Im Rahmen der vorliegenden Arbeit wurde der Einfluss der Korngröße und der Gefügestabilität auf die zyklische Plastizität von mikro- und submikrokristallinem Nickel, hergestellt durch ECAP und PED, untersucht. Zur Gefügecharakterisierung kamen verschiedene elektronenmikroskopische und röntgenographische Methoden zum Einsatz. Die Untersuchungen zur Gefügestabilität zeigten, dass (i) die Stabilität der Korn- und Substruktur bei der zyklischen Verformung empfindlich vom Gefüge im Ausgangszustand abhängt, (ii) generell die Tendenz zur Umwandlung der vorhandenen Substruktur in eine universelle ermüdungstypische Substruktur besteht, diese Transformation jedoch durch die lokale Gefügebeschaffenheit be- bzw. verhindert sein kann und (iii) zur Erklärung des Entfestigungsverhaltens der ECAP-Materialien sowohl die Transformation der Substruktur als auch die Vergröberung der Kornstruktur berücksichtigt werden müssen. Auf der Basis der Ergebnisse der vorliegenden Arbeit und unter Hinzunahme von Resultaten aus der Literatur lassen sich Schlussfolgerungen zum Einfluss der Korngröße auf die zyklische Plastizität in einem vier Größenordnungen umfassenden Korngrößenbereich ziehen. In grob- und feinkörnigem Nickel bilden sich bei der zyklischen Verformung ermüdungstypische Versetzungsstrukturen, deren Abmessungen kaum von der Korngröße abhängen. Der Versetzungslaufweg in diesen Materialien ist wesentlich kleiner als die Kornabmessungen. Dementsprechend besteht höchstens ein schwacher Einfluss der Korngröße auf das sich bei der Wechselverformung einstellende Spannungsniveau. Bei mikro- und submikrokristallinem Nickel, wo der Versetzungslaufweg in der Größenordung der Kornabmessungen liegt, wird ein deutlicher Umschlag bei der Versetzungsmusterbildung und dem zyklischen Verformungsverhalten beobachtet. In diesem Korngrößenbereich entstehen entweder qualitativ andere (D<DS1=5µm) oder keine Versetzungsstrukturen (D<DS2=1µm) und das Spannungsniveau steigt mit sinkender Korngröße entsprechend einer HALL-PETCH-Beziehung.

Industrial products of high-strength Al-alloys are currently manufactured by thermo-mechanical processes, which are only applicable in the integrated plants requiring high investment cost. Moreover, reduction of the average grain size not less than 10 &mu / m and re-adjustment of process parameters for each alloy type is evaluated as disadvantage. Therefore, recently there have been many research studies for development of alternative manufacturing techniques for aluminum alloys. Research activities have shown that it is possible to improve the strength of Al-alloys remarkably by severe plastic deformation which results in ultra-fine grain size. This study aims to design and manufacture the laboratory scale set-ups for severe plastic deformation of aluminum alloys, and to characterize the severely deformed samples. The stages of the study are summarized below: First, for optimization of die design and investigation of parameters affecting the deformation finite element modeling simulations were performed. The effects of process parameters (die geometry, friction coefficient) and material properties (strain hardening, strain-rate sensitivity) were investigated. Next, Equal Channel Angular Pressing (ECAP) system that can severely deform the rod shaped samples were designed and manufactured. The variations in the microstructure and mechanical properties of 2024 Al-alloy rods deformed by ECAP were investigated. Finally, based on the experience gained, a Dissimilar Channel Angular Pressing (DCAP) system for severe plastic deformation of flat products was designed and manufactured / then, 6061 Al-alloy strips were deformed. By performing hardness and tension tests on the strips that were deformed by various passes, the capability of the DCAP set-up for production of ultra-fine grain sized high-strength aluminum flat samples were investigated.

