Spelling suggestions: "subject:"direct numerical simulation"" "subject:"firect numerical simulation""
41 |
Direct Numerical Simulations of Magnetic Helicity Conserving Astrophysical DynamosCridland, Alex J. 04 1900 (has links)
<p>Here we present direct numerical simulations of a shearing box which models the MHD turbulence in astrophysical systems with cylindrical geometries. The purpose of these simulations is to detect the source of the electromotive force - the driver of large scale magnetic field evolution. This electromotive force is responsible for the large scale dynamo action which builds and maintains the magnetic field against dissipation in plasmas. We compare the estimates of the electromotive force from the kinematic approximation of mean field theory - the most prevalent theory for astrophysical dynamos - with a modified version of mean field theory which restricts the electromotive force by the consideration of magnetic helicity conservation. We will show that in general the kinematic approximation overestimates the observed electromotive force for the majority of the simulation, while the term derived from the helicity conservation estimates the electromotive force very well. We will also illustrate the importance of the shear in the fluid to the growth and strength of the resulting large scale magnetic field. Too strong and the small scale dynamo does not grow enough to properly seed a strong large scale dynamo. Too weak, and no large scale magnetic field is observed after the small scale dynamo has saturated. Finally, we will find that in order to maintain the strength of the emerged large scale magnetic dynamo we require a magnetic Prandtl number ($Pr \equiv \nu/\eta$) that is at least an order of magnitude above unity.</p> / Master of Science (MSc)
|
42 |
Numerical Investigation of Laminar-Turbulent Transition in a Cone Boundary Layer at Mach 6Sivasubramanian, Jayahar January 2012 (has links)
Direct Numerical Simulations (DNS) are performed to investigate laminar-turbulent transition in a boundary layer on a sharp cone at Mach 6. The main objective of this dissertation research is to explore which nonlinear breakdown mechanisms may be dominant in a broad--band "natural" disturbance environment and then use this knowledge to perform controlled transition simulations to investigate these mechanisms in great detail. Towards this end, a "natural" transition scenario was modeled and investigated by generating wave packet disturbances. The evolution of a three-dimensional wave packet in a boundary layer has typically been used as an idealized model for "natural" transition to turbulence, since it represents the impulse response of the boundary layer and, thus, includes the interactions between all frequencies and wave numbers. These wave packet simulations provided strong evidence for a possible presence of fundamental and subharmonic resonance mechanisms in the nonlinear transition regime. However, the fundamental resonance was much stronger than the subharmonic. In addition to these two resonance mechanisms, the wave packet simulations also indicated the possible presence of oblique breakdown mechanism. To gain more insight into the nonlinear mechanisms, controlled transition simulations were performed of these mechanisms. Several small and medium scale simulations were performed to scan the parameter space for fundamental and subharmonic resonance. These simulations confirmed the findings of the wave packet simulations, namely that, fundamental resonance is much stronger compared to the subharmonic resonance. Subsequently a set of highly resolved fundamental and oblique breakdown simulations were performed. In these DNS, remarkable streamwise arranged "hot'' streaks were observed for both fundamental and oblique breakdown. The streaks were a consequence of the large amplitude steady longitudinal vortex modes in the nonlinear régime. These simulations demonstrated that both second--mode fundamental breakdown and oblique breakdown may indeed be viable paths to complete breakdown to turbulence in hypersonic boundary layers at Mach 6.
