New archaeological research was carried out between 2009 and 2011 by the Ministry of State for Antiquities (MSA) at central Dra’ Abu el-Naga. Joining the MSA excavation team in the field in 2009, the author has been studying the findings from this area since then. The excavation site is situated ca. 700 km south of Cairo, opposite the modern city of Luxor in Upper Egypt on the western side of the Nile. Dra\' Abu el-Naga is the modern name of the northern area of the extended necropolis. Central Dra’ Abu el-Naga lies to the north of the causeway of queen Hatshepsut and just south of the German and Spanish concessions, overlooking the valley where a temple of Amenhotep I was once erected. The tombs are situated just below the hilltop of the middle range of the Dra’ Abu el-Naga hills Review And to reach fulfill this main objective, it was proposed in 2013 to follow these research objectives: Consequently one main objective was the recording of architecture of the new discovered tombs and the reconstruction of the original context of the objects, which formed part of their burial equipment. The overlying aim of the research is: Preparing plans of all the new tombs, and also sections and 3D views of two of the tombs as they are very complicated. To place the new tombs in their archaeological context. 2D drawings can be tricky for some people to read, but 3D model views are a universal language that anyone can understand. By using SketchUp Pro to get owners, researchers heads in the same direction.

Made available in DSpace on 2014-12-17T14:54:59Z (GMT). No. of bitstreams: 1 ElderECO_TESE_Capa_ate_pag86.pdf: 3877192 bytes, checksum: d9b068e5eaa76a69d5a1fa1f245dbc5d (MD5) Previous issue date: 2011-09-02 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated / A busca por dispositivos cada vez menores e sem perda de desempenho vem sendo cada dia mais investigada pelos pesquisadores da ?rea envolvendo eletromagnetismo apli- cado. Antenas utilizando materiais cer?micos com uma alta constante diel?trica, sejam elas atuando como substrato do elemento patch radiante ou como sendo o pr?prio ele- mento radiante est?o em evid?ncia nas pesquisas atuais, isso devido ?s in?meras vantagens que apresentam, tais como: baixo perfil, capacidade de redu??o de suas dimens?es (quando comparado a outros dispositivos), alta efici?ncia de radia??o, adequabilidade a faixa de micro-ondas e/ou ondas milim?tricas, baixo coeficiente de temperatura e baixo custo. A raz?o para essa alta efici?ncia ? que as perdas diel?tricas das cer?micas s?o muito baixas, quando comparadas ?s dos materiais comercialmente usados em placas de circuito impresso, tais como: fibra de vidro e fenolite. Essas caracter?sticas tornam os dispositivos cer?micos adequados para operar na faixa de micro-ondas. Aliando o projeto de antenas patch e/ou antenas ressoadoras diel?tricas (DRA) ao uso de certos materiais e ao m?todo de s?ntese desses p?s na fabrica??o dos dispositivos, ? poss?vel escolher um material com uma determinada constante diel?trica para o projeto de uma antena com o tamanho desejado. O objetivo principal deste trabalho consiste no projeto de antenas patches e antenas DRA sob s?ntese de p?s cer?micos (s?ntese por combust?o e por precursores polim?ricos - m?todo Pechini) nanoestruturados para aplica??es na faixa de micro-ondas. O m?todo convencional de mistura de ?xidos tamb?m foi utilizado na obten??o de p?s nanom?tricos para a confec??o das pastilhas e ressoadores diel?tricos. Os dispositivos fabricados e estudados sobre materiais de alta constante diel?trica os tornam bons candidatos ? fabrica??o de dispositivos e circuitos de dimens?es reduzidas quando comparado aos outros dispositivos tradicionais operando na mesma faixa de frequ?ncia. As estruturas analisadas s?o excitadas por tr?s diferentes t?cnicas: i) linha de microfita, ii) acoplamento por abertura e iii) acoplamento indutivo. A efici?ncia dessas t?cnicas de alimenta??o s?o investigadas experimentalmente e comparada com simula??es realizadas pelo Ansoft HFSS, utilizado na an?lise precisa do comportamento eletromagn?tico das antenas atrav?s do m?todo dos elementos finitos (FEM). Nesta tese um estudo bibliogr?fico sobre teoria de antenas de microfita e antenas DRA ? realizado. O mesmo estudo ? realizado a respeito dos materiais e dos m?todos de s?ntese dos p?s cer?micos que s?o utilizados na fabri- ca??o das pastilhas e dos cil?ndros diel?tricos que compor?o os dispositivos investigados. Os meios diel?tricos os quais serviram de suporte na an?lise das antenas patch e/ou DRA s?o analisados atrav?s de simula??es precisas utilizando o m?todo das diferen?as finitas no dom?nio do tempo (FDTD) com base na permissividade el?trica relativa (er) e tangente de perda desses meios (tand). Este trabalho ainda apresenta um estudo em redes neurais artificiais, evidenciando a arquitetura de rede utilizada e suas caracter?sticas, bem como os algoritmos de treinamento que foram usados no treinamento e na modelagem de alguns par?metros associados aos dispositivos investigados

