This thesis consists of two parts. Part one includes the design procedure and implementation of the building blocks for an RF tuner module used in the Digital Video Broadcasting ¡V Terrestrial ¡]DVB-T¡^system. It contains the comparison of several RF tuner architectures, frequency planning, and link-budget analysis. Measurement results for the designed tuner operating in the frequency range from 50 to 860 MHz show that the maximum power gain ranges from 49 to 57.6 dB. The entire range for gain control is over 60 dB. In the maximum gain state, the noise figure ranges form 6.8 to 11.5 dB, the output third-order interception point¡]OIP3¡^ranges from 11.7 to 13.8 dBm, and the image rejection is over 50 dB. By applying the simplified single-carrier modulation signals, the tuner can pass the DVB-T system specifications with respect to the adjacent-channel and overlapping-channel protection ratios. In part two, an RFIC design for low-noise variable-gain amplifier that can be used in the RF front end of DVB-T system is presented. It operates from 100 to 900 MHz and dissipates 59.4 mW under a 3.3-V power supply. In the maximum gain state, measurement results for this RFIC show that the noise figure is less than 4 dB, the maximum gain is more than 14 dB, and the OIP3 is about 6.8dBm. The entire gain control range is over 40 dB.

The topic of this thesis presents a digital front end (DFE) of the digital video broadcasting over terrestrial (DVB-T). The DVB-T system is similar to most of the prior digital communication system. It is roughly divided into two major parts, one for channel coding/decoding, and the other for modulation/demodulation. The thesis is mainly focused on the DVB-T digital video broadcasting demodulation part of the receiver and the integration of a complete digital front demodulation system. The major operational processor of the DFE is a 2K/8K dual-mode FFT processor, which has been implemented by the TSMC ( Taiwan Semiconductor Manu-facturing Company ) 0.35um 2P4M CMOS process technology to justify the simulation results as well as the correctness of the proposed architecture.

<p>TV and radio services have always been distributed over analogue broadcasting networks and been received on a TV -set or a radio receiver. Today this situation is changing due to digitalization and convergence between broadcasting, telecommunications and data communications. Other terminals, such as a PC, can also receive TV and radio services. Digital TV and radio can offer additional services such as e-commerce, electronic program guides and content synchronized to the TV and radio shows. If these services are to be received by several receiving terminals with different properties, the services must be adapted to the terminals. This can be done by scaling the services, meaning that the appearances and functionality of the services vary depending on the terminals’ properties. In this thesis scalable services are examined from a terminal point of view. Present and future receivers, platforms and possible methods to achieve scalability are presented, and their effects on scalable services are discussed.</p> / <p>TV- och radiosändningar har fram till nyligen endast distribuerats över analoga TV- och radionät och tagits emot av traditionella TV- och radioapparater, men detta håller på att ändras i och med att sändningarna digitaliseras och konvergens sker mellan broadcasting, telekom och datakom. Nu kan även andra terminaler fungera som mottagare, t.ex. en PC med ett digital-TVkort eller ett digital-radiokort. Digital TV och radio erbjuder tilläggstjänster som t.ex. ehandel, tjänster kopplade till radio- eller TV-program och elektroniska programguider. Om samma tjänst ska kunna tas emot på flera olika mottagarterminaler med olika egenskaper, måste tjänsten anpassas efter terminalerna. Detta kan göras genom att skala tjänsten, dvs. utseendet och funktionerna varierar beroende på bl.a. terminalens kapacitet. I detta arbete har terminalaspekterna på skalbara tjänster undersökts. Aktuella och framtida terminaler, plattformar och eventuella skalbarhetslösningar presenteras, och deras påverkan på skalbara tjänster diskuteras.</p>

Passive coherent location (PCL) radars employ illuminators of opportunity to detect and track targets. This silent operating mode provides many advantages such as low cost and interception immunity. Many radiation sources have been exploited as illumination sources such as broadcasting and telecommunication transmitters. The classical architecture of the bistatic PCL radars involves two receiving channels: a reference channel and a surveillance channel. The reference channel captures the direct-path signal from the transmitter, and the surveillancesignal collects the possible target echoes. The two major challenges for the PCL radars are the reference signal noise and the surveillance signal static clutter. A noisy reference signal degrades the detection probability by increasing the noise-floor level of the detection filter output. And the static clutter presence in the surveillance signal reduces the detector dynamic range and buries low magnitude echoes.In this thesis, we consider a PCL radar based on the digital video broadcasting-terrestrial (DVB-T) signals, and we propose a set of improved methods to deal with the reference signal noise and the static clutter in the surveillance signal. The DVB-T signals constitute an excellentcandidate as an illumination source for PCL radars; they are characterized by a wide bandwidth and a high radiated power. In addition, they provide the possibility of reconstructing the reference signal to enhance its quality, and they allow a straightforward static clutter suppressionin the frequency domain. This thesis proposes an optimum method for the reference signal reconstruction and an improved method for the static clutter suppression.The optimum reference signal reconstruction minimizes the mean square error between the reconstructed signal and the exact one. And the improved static clutter suppression method exploits the possibility of estimating the propagation channel. These two methods extend thefeasibility of a single receiver PCL radar, where the reference signal is extracted from the direct-path signal present in the surveillance signal. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished

TV and radio services have always been distributed over analogue broadcasting networks and been received on a TV -set or a radio receiver. Today this situation is changing due to digitalization and convergence between broadcasting, telecommunications and data communications. Other terminals, such as a PC, can also receive TV and radio services. Digital TV and radio can offer additional services such as e-commerce, electronic program guides and content synchronized to the TV and radio shows. If these services are to be received by several receiving terminals with different properties, the services must be adapted to the terminals. This can be done by scaling the services, meaning that the appearances and functionality of the services vary depending on the terminals’ properties. In this thesis scalable services are examined from a terminal point of view. Present and future receivers, platforms and possible methods to achieve scalability are presented, and their effects on scalable services are discussed. / TV- och radiosändningar har fram till nyligen endast distribuerats över analoga TV- och radionät och tagits emot av traditionella TV- och radioapparater, men detta håller på att ändras i och med att sändningarna digitaliseras och konvergens sker mellan broadcasting, telekom och datakom. Nu kan även andra terminaler fungera som mottagare, t.ex. en PC med ett digital-TVkort eller ett digital-radiokort. Digital TV och radio erbjuder tilläggstjänster som t.ex. ehandel, tjänster kopplade till radio- eller TV-program och elektroniska programguider. Om samma tjänst ska kunna tas emot på flera olika mottagarterminaler med olika egenskaper, måste tjänsten anpassas efter terminalerna. Detta kan göras genom att skala tjänsten, dvs. utseendet och funktionerna varierar beroende på bl.a. terminalens kapacitet. I detta arbete har terminalaspekterna på skalbara tjänster undersökts. Aktuella och framtida terminaler, plattformar och eventuella skalbarhetslösningar presenteras, och deras påverkan på skalbara tjänster diskuteras.

The goal of this thesis was to implement a DVB-T receiver on Coresonic’s DSP-processor and attempt to evaluate how to design a receiver that is robust against very strong echoes with a long delay. Long delayed echoes is very common in Single Frequency Networks (SFN) which is why focus was put on finding algorithms that work well in SFN.The thesis involved analyzing different algorithms involved in making a DVB-T receiver where the focus was to find a good channel estimation algorithm. The thesis also included programming the DSP-processor and making some smaller modifications to their hardware solution to integrate their error correction hardware. After finding relevant articles with promising algorithms a small transmitter, channel and receiver was modeled in Matlab in order to try the different algorithms. After testing the different algorithms some of the simpler ones were first implemented to quickly get a working receiver. The implementation was however time consuming and all of the most appropriate algorithms to better avert the effects of long and strong echoes where not implemented. This means some algorithms where only analyzed and discussed.The receiver performance is tested and simulated in Coresonic’s DSP simulator. The receiver does not fully meet the requirements set by NorDig when it comes to handling long delay spread echoes with a magnitude of 0db when tested in the DSP processor simulator. The receiver is however able to handle the Ricean channel at a SNR of 19 Db and Rayleigh channel at an SNR of 24 Db.This report is the result of the final thesis of a Master of Science in Computer Engineering at Linköpings Tekniska Högskola. The thesis was performed at Coresonic AB in Mjärdevi Linköping.

Subject of this thesis is elemental description of DVB digital television and digitalization process of its terrestrial transmission according to DVB-T standard. The thesis characterizes in detail RF transmission channels used for wireless distribute of television. These channels ale mathematically described and their effect to OFDM signal is simulated in the MATLAB environment. It was created application with graphical user interface by this environment. Using simple setting of DVB-T and transmission channel parameters in the application user can simulate selective fading. Results of simulations with various settings are compared and analysed.

This thesis focuses on analysis, classification, simulation and assessment of the signal fading in the scope of terrestrial digital television reception. This is a phenomenon associated with signal multipath propagation caused by the reflection, dispersion and diffraction of electromagnetic waves in interaction with relief and artificial obstacles. Wave propagation issues in a specific landscape are not the central theme of this project. Signal transmission between the transmitter and receiver is defined by channel profile models. Attention is directed not only to static reception but also to portable and mobile reception. Simulation of this phenomenon takes place in the software environment of MATLAB. In the framework of this project program fundament was created which allows simulate the signal processing across the entire communication chain of television broadcasting, including its transmitting and receiving parts.

This Master thesis is focused on detailed description of the DVB-T2 system. This work deals with the description of the particular parts of models and with typical RF transmission channels for fixed and mobile reception. In order to simulate the impact of the fading transmission channels on the transmitted signal there was developed an appropriate application in MATLAB. The graphic user interface of this application allows set the transmission parameters of DVB-T2 and the parameters of the transmission channels. Results of simulations with various settings are evaluated and compared with the results, obtained from the DVB-T measurements.

The main goal of the masters project is to design a dual band antenna for receiving DVB-T signal in the area of the city of Brno. The antenna will be designed and detaily adjusted for receiving multiplex 1 and 3, exactly for frequencies of 538 MHz and 778 MHz. The designed antenna will be deeply tested in 4nec2 and CST Microwave Studio programs.