|
43 |
On stability and receptivity of boundary-layer flowsShahriari, Nima January 2016 (has links)
This work is concerned with stability and receptivity analysis as well as studies on control of the laminar-turbulent transition in boundary-layer flows through direct numerical simulations. Various flow configurations are considered to address flow around straight and swept wings. The aim of this study is to contribute to a better understanding of stability characteristics and different means of transition control of such flows which are of great interest in aeronautical applications. Acoustic receptivity of flow over a finite-thickness flat plate with elliptic leading edge is considered. The objective is to compute receptivity coefficient defined as the relative amplitude of acoustic disturbances and TS wave. The existing results in the literature for this flow case plot a scattered image and are inconclusive. We have approached this problem in both compressible and incompressible frameworks and used high-order numerical methods. Our results have shown that the generally-accepted level of acoustic receptivity coefficient for this flow case is one order of magnitude too high. The continuous increase of computational power has enabled us to perform global stability analysis of three-dimensional boundary layers. A swept flat plate of FSC type boundary layer with surface roughness is considered. The aim is to determine the critical roughness height for which the flow becomes turbulent. Global stability characteristics of this flow have been addressed and sensitivity of such analysis to domain size and numerical parameters have been discussed. The last flow configuration studied here is infinite swept-wing flow. Two numerical set ups are considered which conform to wind-tunnel experiments where passive control of crossflow instabilities is investigated. Robustness of distributed roughness elements in the presence of acoustic waves have been studied. Moreover, ring-type plasma actuators are employed as virtual roughness elements to delay laminar-turbulent transition. / <p>QC 20161124</p>
|
44 |
Combined study by Direct Numerical Simulation and optical diagnostics of the flame stabilization in a diesel spray / Etude combinée par simulation numérique direct et diagnostics optiques de la stabilisation de la flamme d’un spray DieselTagliante-Saracino, Fabien 11 March 2019 (has links)
La compréhension du processus de stabilisation des flammes Diesel constitue un défi majeur en raison de son effet sur les émissions de polluants. En effet, la relation étroite entre la distance de lift-off (distance entre la flamme et l’injecteur) et la production de suie est maintenant bien établie. Cependant, différents mécanismes de stabilisation ont été proposés mais sont toujours sujets à discussion. L'objectif de cette thèse est de fournir une contribution expérimentale et numérique pour identifier les mécanismes de stabilisation majeurs.La combustion d'un spray n-dodécane issu d'un injecteur mono-trou a été étudiée dans une cellule à volume constant en utilisant une combinaison de diagnostics optiques : mesures hautes cadences et simultanées de schlieren, LIF à 355 nm, chimiluminescence haute température ou de chimiluminescence OH *. Des expériences complémentaires sont effectuées au cours desquelles le mélange est allumé entre l’injecteur et le lift-off par plasma induit par laser. L’évolution du lift-off jusqu’à son retour à une position d’équilibre plus en aval est ensuite étudiée pour différentes conditions opératoires. L'analyse de l'évolution du lift-off sans allumage laser révèle deux types principaux de comportement : des sauts brusques en amont et un déplacement plus progressif en aval. Alors que le premier comportement est attribué à des événements d'auto-inflammation, le second est analysé grâce aux résultats obtenus par allumage laser. Il a été constaté que l'emplacement du formaldéhyde avait un impact important sur la vitesse de retour du lift-off.Une simulation numérique directe (DNS en anglais) bidimensionnelle d'une flamme liftée turbulente se développant spatialement dans les mêmes conditions opératoires que les expériences et reproduisant l'évolution temporelle de la distance de lift-off est proposée. Du fait que les expériences montrent que la flamme se stabilise en aval du spray liquide, la DNS ne couvre qu'une région en aval où l’écoulement est réduit à un jet gazeux. La chimie de l’n-dodécane est modélisée à l'aide d'un schéma cinétique (28 espèces transportées) prenant en compte les chemins réactionnels basse et haute température. Comme observé expérimentalement, la stabilisation de la flamme est intermittente : des auto-inflammations se produisent tout d'abord puis se font convecter en aval jusqu'à ce qu'une nouvelle auto-inflammation se produise. Le mécanisme principal de stabilisation est l'auto-inflammation. Toutefois, on observe également à la périphérie du jet diverses topologies de flammes, telles que des flammes triples, qui aident la flamme à se stabiliser en remplissant des réservoirs de gaz brûlés à haute température localisés à la périphérie, ce