Magnesium alloys have poor formability at room temperature, due to a limited number of slip systems owing to the hexagonal closed packed structure of magnesium. One possibility to increase the formability of magnesium alloys is to refine the grain size. A fine grain magnesium alloy shows high strength and high ductility at room temperature, hence an improved formability. In addition to grain refinement, the formability of Mg alloys can be improved by controlling crystallographic texture. Severe plastic deformation (SPD) processes namely, equal channel angular pressing (ECAP) and multi-axial forging (MAF) have led to improvement in room temperature mechanical property of magnesium alloys. Further, it has been reported that by adding rare earth elements, room temperature ductility is enhanced to nearly 30%. The increase in property is attributed to crystallographic texture. Many rare earth elements have been added to magnesium alloys and new alloy systems have been developed. Amongst these elements, Ce addition has been shown to enhance the tensile ductility in rolled sheets at room temperature by causing homogeneous deformation. It has been observed that processing of rare-earth containing alloys below 300°C is difficult. Processing at higher temperatures leads to grain growth which ultimately leads to low strength at room temperature. The present thesis is an attempt to combine the effect SPD and rare earth addition, and to examine the overall effect on microstructure and texture, hence on room temperature mechanical properties. In this thesis, Mg-0.2%Ce alloy has been studied with regard to the two SPD processes, namely, ECAP and MAF. The thesis has been divided into six chapters. Chapter 1 is dedicated to introduction and literature review pertaining to different severe plastic deformation processes as applied to different Mg alloys. Chapter 2 includes the details of experimental techniques and characterization procedures, which are commonly employed for the entire work. Chapter 3 addresses the effect of ECAP on the evolution of texture and microstructure in Mg-0.2%Ce alloy. ECAP has been carried out on two different initial microstructure and texture in the starting condition, namely forged and extruded. ECAP has been successfully carried out for the forged billets at 250°C while cracks get developed in the extruded billet when ECAP was done at 250°C. The difference in the deformation behaviour of the two alloys has been explained on the basis of the crystallographic texture of the initial materials. The microstructure of the ECAP materials indicates the occurrence of recrystallization. The recrystallization mechanism is identified as “continuous dynamic recovery and recrystallization” (CDRR) and is characterized by a rotation of the deformed grains by ~30⁰ along c-axis. The yield strengths and ductility of the two ECAP materials have been found quite close. However, there is a difference in the yield strength as well as ductility values when the materials were tested under compression. The extruded billet has the tension compression asymmetry ~1.7 while the forged material has the asymmetry as ~2.2. After ECAP, the yield asymmetry reduces to ~1 for initially extruded billet, while for the initially forged billet the yield asymmetry value reduces to ~1.9. In chapter 4, the evolution of microstructure and texture was examined using another severe plastic deformation technique, namely multi axial forging (MAF). In this process, the material was plastically deformed by plane strain compression subsequently along all three axes. In this case also two different initial microstructures and texture were studied, namely the material in as cast condition and the extruded material. The choice of initial materials in this case was done in order to examine the effect of different initial grain size in addition to different textures. By this method, the alloy Mg-0.2%Ce could be deformed without fracture at a minimum temperature of 350⁰C leading to fine grain size (~3.5 µm) and a weak texture. Grain refinement was more in the initial cast billets compared to the initial extruded billet after processing. The mechanism of grain refinement has been identified as twin assisted dynamic recrystallization (TDRX) and CDRR type. The mechanical properties under tension as well as under compression were also evaluated in the present case. The initially extruded billet has shown low tension compression asymmetry (~1.2) than cast billet (~1.9), after MAF. Chapter 5 addresses the exclusive effect of texture on room temperature tensile properties of the alloy. Different textures were the outcomes of ECAP and MAF processes. In this case, in order to obtain an exact role of texture, a third of deformation mode, rolling, was also introduced. All the processed materials were annealed to obtain similar grain size but different texture. A similar strength and ductility for ECAP and MAF, where the textures were qualitatively very different, was attributed to the fact that texture of both the ECAP and MAF processed materials, was away from the ideal end orientation for tensile tests. In chapter 7, the final outcomes of the thesis have been summarized and scope for the future work has been presented.

