos um receptor MIMO de baixa resolução que implica que os sinais recebidos são processados simultaneamente pelos 1-bit ADCs e pela rede comparadora. Os sinais de entrada da rede comparadora podem vir de antenas diferentes, de modo que a extensão da rede comparadora pode ser interpretada como canais virtuais com saídas binárias. Com base nesses receptores MIMO de baixa resolução, desenvolvemos um estimador de canal e detector lineares de baixa resolução baseados no critério de mínimo erro médio quadrático (LRA-LMMSE) de acordo com o teorema de Bussgang. Duas redes de comparação são propostas, nomeadas, redes total e parcialmente conectadas. Também desenvolvemos uma rede parcialmente conectada baseada em busca gananciosa que usa muito menos comparadores para obter um desempenho bem próximo ao da rede totalmente conectada. Os resultados numéricos mostram que adicionar canais virtuais pode ser melhor do que adicionar canais físicos extras que correspondem a antenas de recepção adicionais em termos de taxa de erro de bit (BER). Além disso, ao empregar o estimador de canal proposto e seu erro de estimativa correspondente, construímos um limite inferior na taxa de soma ergódica para o receptor LRA-MMSE. Os resultados de simulação mostram que os sistemas com a proposta sistemas MIMO auxiliados por rede com quantização de 1-bit no receptor superam o convencional sistema MIMO de 1-bit em termos de desempenho de BER e erro quadrático médio (MSE). Além disso, as simulações numéricas confirmam uma vantagem significativa em termos de taxa de soma para o sistema proposto. / [en] Multiple-input multiple-output (MIMO) systems employs an increasing number of antennas, which leads to relevant energy consumption and hardware cost of the corresponding front ends. In this context, the use of lowresolution analog to digital converters (ADCs) is promoted as a promising solution to this problem. In this study we consider a low-resolution MIMO receiver which implies that the received signals simultaneously are processed by the 1-bit ADCs and the comparator network. The input signals for the comparator network can come from different antennas, such that the comparator network extension can be interpreted as virtual channels with binary outputs. Based on such low-resolution MIMO receivers, we develop low-resolution aware linear minimum mean-squared error (LRA-LMMSE) channel estimator and detector according to the Bussgang theorem. Two comparator networks are proposed, namely, fully and partially connected networks. We also devise a greedy search-based partially connected network that can use much less comparators to approach the performance of the fully connected network. Numerical results shows that adding virtual channels can be better than adding extra physical channels which corresponds to additional receive antennas in terms of bit error rate (BER). Furthermore, by employing the proposed channel estimator and its corresponding estimation error, we build up a lower bound on the ergodic sum rate for the LRA-LMMSE receiver. Simulation results show that the systems with the proposed network-aided MIMO systems with 1-bit quantization at the receiver outperforms the conventional 1-bit MIMO system in terms of BER and mean-square error (MSE) performances. Moreover, numerical simulations confirm a significant advantage in terms of sum rate for the proposed system.

[pt] Sistemas de múltiplas antenas de larga escala são técnicas fundamentais para sistemas de comunicação sem fio do futuro, que deverão servir dezenas de usuários por estação rádio-base. Neste contexto, um problema chave é o aumento do consumo de energia à medida que o número de antenas cresce. Recentemente, CADs de baixa resolução têm atraído grande interesse de pesquisa. Em particular, CADs de 1 bit são adequados para sistemas de larga escala devido ao seu baixo custo e consumo de energia. Nesta tese, CADs de 1 bit são usados em três diferentes abordagens de projeto, que operam a taxa de Nyquist e a taxas superiores a taxa de Nyquist com estratégias de amostragem uniforme e dinâmica. Nos sistemas operando a taxa de Nyquist, algoritmos de estimação de canal que exploram o conhecimento da baixa resolução e um novo esquema de detecção e decodificação iterativas são propostos, em que códigos low-density paritycheck de bloco curto são considerados para evitar alta latência. Nos sistemas operando a taxas superiores a taxa de Nyquist com sobreamostragem uniforme, algoritmos eficientes de estimação de canal e de detecção com janela deslizante com exploração da baixa resolução são propostos. Além disso, são deduzidas expressões analíticas associadas aos limitantes de Cramér-Rao para os sistemas com sobreamostragem. Resultados numéricos ilustram o desempenho dos algoritmos de estimação de canal propostos e existentes e os limitantes teóricos deduzidos. Nos sistemas operando com sobreamostragem dinâmica, duas abordagens de projeto são desenvolvidas: uma técnica baseada na maximização da soma das taxas e uma técnica baseada na minimização do erro médio quadrático. Em seguida, três algoritmos de redução de dimensão são apresentados e investigados. Resultados de simulações mostram que os sistemas com sobreamostragem dinâmica têm melhor desempenho do que os sistemas com sobreamostragem uniforme em termos de soma das taxas alcançáveis e de taxa de erro de símbolos, enquanto o custo computacional das técnicas examinadas é comparável. / [en] Large-scale multiple-antenna systems are a key technique for future wireless communications, which will serve tens of users per base station (BS). In this scenario, one problem faced is the large energy consumption as the number of receive antennas scales up. Recently, low-resolution analogto-digital converters (ADCs) have attracted much attention. Specifically, 1-bit ADCs in the front-end are suitable for such systems due to their low cost and low energy consumption. In this thesis, 1-bit ADCs are applied in three different system designs, which operate at the Nyquist rate and faster than Nyquist rates along with uniform and dynamic strategies. In the Nyquist-sampling system, low-resolution-aware channel estimation algorithms and a novel iterative detection and decoding scheme are proposed, where short block length low-density parity-check codes are considered for avoiding high latency. In the faster than Nyquist rates with uniform oversampling system, lowresolution-aware channel estimation and sliding window based detection algorithms are proposed due to their low computational cost and high detection accuracy. Particularly, analytical expressions associated with the Bayesian Cramér-Rao bounds for the oversampled systems are presented. Numerical results are provided to illustrate the performance of the proposed channel estimation algorithms and the derived theoretical bounds. In the dynamic-oversampling system, two different system designs are devised, namely, sum rate and mean square error based. Three different dimension reduction algorithms are presented and thoroughly investigated. Simulation results show that the systems with the proposed dynamic oversampling outperform the uniformly oversampled system in terms of the computational cost, achievable sum rate and symbol error rate performance.