qui déclenche des auto-inflammations. Toutes ces observations sont résumées dans un modèle conceptuel décrivant la stabilisation de la flamme.Enfin, un modèle prédisant les fluctuations de la distance du lift-off autour de sa valeur moyenne temporelle est proposé. Ce modèle a été développé sur la base d’observations faites dans l’étude expérimentale et numérique : premièrement, le suivi temporel du lift-off a été décomposé en une succession d’auto-inflammations et d’évolutions en aval. Deuxièmement, la période entre deux auto-inflammations et la vitesse d'évolution en aval ont été modélisées à l'aide de corrélations expérimentales disponibles dans la littérature. Troisièmement, le modèle a été adapté afin de prendre en compte l’effet des réservoirs à haute température sur les fluctuations de la flamme. Et enfin, le modèle a été comparé aux données expérimentales, au cours desquelles des variations de la température ambiante, de la concentration en oxygène et de la pression d'injection ont été effectuées. Dès lors que le modèle a montré une bonne correspondance avec les données expérimentales, il peut être utilisé en complément du modèle prédisant la distance du lift-off moyen afin de mieux décrire la stabilisation d’une flamme Diesel. / The understanding of the stabilization process of Diesel spray flames is a key challenge because of its effect on pollutant emissions. In particular, the close relationship between lift-off length and soot production is now well established. However, different stabilization mechanisms have been proposed and are still under debate. The objective of this PhD is to provide an experimental and numerical contribution to the investigation of these governing mechanisms.Combustion of an n-dodecane spray issued from a single-hole nozzle was studied in a constant-volume precombustion vessel using a combination of optical diagnostic techniques. Simultaneous high frame rate schlieren, 355LIF (laser-induced fluorescence) and high-temperature chemiluminescence or OH* chemiluminescence are respectively used to follow the evolution of the gaseous jet envelope, formaldehyde location and lift-off position. Additional experiments are performed where the ignition of the mixture is forced at a location upstream of the natural lift-off position by laser-induced plasma ignition. The analysis of the evolution of the lift off position without laser ignition reveals two main types of behaviors: sudden jumps in the upstream direction and more progressive displacement towards the downstream direction. While the former is attributed to auto-ignition events, the latter is studied through the forced laser ignition results. It is found that the location of formaldehyde greatly impacts the return velocity of the lift-off position.A two-dimensional Direct Numerical Simulation (DNS) of a spatially developing turbulent lifted flame at the same operating conditions than the experiments and reproducing the temporal evolution of the lift-off length is proposed to provide a better understanding of the flame stabilization mechanisms. The DNS only covers a downstream region where the flow can be reduced to a gaseous jet, since experimental observations have shown that the flame stabilized downstream of the liquid spray. N-dodecane chemistry is modeled using a reduced chemical kinetics scheme (28 species transported) accounting for the low- and high temperature reaction pathways. Similar to what has been observed in the experiments, the flame stabilization is intermittent: flame elements first auto-ignite before being convected downstream until another sudden auto-ignition event occurs closer to the fuel injector. The flame topologies, associated to such events, are discussed in detail, using the DNS results, and a conceptual model summarizing the observations made is proposed. Results show that the main flame stabilization mechanism is auto-ignition. However, multiple reaction zone topologies, such as triple flames, are also observed at the jet periphery of the fuel jet helping the flame to stabilize by filling high-temperature burnt gases reservoirs localized at the periphery, which trigger in its turn auto-ignitions.Finally, a model predicting the fluctuations of the lift-off length around its time-averaged value is proposed. This model has been developed based on observations made in the experimental and numerical study: first, the lift-off length time-evolution was decomposed into a succession of auto-ignition events and downstream evolutions. Second, the period between two auto-ignition and the velocity of the downstream evolution was modeled using experimental correlations available in the literature. Third, the model has been adapted to take into account the effect of the high-temperature reservoirs on the flame fluctuations. Last, the model was compared to experimental data, where the ambient temperature, oxygen concentration and injection pressure were varied. Since the model showed good agreement with the experimental data, it can be used in addition to the model predicting the time-averaged lift-off length to better describe the Diesel flame stabilization.
