Beam combining techniques have become an important tool in the design of high-power high-brightness laser systems. Spectral beam combining (SBC) is an incoherent combining technique that does not require phase control of sources, allowing for a stable and robust system. Using SBC, beams from an array of lasers with each element operated at a different wavelength are combined into a single near-diffraction-limited beam with the same aperture using dispersive optical elements. SBC by means of volume Bragg gratings (VBGs) utilizes unique spectral response of VBGs: diffraction efficiency is close to unity when the Bragg condition is satisfied and is close to zero at multiple points corresponding to particular wavelength offsets from Bragg condition. High-efficiency VBGs can be recorded in UV-sensitive photo-thermo-refractive (PTR) glass. Narrow-band reflecting VBGs allow multi-channel SBC with high spectral density of channels. In this dissertation, experimental results of SBC with high spectral density of combined channels in two spectral regions of interest (1064 and 1550 nm) are reported. The behavior of narrow-band VBGs under high-power laser radiation is investigated. A laser system with kW-level output power and near-diffraction-limited divergence of spectrally-combined output beam is demonstrated. The system combines five randomly-polarized Yb-doped fiber lasers with 0.5 nm spectral separation in central wavelengths using narrow-band reflecting VBGs with absolute efficiency of combining > 90%. A novel design of a multi-channel high-power SBC system is suggested. In this approach, a common-cavity is created for all channels such that wavelengths of the sources are passively controlled by the combination of a common output coupler and intra-cavity VBGs which also act as combining elements. Laser wavelengths are automatically selected to match resonant wavelengths of respective VBGs. We report successful demonstration of a passively-controlled SBC system consisting of two amplifiers in a common cavity configuration. A compact and rugged monolithic SBC module based on multiplexed VBGs is introduced. Experimental results of a four-channel implementation of such module are discussed. Modular design of high-power laser systems is suggested with multiple modules arranged in a series. We show that with basic combining parameters achieved up to date, laser systems with 10 kW output power can be constructed using this arrangement. Further scaling to 100 kW power level is discussed.

This thesis explores the practical application of Physical Layer Security (PLS) inMultiple-Input Multiple-Output (MIMO) systems, particularly focusing on ShortPacket Communication (SPC). The aim is to enhance the security of wireless com-munications against eavesdropping threats. By employing advanced techniques suchas Maximum Ratio Transmission (MRT) and Maximum Ratio Combining (MRC),along with Beamforming, the study demonstrates how these methods can signifi-cantly strengthen the signal integrity in MIMO systems.In developing a comprehensive system model that integrates PLS into MIMO,the research provides a dual approach of evaluation. Rigorous theoretical analy-sis coupled with MATLAB simulations are utilized to validate the effectiveness ofthe proposed model. These methods not only underscore the feasibility of PLSin real-world applications but also highlight the potential improvements in wirelesscommunication security, offering a valuable contribution to the field.

No description available.

Recently multiple antenna systems have received significant attention from researchers as a means to improve the energy and spectral efficiency of wireless systems. Among many classes of schemes, Space-Time Block codes (STBC) and Space-Time Trellis codes (STTC) have been the subject of many investigations. Both techniques provide a means for combatting the effects of multipath fading without adding much complexity to the receiver. This is especially useful in the downlink of wireless systems. In this thesis we investigate the impact of channel estimation error on the performance of both STBC and STTC. Channel estimation is especially important to consider in multiple antenna systems since (A) for coherent systems there are more channels to estimate due to multiple antennas and (B) the decoupling of data streams relies on correct channel estimation. The latter effect is due to the intentional cross-talk introduced into STBC. / Master of Science