A wide range of services and applications become possible when accurate position information for a radio terminal is available. These include: location-based services; navigation; safety and security applications. The commercial, industrial and military value of radio-location is such that considerable research effort has been directed towards developing related technologies, using satellite, cellular or local area network infrastructures or stand-alone equipment. This work studies and investigates two location techniques. The first one presents an implementation scheme for a wideband transmission and direction finding system using OFDM multi-carrier communications systems. This approach takes advantage of delay discrimination to improve angle-of-arrival estimation in a multipath channel with high levels of additive white Gaussian noise. A new methodology is interpreted over the multi carrier modulation scheme in which the simulation results of the estimated channel improves the performance of OFDM signal by mitigating the effect of frequency offset synchronization to give error-free data at the receiver, good angle of arrival accuracy and improved SNR performance. The full system simulation to explore optimum values such as channel estimation and AoA including the antenna array model and prove the operational performance of the OFDM system as implemented in MATLAB. The second technique proposes a low cost-effective method of tracking and monitoring objects (examples: patient, device, medicine, document) by employing passive radio frequency identification (RFID) systems. A multi-tag, (totalling fifty-six tags) with known ID values are attached to the whole patient’s body to achieve better tracking and monitoring precision and higher accuracy. Several tests with different positions and movements are implemented on six patients. The aim is to be able to track the patient if he/she is walking or sitting; therefore, the tests considered six possible movements for the patient including walking, standing, sitting, resting, laying on the floor and laying on the bed, these placements are important to monitor the status of the patient like if he collapsed and fall on the ground so that the help will be quick. The collected data from the RFID Reader in terms of Time Stamp, RSS, Tag ID, and a number of channels are processed using the MATLAB code.

<p dir="ltr">With the increasing availability of inexpensive computing power in wireless radio network nodes, machine learning based models are being deployed in operations that traditionally relied on rule-based or statistical methods. Contemporary high bandwidth networks enable easy availability of significant amounts of training data in a comparatively short time, aiding in the development of better deep learning models. Specialized deep learning models developed for wireless networks have been shown to consistently outperform traditional methods in a variety of wireless network applications.</p><p><br></p><p dir="ltr">We aim to address some of the unique challenges inherent in the wireless radio communication domain. Firstly, as data is transmitted over the air, data privacy and adversarial attacks pose heightened risks. Secondly, due to the volume of data and the time-sensitive nature of the processing that is required, the speed of the machine learning model becomes a significant factor, often necessitating operation within a latency constraint. Thirdly, the impact of diverse and time-varying wireless environments means that any machine learning model also needs to be generalizable. The increasing computing power present in wireless nodes provides an opportunity to offload some of the deep learning to the edge, which also impacts data privacy.</p><p><br></p><p dir="ltr">Towards this goal, we work on deep learning methods that operate along different aspects of a wireless network—on network packets, error prediction, modulation classification, and channel estimation—and are able to operate within the latency constraint, while simultaneously providing better privacy and security. After proposing solutions that work in a traditional centralized learning environment, we explore edge learning paradigms where the learning happens in distributed nodes.</p>

Approved for public release; distribution is unlimited / OFDM systems have experienced increased attention in recent years and have found applications in a number of diverse areas including telephone-line based ADSL links, digital audio and video broadcasting systems, and wireless local area networks (WLAN). Orthogonal frequency-division multiplexing (OFDM) is a powerful technique for high data-rate transmission over fading channels. However, to deploy OFDM in a WLAN environment, precise frequency synchronization must be maintained and tricky frequency offsets must be handled. In this thesis, various techniques to improve the data throughput of OFDM WLAN are investigated. A simulation tool was developed in Matlab to evaluate the performance of the IEEE 802.11a physical layer. We proposed a rapid time and frequency synchronization algorithm using only the short training sequence of the IEEE 802.11a standard, thus reducing the training overhead to 50%. Particular attention was paid to channel coding, block interleaving and antenna diversity. Computer simulation showed that drastic improvement in error rate performance is achievable when these techniques are deployed. / Lieutenant, Hellenic Navy