|
45 |
Simulation numérique du ballottement d'ergol et modélisation de l'interaction fluides-membrane dans un réservoir de satellite / Numerical simulation of propellant sloshing and modelling of fluids-membrane interaction in satellite tanksDalmon, Alexis 12 December 2018 (has links)
Le ballottement dans les réservoirs d'ergols est une des perturbations les plus importantes de la stabilité d'un satellite en orbite. En considérant des manœuvres faiblement inertielles, il n'existe pas de modèle analytique et l'expérimentation nécessite de longues périodes de temps en micro-gravité. Nous nous proposons donc, dans cette thèse, de réaliser des simulations numériques de ce phénomène. L'étude est basée sur le solveur DIVA résolvant les équations de Navier-Stokes diphasiques avec les méthodes level-set et Ghost Fluid. Deux technologies de réservoirs sont à l'étude : les réservoirs classiques, ne contenant que l'ergol liquide et le gaz pressurisant, et les réservoirs à membrane, pour lesquels une membrane hyperélastique sépare les deux fluides. Dans le premier cas, une étude paramétrique complète sur les effets du ballottement lors d'une manœuvre de rotation est menée et les différents régimes d'écoulement obtenus sont décrits par rapport aux paramètres d'études. Par la suite, les données de l'expérience FLUIDICS, envoyée à bord de la Station Spatiale Internationale, sont comparées aux résultats numériques et montrent un très bon accord. Par rapport au second cas, un modèle d'interaction fluides-membrane est développé en s'inspirant de travaux sur la déformation de cellules biologiques. Les déformations et contraintes propres à la membrane sont suivies de façon Eulérienne, les efforts exercés par la membrane sur les fluides environnants en sont déduits et intégrés au solveur diphasique. Les résultats obtenus sont validés par comparaison à des cas-tests de la littérature. / Propellant sloshing in tanks is one of the most important disturbances of satellite stability in orbit. Considering low-inertial manoeuvres, there is no analytical model and experimental facilities require long time period of microgravity conditions. Thus, this PhD thesis aims to predict this phenomenon by numerical simulations. The study is based on the DIVA code which solves the Navier-Stokes equations for two-phase flows with the level-set method and the Ghost Fluid method. Two tank technologies are studied: simple tanks, which only contain the liquid propellant and the gas maintaining the pressure, and diaphragm tanks, for which a hyperelastic membrane separates both fluids. In the first case, a parametric study on the sloshing effects is done considering rotational manoeuvres and the different behaviours observed are described in relation to the study parameters. Thereafter, the data from the FLUIDICS experiment, sent to the International Space Station, are compared to the numerical results and exhibit good agreement. In the second case, a fluids-membrane interaction model inspired from works on the deformation of biological cells is developed. The membrane strains and stresses are computed in an Eulerian way, from which the force exerted by the membrane on the surrounding fluids is deduced and integrated in the two-phase flows solver. The numerical results are validated by comparison with benchmarks from the literature.
|
46 |
Turbulent Mixing of Passive Scalars at High Schmidt NumberXu, Shuyi 13 January 2005 (has links)
A numerical study of fundamental aspects of turbulent mixing has been performed,with emphasis on the behavior of passive scalars of low molecular diffusivity (high Schmidt number Sc). Direct Numerical Simulation is used to simulate incompressible, stationary and isotropic turbulence carried out at high grid resolution. Data analyses are carried out by separate parallel codes using up to
1024^3 grid points for Taylor-scale Reynolds number (R_lambda) up to 390 and Sc up to 1024.Schmidt number of order 1000 is simulated using a double-precision parallel code in a turbulent flow at a low Reynolds number of R_lambda 8 to reduce computational cost to achievable level. The results on the scalar spectrum at high Schmidt numbers appear to have a k^{-1} scaling range.
In the presence of a uniform mean scalar gradient, statistics of scalar gradients are observed to deviate substantially from Kolmogorov's hypothesis of local isotropy, with a skewness factor remaining at order unity as the Reynolds number increases.
However, this skewness decreases with
Schmidt number suggesting that local isotropy for scalars at high Schmidt number is a better
approximation. Intermittency exponents manifested by three types of
two-point statistics of energy and scalar dissipation, i.e., the two-point
correlator (chi(x)chi(x+r)), the second-order moment of local scalar dissipation (chi_r^2) and the variance of the
logarithmic local scalar dissipation sigma^2_{lnchi_r} are discussed.
Several basic issues in differential diffusion between two scalars of different molecular diffusivities transported by the same turbule
nt flow, the physical process of scalar spectral transfer and subgrid-scale transfer are also briefly addressed.
|
47 |
Rotation and non-Oberbeck-Boussinesq effects in turbulent Rayleigh-Bénard convectionHorn, Susanne 30 September 2014 (has links)
No description available.