The development of millimeter-wave (30-300 GHz) sensors and communications systems has a long history of interest, spanning back almost six decades. In particular, mm-wave radars have applications as automotive radars, in remote atmospheric sensing applications, as landing radars for air and spacecraft, and for high precision imaging applications. Mm-wave radar systems have high angular accuracy and range resolution, and, while susceptible to atmospheric attenuation, are less susceptible to optically opaque conditions, such as smoke or dust. This dissertation document will present the initial steps towards a new approach to the creation of a mm-wave radar system at 94 GHz. Specifically, this dissertation presents the design, fabrication and testing of various components of a highly integrated mm-wave a 94 Ghz monopulse radar transmitter/receiver. Several architectural approaches are considered, including passive and active implementations of RF monopulse comparator networks. These architectures are enabled by a high-performance three-dimensional rectangular coaxial microwave transmission line technology known as PolyStrataTM as well as silicon-based IC technologies. A number of specific components are examined in detail, including: a 2x2 PolyStrata antenna array, a passive monopulse comparator network, a 94 GHz SiGe two-port active comparator MMIC, a 24 GHz RF-CMOS 4-port active monopulse comparator IC, and a series of V- and W-band corporate combining structures for use in transmitter power combining applications. The 94 GHz cavity-backed antennas based on a rectangular coaxial feeding network have been designed, fabricated, and tested. 13 dB gain for a 2 x 2 array, as well as antenna patterns are reported. In an effort to facilitate high-accuracy measurement of the antenna array, an E-probe transition to waveguide and PolyStrata diode detectors were also designed and fabricated. AW-band rectangular coaxial passive monopulse comparator with integrated antenna array and diode detectors have also been presented. Measured monopulse nulls of 31.4 dB in the ΔAZ plane have been demonstrated. 94-GHz SiGe active monopulse comparator IC and 24 GHz RF-CMOS active monopulse comparator RFIC designs are presented, including detailed simulations of monopulse nulls and performance over frequency. Simulations of the W-band SiGe active monopulse comparator IC indicate potential for wideband operation, with 30 dB monopulse nulls from 75-105 GHz. For the 24-GHz active monopulse comparator IC, simulated monopulse nulls of 71 dB and 68 dB were reported for the azimuthal and elevational sweeps. Measurements of these ICs were unsuccessful due to layout errors and incomplete accounting for parasitics. Simulated results from a series of rectangular coaxial power corporate power combining structures have been presented, and their relative merits discussed. These designs include 2-1 and 4-1 reactive, Wilkinson, and Gysel combiners at V- and W-band. Measured back-to-back results from Gysel combiners at 60 GHz included insertion loss of 0.13 dB per division for a 2-1 combination, and an insertion loss of 0.3 dB and 0.14 dB for "planar" and "direct" 4-1 combinations, respectively. At 94 GHz, a measured insertion loss of 0.1 dB per division has been presented for a 2-1 Gysel combination, using a back-to-back structure. Preliminary designs for a solid-state power amplifier (SSPA) structure have also been presented. Finally, two conceptual monopulse transceivers will be presented, as a vehicle for integrating the various components demonstrated in this dissertation. / Ph. D.

Mobile arrays employing diversity combining and adaptive beamforming techniques overcome multipath fading, improve coverage, and increase capacity in wireless communications systems. In this thesis, diversity combining and adaptive beamforming performance of different four element arrays for mobile (vehicular speed) and portable (pedestrian speed) terminals is investigated. The performance of four element arrays with different configurations and with different element patterns is compared using the square array of four half-wave dipole elements as the baseline. Results from diversity and beamforming measurements, performed in urban and suburban environments for both line-of-sight (LOS) and obstructed multipath channels are used to analyze and compare the performances of different four element arrays. At cumulative probabilities of 10%, 1% and 0.1%, diversity gain and improvement in signal-to-interference-plus-noise-ratio (SINR) are calculated from the diversity combining measurements and interference rejection measurements respectively. Experimental results illustrating the dependence of diversity gain on power imbalance, envelope correlation and diversity-combining scheme are presented. Measurements were performed at 2.05 GHz using the handheld antenna array testbed (HAAT). Low profile linear arrays are shown to provide diversity gain values of 5 to 8 dB and 11 to 16 dB, respectively for switched and maximal ratio combining at the 99% reliability level in non-line-of-sight urban channel. Interference cancellation of 24 to 28 dB was recorded in urban and suburban line-of-sight (LOS) channels for the sectorized square array. Results of vehicular measurements with the arrays mounted on a ground plane supported above the vehicle roof are also reported. / Master of Science

Afrikaans text / Die doel van hierdie studie was om vas te stel of musiek in terapie gebruik kan word deur ' opvoedkundige sielkundiges, asook wat die verskil is tussen musiekterapie en die terapeutiese aanwending van musiek deur ander terapeute. Vir die verkenning van die terapeutiese gebruik van musiek is 'n literatuurstudie gedoen oor die fenomeen musiekterapie, asook oor die terapeutiese gebruik van musiek. Die twee verskynsels is met mekaar vergelyk om ooreenkomste en verskille aan te dui. Die empiriese studie het aan die lig gebring dat musiek op baie verskillende maniere in terapie gebruik kan word en gekombineer kan word met ander hulpmiddels. Die emosionele en kognitiewe funksie wat musiek vervul is met die studie uitgewys. Musiek help byvoorbeeld om 'n emosionele klimaat te skep wat effektief in terapie gebruik kan word; en musiek kan 'n mens se denke stimuleer. Aanbevelings is ook gegee vir die terapeutiese gebruik van musiek. / The object of the study was to determine if and how music can be used in therapy by the educational psychologist. The further aim was to determine the difference between music therapy and the therapeutic application of music by other therapists. In the exploration of the therapeutic use of music, a comparative study was done between music therapy as phenomenon and the therapeutic use of music, where similarities and differences were outlined. The empirical study showed that music can be used in different ways in therapy and can also be combined with other therapeutical aids. According to this study, music can fulfill an emotional and a cognitive roll. A pleasant emotional climate for therapy can be created and stimulate the client's thoughts. With this study it was possible to give guidelines for therapeutic applications of music. / Psychology of Education / M. Ed. (Voorligting)