Le développement rapide de l’industrie des systèmes sans fil suscite une demande urgente pour des communications à haut débit, notamment en environnement « indoor ». Toutefois, les protocoles traditionnels de communications sont incapables de supporter de très hauts débits et, surtout, il n'y a pas de ressources spectrales disponibles à basse fréquence. Comme une alternative, la bande des 60GHz est préconisée parce qu’elle permet un débit de plus de 5Gbit/s, grâce à son large spectre (57GHz à 64 GHz). Toutefois, en pratique, l’environnement « indoor » est complexe et, dans les situations d’absence de visibilité directe, la couverture radio est difficile à assurer à cause des fortes atténuations. Afin de remédier à ce problème, l’utilisation de répéteurs est possible. Dans cette thèse, l’intérêt est porté sur les répéteurs passifs, plus simples à installer et compatibles avec une réalisation faible coût. Le cas critique de la couverture radio d’un couloir en T est choisi comme fil conducteur, tout au long de cette étude. Les solutions préconisées visent aussi la compacité, ce qui justifie l’utilisation de réflecteurs plans. A partir de la théorie des réseaux d’antennes, une structure périodique générique pour le répéteur est proposée. Elle implique deux cellules réfléchissantes élémentaires (espacées de /2), produisant des ondes en opposition de phase. Plusieurs topologies et technologies sont ensuite envisagées et étudiées pour la mise en oeuvre. La première utilise des antennes à résonateur diélectrique (DRA). Deux topologies différentes sont étudiées et comparées, le DRA à encoche et le DRA couplé à une ligne déphaseuse en circuit ouvert. Différentes stratégies de modélisation sont également étudiées en utilisant une cellule unique, un couple de 2 cellules avec phases opposées ou un petit réseau. Pour chaque topologie, un réseau canonique de 6×6 éléments est simulé. La deuxième technologie étudiée utilise des guides d’ondes rectangulaires chargés par un matériau diélectrique et courtcircuités. Des analyses paramétriques sont effectuées et un 6 ×6 réseau est conçu et optimisé pour valider la faisabilité de la solution. Finalement, une structure en guide à plaques métalliques parallèles est analysée. Dérivant de la solution précédente, elle permet une fabrication plus simple. Pour cette dernière solution, une analyse plus complète est menée incluant des considérations sur la bande passante, les performances en incidence oblique et la direction de rayonnement maximal. Enfin, un réseau à base de cet élément rainuré est fabriquée présentant une taille de 200 mm×200 mm. Des mesures expérimentales à 60GHz sont réalisées pour tester les performances du réseau. La preuve de concept est ainsi donnée et les résultats expérimentaux sont analysés. / The fast development of information and consumer electronics industries creates a pressing demand for high-speed indoor communications. Traditional communication protocols are unable to support such high transmission rate, and there are no radio bands available at lower frequency. As an alternative, 60GHz communications have sparked great attention, since it enables a maximum data transmission rate more than 5Gbit/s based on its wide unlicensed bandwidth. However, practical indoor environment is usually complicated (e.g. walls, corridors, stairs, etc.), thus the non-line-of-sight (NLOS) areas cannot be covered due to the significant attenuation. Considering the requirements for signal recovery in the NLOS environment, a planar passive repeater with endfire radiation and high directivity, low profile and low cost is investigated and designed in this thesis. Based on array theory, a periodic structure for the foreseen printed repeater is derived out. It involves two reflector elements (in the spacing of 2) to provide 0° and 180°reflection phases respectively. In order to construct a proper reflector element, four topologies are proposed and analyzed. In the first part of the study, DRA (Dielectric Resonator Antenna) technology is the main focus. Two different topologies are investigated and compared, including notched DRA and DRA coupled to phase-shift stub. Different modeling strategies are also studied using either a single cell, a couple of cells with opposite phases or a small array. For each topology, a preliminary 6×6 array is simulated. Optimization at the array level is emphasized through the whole thesis. In the second part, investigations are taken on a rectangular dielectric filled waveguide element. Parametric analyses are carried out and possible fabrication technologies are discussed. Once again, a preliminary 6×6 array is designed and optimized to validate the feasibility of such a structure. In the third part, a parallel-plate groove structure is analyzed. It evolves from the rectangular waveguide, and enjoys more simplification. Further work is taken to explore the arrays’ bandwidth, oblique incidence performance and maximum radiation direction. Detailed theoretical analysis based on the simulation results are demonstrated in the end. Finally, an array based on the groove elements is fabricated in the size of 200mm×200mm. Practical measurements for 60GHz communications in NLOS environment are designed to test the array’s performance. Analyses on the experiment results are given.