|
48 |
Numerical studies of turbulent flames in wall-jet flowsPouransari, Zeinab January 2015 (has links)
The present thesis deals with the fundamental aspects of turbulent mixing and non-premixed combustion in the wall-jet flow, which has a close resemblance to many industrial applications. Direct numerical simulations (DNS) of turbulent wall-jets with isothermal and exothermic reactions are performed. In the computational domain, fuel and oxidizer enter separately in a nonpremixed manner and the flow is compressible, fully turbulent and subsonic. The triple “turbulence-chemistry-wall” interactions in the wall-jet flow have been addressed first by focusing on turbulent flow effects on the isothermal reaction, and then, by concentrating on heat-release effects on both turbulence and flame characteristics in the exothermic reaction. In the former, the mixing characteristics of the flow, the key statistics for combustion and the near-wall effects in the absence of thermal effects are isolated and studied. In the latter, the main target was to identify the heat-release effects on the different mixing scales of turbulence. Key statistics such as the scalar dissipation rates, time scale ratios, two-point correlations, one and two-dimensional premultiplied spectra are used to illustrate the heat release induced modifications. Finer small mixing scales were observed in the isothermal simulations and larger vortical structures formed after adding significant amounts of heat-release. A deeper insight into the heat release effects on three-dimensional mixing and reaction characteristics of the turbulent wall-jet flow has been gained by digging in different scales of DNS datasets. In particular, attention has been paid to the anisotropy levels and intermittency of the flow by investigating the probability density functions, higher order moments of velocities and reacting scalars and anisotropy invariant maps for different reacting cases. To evaluate and isolate the Damkohler number effects on the reaction zone structure from those of the heat release a comparison between two DNS cases with different Damkohler numbers but a comparable temperature rise is performed. Furthermore, the wall effects on the flame and flow characteristics, for instance, the wall heat transfer; the near-wall combustion effects on the skin-friction, the isothermal wall cooling effects on the average burning rates and the possibility of formation of the premixed mode within the non-premixed flame are addressed. The DNS datasets are also used for a priori analysis, focused on the heat release effects on the subgrid-scale (SGS) statistics. The findings regarding the turbulence small-scale characteristics, gained through the statistical analysis of the flow have many phenomenological parallels with those concerning the SGS statistics. Finally, a DNS of turbulent reacting wall-jet at a substantially higher Reynolds number is performed in order to extend the applicability range for the conclusions of the present study and figuring out the possible differences. / <p>QC 20150225</p>
|
49 |
Étude expérimentale et numérique du passage de bulles de gaz au travers d’une interface entre deux liquides / Dynamics of air bubbles passing through an interface between two liquidsBonhomme, Romain 19 October 2012 (has links)
Dans le but de prédire l’évolution d’un hypothétique accident au sein d’un réacteur nucléaire, nous nous proposons au travers de cette étude de comprendre la dynamique de bulles de gaz évoluant dans un bain stratifié constitué de deux liquides superposés. Pour ce faire, un dispositif expérimental muni de caméras à haute cadence a été construit afin d’observer en détail la dynamique de bulles d’air isolées et de trains de bulles traversant une interface séparant deux liquides newtoniens immiscibles initialement au repos. En faisant varier la taille des bulles injectées ainsi que les contrastes de viscosité entre les liquides d’un et quatre ordres de grandeur respectivement, ce dispositif a permis d’observer une grande variété de régimes d’écoulement. Dans certaines situations, les bulles de taille millimétrique restent piégées à l’interface liquide-liquide, tandis que les bulles plus grosses parviennent à traverser l’interface, entraînant une importante colonne de liquide lourd derrière elles. Après que l’influence des paramètres physiques a été qualitativement établie à la lumière de modèles simples, des simulations numériques de plusieurs situations sélectionnées ont été réalisées. Celles-ci ont été menées à partir de deux approches basées sur les équations de Navier-Stokes incompressibles, l’une utilisant une technique de capture d’interface, l’autre une description de type « interface diffuse » de Cahn-Hilliard. Les comparaisons entre les résultats expérimentaux et numériques ont confirmé la fiabilité des prédictions numériques dans la plupart des cas, mais ont également souligné le besoin d’améliorer la capture de phénomènes physiques à petite échelle, en particulier ceux liés au drainage de film. / In order to predict the evolution of a hypothetical accident in pressurized water nuclear reactors, this study aims to understand the dynamics of gas bubbles ascending in a stratified mixture made of two superimposed liquids. To this aim, an experimental device equipped with two high-speed video cameras was designed, allowing us to observe isolated air bubbles and bubble trains crossing a horizontal interface separating two Newtonian immiscible liquids initially at rest. The size of the bubbles and the viscosity contrast between the two liquids were varied by more than one and four orders of magnitude respectively, making it possible to observe a wide variety of flow regimes. In some situations, small millimetric bubbles remain trapped at the liquid-liquid interface, whereas larger bubbles succeed in crossing the interface and tow a significant column of lower fluid behind them. After the influence of the physical parameters was qualitatively established thanks to simple models, direct numerical simulations of several selected experimental situations were performed with two different approaches. These are both based on the incompressible Navier-Stokes equations, one making use of an interfacecapturing technique, the other of a diffuse Cahn-Hilliard description. Comparisons between experimental and numerical results confirmed the reliability of the computational approaches in most situations but also highlighted the need for improvements to capture small-scale physical phenomena especially those related to film drainage.