Aufgrund ihrer herausragenden Eigenschaften haben ultrafeinkörnige Werkstoffe, die aus konventionellen normalkörnigen Halbzeugen über eine extrem große Kaltverformung hergestellt wurden, in den letzten zwei Jahrzehnten zunehmend an Bedeutung erlangt. In der vorliegenden Arbeit wird das Fließspannungsverhalten eines Reinaluminiumwerkstoffes (EN AW-1070 – Al99,7) und einer ausscheidungshärtbaren Aluminiumlegierung (EN AW-6060 – AlMgSi) mit Korngrößen von bis zu 660 nm und 310 nm in einem weiten Bereich von Dehnungen und Dehnraten analysiert und mit den zzt. existierenden Modellvorstellungen zu den mikrostrukturellen Abläufen in Verbindung gebracht. Um die Voraussetzung zur Herstellung von ultrafeinkörnigen Werkstoffen zu schaffen, wurden mehrere Werkzeugprototypen für die ECAP-Umformung im Labormaßstab entwickelt und erprobt. Die Untersuchungen zum Fließspannungsverhalten erfolgten anhand von Zug- und Druckversuchen über insgesamt sieben Dekaden der Dehnrate bis in den Bereich der hochdynamischen Belastung von 10^3 s^-1. Die Tests zeigen, dass das Fließspannungsverhalten ultrafeinkörniger Aluminiumwerkstoffe vollständig mithilfe der thermisch aktivierbaren Mechanismen erklärbar ist, wobei Ausscheidungen eine wichtige Rolle spielen. / Because of their exceptional properties ultrafine-grained materials, processed from conventional polycrystalline materials by severe plastic deformation, have gained increasing scientific and industrial interest during the last two decades. Based on the concept of work-hardening for f.c.c. metals the commercially pure aluminium AA1070 (Al99,7 – soft annealed) and the aluminium alloy AA6060 (AlMgSi – peak aged) were investigated. ECAP was used to introduce very high strains and an ultrafine-grained microstructure with grain sizes down to 660 nm and 310 nm. Subsequently compression and tensile tests were performed in a wide range of strain rates over seven decades up to the range of impact loading of 10^3 s^-1. The results indicate that strain path and the corresponding dislocation structure is important for the post-ECAP yielding and the following hardening response. Furthermore the precipitates of the AA6060 clearly constrain the interactions of dislocations in work-hardening stage III – causing lower strain rate sensitivity. If compared to the AA1070 they avoid hardening in stage V where an additional rate and temperature depending effect contributes – caused by the interaction of deformation induced vacancies and dislocations. The results indicate that the strain-hardening behavior can be described by thermal activated mechanisms.

The thesis deals with principles and common applications of the electron backscatter diffraction (EBSD) method. Some practical experience in application of the method to a study of highly deformed structure of copper and its thermal stability is described on one hand, and, on the other hand, to a study of phase composition of TRIP steel on various levels of imposed strain. The limitations of EBSD method are discussed along with its resolution in comparison with other complimentary techniques.