This research aims to fill an important gap in focusing on why individuals are able to take part in and/or support activities that have effects on economic, environmental, and social dimensions that are not consistent with their sense of right and wrong. The research focuses on the relationship between supply chain management and moral disengagement, and how this relation affects social responsibility. After observing individuals avoiding responsibility for misconduct an explanatory concept, moral decoupling, was proposed. Moral decoupling considers moral responsibility a flow in the supply chain. Moral decoupling occurs when the flow is restricted. If moral decoupling occurs at an identifiable point it is called a moral decoupling point. The concept was developed by identifying and linking specific supply chain activities and structures with moral disengagement, a theory that explains the deactivation of self regulation. Moral decoupling was able to suggest how to reduce moral disengagement and improve social responsibility. To validate the suggestions a literature review on social responsibility was conducted and identified sixteen elements of social responsibility in supply chain management. The suggestions based on moral disengagement were compared with elements of social responsibility and a large overlap was found. Lastly, suggestions on how to reduce moral disengagement and map moral responsibility in a supply network are proposed, links between elements of social responsibility are presented, and moral coupling is added as a complementary term to moral decoupling. A model explaining the relationship between ethical guidelines, moral responsibility, moral decoupling, and social responsibility is proposed. In relation to current theoretical knowledge the thesis has contributed to the field of socially responsible supply chain management with an application of a new theoretical lens that gives one explanation as to why identifed elements of social responsibility are important. The understanding of social responsibility has reached an increased explanatory depth following the identification of moral disengagement as a generative mechanism, subject to conditions in supply chain management. The research has also applied moral disengagement in a context not identified in earlier research, and shows some of the complexity of applying it to a real-world global context. The elements of social responsibility and moral (de)coupling help practitioners identify what they should focus on to increase social responsibility and also offer an explanation for `why?'. The findings can be used to construct supply chains that are less prone to misconduct and to identify where in the chain it is important to be aware of immoral behavior. The value and originality of this research is centered on the application of a new theoretical lens for socially responsible supply chain management. It is the only identified research in the area which identifies mechanisms on a generative level that explains human behavior and conditions to which those mechanisms are subject. This is also in itself a novel application of moral disengagement in a new research context. / <p>Doctoral thesis for the degree of Doctor of Philosophy in Textile Management at the University of Borås to be publicly defended on Wednesday, December 10, 2014, at 1:00 p.m.,in room M404, University of Bor as, Allégatan 1, Borås</p>

Light transport simulation is used in realistic image synthesis to create physically plausible images of virtual scenes. Important components of the scenes are participating media (e.g. air, water, skin etc.). Efficient computation of light transport in participating media robust to their large diversity is still an open problem. We implemented the UPBP algorithm recently developed by Křivánek et al. It addresses the problem by combining several complementary previous methods using multiple importance sampling, and excels at rendering scenes where the previous methods alone fail. The implementation is available online, we focused on its thorough description to facilitate and support further research in this field. Powered by TCPDF (www.tcpdf.org)

En utilisant la combinaison spectrale de faisceaux, des faisceaux provenant de plusieurs lasers opérant à des longueurs d'onde différentes sont combinés en un seul faisceau avec une divergence proche de la limite de diffraction. Cette thèse présente des résultats expérimentaux de combinaison spectrale de faisceaux avec une grande densité spectrale dans deux régions spectrales d'intérêt (1064 et 1550 nm). Un système laser avec une puissance de sortie de l'ordre du kW et une divergence du faisceau combiné proche de la limite de diffraction est démontré. Le système combine cinq fibres lasers dopées Ytterbium polarisées de façon aléatoire avec une séparation spectrale de 0.5 nm en utilisant des réseaux de Bragg volumiques réfléchissants présentant une largeur spectrale étroite et une efficacité de combinaison absolue supérieure à 90%. La projection d'un tel système pour des puissances de sortie de l'ordre de 100 kW est discutée. / Using spectral beam combining (SBC), beams from an array of lasers with each element operated at a different wavelength are combined into a single near-diffraction-limited beam with the same aperture using dispersive optical elements. In this thesis, experimental results of SBC with high spectral density of combined channels in two spectral regions of interest (1064 and 1550 nm) are reported. A laser system with kW-level output power and near-diffraction-limited divergence of spectrally-combined output beam is demonstrated. The system combines five randomly-polarized Yb-doped fiber lasers with 0.5 nm spectral separation in central wavelengths with absolute efficiency of combining > 90% using narrow-band reflecting volume Bragg gratings recorded in photo-thermo-refractive glass. Scaling of such systems to 100 kW power level is discussed.