|
50 |
Simulation numérique du reformage autothermique du méthane / Numerical simulation of methane autothermal reformingCaudal, Jean 15 February 2013 (has links)
Le syngas est un mélange gazeux de CO et H2 qui constitue un intermédiaire important dans l’industrie pétrochimique. Plusieurs approches sont utilisées pour le produire. L’oxydation partielle non catalytique (POX) et le reformage à la vapeur (SMR) en font partie. Le reformage auto thermique du méthane (ATR) combine quant à lui ces deux procédés au sein d’un même réacteur. L’amélioration du rendement global du procédé ATR requiert une meilleure caractérisation du comportement des gaz au sein de la chambre. La simulation numérique apparaît comme un outil efficace pour y parvenir. Pour réduire le coût CPU, c'est généralement l'approche RANS (Reynolds Average Numerical Simulation) qui est privilégiée pour la simulation complète de la chambre. Cette approche repose sur l'utilisation de modèles, parmi lesquels le modèle de combustion turbulente, qui a pour objectif de représenter les interactions entre la turbulence et la réaction chimique au sein du mélange. Plusieurs stratégies ont été proposées pour le calculer, qui bénéficient globalement d'une large expérience pour les systèmes classiques mettant en jeu la combustion. Cependant, les flammes observées dans les réacteurs ATR présentent des propriétés assez différentes de ces configurations classiques. La validité des modèles de combustion turbulente classiques doit donc y être vérifiée. L'objectif de cette thèse est de répondre à ce besoin, en testant la validité de différents modèles de combustion turbulente. La première partie du travail a consisté à analyser les propriétés des flammes CH4/O2 enrichies en vapeur d'eau à haute pression, et a notamment permis le développement d’une méthode d’évaluation des temps caractéristiques d’un système chimique. Dans un deuxième temps, une expérience numérique à l’aide d’un code DNS a été réalisée, afin de servir de référence pour tester a priori sur des configurations ATR plusieurs modèles RANS de combustion turbulente couramment utilisés dans le milieu industriel. / Syngas is a gaseous mixture mainly composed of CO and H2, which constitutes a major feedstock in petrochemical industry. Several industrial approaches are commonly used to produce it. Non catalytic Partial Oxidation (POX) and Steam Methane Reforming (SMR) are two of them. Autothermal Reforming (ATR) is a third process that combines both POX and SMR in the same reactor. A better knowledge of the reactive flow properties inside the chamber is required in order to improve the ATR process efficiency. Numerical simulation appears as an efficient tool to reach this goal. Because of the high CPU cost required for these simulations, RANS (Reynolds Average Numerical Simulation) formulation is usually preferred for the simulation of the whole chamber. This approach relies on the use of models, like the turbulent combustion model that aims at describing the interactions between turbulence and chemical reactions. Several approaches have been proposed to compute it, which benefit from a relatively wide experience for the simulation of classical combustion systems. However, ATR flames have some specific properties that make them quite different from these classical configurations, especially because of high pressure, reactants dilution with water and high global equivalence ratio. The validity of classical turbulent combustion models therefore requires to be assessed in ATR configurations. The objective of this thesis is to meet this need by testing the validity of several turbulent combustion models. The first part of this work has been to analyze water-enriched CH4/O2 flames properties at high pressure. In particular, a strategy for evaluating characteristic chemical time scales of a reactive system has been proposed within this context. In a second part, a DNS numerical experiment has been performed. Its results are then used as a benchmark for a priori testing several turbulent combustion models in the context of ATR reactor RANS simulations.
|
Page generated in 0.1529 seconds