L'objectif de cette thèse est l'étude de nouvelles formes d'activation de matériaux à base de MgH2 en vue du stockage réversible de grandes quantités d'hydrogène. La température assez élevée de la réaction du magnésium à l'hydrogène est considérée être un frein à de nombreuses applications. Ici, de nouveaux alliages de formule Ca-Mg-Ni ont été élaborés pour permettre de travailler à des températures plus basses. Cependant leur capacité de stockage reste plus faible quoique déjà meilleure que la référence LaNi5. Sachant que la cinétique d'hydruration est favorisée dans des matériaux présentant une microstructuration très fine voir une taille de grains nanométrique, un travail pionnier a été réalisé en utilisant le procédé d'extrusion ECAP, en référence au procédé standard par "ball milling". L'hydruration des matériaux extrudés a ensuite été mise en œuvre de façon convaincante. Si le broyage de MgH2 avec additifs de type métaux de transition conduit à des cinétiques de sorption rapides avec la création de cristallites nanostructurés, la réduction de la taille des interfaces avec les particules d'additif a été simulée à partir de couches nanométriques déposées par DLP afin de tenter de mieux comprendre le phénomène d'activation rentrant en jeu lors de l'hydruration du magnésium. Enfin, l'étude d'hydrures ternaires métastables élaborés à hautes températures et sous hautes pressions a été effectuée afin d'analyser l'activation du magnésium atomiquement "dopé" de façon structurale.

<div>Electrical nerve stimulation (ENS) is an emerging therapy for many neurological disorders. Compared with conventional one-way stimulations, closed-loop ENS approaches increase the stimulation efficacy and minimize patient's discomfort by constantly adjusting the stimulation parameters according to the feedback biomarkers from patients. Wireless neurostimulation devices capable of both stimulation and telemetry of recorded physiological signals are welcome for closed-loop ENS systems to improve the quality and reduce the costs of treatments, and real-time digital signal processing (DSP) engines processing and extracting features from recorded signals can reduce the data transmission rate and the resulting power consumption of wireless devices. Electrically-evoked compound action potential (ECAP) is an objective measure of nerve activity and has been used as the feedback biomarker in closed-loop ENS systems including neural response telemetry (NRT) systems and a newly proposed autonomous nerve control (ANC) platform. It's desirable to design a DSP engine for real-time processing of ECAP in closed-loop ENS systems. </div><div><br></div><div>This thesis focuses on developing the DSP architecture for real-time processing of ECAP, including stimulus artifact rejection (SAR), denoising, and extraction of nerve fiber responses as biomedical features, and its VLSI implementation for optimal hardware costs. The first part presents the DSP architecture for real-time SAR and denoising of ECAP in NRT systems. A bidirectional-filtered coherent averaging (BFCA) method is proposed, which enables the configurable linear-phase filter to be realized hardware efficiently for distortion-free filtering of ECAPs and can be easily combined with the alternating-polarity (AP) stimulation method for SAR. Design techniques including folded-IIR filter and division-free averaging are incorporated to reduce the computation cost. The second part presents the fiber-response extraction engine (FREE), a dedicated DSP engine for nerve activation control in the ANC platform. FREE employs the DSP architecture of the BFCA method combined with the AP stimulation, and the architecture of computationally efficient peak detection and classification algorithms for fiber response extraction from ECAP. FREE is mapped onto a custom-made and battery-powered wearable wireless device incorporating a low-power FPGA, a Bluetooth transceiver, a stimulation and recording analog front-end and a power-management unit. In comparison with previous software-based signal processing, FREE not only reduces the data rate of wireless devices but also improves the precision of fiber response classification in noisy environments, which contributes to the construction of high-accuracy nerve activation profile in the ANC platform. An application-specific integrated circuit (ASIC) version of FREE is implemented in 180-nm CMOS technology, with total chip area and core power consumption of 19.98 mm² and 1.95 mW, respectively. </div><div><br></div>

ヘテロ構造組織を有する鉄・非鉄金属の組織形態に注目して,微視的構造やその挙動が巨視的現象(変形特性,成形性)として発現するメカニズムを解明することを目的とした.鉄系金属ではDual Phase型高張力鋼のスプリングバック現象のひずみ速度依存性,非鉄系金属では半凝固鋳造法と強ひずみ加工を組み合わせた亜共晶アルミニウム合金の衝撃後方押出し成形性に注目した.これらの検討によりいずれの試料においても,結晶粒界よりもスケールの大きいヘテロ構造に由来した変形機構が支配的であることが明らかになった. / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University