Monocytic human leukocyte antigen-D related (mHLA-DR) expression determined by flow cytometry has been suggested as a biomarker of sepsisinduced immunosuppression. In order to facilitate use of HLA-DR in clinical practice, a quantitative real-time PCR technique measuring HLA-DR at the transcription level was developed and evalutated. Levels of HLA-DR mRNA correlated to mHLADR expression and were robustly measured, with high reproducibility, during the course of infection. Dynamics of mHLA-DR expression was studied during the first weeks of bloodstream infection (BSI) and was found to be dependent on the bacterial etiology of BSI. Moreover, mHLA-DR was shown to be inversely related to markers of inflammation. In patients with unfavourable outcome, sustained high C-reactive protein level and high neutrophil count were demonstrated along with low mHLA-DR expression and low lymphocyte count. This supports the theory of sustained inflammation in sepsis-induced immunosuppression. The association between mHLA-DR and bacterial etiology may be linked to the clinical trajectory via differences in ability to cause intractable infection. Staphylococcus aureus was the dominating etiology among cases with unfavourable outcome. With focus on patients with S. aureus BSI, those with complicated S. aureus BSI were found to have lower HLA-DR mRNA expression during the first week than those with uncomplicated S. aureus BSI. If these results can be confirmed in a larger cohort, HLA-DR measurement could possibly become an additional tool for early identification of patients who require further investigation to clear infectious foci and achieve source control. In conclusion, PCR-based measurement of HLA-DR is a promising method for measurements of the immune state in BSI, but needs further evaluation in the intensive care unit setting to define the predictive and prognostic value for deleterious immunosuppression. The etiology of infection should be taken into consideration in future studies of translational immunology in sepsis.

Depuis la création de la zawiya de Tamgroute au sud du Maroc en 1575 ‘Amrū Ibn Aḥmad Al-Anṣārī, ses premiers maîtres se sont rendus compte que pour assurer la continuité, la pérennité et la crédibilité de leur institution religieuse, il est indispensable de mettre en place une école pour l’enseignement et l’apprentissage des sciences religieuses (‘ilm). C’est dans cette optique qu’Aḥmad Ibn Ibrāhīm, qui était à la tête de la zawiya à partir de 1634 a tout de suite pensé à faire venir un savant et faqīh, du nom de Muḥammad Ibn Nāṣir afin d’assurer l’enseignement du ‘ilm et donner, ainsi, un nouvel élan à Tamgroute. Aujourd’hui encore, des étudiants « ṭolba » ou « msāfrīn » y affluèrent de différentes régions du Maroc pour apprendre la langue arabe, la littérature et le ‘ilm. Le choix de ce sujet est dicté par le peu d’intérêt porté par des recherches aux écrits qui traitent l’enseignement traditionnel au Maroc. Depuis l’époque du protectorat où a débuté l’intérêt à ce type d’enseignement, qui était d’ailleurs le seul connu, ces dites recherches étaient succinctes et ne traitaient que brièvement ce type d’enseignement dans la zone urbaine surtout et dans un de ses aspects seulement qu’est le msīd ou école coranique. Alors que cet enseignement n’est pas évoqué dans le milieu rural, comme à Tamgroute où il était d’une grande envergure. / Since the establishment of the Zawiya of Tamgroute in the south of Morocco in 1575 by ‘Amrū Ibn Aḥmad Al-Anṣārī, its first masters were aware of the importance of a school of religious sciences (‘ilm) in order to ensure the continuity and the credibility of their religious institution. Therefore, Aḥmad Ibn Ibrāhīm, who was at the helm of the zawiya starting from1634, recruited Muḥammad Ibn Nāṣir, a religious scholar and faqīh, to teach ‘ilm and give a new momentum toTamgroute. Even today, students, both ṭolba and msāfrīn, flock from the the four corners of Morocco to learn Arabic, literature and ‘ilm in Tamgroute.The limited scholarly interest in the literature of traditional education kindled my interest in this topic. Ever since the French Protectorate, during which interest in this type of education was started, scholarly works were very succint and their treatment of this type of education was very brief and mostly interested in urban areas. The msid or the Koranic school received much more attention. However, despite its large scale, traditional education in places like Tamgroute received scant attention.

HLA-DRA gene polymorphisms might play an important role in alcohol dependence (AD). We examined genetic associations of 29 single-nucleotide polymorphisms (SNPs) within the HLA-DRA gene with AD using two Caucasian samples - the Collaborative Study on the Genetics of Alcoholism (COGA) sample (660 AD cases and 400 controls) and the Study of Addiction: Genetics and Environment (SAGE) sample (623 cases and 1,016 controls). Logistic regression analysis using PLINK showed that 16 SNPs were associated with AD in the COGA sample and 13 SNPs were associated with AD in the SAGE sample (p < 0.05). The best novel signal was SNP rs2239803 associated with AD in both samples (p = 0.000817 for the COGA sample and p = 0.0026 for the SAGE sample, respectively) while one flanking SNP rs4935356 also showed strong association in both samples (p = 0.00219 and 0.0026 for the COGA and SAGE samples, respectively). Furthermore, these two SNPs revealed stronger associations in meta-analysis of these two samples (p = 8.97 × 10-6 and 2.02 × 10-5 for rs2239803 and rs4935356, respectively). In addition, the G-A haplotype from these two SNPs revealed a significant association with AD in both the COGA and SAGE samples (p = 0.0007 and 0.0019, respectively). These findings highlight the novel associations with HLA-DRA that may play an important role in the etiology of AD.

HLA-DRA gene polymorphisms might play an important role in alcohol dependence (AD). We examined genetic associations of 29 single-nucleotide polymorphisms (SNPs) within the HLA-DRA gene with AD using two Caucasian samples - the Collaborative Study on the Genetics of Alcoholism (COGA) sample (660 AD cases and 400 controls) and the Study of Addiction: Genetics and Environment (SAGE) sample (623 cases and 1,016 controls). Logistic regression analysis using PLINK showed that 16 SNPs were associated with AD in the COGA sample and 13 SNPs were associated with AD in the SAGE sample (p < 0.05). The best novel signal was SNP rs2239803 associated with AD in both samples (p = 0.000817 for the COGA sample and p = 0.0026 for the SAGE sample, respectively) while one flanking SNP rs4935356 also showed strong association in both samples (p = 0.00219 and 0.0026 for the COGA and SAGE samples, respectively). Furthermore, these two SNPs revealed stronger associations in meta-analysis of these two samples (p = 8.97 × 10-6 and 2.02 × 10-5 for rs2239803 and rs4935356, respectively). In addition, the G-A haplotype from these two SNPs revealed a significant association with AD in both the COGA and SAGE samples (p = 0.0007 and 0.0019, respectively). These findings highlight the novel associations with HLA-DRA that may play an important role in the etiology of AD.

Ultra wide-band (UWB) technology is considered one of the very promising wireless technologies in the new millennium. This increases the demand on designing UWB antennas that meet the requirements of different UWB systems. In this dissertation, different UWB antennas are proposed such as an antenna that covers almost the entire UWB bandwidth, 3.5-11 GHz, as defined by the federal communication commission (FCC). This antenna has a size of 50×40×1.5mm3. Miniaturized worldwide UWB antennas are also introduced. Miniaturized worldwide UWB antennas that have compact sizes of (30×20×1.5) mm3, and (15×15×1.5) mm3 are also investigated. The designed worldwide UWB antennas cover the UWB spectrums defined by the electronic communication committee (ECC), 6-8.5 GHz, and the common worldwide UWB spectrum, 7.4-9 GHz. A system consisting of two identical antennas (transmitter and receiver) is built in the Antennas and Propagation Lab at Southern Illinois University Carbondale (SIUC) to test the coupling properties between every two identical antennas. The performance of that system is analyzed under different ii conditions to guarantee that the transmitted signal will be correctly recovered at the receiver end. The designed UWB antennas can be used in many short range applications such as wireless USB. Wireless USB is used in PCs, printers, scanners, laptops, MP3 players, hard disks and flash drives. A new technique is introduced to widen the impedance bandwidth of dielectric resonator antennas (DRAs). DRA features compactness, low losses, and wideband antennas. Different compact UWB DRAs are investigated in this dissertation. The designed DRAs cover a wide range of frequency bands such as, 6.17-24GHz, 4.23-13.51GHz, and 4.5-13.6GHz. The designed DRAs have compact sizes of 1×1×1.5cm3, 0.9×0.9×1.32cm3, 0.6×0.6×1cm3, and 0.6×0.6×0.9cm3; and cover the following frequency bands 4.22-13.51GHz, 4.5-13.6GHz, 6.1-23.75GHz, and 6.68-26.7GHz; respectively. The proposed DRAs may be used for applications in the X, Ku and K bands such as military radars and unmanned airborne vehicles (UAV).

Most students progress in learning when school is in session. However, during the summer months formal education often ends, and many of the gains students make during the academic year are lost over the summer break. The Alpine School District developed the Students and Teachers Achieving Reading Success (STARS) program, an extensive summer reading program for struggling readers. The purpose of this study was to evaluate the effectiveness of the STARS program on reading ability for students exiting the first grade, as measured by the Developmental Reading Assessment 2 (DRA2). Results from a mixed-method ANOVA indicated that STARS students performed better than a nonequivalent control group (p < .001). Results from the multilevel growth modeling analysis provide evidence that the STARS participants performed better than those who were eligible for the program but did not participate. STARS participants improved in their reading ability at a significantly higher rate than students who were not eligible for the program and did not participate. The results indicated that the reading achievement gap of STARS participants narrowed by the end of second grade. Moderation variables were not statistically significant in their impact of reading trajectories between STARS participants and nonparticipants.

With the rapid advancement of autonomous vehicles, reliable and efficient wireless communication systems with high data rates have become essential for their safe and efficient operation and further evolution. High data rates are found in the higher frequency bands where conductive antennas lack radiation efficiency. To achieve high radiation efficiency, researchers tend towards using Circular Polarized Dielectric Resonator Antennas (CP-DRA). However, there is a lack of studies that cover the FR2 5G bands n257, n258, n261 suggested by 3GPP which is needed if vehicles were to drive across regional borders. This project addresses the challenges of achieving suitable CP-DRA performance for autonomous vehicle communication aimed at covering these FR2 5G bands. The objective is to design and simulate an optimized CP-DRA antenna that meets the required performance characteristics for further use in a phased array for efficient communication in the high-frequency FR2 5G bands. The objective was fulfilled by producing a model of a CP-DRA antenna that covers the mentioned FR2 5G bands. The antenna array achieves this with an axial ratio beam width at plus/minus 20 degrees azimuth angle and peak gain of 9-12 dBi throughout the frequency range. The model consists of four cylindrical resonator antenna elements excited in phase quadrature by a slot aperture feeding network to accomplish the circular polarization. The radiation efficiency of the model is 94% throughout the frequency range with an impedance bandwidth of &lt; -15 dB. A prototype was built and tested that vaguely verified the beam pattern and center frequency. Future work includes building a prototype more comparable to the model for further verification of the circularly polarized gain pattern.